I have sales data in SSAS cube and mapping data in RDBMS table. I want to apply join to get result into SSRS report.
Here we should get data of yesterday from time dimension of cube.
Time is in [Time].[FiscalYearHierarchy].[Fiscal Day].&[2015-05-28T00:00:00] format.
How @StartDate and @EndDate parameters must added to the MDX query for usage in SSRS data set. strtomember can be used like
SELECT (
strtomember(@StartDate) : strtomember(@EndDate)
) ON COLUMNS FROM [Cube]
How can i specify that sub-select must work on the [Fact A] and [Fact B] rundate? strtomember(@StartDate) does not specify on which attribute this sub select is going to work. Any pointers ?
FROM
(
SELECT
(
[Fact B].[Rundate].&[2015-01-02T00:00:00] : [Fact B].[Rundate].&[2015-01-15T00:00:00]
) ON COLUMNS FROM
(
SELECT
( [Fact A].[Rundate].&[2015-01-02T00:00:00] : [Fact B].[Rundate].&[2015-01-15T00:00:00] ) ON COLUMNS FROM [Cube]
)
)
Required Output
Country Category
Internet Sales Amount
Internet Order Count
[code]....
I need to perform a SQL kind of Cross join to get the Total Count as a column along side as there are .net code and json structures defined that expects output in a certain format.
We have SSRS reports (pointing to SQL 2012) containing cascading parameters that we have deployed on SharePoint 2013 and once a user makes a selection to the parent parameter, child parameters are getting refreshed based on the selection in the parent parameter and then we see this:
Once we hit Apply, the Loading image comes up and approximately10 seconds later, The whole webpage gets refreshed and the parameter selections get reset to default parameters.Â
This is getting frustrating because there are about 10 parameters in the report and once a user makes selections and hit apply if the page gets reset, the user has to make all the selections again.
We are working with Microsoft support on this who suggested us to increase the timeout setting of DistributedCache service on all our SharePoint servers which did seem to work initially but I do see this issue happening occasionally.
I have the below data. I need to produce a report that shows customer and total sales who had the max sales by year.
Order ID Cust ID Year Sales
O1 C1 2000 100
O2 C1 2000 150
O1 C2 2000 50
O1 C1 2001 150
O2 C3 2001 200
Report:
Cust ID Year Sales
C1 2000 250
C3 2001 200
Hi,
For the Data Driven Subscription in SSRS we are using the following stored procedure
In Step 3 - Create a data-driven subscription
create procedure spRSGetReportSettings
(
@ReportID as integer
) as
begin
set nocount on
declare @t as table(y int not null primary key)
declare
@cols as nvarchar(max),
@y as int,
@sql as nvarchar(max)
set @cols=stuff(
(select N',' + quotename(y) as [text()]
from (select ParameterName as y from Reportsettings where reportid=1) as Y
order by y
For XML Path('')),1,1,N'');
set @sql=N'select * from
(select reportid,parametername, parametervalue from ReportSettings where reportid= ' + Cast(@ReportID as varchar(5)) +' ) as D
pivot(min(parametervalue) for parametername in(' + @cols +N')) as p'
exec sp_executesql @sql
end
Basically the idea is to maintain a single report parameter setting table for multiple reports.
Structure of the table is as given below
ReportID, ParameterName, ParameterValue.
Using Pivot we can generate the ParameterName/ParameterValue combinations for each report. This stored procedure is working fine in query editors(Management Studio)
But, in SSRS it is giving any results.
In Step 4 - Create a data-driven subscription,
Get the value from the database drop down, I am not getting any database columns.
Please help.
Kumar
Hi all,
Hopefully someone can point me in the correct direction as to how best to implement this.
I'm looking to build a report in analysis services which connects to an analysis cube. Its a simple report showing a session count value by procedure type. What i'd like to do however is to show only data for the last 3 months.
I assume that i select the measure group i want to show (in this case {Session Count}) and then the relevant dimensions ({Procedure}, {Site}, {Session Date.Calander}) I've set up a Matrix on the report itself and added the measure group and Procedure dimension. I want to be able to choose the {Site} as a parameter. The problem i am having is how to show only the data from the last 3 months, either from the current date or from a date specified as a parameter.
I hope this makes sense. Any help people can give will be most appreciated.
Cheers,
Grant
Hi!
I have several problems of my coding, please give me some advice.
1. How to let result data place at temptable temperary for other mapping? should i create temptable first ?
2. When I got the duplicated record result, I require to map with the main tables (tblROrder & tblSOrder)to find out the record reference no. Please advice how to handle this issue with reference no. at the outcome.
Many thanks,
New Learner
***Coding as following
SELECT code, SMSNo, holderNo, count(*) From tblROrder
WHERE Day = @Day
GROUP BY code, SMSNo, SholderNo
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpOne (code, SMSNo, holderNo) <====error found
SELECT code, SMSNo, holderNo, GrossAmt, count(*) From tblSOrder
WHERE Day = @prmDay between D1 AND D14
GROUP BY code, SMSNo, holderNo, GrossAmt
HAVING COUNT(*) > 1<=====result will be found, but since i didn't get the RefNo at the listing, please advise how to let the outcome with RefNo
INTO #tmpTwo (code, SMSNo, holderNo) <====error found
Hi I need to map the unstructured report to my Sql server data source,Is there any method to achieve this in ASP.Net or is there any good tool available in the market which support ASP.Net2.0 with SQL server 2005.My requirement is to load/parse the existing data into my application which in various formats for each cleintsPlease help me on this
View 2 Replies View RelatedI have report which has 5 columns. User want to export report file in Excel format. when  exported report then by default 2 columns will be hidden in excel and user can unhide columns after export in excel.I did column hide on report level and show in result set in excel sheet by using Global render format.Â
View 4 Replies View RelatedLooking for sql query for this requirement output and default get the current day and time as day 7 with count start of 7 day before. Today is Sun. Thus start day is last sun.
now the time is 22:00 & group by shop plus underline +24 hour format
Sun Mon Tue Wed Thur Fri Sat Sun Total
Shop A 20:00-21:00 $2 $10 $15 $5 $2 $10 $0 $100 $xxx
Shop A 21:00-22:00 $1 $10 $15 $5 $2 $10 $0 $100 $xxx
Shop A 22:00-23:00 $1 $10 $15 $5 $2 $10 $0 $no sales $xxx
Total $4 $20 $30 $10 $4 $20 $0 $200 $xxx
-------------------------------------------------------------------
Shop Z 22:00-23:00 $20 $15 $5 $2 $10 $0 $no sales $xxx
Shop Z 23:00-00:00 $10 $15 $5 $2 $10 $0 $no sales $xxx
Total $30 $30 $10 $4 $20 $0 $no sales $xxx
I'm trying to make a parameter in SSRS that defaults to most recent date with sales. Below gives me all dates with sales. How can I get the results to give me just the most recent? I've tried MAX and LastChild in a couple different ways but no luck.Â
WITH
MEMBER [Measures].[ParameterCaption] AS [Time].[Date].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [Time].[Date].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS [Time].[Date].CURRENTMEMBER.LEVEL.ORDINAL
SELECT
[Code] ....
Hi Friends,
I have a small problem in parameter mapping for Execute SQL Task.
I am using a delete statement with 2 conditions.
Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider.
I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for
c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR.
i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype.
This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also,
I set the property RetainSameConnection = TRUE for oracle connection manager.
I am not able to trace this logical error.
The same is working fine in my local machine.
But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping?
What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and
inside the parameter mapping.
Any thoughts!
I have a fact table which lists the last 12 month historical sales of a product,country,month combination so the table structure is like:
<month, productID, countryID, (month-3 sales), (month-4 sales).........,(month-14 sales)>
I need to write an MDX query which will return a flag that indicates if a product has a gap of more than 2 consecutive months in terms of positive sales. So I calculate if there is a gap of 3 months. If yes, then return 1 else null. The calculation below is scoped at product level.
IIF(([month-3 sales]<=0 ANDÂ [month-4 sales]<=0 AND [month-5 sales]<=0)
OR Â ([month-4 sales]<=0 ANDÂ [month-5 sales]<=0 AND [month-6 sales]<=0)
OR ([month-5 sales]<=0 ANDÂ [month-6 sales]<=0 AND [month-7 sales]<=0)
...............
OR ([month-12 sales]<=0 ANDÂ [month-13 sales]<=0 AND [month-14 sales]<=0)),1,NULL)
Unfortunately I cannot do this calculation at relational level as a product may have a gap of more than 2 months at country level but may not have this at a higher level in geography.
optimizing this as the performance is bad and other calculated measures are dependent on this. Based on this calculation, I can write a scope which sums up all products so that I get the count of products with a gap of more than 2 months in sales.
I have also tried CASE statement and NESTED IIFs but the performance is worse than the above.
I am trying to calculate the maximum sales per store where multiple stores exist in the same region (i.e there must be doubles of that row) in order to determine the most profitable store per that region.
E.g.
Store Sales
A 500
B 200
B 100
C 400
C 800
D 100
D 200
D 700
Looking for result set like:
B 200
C 800
D 700
I have sales from 2010 to today in my cube. my question is i want to see sales amount from 2010 to 2014 if i select 2014. or if I select 201405 ( may 2014), i want to see sales from 20100101 to 20140531. same with date. basically i want to to al the sales til the date/month /year selected. how can i achieve this?
View 2 Replies View RelatedI am tying to join tables to get the result but it is not showing any data,i have shipping address column in both tables I want to show data in single column I don't know how to display.
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress ,rs.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID
inner join
ReSaleorReStock1Table rs on r1.ProductID=rs.ProductID
where r1.HazMat='No' order by ProductID
If I join two tables it is showing data
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID
where r1.HazMat='No' order by ProductID
The following query is failing when trying to apply the
MAX(field_x_order)
to the variable @max
Note the x is represented by the string variable @stri
declare @i int
declare @stri varchar(10)
declare @max int
set @i = 18
set @max = 0
while @i < 49
begin
set @i = @i + 1
set @stri = cast(@i as varchar(10))
select @max = MAX(field_ + @stri + _ORDER) FROM table_name WHERE field_ + @stri + IS NOT NULL -- error: Incorrect syntax near the keyword 'IS'.
exec ('UPDATE display_1a SET field_' + @stri + '_order = field_' + @stri + '_order ' + @max + 'WHERE field_' + @stri + ' IS NULL')
end
I have also tried:
select MAX(field_ + @stri + _ORDER) INTO @max = FROM display_1a WHERE field_ + @stri + IS NOT NULL -- error: Incorrect syntax near '@max'.
and:
select @max = ('SELECT MAX(field_' + @stri + '_ORDER) FROM display_1a WHERE field_' + @stri + ' IS NOT NULL') -- error: Conversion failed when converting the varchar value 'SELECT MAX(field_19_ORDER) FROM display_1a WHERE field_19 IS NOT NULL' to data type int.
Thanks,
Lou
Lou
We have a sales fact table that has sales by customers, products, date etc. and dimension tables such as customers, products etc.
We built a multi-dimensional cube on top of these tables. how do we support queries like "show me top 10 products by sales amount and then show customers that didn't buy these products"?
I have the SQL code for one of the select list columns as shown below in the SSRS Data set query level.
 Example : Select IsNUll(max(ET.[# Utilizations by Utilization Method]),0) as [Employee Period Total]
SQL Result Set Output :
0
0
0
The above code when run in SQL displays correctly with zeroes if NULL values are available from the Source tables.Now at the SSRS Report level design I have grouped with more than one values.Even at the expression  I have given  =Fields!Employee_YTD_Total.Value but report output displays blank In order to evaluate 0 from the SQL result set I even tried equating the values to 0 like = Iif(Fields!Employee_YTD_Total.Value = 0 ,0,Fields!Employee_YTD_Total.Value) but still the report outputs is blank.
Issue/Query : Why it displays blank and I should have this as 0 in the report output to eliminate blank as this would be not appropriate to the end users to validate. What has to be changed either at the SSRS level or at the SQL level.
I know this is an easy one, but for some reason i keep gettin the wrong results.
This displays something like this :
Question_description Visit_Activity_Id SR_Name
Vacation 5 Judy Smith
Sick 2 Judy Smith
Visit 1 Tom Mathews
Training 3 Karen Williams
But i want it to show all the SR_Name's ..like this:
Question_description Visit_Activity_Id SR_Name
Vacation 5 Judy Smith
Sick 2 Judy Smith
Visit 1 Tom Mathews
Training 3 Karen Williams
NULL null Tom Jones
NULL null Kim Jones
NULL null Jon Travis
Any help will be grately appreciated! thanks!
Code Block
ALTER PROCEDURE [dbo].[PROC_RPT_SR_DAILY_ACTIVITIES]
(@Region_Key int=null, @Daily_activity_statistics_datetime datetime )
AS
BEGIN
SELECT Customer.Name as Store_Name,
Tbl_Daily_Activity_Statistics.SR_Code,
Tbl_Daily_Activity_Statistics.Territory_Code,
Tbl_Daily_Activity_Statistics.Customer_code,
Tbl_Daily_Activity_Statistics.in_progress_time,
Tbl_Daily_Activity_Statistics.completed_time,
Tbl_Daily_Activity_Statistics.Visit_Activity_Id,
Tbl_Daily_Activity_Statistics.dial_in_datetime,
Tbl_Daily_Activity_Statistics.question_code,
tbl_Questions_to_RC_Question.RC_Question_description,
Qry_Sales_Group.SR_Name, dbo.Qry_Sales_Group.Region,
Qry_Sales_Group.Region_Key,
Tbl_Daily_Activity_Statistics.Daily_activity_statistics_datetime
FROM Tbl_Daily_Activity_Statistics
INNER JOIN tbl_Questions_to_RC_Question
ON Tbl_Daily_Activity_Statistics.question_code = tbl_Questions_to_RC_Question.question_code
INNER JOIN Qry_Sales_Group
ON Tbl_Daily_Activity_Statistics.SR_Code = Qry_Sales_Group.SalesPerson_Purchaser_Code COLLATE Latin1_General_CI_AS
LEFT OUTER JOIN customer
ON dbo.Tbl_Daily_Activity_Statistics.Customer_code = dbo.customer.customer_code
WHERE Region_key=@Region_key AND Daily_activity_statistics_datetime = @Daily_activity_statistics_datetime
The user wants to be able, using excel, to apply a filter to all measures in every measure group. I though that I can create a dimension with a single level with two members, let´s say "on" and "off" and depending on the selected member and using an IIF statement decide which formula applies to the calculated measures.
I have serious doubts about the performance and for this technique because I am thinking as a .Net developer and not as a cube developer. Maybe it is better to resolve it scoping the measures but I cannot figure it out.
hai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
Hi ALL,
I have a report that has a letter in a textbox.When I view the report all the lines are wrapped up to a single paragraph.How to apply a line break in the text box to get a formatted letter .
Thanks.
Hello
I have a report that retrieves its data from Analysis Services. The data includes a count and dollar value of projects against their current status: It looks something similar to
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
In the report I hide the detail rows. I have a fixed/known number of statuses (in this case 4) and need to show all 4 in the report. eg
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1)status2 0 $0
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
ie in this case I need to show status 2 (that doesn't exist in the data set) with zero totals.
Does anyone know if this is possible to get SSRS to display each of the status groups (in a known fixed list) and then match them to the records in the dataset.
As an alternative, if I were using SQL Server I could add rows to the dataset using a union statement. Is there similar functionality using mdx? My mdx skills are very basic.
Thanks
Stewart
How to Apply justify to textbox text in ssrs?
View 2 Replies View RelatedI need to convert a OUTER APPLY hint in my query to LEFT JOIN.How it can be done?The code which is presently is this: OUTER APPLY Additional Fields. nodes('/AdditionalFields/AdditionalField') AS AF (C)
View 4 Replies View Relatedget the data from report to create data driven SSRS Subscriptions,
write query :
Running Report:
i am trying to find a way to link an 'initial' Sale ID of a product to 'future' Sale IDs of products that will trace back to the original Sale ID.For example, if I call the original sale , 'Sale ID #123', how can i link future Sale ID's (child[ren]) and all future sales to the original Sale ID #123? Can I use a Surrogate Key or similar function?
Parent:Sale ID #123
Children:Â Sale ID # 456,
Sale ID #789,
Sale ID #.....
how I can link the original Sales ID (Parent) to Sale ID's (child[ren]) of future purchases currently existing and in the future going forward?
I have this small project, I have this report that have the total of order along with the date of the order
SELECT sf.ORDER_QNT, dd.ACTUAL_DATE, dd.MONTH_NUMBER
FROM sales_fact sf,
date_dim dd
WHERE dd.date_id = sf.date_id
AND dd.MONTH_NUMBER = 1;
ORDER_QNT ACTUAL_DATE MONTH_NUMBER
1100 05/01/13 1
100 05/01/13 1
140 06/01/13 1
110 07/01/13 1
200 08/01/13 1
500 08/01/13 1
230 08/01/13 1
500 08/01/13 1
200 08/01/13 1
53 15/01/13 1
53 22/01/13 1
Now, I want to get the average for that month (average per day).
SELECT sum(sf.ORDER_QNT)/31 as AVGPERDAY
FROM sales_fact sf,
date_dim dd
WHERE dd.date_id = sf.date_id
AND dd.MONTH_NUMBER = 1;
AVGPERDAY MONTH_NUMBER
---------- ------------
113.785714 1
but instead putting 31, I'd like to pull the totaldays from the actual_date using the Extract function so I try this
SELECT sum(sf.ORDER_QNT)/EXTRACT(DAY FROM LAST_DAY(to_date('05/01/13','dd/mm/rr'))) as AVGPERDAY,
dd.month_number
FROM sales_fact sf,
date_dim dd
WHERE dd.date_id = sf.date_id
AND dd.month_number = 1
GROUP BY dd.month_number;
AVGPERDAY MONTH_NUMBER
---------- ------------
113.785714 1
The result is nice, but now when I change the date with the dd.actual_date it gives error
SELECT sum(sf.ORDER_QNT)/EXTRACT(DAY FROM LAST_DAY(dd.actual_date)) as AVGPERDAY,
dd.month_number
FROM sales_fact sf,
date_dim dd
WHERE dd.date_id = sf.date_id
AND dd.month_number = 1
GROUP BY dd.month_number;
Error at Command Line : 1 Column : 53
Error report -
SQL Error: ORA-00979: not a GROUP BY expression
00979. 00000 - "not a GROUP BY expression"
This is a question regarding the use of an XML data source within an SSRS sub-report. This is a two server configuration consisting of SSRS 2K5 and a separate file server exposing xml files over http, IIS 5.
Is it possible, and if yes how, to configure the xml data source to use the application pool identity instead of the current caller identity? I can not turn off impersonation within SSRS. I need to revert to use the W3WC, app pool, process identity within the xml data source. I do not want to configure Kerberos delegation and the file server€™s IIS virtual directory must be set for windows security.
Hello,
I am creating a sales report that needs to display Sales statistics for a selected month grouped by Material. Also, it needs to display the same stats for the selected month of the previous year. Finally, it needs to display Year To Date Statistics for the current year and previous year up to and including the selected month.
Currently, I am using 3 queries to do this. The first one gets the statistics the current month grouped by material. The others sprocs get their corresponding information by me passing in the material number and the month and doing the appropriate sum. So, essentially, for a single line of the report, 3 queries are being done. The problem arises in that sometimes there may be as many as 300 materils displayed in a given month, which amounts to alot of db activity and a long delay loading the report.
Is there anyway to get this information in one swoop using some fancy aggregation?
Thanks,
Jake