Analysis Services Processing Task: Logging And Error Handling
Mar 5, 2007
I have an Analysis Services Processing Task in my SSIS package. I run the SSIS package using SQL Server job, the running of the package is a job step.
When I process manually the analysis services objects (in practise cubes) using dtexec utility I get a lot of log. In case the processing fails I get error messages that quite well describe the error. But when I run the job the only information I get in the job log is that the job step failed. I know the failure happens in the Analysis Services Processing Task.
Is there any way in SSIS to get a) the log of the Analysis Services processing or b) the error messages of the Analysis Services processing? Or should the processing be done some other way than I've been doing?
View 4 Replies
ADVERTISEMENT
Apr 1, 2008
All,
I 'm using 'Analysis Services Processing Task' as part of a SSIS package to refresh the cube. in the property page,
the 'loggingMode' is set 'enabled', but there is no records in the sysdtslog90 table while all other tasks are logged in the table. How to logging into the sysdtslog90 table?
Thanks in advance
Jessie
View 3 Replies
View Related
Jul 11, 2007
We have an Integration services package that executes a few TSQL tasks, then processes an Analsys Services database. This has been in production for about three weeks now and twice the package has failed with this error from the event log:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 3
Date: 7/11/2007
Time: 1:48:59 AM
User: N/A
Computer:
Description:
OLE DB error: OLE DB or ODBC error: An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.; 08001;
Communication link failure; 08S01;
TCP Provider: An existing connection was forcibly closed by the remote host.
; 08S01.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I don't think that this error is accurate because the package and Analysis Services are on the same server.
Also, this does not happen in our development environment. Any help is appreciated.
Thanks,
Brian
View 1 Replies
View Related
May 13, 2014
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
View 2 Replies
View Related
Apr 9, 2008
Hi. I have an Analaysis Services (2005) cube with four dimensions and one fact table (with three partitions - 2006,2007,2008) for which I need to create an SSIS package to process. I only want to process one of the three partitions (2008) - the previous two years should remain unchanged.
This is what I have currently in the Analysis Services Processing Task under Processing configuration:
- An object for each of the dimensions with "Process Full."
- An object for the 2008 partition with "Process Full."
(Note - Under Process Options, I see only Process Default, Process Full, Unprocess, and Process Data for dimensions and partitions).
Batch settings are:
- Processing order: Sequential
- Transaction mode: All in one transaction
- Dimension errors: Ignore errors
- Process affected objects: Do not process
When I execute the package, the cube loses the 2006 and 2007 data.
I am assuming that I have an issue with the Process Option or the Batch Settings, and I would appreciate any guidance!
Thanks,
Marianne
View 6 Replies
View Related
Mar 11, 2008
Hi all, here is my problem:
The last node of my workflow in SSIS is an analysis Services Processing Task, which is supposed to fully reprocess a cube, defined in a different project.
In the configuration, I found the correct cube and setups for it, I thought I wasn't gonna have any problems with it, but it started to complain about user and password information. I thought since the databases configured itself when I added them, the same thing would happen with this Task.
I do have my own user and pass which has permissions to reprocess the cube, although I thought windows authentication would be better then setting up a user and password for the application/task.
I looked in the entire configuration pane and found no information regarding username and password.
Where should I set it up, my SSIS solution or the Cube's solution?
This might be a newbie question, I'm not quite sure...
EDIT: Here is the error message:
[Analysis Services Execute DDL Task] Error: The following system error occurred: Logon failure: unknown user name or bad password. .
View 5 Replies
View Related
Feb 21, 2008
Hello
I am trying to run Olap Cube 2000 inside SSIS project.
I am using "Analysis Services Processing Task" Object.
The Visual Studio Project is sitting on the machine where the
analysis 2000 is running but yet i get an error while establish
a connection to the Analysis server.
On that machine also install MICROSOFT SQL SERVER 2005 .
the error is:
A Connection Cannot be made . Ensure that the server is running.
Does Anybody have an idea to why i get this Error.
Thanks,
View 1 Replies
View Related
Nov 1, 2007
I have an olap database "A" and SSIS package "P" which process all the dimensions and cubes in "A" olap database.
I created "A1" olap database copy of "A" and made copy of "P" SSIS package as "P1"
I opened "P1" SSIS package and updated olap connection properties "Initial Catalog = A1". A1 is my new olap database.
When I run package "P1" guess what? it processed "A" olap database's cubes and dimensions. Try it, not in production because I did it in production.
View 12 Replies
View Related
Oct 19, 2007
We have set up an IS package to process an AS 2005 database (comprising cube & dimensions, etc) daily, via a SQL Server Agent job on both development and production systems. This has been working fine for months.
A new dimension was added to the cube on the development system - automatic processing via the IS package continued without issue. However, when the new dimension was added to the production system the IS package no longer processes the cube correctly. Although all appears ok (and all is present and correct in the logs), no data updates to the cube are made. Only when the cube is manually processed does the cube get updated.
Anyone got any ideas about how to get around this issue? We have created a new IS package, with a single Analysis Services Processing Task, and tried this but get the same outcome.
View 4 Replies
View Related
May 14, 2008
I am trying to execute an SSIS package from a client that contains an Analysis Services Processing Task in the package. The client that does not have SSIS and SSAS installed. We are getting an error
The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It requires a higher level edition. The same package runs from a server that has both SSIS and SSAS installed. Let me know if someone has come across the same problem.
Thanks
View 1 Replies
View Related
May 2, 2008
We find that if we deploy the OLAP database with a different name on the test server, then regardless of how we change the connection string provided to the SSIS package that processes the cube, then the package fails to connect to the database. To clarify:
In development the OLAP database is called MyOlapDB and the source database is called MySqlDB. Both are on the same machine. When the the application is built and released for test, the test team install the databases on a replica of the production environment (i.e. web app on one machine, OLAP DB on another and SQL database on yet another). They also, quite rightly, implement the new test databases so they incorporate the build version number. So, MyOlapDB123 and MySqlDB123 are both from build 123.
This is when the problems start. Regardless of how the connection string is specified in the job that processes the cube, the SSIS integration package fails with the error:
[Analysis Services Execute DDL Task] Error: Errors in the metadata manager. Either the database with the ID of 'MyOlapDB' does not exist in the server with the ID of 'OurTestServer', or the user does not have permissions to access the object.
We have tried config files and job properties, but neither work. Also, simply attempting to run the package using the DTEXECUI does not work either.
Looking inside the XML of the package, we clearly see the ConnectionManager object which has the original connection string, which is
Data Source=localhost;Initial Catalog=MyOlapDB;Provider=MSOLAP.3;Integrated Security=SSPI;Impersonation Level=Impersonate;
However, editing the initial catalog here still does not solve the problem. Searching the XML for the string MyOlapDB reveals the OLAP database name in two other places - both within the object data of the two Analysis Services Execute DDL tasks.
Anyone know how to solve this problem without having to hack the XML of the package?
View 4 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
Jan 9, 2004
Hi,
I am processing one cube using Full Process option and it's giving
following error.
Analysis Server Error: Internal error [Object does not exist] '11948' ;
Time:1/8/2004 6:11:11 PM
Error(-2147221421): Internal error (Internal error [Object does not
exist] '11948' ); Time:1/8/2004 6:11:11 PM
Can anyone help me on this.
View 1 Replies
View Related
Apr 8, 2008
Hi There,
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet
Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
Thanks
Vivek
View 5 Replies
View Related
Apr 27, 2001
Hello SQL World,
I have created a DTS package which should process an Incremental Update OLAP Cube ... however it is generating the following error message ... HELP has anyone seen this before ?
Error: -2147221499 (80040005); Provider Error: 0 (0)
Error string: Provider generated code execution exception: EXCEPTION_ACCESS_VIOLATION
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts.hlp
Help context: 700
TIA,
Paul
View 1 Replies
View Related
Mar 7, 2008
Hi there,
i have got a SSIS Package, that contains a sequence container with transactionoption "required". Within this sequence I placed different AS processing tasks and different SQL tasks. The transactionoptions of these tasks are set to supported.
My problem: in the case a SQL task fails on execution, all executed tasks are rolled back except the AS processing tasks. The expected and necessary behavior should be, that also the AS processing tasks get rolled back.
Has anyone got a solution or a workaround for this problem?
Thanks.
Andi
View 3 Replies
View Related
Oct 11, 2007
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
View 2 Replies
View Related
May 30, 2008
Hi everybody,
I'm fairly new to the SSAS/SSIS world (though not new on databases, etc.) and I'm having some problems with the SSIS packages in our Cube environment.
Currently in our SSAS/SSIS project, we have two major connection managers, one to the database we use for loading the Cube, and the other connector for the cube itself. To load the data from the database to the cube, we wrote some SSIS packages and used the Analysis Service Processing tasks to process all the dimensions and measures. This works pretty good, so no problems here.
The real problem starts, when I try to change the connection parameters, e.g. because the server changed, or the database has been renamed.
As soon as the connection managers points to another (existing) cube, regardless if the structure is exactly the same as the one of the old cube, the tasks lose all the assigned objects from their lists. It is really annoying to add all these exactly same objects to the task again. I tried experimenting with the DelayValidation attribute so the Development Studio doesn't destroy my work every time, but when I deploy the package the Cube breaks. Obviously some kind of deeper connection is destroyed when I change the connection string.
Is there a way to prevent the package from breaking/losing objects, without me having to sacrifice 15 minutes every time I change the connection parameters?
Regards,
Tris
View 4 Replies
View Related
Mar 14, 2013
I'm getting this error during processing one dimension.OLE DB error: OLE DB or ODBC error: SQL Server blocked access to STATEMENT 'OpenRowset/ OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online.; 42000.my dimension contains member from two datasource table.
and in another dimension i get error;Errors in the high-level relational engine. The 'dbo_vicidial_Users' table that is required for a join cannot be reached based on the relationships in the data source view.Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Staging User', Name of 'DimUsers' was being processed.
View 4 Replies
View Related
May 24, 2002
Hi Guys.
For SQL 2000 is there any addin available for DTS task?
If not how can i automate it?
Advance thanks
-MAK
View 1 Replies
View Related
Nov 4, 2015
I get the following error while processing a SSAS tabular model (2014) on a new server.The SSAS service on this server is running under a login which has access to the SQL server data sources. I tried changing the provider to OLEDB from SQLCLNI11 in the connection string but that doesn't work too. The error message isn't useful to debug further.
The cube processing succeeds on a different server. I scripted out the cube DB and ran it on the new server and am trying to process full but it fails with the following error.
Error Message:
The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
More Details:
OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
For more information see SQL Server Books Online.; 08001; SSL Provider: No credentials are available in the security package
; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001.
A connection could not be made to the data source with the DataSourceID of 'd7a37dae-be87-44e0-a8b2-498069af82c9', Name of 'connection name'.
An error occurred while processing the partition 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c' in table 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c'.
The current operation was cancelled because another operation in the transaction failed. The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
View 3 Replies
View Related
Jul 5, 2007
Hi,
In terms of data flow tasks, when say we load text files into databases.
Is it possible to have it in a way so that if a certain record (line in the text file) fails to load due to watever reason, it gets written to another table, but the rest of the records still get loaded?
I try to do so and end up with the whole data flow task failing and it stalls at the record that had the error and doesn't seem to continue forward.
I just used the red arrow (on failure) and put that to another SQL destination object. But yeah that didnt work.
If someone has a better way of doing so, would be awesome if you can share that.
Cheers
View 5 Replies
View Related
Mar 14, 2008
I am using the Execute SQL Task to call a sproc which I am not in the design stream for, so I can call it but I cannot change it. I need to deal with the issue of handling an error from a call to this sproc- the stored procedure does not return any output variables nor a return value that I can nail, all I get is a failure in the task. The sproc itself is just a straightforward insert into a table which can fail for any of the obvious reasons (PK violation, bad data, null data et al). The point is I want to know which rows failed in the insert (moving data from one databases table to another one row at a time wiith the sproc being inside a loop task over a recordset variable populated via a data flow call to a SELECT statement) so that I can flag then as such so that when I am finished in my loop I am left with a bunch of rows that did not make the trip from database A to databases B - within the loop, for each row that the sproc call is successfull, will hjave another sproc follow it to delete it from the original, but I cannot get this far when my INSERT sproc call fails. I have tried changing the MaxErrorCount to a big number - ceratinly more than I need but it does not seem to matter .lCan you help me out here - or is the design flawed anyway?
View 8 Replies
View Related
Sep 21, 2006
I'm importing an Excel file and massaging it with a custom script task. I get an error "Index was outside the bounds of the array." That error is helpful but I needed to know which of the 70,000+ lines the error occurred on. What is the best way of devbugging this issue? Try-Catch-Finally with messageboxes in the Catch clause?
Barkingdog
View 1 Replies
View Related
Jun 20, 2015
Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
View 4 Replies
View Related
Mar 24, 2006
I have a main package that calls several other packages using Execute Package Tasks. I also have OnPreExecute, OnPostExecute, and OnError event handlers at the package level to audit the beginning and completion of each package. I want to prevent each task from bubbling up to the package event handlers as well as prevent each task from bubbling up to the main package event handlers. I've tried setting the Propagate variable for each of the event handlers to False and setting the DisableEventHandlers property of each task to True but neither solution seems to work. Is there a way to do this that I'm missing?
View 8 Replies
View Related
Mar 5, 2015
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
View 10 Replies
View Related
Nov 2, 2015
When my ForEach Loop runs, when a file does not exist on the server, I am getting a File does not exist error.I would prefer to write a mesaage to my log and then move on to the next step successfully.When I got to Event Handlers and select OnTaskFailed, what do I want to do from here?
View 0 Replies
View Related
Feb 12, 2008
Hi,
We currently have a SSIS package which is using a batch script . This batch script actually executes on TERADATA server and loads data in to terdata db. We did not get access to UNIX env so we are planning to create SSIS packages that can call the batch scripts and perform tasks on terdata.
Can somebody throw some light how to caputure the information if there is error in batch script or data loading and send a mail.
Ealrier we created packages that were doing data loading on SQL server and if something fails then we used error handling machanism in stored procedures which logs failure event in to SQL table and then using send mail task it send a email.
I nwant to know how to use error handling when something fails on terdata and send mail to us.
View 4 Replies
View Related
Feb 21, 2005
Hi All,
I have a problem with scheduling an Analysis Services task.
When I execute the DTS package from EM, every thing works fine.
When I schedule the package from SQL Agent, I get the following error when the job executes:
Error = -2147024770 (8007007E)
Error string: The specified module could not be found.
Error source: Microsoft Data Transformation Services (DTS) Package
I am running SQL 2K SP3a with Analysis Services 2K SP3a on WIN Server 2003 Std Edition
Any ideas or suggestions?
View 2 Replies
View Related
Apr 15, 2008
I have been trying to get an SSIS package to allow me to set as a variable the actual script for running an Analysis Services DDL, want to perform a restore of a cube. Our environment is different for the location for DEV/QA/ and Production, so when I schedule the task to run I want to have the script needed, really just the path to where the backup lives.
Can someone give a solid solution for this? I have not tried to store parameters in a SQL table, but it would seem this is something that can be done through a variable. I have created a package variable and set the value inside and it runs, but if I try to change the value when I run the package it does not set the value I want.
Under Set Values of the package when I go to run I set the following:
Package.Variables[User::RestoreScript].Properties[Value]
I get a warning saying: "Warning: Configuration from a parent variable 'RestoreScript' did not occur because there was no parent variable collection.
I also have another variable to set, but same issue.
View 3 Replies
View Related
Nov 15, 2007
I have an SSAS 2005 database "A" and SSIS package "P" which process full "A" olap database.
SSAS SERVER connection string is based on a variable read from XML configuration file.
It works well in BIDS, but when i deployed, the package failed at the step connecting SSAS, the message is "a connection cannot be made, please ensure the server is running"
In the connnecting string, i am using server name like servera.xx.com, if I change it to IP address, it works.
if I change it to Localhost(happens to be on the same server), it works.
But I need the server name solution as IP may be changed.
I installed SP2.
Any suggestion?
Thanks and regards
View 2 Replies
View Related
May 6, 2008
How to use the "Analysis Services Execute DDL Task" in SSIS to stop or start the Analysis Services.? Many thnaks.
View 5 Replies
View Related
