Analysis :: Opening Port For SSAS Sever
Aug 13, 2015
I'm trying to make a SSAS default instance available over the internet. I've opened the 2383 port on the server, and I can access it through SSMS using the local ip. I've also attempted to open and map the port on my router, and if I go to [URL] .... it says it's open. If I turn off the server, it says the port is closed, so I think it's routing correctly to the server.
However, when I plug my internet IP address into SSMS, it says
"A connection cannot be made. Ensure that the server is running. No connection could be made because the target machine actively refused it IPADDRESS:2383"
It says the same thing if I give it a random, closed port.
View 3 Replies
ADVERTISEMENT
May 30, 2015
I would like to know the best practice for running analysis service in terms of port usage. Is it better to run on a specific port or have dynamic ports ? We have clustered servers that run default on 2383 but not sure with non clustered what's the best way to get performance.
View 2 Replies
View Related
Jun 21, 2015
SQL Server 2012 two node single instance cluster.
For DB access from application severs, do we need to open port (1433) for NODE IPs too ?
Or is it enough if we open the port 1433 only for VIRTUAL IP ?
View 4 Replies
View Related
Nov 23, 2015
We have 2 clustered SQL instances (2 physical servers in each cluster). Instance2 needs to be setup as a linked server on Instance1.
At this time port 1433 between them is not open. I am referring to the port on the network switch, not in the Windows Firewall (ports in Windows Firewall are already open).
Is opening the port between virtual IP-s sufficient? Or does port need to be open between all physical source/destination IP-s as well?
View 12 Replies
View Related
Jul 28, 2007
My first question is can I run Analysis Services 2005 on a different server to where the databases are running
If yes, any pointers to some articles.
View 1 Replies
View Related
Oct 11, 2015
How to correctly open Multidimensional Model in SSAS to Excel Power View Report? I am continuously getting this error message when open with Power View Report.
"Sorry, something went wrong while loading the model for the item or data source 'PC01-4300095 Sales Cube'. Verify that the connection information is correct and that you have permissions to access the data source."
View 9 Replies
View Related
May 21, 2015
how can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
View 3 Replies
View Related
Sep 21, 2015
I have created SSAS package successfully.
When I try to connect from excel , to SSAS Getting error message like
A Connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond.
If I connect to SSIS , I'm able to connect correctly.
Why I'm getting this error and how to overcome this?
View 4 Replies
View Related
Sep 2, 2015
I've see twice this year two different companies either already or planning on having ssas and ssrs running on the same server.
View 7 Replies
View Related
Aug 7, 2015
I am doing workload analysis on SSAS - Tabular (2012), I have perfmon logs captured and want to run through PAL. I am looking out for threshold file for SSAS tabular 2012/2014.
View 2 Replies
View Related
Jul 1, 2015
I have a Calculated Member in SSAS that I need to adjust based what the current member is.
The code is below
CASE WHEN [Measures].[End LIS] = 0 AND "HELP" THEN
CASE WHEN [Measures].[Beginning LIS] = 0 OR [Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS] = 0 THEN NULL ELSE
ROUND([Measures].[Disconnects]/(([Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS])/2) * 100 ,2) END
ELSE ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2)
END
In English - i need this to translate to - of End LIS is 0 "AND the current member is the current month and current year" THEN carry on
Else ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2).
I came up with
CASE WHEN [Measures].[End LIS] = 0
AND [Dim Date].[FSCL_YM].[Month Nm].currentmember.membervalue = Format(now(), "yyyy")+"]&["+Format(now(), "M")
THEN
CASE WHEN [Measures].[Beginning LIS] = 0 OR [Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS] = 0 THEN NULL ELSE
ROUND([Measures].[Disconnects]/(([Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS])/2) * 100 ,2) END
ELSE ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2)
END
But to no avail.
View 4 Replies
View Related
May 7, 2015
I have cubes which are large and query response time exceeds 1 minute.
So, I like advice of pre-warming cache. Any way to see if cache is already/still available for the cube?
non related - if there is some setting timeout for SSAS cache?
View 3 Replies
View Related
Jul 6, 2015
I have two ssas databases with same number of cube in them. Cube names are also same. I want to merge/combine these two as one so that my reporting application may see a single database having measures/dimensions from both databases.Is it possible?I am doing this to achieve loose coupling between base and regional development work. if above is not possible, any way to achieve minimum dependency between a base and a regional project.
View 3 Replies
View Related
Jun 2, 2015
I am using multiple IIF statements in ssas, it does not produce any output, does not shows any error, simply it processing..
View 3 Replies
View Related
Oct 21, 2015
I am facing issue with partition processing. I am having a SSAS cube which is having 5 partitions. These partitions are processed through a sql server job using SSIS packages. In packages I used SSAS process task to do this.Now problem is, job is running successfully and showing that the step which is having partition process also fine.But data is not updating in the partition. While checking the partition properties, it is not updated with recent date and time.
When I try to manually process the partition, it is getting succeeded and recent data is getting reflected with recent date and time.Package configuration is done in job itself.
View 4 Replies
View Related
Apr 30, 2015
I got this error from a sql agent driven cube process yesterday and am wondering where the log of errors is created...
Executed as user: xservername$. <return xmlns="urn:schemas-microsoft-com:xml-analysis"><results xmlns="<root">http://schemas.microsoft.com/analysisservices/2003/xmla-multipleresults"><root
xmlns="urn:schemas-microsoft-com:xml-analysis:empty"><Messages xmlns="urn:schemas-microsoft-com:xml-analysis:exception"><Warning WarningCode="1092354050" Description="Server: Operation completed with 1042 problems
logged." Source="Microsoft SQL Server 2008 R2 Analysis Services" HelpFile="" /></Messages></root></results></return>.
The step failed.if its a property I can see related to the server in ssms, which property as I see lots of stuff with the word log in the property name.
View 11 Replies
View Related
Dec 13, 2010
Is it possible to have more than one cube under one SSAS database? For example I have a database "Test" and in this the cube exist is "TestCube", is iit possible to deploy another cube "TestCube2" under the Test databse?
If yes then what is the process to do that, the reason I am asing is there are some common dimensions used n both the cubes and I am not sure what is the best way so that I can use the shared dimension?
View 6 Replies
View Related
Sep 17, 2015
I've been working with SSAS for a good few years now but I keep bumping into this problem - my users are trying to build a measure that is based on a calculated attribute and finding it difficult to work out how to write the MDX to do so. Intuitively, they thought a Calculated Member would work, but I don't think a Calculated Member is quite the same thing from my understanding.
So, here's the scenario.
We have a Product Dimension. We have a Measure that is the Number of days the Product took to make, e.g. 5 days. We also have a Product Count measure that counts the number of Products.
The user would like to write a calculated measure that works out the number of products that took <5 days, 5-10 days, 10-15 days etc.It would be easy to write a set of calculated measures for each of these bandings, but the user wants effectively a single dynamic attribute to use in the calculation in order to automatically distribute these values across the columns in their pivot table.
Is this even possible? I was thinking I could build an attribute on the Product Dimension in the ETL to do this quite easily, but the user wants to be able to change the bandings on the fly by changing the MDX for the attribute, rather than go back to the developer every time.
View 4 Replies
View Related
Oct 29, 2015
how to achieve the below mentioned in SSAS: P
1 - Set Default values 20 and 80
2 -Set Default value <> 90 or except 90.
View 2 Replies
View Related
May 6, 2015
I wanted to know the meaning of Granlatiy of Fact with some example.
View 3 Replies
View Related
Sep 17, 2015
I need to find the percentile using cube so i am using the below formula :
((n-1) * p /100) -1
n= count of number of array records
p= percentile
I am using below MDX query:
WITH MEMBER [Measures].[PV] AS 25
Member [Measures].[CntCT] as Count(NonEmpty([Tb City].[City Name].&[DC], [Measures].[CPT1]))
Member [Measures].[PVInt25] as Int(((([Measures].[CntCT] - 1)* [Measures].[PV])/100) - 1)
Member [Measures].[PVC] as ([Measures].[CPT1],Order(NonEmpty([Tb City].[City Name].&[DC],[Measures].[CPT1]),
[Measures].[CPT1],ASC).Item([Measures].[PVInt25]))
Select [Measures].[PVC] on columns, {[Tb City].[City Name]} on rows from test;
The line 2:
Member [Measures].[CntCT]
In that i need to find the n count of rows where city is DC (City is my Dimension) in Measures CPT1
But currently it is giving the result 1 instead in actual in my test cube there is the city DC exists with 23 CPT1 rows count.
I tried the below query:
SELECT NON EMPTY {[Tb City 1].[City Name].[City Name].&[DC] }
ON COLUMNS, NON EMPTY { ( [Measures].[Tb Main Count] ) }
ON ROWS FROM [test]
Above query gives me the correct count i.e. 23 but i need to get the result of above query in line 2 of MDX query:
Member [Measures].[CntCT]
View 4 Replies
View Related
Jul 23, 2015
I have a requirement where I need to show the maximum value in grand totals but for the dimension members the same measure has to sum.
For ex: lets say I have a measure called Test and this is a base measure. The aggregation type set to this is SUM.
For this same measure the grand totals should not show the sum instead it should show the maximum value of the dimension members which is being analyzed across.
View 4 Replies
View Related
Aug 7, 2015
I want to implement population data in sales cube.
Fact table has customer code which is foreign key of Customer master dimension which in turn is linked to census data dimension. Census data dimension have city wise population data having foreign keys of zone and state.
We want to add population data in fact table.
View 3 Replies
View Related
Jan 18, 2011
I was trying to update an SSAS database on a test server and got the following error when trying to deploy from Visual Stuido. I get a similar error in SMS. I tried to delete the database before deploying but I get an error when trying to delete. I rebooted the server.
(SQL Server 2005 R2, Windows Server 2008R2.)
Error 1 File system error: The following file is corrupted: Physical file:
?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.0.dim5.Dim Age.Dim Age.dstore. Logical file . Errors in the metadata manager. An error occurred when loading the Age dimension, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.5.dim.xml'. Errors in the metadata manager. An error occurred when loading the Heidtman DW cube, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbHeidtman DW.7.cub.xml'. 0 0
View 3 Replies
View Related
Dec 1, 2015
I need to limit the sessions to access to SSAS cube to one per user. For example, if a customer uses Excel to check a cube, two or more users cannot use the same session or account.
View 2 Replies
View Related
Sep 10, 2015
how to move the dimension attributes from currency to geography and vice versa(i.e need to change their positions) in SQL Server 2012. i need currency to be placed in top of geography or geography below currency.
View 6 Replies
View Related
Jun 3, 2015
In Analysis services,i have multiple DB's. i need to delete all using XMLA script.
View 3 Replies
View Related
Oct 25, 2010
I have a .abf file, which I am attempting to restore. I go to Management Studio and attempt to restore the cube.
However, whenever I attempt to restore the following error message occurs:
"File 'C:/.......' specified in restore command is damaged or is not an AS backup file.
The following error occured:
Access is denied (Microsoft SQL Server 2008 R2 Analysis Services)
View 4 Replies
View Related
Jun 21, 2013
How can i deploy an existing cube with a new name on the same server?
View 4 Replies
View Related
May 21, 2015
I am thinking of a possible design where the cube will never go offline.
Usually when I do some code changes on my cube the cube goes offline and I need to Full Process it again to get it back .
However , in cases where the cube is extremely critical for the business users , it would be great if I can deliver a solution where the cube never goes down.
View 4 Replies
View Related
Sep 27, 2013
I'm trying to do a currency conversion with an MDX statement in my Cube SSAS 2012.
Here is my script :
SCOPE( LEAVES([Entity]) );
SCOPE( LEAVES([Time]) );
SCOPE( LEAVES([Currency]));
SCOPE( [Account].[Account].[Total ACCOUNT].members)
THIS = ([Measures].[Value],[Currency].[Currency].[Local])*([Measures].[Value],[Account].[Account].[Fx Rate]);
END SCOPE;
END SCOPE;
END SCOPE;
END SCOPE;
The problem is I want to exclude frome the scope Currency my local Currency in order to make the conversion only if a currency (€,$, £) is selected. I tried the following syntax but it always return a "MDX script is not valid" :
SCOPE( LEAVES([Currency], Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except ([Currency].[Currency].members,[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( LEAVES([Currency] - [Currency].[Currency].[Local]);
View 5 Replies
View Related
Jun 12, 2015
How can I connect ssas cube to server. I have no SSAS SERVER INSTANCE...
View 3 Replies
View Related
May 27, 2015
I have a requirement to show the parent value which is passed and also all the leaf member details in MDX. For example in Adventure works, if I pass Bikes as the value in MDX, the results should display Bikes along with All the child member names as a measure value in SSAS MDX. I only have one hierarchy with Product Category-> Subcategory-> Product.
I am trying to use the following MDX but I am getting all the members. I need to get only Bikes in my report.
WITH MEMBER [Prod_Passed] AS SETTOSTR(AXIS(1))
MEMBER [Prod_Child] AS DESCENDANTS ([Dim Product].[Hierarchy].CURRENTMEMBER,,LEAVES).item(0).NAME
MEMBER [Child_Value] AS ([Dim Product].[Hierarchy].CURRENTMEMBER,[Measures].[Sales Amount])
SELECT [Dim Product].[Hierarchy].[Product Category].&[1] * [Dim Product].[Product Key].[Product Key].MEMBERS ON ROWS,
{[Measures].[Sales Amount],[Prod_Passed],[Prod_Child],[Child_Value]} ON COLUMNS FROM
[AdvWorks]
View 10 Replies
View Related
