I'm getting this error during processing one dimension.OLE DB error: OLE DB or ODBC error: SQL Server blocked access to STATEMENT 'OpenRowset/ OpenDatasource' of component 'Ad Hoc Distributed Queries' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ad Hoc Distributed Queries' by using sp_configure. For more information about enabling 'Ad Hoc Distributed Queries', see "Surface Area Configuration" in SQL Server Books Online.; 42000.my dimension contains member from two datasource table.
and in another dimension i get error;Errors in the high-level relational engine. The 'dbo_vicidial_Users' table that is required for a join cannot be reached based on the relationships in the data source view.Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Staging User', Name of 'DimUsers' was being processed.
I'm facing an issue while processing OLAP. I have enabled BitLocker for dirve encryption and OLAP services uses this drive for db storage. OLAP is executing though SSIS package and I'm getting below error in Package. When debugging the script, it says Drive is encrypted using BitLocker.
My client requires TDE for all databases, for OLAP we decided to use BitLocker: [URL] ....
SQL server is installed on C Drive & D Drive is the storage location for OLAP DB. When locking D Drive, OLAP processing failed. When I tried to restart SQL Server Analysis service in Services.msc it is not starting. Service restarted only when D Drive is unlocked. Is there any way we can process OLAP even when the drive is locked?
Error message is given below:
"The following system error occurred: This drive is locked by BitLocker Drive Encryption. You must unlock this drive from Control Panel. "
When i add a dimension to the cube dimension without any relation in my dimension usage to any measure group my units are going down.However when i remove the dimension from the cube am getting the correct values.
Hi,This is probably a classic scenario with a shared dimension that weneed to use in different cubes, where all fact tables do not offer thesame level of detail. Dimension is snow-flaked.The cube that's causing me troubles was designed by marking the lowestdimension level Diabled and not Visible. This allows me to get rid ofone of the snow-flake tables (the one with the lowest level), thusallowing an INNER JOIN with the remaining table which has a level ofdetail corresponding to the fact table.When processing the cube, I get a 'member with key '[blah]' was foundin the fact table but was not found in the level '[blah]' of thedimension '[blah]'' that seems to indicate that none of my fact foreignkeys exist as primary keys in the dimension table. However if I thenattempt to query the cube, all data seems to be there.Would anybody be in a position (and willing ;-)) to share his/her ownexperience working around a similar issue?Thanks,SRL
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
We have an Integration services package that executes a few TSQL tasks, then processes an Analsys Services database. This has been in production for about three weeks now and twice the package has failed with this error from the event log:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 3
Date: 7/11/2007
Time: 1:48:59 AM
User: N/A
Computer:
Description:
OLE DB error: OLE DB or ODBC error: An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections.; 08001;
Communication link failure; 08S01;
TCP Provider: An existing connection was forcibly closed by the remote host.
; 08S01.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I don't think that this error is accurate because the package and Analysis Services are on the same server.
Also, this does not happen in our development environment. Any help is appreciated.
I get the following error while processing a SSAS tabular model (2014) on a new server.The SSAS service on this server is running under a login which has access to the SQL server data sources. I tried changing the provider to OLEDB from SQLCLNI11 in the connection string but that doesn't work too. The error message isn't useful to debug further.
The cube processing succeeds on a different server. I scripted out the cube DB and ran it on the new server and am trying to process full but it fails with the following error.
Error Message: The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
More Details: OLE DB or ODBC error: A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
For more information see SQL Server Books Online.; 08001; SSL Provider: No credentials are available in the security package
; 08001; Client unable to establish connection; 08001; Encryption not supported on the client.; 08001. A connection could not be made to the data source with the DataSourceID of 'd7a37dae-be87-44e0-a8b2-498069af82c9', Name of 'connection name'. An error occurred while processing the partition 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c' in table 'XXXX_460f3467-1a99-4dc9-aaf2-bcf3d54a5c4c'.
The current operation was cancelled because another operation in the transaction failed. The operation failed because the source database does not exist, the source table does not exist, or because you do not have access to the data source.
I have an Analysis Services Processing Task in my SSIS package. I run the SSIS package using SQL Server job, the running of the package is a job step.
When I process manually the analysis services objects (in practise cubes) using dtexec utility I get a lot of log. In case the processing fails I get error messages that quite well describe the error. But when I run the job the only information I get in the job log is that the job step failed. I know the failure happens in the Analysis Services Processing Task.
Is there any way in SSIS to get a) the log of the Analysis Services processing or b) the error messages of the Analysis Services processing? Or should the processing be done some other way than I've been doing?
I Create a measure group and two dimensions using [AdventureWorksDW2012], I try to change one dimension's storage mode with setting property proactive caching as Real-Time ROlap. There is no any warning message when deploying and processing, but error occurs when I query in sql server analysis services, see below for the error messages and the screen capture.
Error occurred retrieving child nodes: the current operation was cancelled because another operation in the transaction failed.
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
I am unable to see my DSV when I try to edit my dimension. I have added some new fields in my dimension table and now want to use them in my cube dimension.
Many dimensions don't have unique members. Instead, the dimension source data has duplicates at the leaf level: it's left up to SSAS to aggregate up to the actual leaf level used in hierarchies.
Every cube I've worked on in the past, a dimension is clearly defined in the source data, with uniqueness already present there: we don't make a dimension out of duplicated, sort of facty data. This kind of design seems as weird to me as an unnormalised SQL database.
Here's an example to illustrate what I mean; I'll use that Adventureworks database.
We have a Geography dimension with a Geography hierarchy. Levels go like this from top to bottom:
Country State-Province City Postcode
The Geography dimension has a key attribute called Geography Key. It's there in the cube design as a dimension attribute, but it's not in any of the hierarchies, so I can't query it in MDX. But that's fine: it has the same cardinality as the lowest level (Postal Code), because the dimension has some kind of normal design.
In the cube I'm dealing with, it's all messed up. Using the AdventureWorks example above as a parallel, someone made a Geography dimension with source data keyed on [PostalCode, ExactAddress], but only wanted the dimension granularity to be PostalCode.
This makes it very hard to debug why the data in this dimension is incorrect. I can't match up the dimension members in the cube to the source data, because the dimension doesn't actually go down to the real leaf level!
So I have a dimension attribute called ExactAddressKey, but I can't query on it in MDX, because it's not part of any dimension hierarchy. Unfortunately changing any part of this cube design is not possible, so I can't even experiment with settings and see what happens.
How I could get to the leaf level of the data imported? Something like
Or does this kind of dimension design result in SSAS discarding all the data that's more granular than the most granular attribute defined in any hierarchy - so that the data actually isn't there to be queried?
Trying to create a time dimension off of a large table. When I go with the default "start year at Jan. 1", everything goes fine. When I switch that to July 1, however, (drat those fiscal years, anyway), the construction of the dimension times out. Any suggestions?
I have a database with millions of users with email addresses. I want to create an email domain dimension that groups domains into all the big email domains (hotmail, aol, yahoo) and an "other" consisting of all the other domains. I can create a table with entries for the big domains, and get the grouping working but anything that is not a big domain will get thrown out rather than put into an "other" category.
So that the list of EMP Nos that are visible changes when a different Role is selected (Filtered).
If not then is there any other way of achieving the same? What I want is that the list of EMP No that are visible should change when the user filters it using "Role" attribute in the "Uvw Security Emp" dimension.
If I add the Role attribute in the Dim M Dimension I think it will unnecessarily calculate aggregations, etc.
I am in a situation to slice a fact in two date dimension .. my <g class="gr_ gr_73 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="73" id="73">sql</g> code is like this
select count(1) from fact_table where end_date >=(selecteddate on filter) and startdate <=end_date .
The common date dimension is Start date. and the filter will be only on <g class="gr_ gr_168 gr-alert gr_gramm Grammar only-ins doubleReplace replaceWithoutSep" data-gr-id="168" id="168">end</g> date.
Below is the code so far
<g class="gr_ gr_228 gr-alert gr_tiny gr_spell ContextualSpelling multiReplace" data-gr-id="228" id="228">i</g> did, but <g class="gr_ gr_229 gr-alert gr_tiny gr_spell ContextualSpelling multiReplace" data-gr-id="229" id="229">i</g> am not finding how to filter the start date <=end_date
with member [Measures].[X] as
Sum( {[EndDate].[YQMWD].currentmember:NULL}, ([Measures].[Count])) select [Measures].[X] on 0 , [EndDate].[YQMWD].year.members on 1 from Cube
What is the trick I can put so that I can filter those data where start date <=selected end date ....
And I have a fact table that has 2 rows that join back to the first 2 dimension rows like this:
BrokerDimId Amt 1 $100 2 $200
I want to create the mdx so that I get all of the dimension rows, even if there is no record in the fact table for it and just default the amount to 0, like this
I am getting the dropdown of the dimension folder twice, as i took printshot from client tool. In SSMS/bids also its showing this error. How to resolve it.
I'm building a cube for sales team , to test out I'm trying to process just one dimension called DimCalandar , when I try to process this dimension I get the following error ,
'Either the user abc/def, does not have access to database, or the database does not exist' ...
I have 2 dimensions that pull their Facility Name from the same Location Dimension. The business users want to change Facility Name in the Material Facilities dimension to “Material Facility Name”, but keep Facilities dimension attribute the same. What is a good way to go about completing this task.
Need to resolve this calculation, which I would believe is something very common on SSAS environments.
Like many companies, my company has different ways of calculating Sales and the two I want to focus are Sales Gross and Sales Net.
At a high level, we calculate Sales Gross as Sales with returns, and Sales Net as Sales without returns.
We have an attribute called Order Type that has various types of orders a user can execute with my company. One of them is Returns. If you return something back to us, we record that as a return line on the sales table. With that, we can calculate that return, breaking data down by Order Type, such as:
Order Type Line Total
Mail Orders $ 776,655.44
Internet Orders $ 2,211,334.00
Call Center Orders $ 11,223,344.00
Credit Orders $ (55,666.00)
Today, to calculate Sales Gross and Sales Net, we are creating two dimensions: DimSalesGross and DimSalesNet.
To calculate Sales Gross, we leave the data at the natural state, not making any changes to mappings.
To calculate Sales Net, we map Credit Orders to Call Center Orders at the ETL level, getting a Net value for sales (Orders - Returns), however, I doubt this is the correct way of doing.
I would like to have a Line Total Net / Line Total Gross calculation, which would be based on the Order Type value.
Perhaps using a CASE statement in MDX? Is the above possible?
Hi. I have an Analaysis Services (2005) cube with four dimensions and one fact table (with three partitions - 2006,2007,2008) for which I need to create an SSIS package to process. I only want to process one of the three partitions (2008) - the previous two years should remain unchanged.
This is what I have currently in the Analysis Services Processing Task under Processing configuration: - An object for each of the dimensions with "Process Full." - An object for the 2008 partition with "Process Full."
(Note - Under Process Options, I see only Process Default, Process Full, Unprocess, and Process Data for dimensions and partitions).
Batch settings are: - Processing order: Sequential - Transaction mode: All in one transaction - Dimension errors: Ignore errors - Process affected objects: Do not process
When I execute the package, the cube loses the 2006 and 2007 data.
I am assuming that I have an issue with the Process Option or the Batch Settings, and I would appreciate any guidance!
The last node of my workflow in SSIS is an analysis Services Processing Task, which is supposed to fully reprocess a cube, defined in a different project.
In the configuration, I found the correct cube and setups for it, I thought I wasn't gonna have any problems with it, but it started to complain about user and password information. I thought since the databases configured itself when I added them, the same thing would happen with this Task.
I do have my own user and pass which has permissions to reprocess the cube, although I thought windows authentication would be better then setting up a user and password for the application/task.
I looked in the entire configuration pane and found no information regarding username and password. Where should I set it up, my SSIS solution or the Cube's solution?
This might be a newbie question, I'm not quite sure...
EDIT: Here is the error message: [Analysis Services Execute DDL Task] Error: The following system error occurred: Logon failure: unknown user name or bad password. .
I am trying to run Olap Cube 2000 inside SSIS project. I am using "Analysis Services Processing Task" Object. The Visual Studio Project is sitting on the machine where the analysis 2000 is running but yet i get an error while establish a connection to the Analysis server.
On that machine also install MICROSOFT SQL SERVER 2005 .
the error is: A Connection Cannot be made . Ensure that the server is running.
Does Anybody have an idea to why i get this Error.
i have got a SSIS Package, that contains a sequence container with transactionoption "required". Within this sequence I placed different AS processing tasks and different SQL tasks. The transactionoptions of these tasks are set to supported.
My problem: in the case a SQL task fails on execution, all executed tasks are rolled back except the AS processing tasks. The expected and necessary behavior should be, that also the AS processing tasks get rolled back.
Has anyone got a solution or a workaround for this problem?
I am facing issue with partition processing. I am having a SSAS cube which is having 5 partitions. These partitions are processed through a sql server job using SSIS packages. In packages I used SSAS process task to do this.Now problem is, job is running successfully and showing that the step which is having partition process also fine.But data is not updating in the partition. While checking the partition properties, it is not updated with recent date and time.
When I try to manually process the partition, it is getting succeeded and recent data is getting reflected with recent date and time.Package configuration is done in job itself.
I have a calculated measure. On a particular dimension I want to hide the grand total. for remaining dimension grad totals to be visible. Like the below screen shot ....
how to move the dimension attributes from currency to geography and vice versa(i.e need to change their positions) in SQL Server 2012. i need currency to be placed in top of geography or geography below currency.