Using 'TAIL([Time].[Time].[Year].MEMBERS,1)' I can get the current year dynamically. My question is how do I get the previous two years dynamically as well. I've tried a few different ways with no luck. As you can see below I'd like to replace 2014 and 2013 with current year -1 and current year -2.
SELECT
{
[Time].[Time].[Year].&[2013],
[Time].[Time].[Year].&[2014],
TAIL([Time].[Time].[Year].MEMBERS,1)
}ON COLUMNS,
NON EMPTY
{[Branches].[Branches].[Region]*[Measures].[Ship Resale S&D Run Rate]} ON ROWS
FROM SALES
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |... Orders -> id | idCustomer | date | ... Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total FROM Products INNER JOIN Orders ON Orders.id = Products.idOrder INNER JOIN Customers ON Customers.id = Orders.idCustomer WHERE year(date)=2014 GROUP BY customers.name ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015) -------- customer A | 1000$ | 2000$ | 3000$ customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
What this does is, it calculates the median of the medians over the period of 3 years. But, what I'm looking for is the overall median of the underlying measure over a period of 3 years.
Which works fine for all my other calculations except this, where I need a distinct count. CNT is a calculated measure. The browser would look like this:
Category Year1 Year2 ..... MDX what I have now MDX what I need
I already read a lot about the inscope-function and how it is used to display variances over time periods. But I don't know where to start, as there is no tutorial how to setup this functionality. What I want to display within the report is the following:
Code Snippet
Months ProductGroup Article Year 1 2 3 4 5 .... Bicycles 1020 2007 1500 2000 etc. 2008 3000 3000 Var. abs. 1500 1000 Var. % 100% 50% 1025 2007 0 1000 2008 500 1200 Var. abs. 500 200 Var. % 500% 20% Motorcycles etc.
am making a CV program and i need a way to count the experience the user has: i have his begin date and end Date as datetime in an sql server. i can do it programicly but i prefer to do it at the sql side the question: how can i get how much exp he has aka : SUM(DATEDIFF(year , JobApExp.BeginDate , JobApExp.EndDate )) but for all the datarow (he has more than one BeginDate and EndDate (for each job he has one)) P.S i want to be able to use it in a where clause : select * from jobap where -- or HAVING JobAp.ind = JobApExp.JobAp AND SUM(DATEDIFF(year , JobApExp.BeginDate , JobApExp.EndDate )) > CONVERT(int,@Exp) thanks in advance
Hi, i'm reasonably new to reporting services and am looking for a way to split my reports' Years to compare the months in year 2005 to 2006 but i can't get my data nest to one another in a single line, it splits the years into different rows
as an example this is what i want if you can decipher that
2005 2006 Growth 2005 Year to Date 2006 Year to Date Year to Date Growth
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.* FROM PRODUCT A CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1]( [TestTable1_pk] [int] IDENTITY(1,1) NOT NULL, [Source_ID] [int] NOT NULL, [Edition_fk] [int] NOT NULL, [Key1_fk] [int] NOT NULL, [Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car where Price=@Price1 or Price=@price2 or Price=@price=3 and where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3 and where Model=@Model1 or Model=@Model2 or Model=@Model3 and where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
I concatenate multiple rows from one table in multiple columns like this:
--Create Table CREATE TABLE [Person].[Person_1]( [BusinessEntityID] [int] NOT NULL, [PersonType] [nchar](2) NOT NULL, [FirstName] [varchar](100) NOT NULL, CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part | 1 | RAM 2 | Disk Drive 10| CPU 11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive| ---------------------------------------------- A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item SELECT SYSTEM PART FROM System Info WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
I have created a single FULLTEXT on col2 & col3. suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1 ON
TBL.col1=TBL1.[key] INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2 ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information. for e.g.; i was thinking to concatinate both fields like col4= ABengineBA + ABBToyotaBBA and in search i use SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key] Result = 1 row
But it don't work in following scenario col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4 FROM
TBL INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1 ON
TBL.col1=TBL1.[key]
Result=0 Row Any idea how i can write second query to get result?
I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.
if n1<10 and n2<10 then i=i + 1 if n4-n3=1 then i=i + 1 if more than 2 consecutive numbers then i=i + 1
So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.
declare @test1 int set @test1=0 select top 10 n1,n2,n3,n4,n5,n6, case when ( n1=2 and n2>5 ) then @test1+1 else @test1 end as t2 from allNumbers
I want to search in fulltextindexes for multiple searchterms in multiple columns. The difficulty is: I don't want only the records with columns that contains both searchterms. I also want the records of which one column contains one of the searchterm ans another column contains one of the searchterms.
For example I search for NETWORK and PERFORMANCE in two columns. Jobdescr_________________________|Jobtext Bad NETWORK PERFORMANCE________|Slow NETWORK browsing in Windows XP Bad application PERFORMANCE_______|Because of slow NETWORK browsing, the application runs slow.
I only get the first record because JobDescr contains both searchterms I don't get the second record because none of the columns contains both searchterms
I managed to find a workaround:
SELECT T3.jobid, T3.jobdescr FROM (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'network*') or CONTAINS(jobtext, 'network*') ) T1 INNER JOIN (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'performance*') or CONTAINS(jobtext, 'performance*')) T2 ON T2.Jobid = T1.Jobid INNER JOIN (SELECT jobid, jobdescr FROM dba.job) T3 ON T3.Jobid = T1.Jobid OR T3.Jobid = T2.JobId It works but i guess this will result in a heavy database load when the number of searchterms and columns will increase.
I have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I previously posted a problem with result set bindings but I have not been able to resolve my problem. I guess all this comes with being new to programming in this environment! Anyway, I am trying to figure out how to process from an ADO.NET connection multiple rows with multiple columns. I have to read and manipulate each row. I was originally looking at using a foreach loop but have not been able to get it to work. One reply to my previous thought I should be using a data task to accomplish this. Could someone tell me the best way to handle this situation? As a note, I am new to programming in SSIS and basically trying to learn it as I go so please bear with me! Thanks in advance!
I am trying to count the columns of a MDX query but I haven't yet found a solution. Below is the query
SELECT NON EMPTY Hierarchize({DrilldownLevel({[Customer].[Customer].[All]},,,INCLUDE_CALC_MEMBERS)}) ON COLUMNS FROM [XCUBE] WHERE ( [TIME].[Year Quarter Month].[Quarter Name].&[Quarter 1, 2015], [CustomerType].[CustomerType].&[Money], [Measures].[Total X] )
With result as
All r k l j g l 7000 1 7 8 5 4 3
The All counts the total of the [Measures].[Total X] and I want to measure the number of columns that presented at the result. Unfortunately my dimension Customers doesn't connect with time dimension...
I need to show the dimensions of my model like columns in the result. I have this query
with member [Measures].[Customer] as [Customers].[Customer].CURRENTMEMBER.Name member [Measures].[UCs] as [UCs].[UC].CURRENTMEMBER.Name member [Measures].[Order Type] as [Order Types].[Order Type].CURRENTMEMBER.Name member [Measures].[UC Dates] as [UC Dates].[UC Date].CURRENTMEMBER.Name
I want to display Month and year from same time hierarchy in two separate columns.My hierarchy is as below:
Ship Date > Ship Date Hierarchy Ship Date year Ship Date Quarter Ship Date month The display I am looking for is as below Ship Date year Ship Date Month measures 2015 Jan 200 2015 Feb 300
I am using Tail function as I need only the last 13 months, below is my query:
with set [Month] as { tail([SHIP DATE].[Ship Date Hierarchy].[SHIP CAL MTH].members, 13) } select {[Measures].[TAG BUID Distinct Count]} on 0, {[Month]* [SHIP DATE].[Ship Date Hierarchy].[SHIP CAL YEAR]} on 1 from [GSDR_P4]
This gives me error that The Ship Date Hierarchy hierarchy is used more than once in the Crossjoin function.
Is there a way to delete from multiple tables/views a column with a specificname? For example, a database has 50 tables and 25 views all have a columnnamed ColumnA. Is it possible to write a simple script that will deleteevery column named ColumnA from the database?Seems to be it would be possible and I can somewhat vision it usingsysobjects but without wanting to spend too much time generating the script(when I could in shorter time manually delete) thought I'd pose the question.Thanks.
I am have a dimension to use as a slicer, I am trying to associate that dimension with a measure group using a calculated measure. I am using the below query:
Not sure where the culprit is for this error propping up. I've added a new measure group and Im trying to generate the schema for the resulting fact table, but something isn't right. However, I don't think its my new measure group that's causing the issue, because I removed it and still get this issue when I select Database > Generate Relational Schema
I'm new to MDX, and most of the time I customize existing queries rather than writing new ones. I currently have a MDX query like this
SELECT [Measures].[Fees Billed] on 0, except([Age].[Day Buckets].members, {[Age].[Day Buckets].[All], [Age].[Day Buckets].&[Unknown]}) on 1 FROM MyCube WHERE ([Fiscal Period].[Fiscal Year].&[2015], [Customer].[City].&[Auckland] )
Which brings the fees billed by age buckets where the customer's city is Auckland. I also have another dimension called [Sales Agent] with a member [City] in it, and there is a member in [Customer] called [Customer].[Sales Agent]
I am trying to retrieve the same information where the customer's sales agent's city is Auckland rather than the customer's city.
If it is SQL, I will join Customer and SalesAgent on Customer.SalesAgentUno = SalesAgent.SalesAgentUno and bring in the desired data. Any way in MDX to do this?
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select Test_Name AS 'Test_Name', Table_Bird.Animal AS 'Birds', Table_Mammal.Animal AS 'Mammal', Table_Reptile.Animal AS 'Reptile, Table_Fish.Animal AS 'Fish' From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
I am trying to select some values as default for a parameter, I add my data set,add my parameter then I select the values in the default pane, when I run the report I get :
'the default value expression for the query parameter contains an error[BC30451] name is not declared.
When I look at the expression of the default parameter (in the report data pane under the specify values) it appears like
=new Object() {[Sty].[ST].&[1], [Sty].[ST]..&[15]} with a red scrible under the ()
