Analysis :: Show Only Ultimo Values In Date Dimension?
Aug 28, 2015
I've a table which contains a record for each day an employee is employed:In the cube I've create a measure which is a sum of the field "Employed" which provides me the number of employees that are employed for a given date (lowest level of my time dimensions which are YEAR-MONTH-DATE)The problem is that the number aggregating on YEAR and MONTH which provides me with wrong figures at these levels - So how can create a calculated measure (maybe with Scope) that only show the Ultimo Numbers at the lowest level when I am browsing on the Month or Year level. For example if I am on the Year level I only want it to sum on the date 31-12-xxxx and if I'm at the month level(for example July 2012) it should show me the sum of 31-07-2012 which are the last level for the given month.
View 4 Replies
ADVERTISEMENT
Sep 10, 2015
Have a need to let the user select the year and month to use for filtering results from an MDX query that populates a report.I think all I should need is a list of years and a Month name / number.What would the filter look like if say I had a Date dimension that included the year number in a 4-digit and month in a 2-digit number? In TSQL it would be something like ... where Month = @month AND Year = @year...How do I get a distinct list of member values for the month numbers from the Date dimension?
View 6 Replies
View Related
Oct 28, 2015
I am facing an issue in MDX Query. I have a custom MDX query, When I run the query I am getting results too. Now my requirement is to show the dimension names in the query result, So that I can get those header names in the cell set itself. Please see the below image.
In this image I need to show 'Fiscal Year' and 'Fiscal Quarter' in that highlighted area. Is there any custom query for this?
View 3 Replies
View Related
Jun 18, 2015
Bitmask fields! I am capturing row changes manually via a high frequency ETL task. It works effectively however i am capturing the movement of multiple fields. A simple example, for Order lines, i have a price, a discount and a date. I am capturing a 001, 010, 100 respectively for each change.
I would like my users to be able to select from a dimension which has the 3 members in it and they can select one, multiples, or all values (i.e. only want to see rows that have had the date and price changed).
Obviously if i only had 3 columns i would use bit's and be done with it, i have many different values (currently around 24 and growing).
View 2 Replies
View Related
Dec 14, 2011
I have to show 11 rows:
The first 10 rows would be the top ten values for a Measure and a Dimension that has 20 members. I can get it with the following MDX expresion:
SELECT
TopCount(EXCEPT([Dim Category].[Dim Category].AllMembers,[Dim Category].[Dim Category].[All]),10,[Measures].[Value]) ON ROWS,
[Measures].[Value] ON COLUMNS
FROM [My Cube]
View 4 Replies
View Related
Nov 18, 2015
I have a measure group product price, the measures are
1. Product Id
2. Price
3. Date
I have mapped the product id and date with product and date dimensions.I need to get the latest price of the product.For example:
Prod1, 100, 1/1/2015
Prod1, 300, 2/1/2015
Prod1, 250, 3/1/2015
Prod1, 150, 10/1/2015
So, i need the latest price. The latest price is 150.I new to MDX query. MDX query to achieve this?
View 3 Replies
View Related
Jun 4, 2015
I am in a situation to slice a fact in two date dimension .. my <g class="gr_ gr_73 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="73" id="73">sql</g> code is like this
select count(1) from fact_table where end_date >=(selecteddate on filter) and startdate <=end_date .
The common date dimension is Start date. and the filter will be only on <g class="gr_ gr_168 gr-alert gr_gramm Grammar only-ins doubleReplace replaceWithoutSep" data-gr-id="168" id="168">end</g> date.
Below is the code so far
<g class="gr_ gr_228 gr-alert gr_tiny gr_spell ContextualSpelling multiReplace" data-gr-id="228" id="228">i</g> did, but <g class="gr_ gr_229 gr-alert gr_tiny gr_spell ContextualSpelling
multiReplace" data-gr-id="229" id="229">i</g> am not finding how to filter the start date <=end_date
with member [Measures].[X] as
Sum(
{[EndDate].[YQMWD].currentmember:NULL},
([Measures].[Count]))
select [Measures].[X] on 0 ,
[EndDate].[YQMWD].year.members on 1
from Cube
What is the trick I can put so that I can filter those data where start date <=selected end date ....
View 3 Replies
View Related
May 29, 2015
Link : [URL] .....
This provides a good example for my situation. In this example, you will see a Movie dimension with four attributes; Genre, Language, Movie, and Theme. I have a similar setup except mine is Top Level Hierarchy>Categories>Values which are all under the one hierarchy.
My Question: I have the dimension setup as a multi-value parameter in one of my reports. When I filter on a value in Genre and in Language, it provides all values from that genre and all values from that language. I really only want the values that include both.
Genre - Western: Movie1, Movie2, Movie3
Language - English: Movie2, Movie4, Movie5
If I filter on Western and English, I get Movie1-5 when all I really want is Movie2 only. Is there any way to have this do an Intersect within the same dimension or do I have to build each one out into its own dimension?
View 10 Replies
View Related
Aug 11, 2010
I have a date dimension with below Hieararchy:
Year-->Quarter-->Month-->Week
Week is the lowest granular attribute.
Also i have a measure 'Holdings'
I would like to create calculated measure which should give me closing holdings at all levels(week ,Month,Quarter and year levels.) whichever i pull in the browse pane.
Below calculated measure would show the holdings for whatever the level you have specified.
([Measures].[Holdings],
ClosingPeriod( [DIM BI DATE].[Calendar].[WEEK], [DIM BI DATE].[Calendar].CurrentMember
))
But this measure shows the value for only week attribute.
for month,([Measures].[Holdings],ClosingPeriod( [DIM BI DATE].[Calendar].[Month],
[DIM BI DATE].[Calendar].CurrentMember ))
But my aim is to create a calculated measure to give closing value for any level.
View 13 Replies
View Related
Jul 7, 2015
We have a date dimension which spans till 2099 and there are future projection numbers (under measures). I want to limit the data for Future projections only to 5 years from today by default. Is there a way to do this with in the cube. I understand that this can be done using MDX but since we use excel to view the data from the cube it needs to be controlled with in the cube.
View 4 Replies
View Related
Oct 26, 2015
When i add a dimension to the cube dimension without any relation in my dimension usage to any measure group my units are going down.However when i remove the dimension from the cube am getting the correct values.
View 4 Replies
View Related
Apr 22, 2015
I create a Dimension Date using SSAS 2008 but when i execute the dimension and i go to see the result i have this result:the result is not sorted..what i need is having the result order by year i mean i have Calendrier 2020,Calendrier 2019 ...
View 6 Replies
View Related
Jun 7, 2007
We have been a Crystal shop for ages; we are currently doing a proof-of-concept for a conversion to MS Reporting Services. As such, we are developing some Analysis Services 2005 cubes to drive some new SSRS reports, which our users will access through Report Manager. Unfortunately, we are all MDX noobs here, so we are making heavy use of the Wizards until we can come up to speed.
The problem we are running into is when we develop a report with Date Parameters. When we deploy this report, the date parameter box is a dropdown box instead of a date picker. I've seen a couple of other posts on this topic, but when I try to apply the fixes mentioned in them, I throw errors.
I have two quick questions:
Why does this happen? Is it a limitation in the MDX language, in SSAS, or SSRS? Are there any planned fixes?
Can someone please show me how to fix this on my actual query string for one of our basic reports? I've highlighted the date parameters.
Code Snippet
SELECT NON EMPTY { [Measures].[Lead] } ON COLUMNS, NON EMPTY { ([Store].[Store ID].[Store ID].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@LeadSourceTypeLeadSourceType, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@StoreStoreID, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOMEMBER(@FromLeadCreationDateCalendarDate, CONSTRAINED) : STRTOMEMBER(@ToLeadCreationDateCalendarDate, CONSTRAINED) ) ON COLUMNS FROM [Referral Leads]))) WHERE ( IIF( STRTOSET(@LeadSourceTypeLeadSourceType, CONSTRAINED).Count = 1, STRTOSET(@LeadSourceTypeLeadSourceType, CONSTRAINED), [Lead Source Type].[Lead Source Type].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
I'm afraid, given my user community, that if I can't get the date picker to work properly, it could be a deal breaker.
Thanks very much in advance for your help.
Regards,
Steve
View 7 Replies
View Related
Jul 14, 2005
greetings,
if I create a dimension from fact table, then it only has members which appeared in fact table. but if I create dimension from dimension table, then it shows all members, even those with no data. how can I show only those with existing data in member list?
thank you
View 1 Replies
View Related
Jun 10, 2015
I am unable to see my DSV when I try to edit my dimension. I have added some new fields in my dimension table and now want to use them in my cube dimension.
View 5 Replies
View Related
Apr 30, 2015
Many dimensions don't have unique members. Instead, the dimension source data has duplicates at the leaf level: it's left up to SSAS to aggregate up to the actual leaf level used in hierarchies.
Every cube I've worked on in the past, a dimension is clearly defined in the source data, with uniqueness already present there: we don't make a dimension out of duplicated, sort of facty data. This kind of design seems as weird to me as an unnormalised SQL database.
Here's an example to illustrate what I mean; I'll use that Adventureworks database.
We have a Geography dimension with a Geography hierarchy. Levels go like this from top to bottom:
Country
State-Province
City
Postcode
The Geography dimension has a key attribute called Geography Key. It's there in the cube design as a dimension attribute, but it's not in any of the hierarchies, so I can't query it in MDX. But that's fine: it has the same cardinality as the lowest level (Postal Code), because the dimension has some kind of normal design.
In the cube I'm dealing with, it's all messed up. Using the AdventureWorks example above as a parallel, someone made a Geography dimension with source data keyed on [PostalCode, ExactAddress], but only wanted the dimension granularity to be PostalCode.
This makes it very hard to debug why the data in this dimension is incorrect. I can't match up the dimension members in the cube to the source data, because the dimension doesn't actually go down to the real leaf level!
So I have a dimension attribute called ExactAddressKey, but I can't query on it in MDX, because it's not part of any dimension hierarchy. Unfortunately changing any part of this cube design is not possible, so I can't even experiment with settings and see what happens.
How I could get to the leaf level of the data imported? Something like
Geography.Geography.TheInvisibleLeafLevel.Members.Properties('Key')
Or does this kind of dimension design result in SSAS discarding all the data that's more granular than the most granular attribute defined in any hierarchy - so that the data actually isn't there to be queried?
View 2 Replies
View Related
Dec 24, 2002
Trying to create a time dimension off of a large table. When I go with the default "start year at Jan. 1", everything goes fine. When I switch that to July 1, however, (drat those fiscal years, anyway), the construction of the dimension times out. Any suggestions?
View 5 Replies
View Related
Apr 16, 2004
I have a database with millions of users with email addresses. I want to create an email domain dimension that groups domains into all the big email domains (hotmail, aol, yahoo) and an "other" consisting of all the other domains. I can create a table with entries for the big domains, and get the grouping working but anything that is not a big domain will get thrown out rather than put into an "other" category.
Any idea how to get such an "other" category?
View 1 Replies
View Related
Aug 19, 2015
I am trying to define the security based on Current Member.
Can i put following statement in the DimensionData - Allowed Members Set
EXISTS([Dim M].[Emp No].MEMBERS, [Security EMP].[Role].CurrentMember, "Uvw Security Emp ")
So that the list of EMP Nos that are visible changes when a different Role is selected (Filtered).
If not then is there any other way of achieving the same? What I want is that the list of EMP No that are visible should change when the user filters it using "Role" attribute in the "Uvw Security Emp" dimension.
If I add the Role attribute in the Dim M Dimension I think it will unnecessarily calculate aggregations, etc.
View 2 Replies
View Related
Jun 15, 2015
If I have a dimension with 3 records like this:
BrokerDimId BrokerNm
1 Broker1
2 Broker2
3 Broker3
And I have a fact table that has 2 rows that join back to the first 2 dimension rows like this:
BrokerDimId Amt
1 $100
2 $200
I want to create the mdx so that I get all of the dimension rows, even if there is no record in the fact table for it and just default the amount to 0, like this
BrokerDimId Amt
1 $100
2 $200
3 $0
Is this possible using MDX?
View 2 Replies
View Related
Sep 1, 2015
I am getting the dropdown of the dimension folder twice, as i took printshot from client tool. In SSMS/bids also its showing this error. How to resolve it.
View 9 Replies
View Related
May 4, 2015
I'm building a cube for sales team , to test out I'm trying to process just one dimension called DimCalandar , when I try to process this dimension I get the following error ,
'Either the user abc/def, does not have access to database, or the database does not exist' ...
View 2 Replies
View Related
Sep 2, 2015
I AM GETTING THIS ERRORS, and even when i drag and drop calculated measures, it gives error as" query error" with RED mark..
View 4 Replies
View Related
Sep 8, 2015
I have 2 dimensions that pull their Facility Name from the same Location Dimension. The business users want to change Facility Name in the Material Facilities dimension to “Material Facility Name”, but keep Facilities dimension attribute the same. What is a good way to go about completing this task.
View 2 Replies
View Related
Sep 17, 2015
The Member_Key we can get by the method suggested in the post, but when we get the Member_Key, Id as Measures/members then performance is very slow.
Is there any way i can get the Member_key in a set in rows section.
Like
With SET [UniqueName] AS [Geography].[Country].CURRENTMEMBER.UNIQUENAME
Select Measures.Value on Columns,
UniqueName on Rows
From Cube
I want the value as just like
Value
Employees, UniqueName
View 2 Replies
View Related
Mar 14, 2013
I'm getting this error during processing one dimension.OLE DB error: OLE DB or ODBC error: SQL Server blocked access to STATEMENT 'OpenRowset/ OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online.; 42000.my dimension contains member from two datasource table.
and in another dimension i get error;Errors in the high-level relational engine. The 'dbo_vicidial_Users' table that is required for a join cannot be reached based on the relationships in the data source view.Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Staging User', Name of 'DimUsers' was being processed.
View 4 Replies
View Related
Oct 8, 2015
Need to resolve this calculation, which I would believe is something very common on SSAS environments.
Like many companies, my company has different ways of calculating Sales and the two I want to focus are Sales Gross and Sales Net.
At a high level, we calculate Sales Gross as Sales with returns, and Sales Net as Sales without returns.
We have an attribute called Order Type that has various types of orders a user can execute with my company. One of them is Returns. If you return something back to us, we record that as a return line on the sales table. With that, we can calculate that return, breaking data down by Order Type, such as:
Order Type Line Total
Mail Orders $ 776,655.44
Internet Orders $ 2,211,334.00
Call Center Orders $ 11,223,344.00
Credit Orders $ (55,666.00)
Today, to calculate Sales Gross and Sales Net, we are creating two dimensions: DimSalesGross and DimSalesNet.
To calculate Sales Gross, we leave the data at the natural state, not making any changes to mappings.
To calculate Sales Net, we map Credit Orders to Call Center Orders at the ETL level, getting a Net value for sales (Orders - Returns), however, I doubt this is the correct way of doing.
I would like to have a Line Total Net / Line Total Gross calculation, which would be based on the Order Type value.
Perhaps using a CASE statement in MDX? Is the above possible?
View 4 Replies
View Related
Aug 3, 2015
I have built a fact table and few dimension views in Datamart with the aim of creating a Cube.
On the Fact table I have added a CASE Statement with the following threshold for Premium due amounts:
CASE WHEN....
'Due_0-1_Month'
'Due_1-2_Month'
'Due_2-3_Month'
'Due_Over_3_Months'
'Overdue_0-1_Month'
'Overdue_1-3_Month'
'Overdue_3-6_Month'
'Overdue_Over_6_Months'
...END
I then created a Dimension to link this to:
CREATE VIEW...
Select 'Due_0-1_Month' as Ageing_Threshold
union all
Select 'Due_1-2_Month'
union all
Select 'Due_2-3_Month'
[Code] ....
I was successful in processing the cube, however the problem is everytime I drag the dimension on the columns field in Pivot tables the Thresholds start to break up the other amounts that I have on display like Acquisition Costs, Tax amounts. I am only interested in showing the breakdown of Premium amount measure by the Threshold dimension.
somehow 'Hide' or 'prevent' the Threshold dimension from breaking down the other measures on the Pivot and only breakdown the amounts for Premium?
how I should structure my tables in SQL or any MDX queries to resolve this.
View 0 Replies
View Related
Aug 3, 2015
I have a calculated measure. On a particular dimension I want to hide the grand total. for remaining dimension grad totals to be visible. Like the below screen shot ....
View 4 Replies
View Related
Sep 10, 2015
how to move the dimension attributes from currency to geography and vice versa(i.e need to change their positions) in SQL Server 2012. i need currency to be placed in top of geography or geography below currency.
View 6 Replies
View Related
Aug 6, 2015
I have a cube with some dimensions (dim1,dim2,dim3).I want to add another dimension (dim4) based on dim1 but more restricted.Eg. Dim1 is a product dimension, and I will create Dim4 from a subset of Dim1 (only few and predetermined products).
I will create a view (or a named query) with the appropriate where clause, create a dimension on this view/namedQ, then add on the existant cube and link it on dimension usage. Great. But in this way in the cube I haven't all fact data but only data for the product of Dim4! (Dim1 is still present).
eg: in fact data I have a total of 100$ of sales for all the products, if I link the Dim4 then the sales amount is 40$, that is the value for the product in Dim4 not for all product (I can't set the filter for Dim1/Dim4 in excel). I haven't found any way for get the 100$.
I try with two Date dimension: the first from 01/01/2010 to 31/12/2015 and the second from 01/01/2015 to 31/12/2015. If I link both I see only data for the second period (only 2015).
it seems that the more restrictive dimension trumps.What's wrong? There are other ways to get what I want? I've tried the property "DependOnDimension" but without results.
I won't publish the attribute used in the WHERE clause on the dimension.
BIDS 2008 and SQL Server 2008R2
View 2 Replies
View Related
May 5, 2015
Best way to print Dimension Usages with Measure Group for any CUBE.
This actually facilitate business people to understand which dimensions mapped to which measure group.
View 2 Replies
View Related
Jun 4, 2015
I am unable to find solution for the problem while writing a Named Set in my cube.
I have a calculated measures which gives me difference in Sales in PERCENTAGE (%).
When I try to filter out those product codes which went a less than 5 %, I get no records.
I have also tried to filter direct values lets say - Products with sales > 100000 which is working fine.
Following is sample of my Named Set
FILTER([X].[Products Code].members, [Measures].[Diff in Sales]<5)
I believe as the values are in percentage, I am facing this issue.
View 21 Replies
View Related
