Analysis :: MDX SSRS Parameter In Case Statement?
Nov 3, 2015
I am trying to calculate a measure based on parameter passed I have a liquidation rate of amount/facevalue when the dimension attribute is 'all' and i will like to the 'amount' to change based on the parameter passed and the 'facevalue' should not changed , i tried with the code below.
What I noticed is when i add a calculated member to return the currentmember of the cell member
measures.strat
as
[Strategy].[ICS].CURRENTMEMBER.uniquename
it comes back as
[Strategy].[ICS].[All]
even when I changed the default value for the parameter to another member like red
WITH
MEMBER
MEASURES.TEST
AS
((
CASE
WHEN [Strategy].[ICS].CURRENTMEMBER.uniquename = '[Strategy].[ICS].[All]'
THEN
[Measures].[Measures].[AMOUNT]
[code]....
View 4 Replies
ADVERTISEMENT
Aug 17, 2010
I want to create a parameter in SSRS and use it in the MDX query.But when i am trying to access the parameter , the resultset is returned blank.I want to get only the logo matching the customer number.parameter field is a double type. Below is the query listed.
With
Member [Measures].[Logo1] AS
Case
When IsEmpty([Client].[Logo].MemberValue ) Then 'logo-chemwatch.jpg'
When len([Client].[Logo].MemberValue)=0 Then 'logo-chemwatch.jpg'
Else
([Client].[Logo].MemberValue)
End
SELECT {[Measures].[Logo1] } ON COLUMNS, { ( [Client].[Logo].[Logo].ALLMEMBERS)} ON ROWS FROM [Chem Watch]
Where [Client].[Customer No].[Parameters!Location.Value]
View 8 Replies
View Related
Sep 21, 2015
I am facing some issues with parameter in SSRS reports that when my parameter contains the space then i get the syntax error can be seen below.If i choose any other parameter value which do not contains the space then it works well. I am using SSAS cube as a data source.
View 4 Replies
View Related
Jul 30, 2007
Hi,
How to define the case statement for a particular field in the Report .
I have to add this case statement
CASE Reason
WHEN 1 THEN 'A'
WHEN 2 THEN 'H'
WHEN 3 THEN 'B
WHEN 4 THEN 'C'
WHEN 5 THEN 'D'
WHEN 6 THEN 'E'
ELSE NULL
END
can you please help me in this
Thanks
Dinesh
View 6 Replies
View Related
Jul 13, 2015
I need to run a different select statement based on the value of a parameter. Visual studio is not liking how I am formatting it.
SELECT mc.CtrlID, mc.PrtfID, mc.PrtfTyp, mc.City, mc.STATE, mc.U_O_AND_M, mc.CHBBal, mc.IRG_Number, mc.PrtfName, mc.LnID, mc.UPB, mc.UPB_Master_Loan, aa.Prtf_FNMA_FHLMC_Other , aa.ReportingSummar
FROM vw_XXX_GIAC mc
INNER JOIN vw_XXX_InvestorMatrix aa on mc.CtrlID = aa.CtrlID
WHERE
case when
@PortfolioID=1 THEN aa.Prtf_FNMA_FHLMC_Other ='FNMA'
@PortfolioID=2 THEN aa.Prtf_FNMA_FHLMC_Other ='FHLMC'
@PortfolioID=3 THEN aa.Reporting Summar ='FLOW'
END
View 2 Replies
View Related
Jun 3, 2008
I am working on a Function that takes multiple parameters. I have a query that populates a temporary table, and then it processes some logic. My question is, if the parameter is passed as null, I dont want the query to be affected by this null value. Rather, I would like to not pass it at all to the query. So if the parameter is NULL, dont pass it through the query. I have the following but its not compiling right:
SELECT bom.pEngr_BOM_ID , bom.fEngr_Item_ID, det.pEngr_BOM_Detail_ID, 1, bom.Bill_Type, bom.Rev_Ltr, bom.Series_Ltr
FROM dbo.Engr_BOM_Control bom WITH (nolock)
INNER JOIN dbo.Engr_BOM_Detail det WITH (nolock)
ON det.fEngr_BOM_ID=bom.pEngr_BOM_ID
WHERE bom.pEngr_BOM_ID=@v_pEngr_BOM_ID
AND det.fEngr_BOM_ID=@v_pEngr_BOM_ID
CASE WHEN @v_Bill_Type IS NOT NULL THEN
AND bom.Bill_Type=@v_Bill_Type
END
View 3 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Apr 24, 2007
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
View 1 Replies
View Related
Aug 21, 2015
I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter.
How do I know , when this parameter is coming in the preview ?
View 5 Replies
View Related
Jan 30, 2007
Hi,
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1
available values: from query
default values: non query (specify a value "<None>")
Parameter 2
available values: Non query (no value specified)
default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
Thanks.
Kong
View 6 Replies
View Related
Feb 4, 2008
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
View 4 Replies
View Related
Apr 22, 2015
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
View 3 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Mar 17, 2006
Hi,
I am not sure this is the correct place to post this
question, but here it is. I am trying to pass some parameters to SSIS
from a report using the report parameter, then SSIS will create the
datareaderdest and return to the report to use.
Anyone have any idea, guidance or leads please share it out. Thanks in advance.
Daren
View 9 Replies
View Related
Sep 2, 2015
I've see twice this year two different companies either already or planning on having ssas and ssrs running on the same server.
View 7 Replies
View Related
Sep 22, 2015
Im using , FORMAT_STRING="###,###.##" on the definition of a calculated member. When testing the query in SSMS, the formatting looks right, but when I run the query in SSRS it looks like its not coming over. I suppose I can apply my own formatting on the report, but im just wondering if this is by design or lack of ?
View 3 Replies
View Related
Jul 20, 2005
Hi, I can't seem to get this where clause to function as I wish.. must besomething simple but I can't see it!have triedac.coursename like CASE @course WHEN null THEN '%' ELSE '%' + @course + '%'ac.coursename like CASE @course WHEN '' THEN '%' ELSE '%' + @course + '%'ac.coursename like CASE len(@course) WHEN 0 THEN '%' ELSE '%' + @course +'%'All work fine when I enter something in the parameter, but not when I leaveit blank! Any ideas why this is the ...case?Cheers!Chris
View 6 Replies
View Related
May 1, 2007
Hi all,
Hopefully someone can point me in the correct direction as to how best to implement this.
I'm looking to build a report in analysis services which connects to an analysis cube. Its a simple report showing a session count value by procedure type. What i'd like to do however is to show only data for the last 3 months.
I assume that i select the measure group i want to show (in this case {Session Count}) and then the relevant dimensions ({Procedure}, {Site}, {Session Date.Calander}) I've set up a Matrix on the report itself and added the measure group and Procedure dimension. I want to be able to choose the {Site} as a parameter. The problem i am having is how to show only the data from the last 3 months, either from the current date or from a date specified as a parameter.
I hope this makes sense. Any help people can give will be most appreciated.
Cheers,
Grant
View 7 Replies
View Related
Oct 1, 2015
i would like to pose a question, when a user do a login in SSRS server,is it possible to pass the username to SSAS tabular, to implement security? I've tested using USERNAME() creating a role that relates USERNAME() with a dim user username, but now i need to implement it with the username used in SSRS server.
View 2 Replies
View Related
Aug 13, 2015
For example, I have a Date dimension with attributes like Current Day and Current Month. If I run the following, I get exactly what I expect: a list of the days in the current month.
select
NULL on 0,
[Case - Date - PSPT Entry].[Year - Quarter - Month].[Date] on 1
from [Customer Support]
where
[Case - Date - PSPT Entry].[Current Month].&[True]
When I run the following, I'm getting a list of the days in the current month *plus the first couple days of the next month*. with
set [Days of Interest]
as
filter([Case - Date - PSPT Entry].[Year - Quarter - Month].[Date], [Case - Date - PSPT Entry].[Current Month].&[True])
select
NULL on 0,
[Days of Interest] on 1
from [Customer Support]
View 2 Replies
View Related
Jun 25, 2015
I don't have much knowledge on MDX queries. Here, requirement is to get the data less than the date passed from the parameter(Date - IV Financial].[calendar YQMD].[Date]).
I am able to create the below query(through Query designer) which is giving the data EQUALS to operation. But, I need the same with LESS THAN.
SELECT NON EMPTY { [Measures].[InventTrans Quantity] } ON COLUMNS,
NON EMPTY { ([Items].[Item Id].[Item Id].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM ( SELECT ( STRTOSET(@DateIVFinancialCalendarYQMD, CONSTRAINED) ) ON COLUMNS
FROM ( SELECT ( { [Inventory].[Is posted].&[Posted] } ) ON COLUMNS
[Code] ....
View 3 Replies
View Related
Jul 22, 2015
All I did was change the names on two measures in a measure group, tried to refresh the DSV and ka-blooey!
'column' argument cannot be null parameter name:column
View 3 Replies
View Related
Nov 5, 2015
I am trying to select some values as default for a parameter, I add my data set,add my parameter then I select the values in the default pane, when I run the report I get :
'the default value expression for the query parameter contains an error[BC30451] name is not declared.
When I look at the expression of the default parameter (in the report data pane under the specify values) it appears like
=new Object() {[Sty].[ST].&[1], [Sty].[ST]..&[15]}
with a red scrible under the ()
View 9 Replies
View Related
May 27, 2015
I have a requirement to show the parent value which is passed and also all the leaf member details in MDX. For example in Adventure works, if I pass Bikes as the value in MDX, the results should display Bikes along with All the child member names as a measure value in SSAS MDX. I only have one hierarchy with Product Category-> Subcategory-> Product.
I am trying to use the following MDX but I am getting all the members. I need to get only Bikes in my report.
WITH MEMBER [Prod_Passed] AS SETTOSTR(AXIS(1))
MEMBER [Prod_Child] AS DESCENDANTS ([Dim Product].[Hierarchy].CURRENTMEMBER,,LEAVES).item(0).NAME
MEMBER [Child_Value] AS ([Dim Product].[Hierarchy].CURRENTMEMBER,[Measures].[Sales Amount])
SELECT [Dim Product].[Hierarchy].[Product Category].&[1] * [Dim Product].[Product Key].[Product Key].MEMBERS ON ROWS,
{[Measures].[Sales Amount],[Prod_Passed],[Prod_Child],[Child_Value]} ON COLUMNS FROM
[AdvWorks]
View 10 Replies
View Related
Nov 11, 2015
I am trying to write a query for the default values for month, and I am stuck in bringing out only the parameter values, the query I have , brings back the month on row and value on column, and I am trying to get the value out. and will ssrs accept it as a valid expression for a default value
WITH
MEMBER
[MEASURES].[PARAMETERVALUE]
AS
[Account].[Month Short Name].CURRENTMEMBER.UNIQUENAME
[Code] .....
I tried using the exp
=Parameters!MONTH.Value(0)
so as to return the first parameter in the parameter dataset , but i have the error the expression that ref the parameter MONTH does not exists in the parameter collection.
View 2 Replies
View Related
Jan 18, 2008
I am trying to use a case statement in one of my stored proc but I am stuck a little bit.Here is a example, something like:declare @id int set @id =1case @id When 1 then select * from contactsend case but this keeps on giving me error: Incorrect syntax near the keyword 'case'. Any help is appreciated!
View 7 Replies
View Related
Apr 22, 2008
Hi I have some question regarding the sql case statment.Can i use the case statement with the where clause.Example: SELECT FirstName, IDFROM myTablewhere case when ID= '123' then id = '123' and id='124' endorder by idBut the above code does not work.
View 9 Replies
View Related
Jun 2, 2005
Hi all,
I was wondering if there is any way in an sql statement to check whether the data your trying to get out of the DB is of a particular type, ie. Int, char etc. I was thinking about a case statement such as
<code>
CASE WHEN (MyNum <> INT) then 0 end AS MyNum
</code>
This has to be included in the sql statement cause I need this field to get other data.
Any thoughts on how to achieve this would be greatly appreciated.
If I’m in the wrong thread section please advise of best one to get help in.
View 1 Replies
View Related
Sep 17, 2005
Hi !!!i hope one of the sql specialists answer me about the best and most effeceint way to acheive what i am looking for Scenario:-------------i have a 3 tables related to each other Addresses, Groups and GroupAddressthe relation is for both addresses and groups is one to many in the GroupAddress.the behaviour in the application : user can add addresses to his address list and from the address list a user can add an address to many groups like if you have Group name "Freinds" and you add me in it and you have Football team group and you add me to it like that !!!not i have another function called "copy group"in the GroupAddress i have this data as example GroupID AddressID1 41 61 21 441 72 82 62 93 133 73 10and the group ID called "Freinds"i want to copy the group so i can have another group that has the same addresses by one click rather than collectiong them again one by one ...by the way the new copy will have a new group name ( as this is thebusiness logic so user can not have dupicate group name )so what is the best SQL statement that i need to copy the group ???i hope that clear enough!
View 2 Replies
View Related
