Analyzing A Query In SQL Server
Oct 31, 2006
I have to duplicate a bunch of reports that were produced by a VB6 app. Now I'm using C#, ASP.net and Crystal Reports via VS2003. Each executes a stored procedure in SQL Server (before and now).
For each report I have a Stored Procedure and a View. The View's SQL code is identical to the Stored Procedure except that the two input parameters (startDate and endDate) are removed because Views don't allow parameters.
Some of the reports work perfectly right off the bat. But others are timing out. My initial test of the timing out is to just display the View. If it fails then I know that the the report engine will fail too.
So now I'm trying out the SQL Query Analyzer tool to execute the code in one of the Views. It's now at 29 minutes and still going - at least it hasn't timed out!
My question is this: Is there a way I could examine what's going on with the query to see why it's taking so long?
Robert Werner
View 4 Replies
ADVERTISEMENT
May 15, 2004
Hi knights,
Pls tell me how to analyzing the db log. I'd appreciate your help!
View 2 Replies
View Related
Feb 14, 2005
Well my question is how do i analyze db growth per day. is there a tool i can use or a method. I mean i do take a look at the task view and the files but per day it doesnt move in MB wich is weird since this is a warehouse and their are nightly loads to it inserting maybe 30000 record a night on avg.
Any help would be grately aprreciated.
View 3 Replies
View Related
Apr 6, 2004
Has anyone written routines to analyze sysjobhistory? I'm looking for a tool/routine to analyze jobs for failures, trends (such as constantly increasing run times) and other information. It's not as straighforward as I had originally hoped it would be.
I am specifically prohibited from using any 3rd-party tools (too expensive per mgmt).
I would be grateful for any input/insight.
Regards,
hmscott
View 2 Replies
View Related
Mar 26, 2007
Hi All,
I am going over the output of a Profiler trace and I've found that the duration for many occurrences of EventClass 15 (Logout) is several seconds, up to a maximum of 20 seconds. That seems excessive just to complete a logout, so my question is, does the duration figure reflect only the time to complete the logout operation or does it include the total time that the connection has been active for?
Thanks in advance
Lempster
View 3 Replies
View Related
Jun 17, 2008
sql server was using a lot of the cpu so I ran a trace.
Now i see the results and there are lines with high cpu number with textdata NULL and AppicationName Internet Information Services
how can i figure out what this is?
View 7 Replies
View Related
Nov 15, 2007
Hi guys,
We have 2 databases: DataBaseSource and DatabaseDestination. We need to truncate all the data in DatabaseDestination and put all the data from DataBaseSource into DatabaseDestination.
What is the best way to do that, we have a lot of data?
And what is the best way if we also need to keep a trace of what happened in case we wanna go back and see what happened.
Also , pls, if we use DTS, is it possible that if someone wants to see what the DTS does, is it possible to read the DTS? I mean if I give a dts to sompeone, a new DBA guy in 2 years for example, how can he know what a certain DTS does? I mean does SQL 2005 put the DTS packaege scripts somewhere or is there a friendly way to know what a DTS dsoes exactly?
Also the trace to see if something went bad is important for us?
Sory if i didn t express myself well enough, and thanks a lot for your help.
Rachid.
View 7 Replies
View Related
Aug 4, 2015
For one of our SQL server 2005 Ent edition 64 bit SP4 which has transnational replication set up and used for heavy reporting, i was trying to counter out the performance of slow running queries which basically runs and get suspended and most often are seeing waiting:So i tried to analyse the wait stats and come up with below stats where ASYNC_NETWORK_IO dominated for a collection of two weeks data.
View 15 Replies
View Related
Aug 7, 2006
I am trying to setup a means to analyze our servers using SQL Server 2005 Data Mining. I will be collecting all the logs from the Event Log of each server and store them in a SQL Server database for analysis.
Has anybody done this before? Can you give some pointers? I would appreciate your assistance.
View 1 Replies
View Related
Aug 20, 2015
For one of our database we have an issue where its log file got increased rapidly last week on Fri and Sat. The database is on SQL server 2008 R2 with compatibility level at 80. Please see below log grow events :
First, we thought Index maintenance like Re-index and update stats could have been the reason, but when check the schedule that job ran on 16th using below code:
USE ABC
GO
EXEC sp_MSforeachtable @command1="print '?' DBCC DBREINDEX ('?', ' ', 80)"
GOEXEC sp_updatestatsGO
I know above is OLD fashioned, but we believe that should not be the major cause here? How can i determine what happened on 14th and 15th which cause the event to trigger and log file bumps to 80 and 70 GB both days.
View 8 Replies
View Related
Aug 5, 2014
I need to discover the actual order in which locks are acquired on a table during a query.
This with a goal of analyzing the lock order of queries against the same table to prevent deadlocks.
I'm using SQL Server 2008 R2.
From Management Studio I execute:
begin transaction
<my query>
exec sp_lock
rollback transaction
In the output I see interesting information about which locks are acquired, but:
- are this locks ordered by the time they're acquired? That is, can I be sure that lock at row n is acquired before lock at row n+1?
- if not, how can I get this information?
View 4 Replies
View Related
Dec 25, 2007
Hello,
I have successfully installed two instances SQL Server 2005 Standard Ed. 64. and integration services (for the MSSQLSERVER instance).
When I try to install SP2 x64 everything exept the Database services of the MSSQLSERVER instance was updated well.
Here is the part of the inst.summary:
Time: 12/25/2007 13:09:26.420
KB Number: KB921896
Machine: xxxxxxx
OS Version: Professional (Build 6000)
Package Language: 1031 (DEU)
Package Platform: x64
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Unterstützungsdateien für das Setup DEU 9.2.3042 x64
Datenbankdienste (AUTODESKVAULT) DEU SP2 2005.090.3042.00 x64 STANDARD
Datenbankdienste (MSSQLSERVER) DEU SP2 2005.090.3042.00 x64 STANDARD
Integration Services DEU SP2 9.00.3042.00 x64 STANDARD
SQL Server Native Client DEU 9.00.3042.00 x64
Clientkomponenten DEU SP2 9.2.3042 x64 STANDARD
SQLXML4 DEU 9.00.3042.00 x64
Abwärtskompatibilität DEU 8.05.2004 x64
Microsoft SQL Server VSS Writer DEU 9.00.3042.00 x64
----------------------------------------------------------------------------------
Product : Datenbankdienste (MSSQLSERVER)
Product Version (Previous): 3042
Product Version (Final) :
Status : Fehler
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29504
Error Description : MSP Error: 29504 SQL Server-Setupfehler beim Analysieren von SQL-Skript 'c:ProgrammeMicrosoft SQL ServerMSSQL.1MSSQLInstallsysdbupg.sql'. Fehlercode: Zugriff verweigert
. Beheben Sie das Problem, und führen Sie dann das SQL Server-Setup erneut aus, um den Vorgang fortzusetzen.
----------------------------------------------------------------------------------
Any ideas ? Olaf
View 3 Replies
View Related
Jun 27, 2014
I am trying to run a UNION ALL query in SQL SERVER 2014 on multiple large CSV files - the result of which i want to get into a table in SQL Server. below is the query which works in MSAccess but not on SQL Server 2014:
SELECT * INTO tbl_ALLCOMBINED FROM OPENROWSET
(
'Microsoft.JET.OLEDB.4.0' , 'Text;Database=D:DownloadsCSV;HDR=YES',
'SELECT t.*, (substring(t.[week],3,4))*1 as iYEAR,
''SPAIN'' as [sCOUNTRY], ''EURO'' as [sCHAR],
[Code] ....
What i need is:
1] to create the resultant tbl_ALLCOMBINED table
2] transform this table using PIVOT command with following transformation as shown below:
PAGEFIELD: set on Level = 'Item'
COLUMNFIELD: Sale_Week (showing 1 to 52 numbers for columns)
ROWFIELD: sCOUNTRY, sCHAR, CATEGORY, MANUFACTURER, BRAND, DESCRIPTION, EAN (in this order)
DATAFIELD: 'Sale Value with Innovation'
3] Can the transformed form show columnfields >255 columns i.e. if i want to show all KPI values in datafield?
P.S: the CSV's contain the same number of columns and datatype but the columns are >100, so i dont think it will be feasible to use a stored proc to create a table specifying that number of columns.
View 9 Replies
View Related
Aug 5, 2014
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
View 2 Replies
View Related
Jun 15, 2007
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
View 1 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Oct 30, 2015
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
View 0 Replies
View Related
Sep 3, 2007
Hi ,
I am having 2 data store .
1. Oracle 10g
2 SQL server 2000
My requirement is that , i need to insert some data from sql server database table to oracle database using sql server query analyser or interface.
If there is any way ,plz let me know it
Thanks
Abraham
View 3 Replies
View Related
Jun 28, 2005
I have the following query created in MS Access that I would like to convert to MS SQL Server, but I can't get the IF logic to work properly, any help you can provide would be greatly appreciated.
Code:
SELECT Customer.Last_Name, Customer.First_Name, Customer.Middle_Name, Customer.Address, Customer.City, Customer.Region, Customer.Postal_Code, Customer.Country, Orders.Order_ID, Customer.Customer_ID, Employees.LastName, Employees.FirstName, Order_Line.Item_ID, Item.[Long Description], Order_Line.Units_Purchased, Order_Line.Price, Order_Line.Discount, CCur(Order_Line.Price*[Units_Purchased]*(1-[Discount])/100)*100 AS ExtendedPrice, Store.Store_Address, Store.Store_City, Store.Store_State, Store.Store_Zip_code, Store.Store_Phone_Number, Store.Store_Fax_Number, Item.Taxable_Nontaxable,
IIf(Item.Taxable_Nontaxable=Yes,([ExtendedPrice]*Tax_Table.Tax_Rate),([ExtendedPrice]*0)) AS Tax_Amt,
Tax_Table.Tax_Rate
View 3 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Mar 5, 2015
I have a query:
SELECT CONVERT(char(3), dbo.tblCourses.CourseDate, 0) AS Month, YEAR(dbo.tblCourses.CourseDate) AS Year, SUM(CASE WHEN a.AttendanceStatus IN (9)
THEN 1 ELSE 0 END) AS [City CCG Attended], SUM(CASE WHEN a.AttendanceStatus IN (3) THEN 1 ELSE 0 END) AS [City CCG DNA],
SUM(CASE WHEN a.AttendanceStatus IN (7) THEN 1 ELSE 0 END) AS Cancelled, gp.CCGRegion
FROM dbo.tblGP_Practices AS gp INNER JOIN
[Code] ....
I wanted to add anohter column where it counts the results of the followign query:
SELECT dbo.tblPatient.NHSnumber, dbo.tblPatient.DateOfBirth, dbo.tblPatient.DateReferralReceived, dbo.tblGP_Practices.OrganisationCode
FROM dbo.tblPatient INNER JOIN
dbo.tblGP_PatientLink ON dbo.tblPatient.PatientID = dbo.tblGP_PatientLink.PatientID INNER JOIN
dbo.tblGP_Practices ON dbo.tblGP_PatientLink.GPPracticeID = dbo.tblGP_Practices.GPPracticeID LEFT OUTER JOIN
dbo.tblAppointments ON dbo.tblPatient.PatientID = dbo.tblAppointments.PatientID
WHERE (dbo.tblAppointments.PatientID IS NULL)
is this possible?
View 4 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Aug 7, 2001
My SQL 7.0 server is currently querying the SAM database on the PDC for Windows NT authentication. How can I force it to use the SAM database on the server(BDC) that I specify?
View 1 Replies
View Related
Nov 21, 2013
i need a query to return the top 10 tables in each database on a server. have used EXEC sp_msforeachtable 'sp_spaceused ''?''' which returns what I need for one db but I need it to loop through and gather the info for all dbs on server. maybe need cursor not sure. for reporting reasons i would like to include the name of the server and name of database.
View 3 Replies
View Related
Nov 29, 2007
if it is possible to run a distributed query against 2000 from 2005, what would the OPENDATASOURCE parameters look like? I'd like to be able to pivot without copying my older 2000 db to 2005 or using linked servers..
For reference, here's an example of a distrib query that reads excel...
ie SELECT * INTO XLImport3 FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C: estxltest.xls;Extended Properties=Excel 8.0')...[Customers$]
View 1 Replies
View Related
Jan 16, 2008
Hello
SQL 2000: 8.00.2187 x86, 8 way 700mhz, 6GB Ram
SQL 2005: 9.00.3042 IA64 2 Way Dual-Core 1.66Mhz 16 GB ram
Symptoms
Querys to the SQL 2005 box from SQL 2000 work but when the query is parameterised with non-literals (@variables) then the query run on the SQL 2005 box excludes any where clause causing the entire table to be returned to the SQL 200 box. When the query is parameterised using literal values the query is executed on SQL 2005 including the where clause.
At first I thought that the "Collation Compatible" setting was the culprit but setting this to 1 made no difference. Other SQL 2000 boxes work as expected and any queries from these using literal and non-literal parameters.
Please, any ideas?
Working
SELECT A.Column FROM linkedServer.IA.dbo.Table Where A.Column = 'value'
Not Working (correctly anyway!)
DECALRE @Value tinyint
SET @Value = 22
SELECT A.Column FROM linkedServer.IA.dbo.Table Where A.Column = @value
View 5 Replies
View Related
May 27, 2008
Hello,
I have a development and a production SQL server instance environment set up on 2 independent machines. Each machine is running Windows 2003 for an OS, while each server instance is version SQL Server 2005. On friday, I experienced difficulties querying one environment from the other through linked servers. I would get the error below:
.
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "dev_server". The provider supports the interface, but returns a failure code when it is used
The linked servers had been previously set up and had been running without any issues. Dropping and recreating the linked servers did not help at all, and all attempts to google the error led to accounts of either SQL Server 2005-SQL Server 2000 procedures compatibility or 64 bit - 32 bit compatibily related errors. Neither of the two were relevant as both my environment have the same technology, both hardware and software.
Mysteriously, the linked server worked this morning without any issue at all. One co-worker suggests gremlins are at work, while another figures that my set up had 'checked out for the long weekend'. Unfortunately, neither explanation is plausible, so my quest to find out what could have gone wrong, and hopefully put preventitive measures in place for the future goes on. Does anybody have any idea what the issue could have been?
Thanks,
Simba
View 1 Replies
View Related
Aug 4, 2015
I am trying to run a query from a Linked server "ABCD"
Set @SQLCMD = 'Select * from TableName"
Insert into @TempTableName
Execute (@SQLCMD) AT ABCD
I am getting below error while running the above statements. When I Remove the Insert into @TempTableName it is working fine.
The operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "ABCD" was unable to begin a distributed transaction.
View 2 Replies
View Related
Apr 4, 2008
Can someone please shed some light on what seems to me to be a common requirement.
If I create an alias or linked server to Server1 - say Alias1 - on Server1 and then use that name in a query on Server1, a remote/distributed query is always used (even though we are running on the local server and that overhead is completely unnecessary).
Is SQL Server really not capable of deciding that
select * from Alias1.db1.dbo.table1
and
select * from Server1.db1.dbo.table1
should be optimized and executed exactly the same when Alias1 is Server1, but that it is a distributed query ONLY when Alias1 is really referring to a remote server? I realize that the four part name is not necessary when I am referring to objects on the current server, but I am trying to write code that is server instance independent.
It just seems that if that is not possible, then the only way to create system independent stored procs that can run in dev, staging, and production environments and work with multiple databases on multiple servers is to create all sorts of scripts to regenerate all the procs whenever you move a database between servers?
If SQL Server is even close to the enterprise big iron server that MS now claims it is, it surely needs to support running in dev, staging, and production environments and work with multiple databases on multiple servers?!
I'm really looking for someone to tell me I'm missing something simple, and of course you can do this - but complex workarounds are invited too :-)
This is not something I am investigating as an academic exercise, I am already doing this, but I have to figure out how to do it better because with all these unnecessary distributed queries, performance is horrible.
Thanks
Sean
View 2 Replies
View Related
Aug 14, 2006
Hi everybody,
I have a query slower in SQL Server 2005 than in SQL Server 2000. I have a database in SQL 2000, I put it on the same server, but with SQL 2005 and the query take 5 seconds instead of 0 seconds. The DB compatibility is SQL Server 2000 (I tried with 2005 and result is the same). Execution plan seems right and I tried to change some DB options without results. It is weird, when I remove left join on MandatsEx, it take 2 seconds. The view currentEmployeeLevelHistoric returns 45 000 rows and mandatsex has 0 rows.
Here is the sample:
Select ls.EmployeNiveau.pk_EmployeNiveauID as NoNiveau,
IsNull(nullif(ls.Traduction.Description, ''), ls.TraductionDefaut.Description) + ' (' +
ls.currentLevelHIstoric.NoNiveau + ')' As Nom,
ls.currentEmployeeLevelHistoric.DebAssign As DateAssignationDebut,
ls.EmployeNiveau.assignmentReason As AssignmentReason,
ls.currentEmployeeLevelHistoric.FinAssign As DateAssignationFin,
ls.MandatsEx.noDossier, ls.MandatsEx.pk_MandatID,
'' As Period, ls.currentEmployeeLevelHistoric.NiveauPrincipal,
ls.currentEmployeeLevelHistoric.pk_emplNiveauHisto_Id,
ls.EmployeNiveau.fk_NiveauID_Niveaux, ls.EmployeNiveau.No_Ent_leg,
IsNull(nullif(TradPere.Description, ''), TradDefautPere.Description) + ' (' + NiveauPere.NoNiveau
+ ')' As NomSup,
ls.EmployeNiveau.No_Ent_leg + ls.EmployeNiveau.no_divisio + ls.EmployeNiveau.no_sec_eco +
ls.EmployeNiveau.no_etabli + ls.EmployeNiveau.no_mat as employeeScope,
case when ls.mandatExternalisation.fk_mandatID_MandatsEx is null then 2 else 1 end as
ContractCategory
From ls.currentEmployeeLevelHistoric
Inner Join ls.EmployeNiveau on
ls.currentEmployeeLevelHistoric.pk_EmployeNiveauID = ls.EmployeNiveau.pk_EmployeNiveauID
Inner join ls.currentLevelHistoric On
ls.EmployeNiveau.fk_NiveauID_Niveaux = ls.currentLevelHistoric.fk_niveauID_niveaux
Left Outer Join ls.TraductionDefaut On
ls.currentLevelHIstoric.fk_TraductionID_TraductionDefaut = ls.TraductionDefaut.pk_NoTraduction
Left Outer Join ls.Traduction On
ls.TraductionDefaut.pk_NoTraduction = ls.Traduction.No_Traduction and
ls.Traduction.Langue = 1
Left Join ls.MandatsEx on
ls.EmployeNiveau.fk_MandatID_MandatsEx = ls.MandatsEx.pk_MandatID
Left Join ls.mandatExternalisation on
ls.MandatsEx.pk_MandatID = ls.mandatExternalisation.fk_mandatID_MandatsEx
left Join ls.Niveaux as NiveauPere on
NiveauPere.niveauID = ls.currentLevelHIstoric.supId
Left Outer Join ls.TraductionDefaut As TradDefautPere On
NiveauPere.fk_TraductionID_TraductionDefaut = TradDefautPere.pk_NoTraduction
Left Outer Join ls.Traduction As TradPere On
TradDefautPere.pk_NoTraduction = TradPere.No_Traduction and
TradPere.Langue = 1
Where ls.EmployeNiveau.fk_EmploID_Emplos = 345158 and (convert(varchar,
ls.currentEmployeeLevelHistoric.DebAssign, 112) <= '20060802' and
(ls.currentEmployeeLevelHistoric.FinAssign is null or
convert(varchar, ls.currentEmployeeLevelHistoric.FinAssign, 112) >= '20060802'))
Thank you
Steve Gadoury
View 13 Replies
View Related
Mar 23, 2000
I need to query data in a table located on Server "A" from Server "B".
I do not want to use replication. The only way I know of to do this is
have a process on server "A" run which creates a output text file out on the network. Then have a process on server "B" pick up that text file and BCP it into a table on Server "B".
Isn't there a cleaner way of doing this?
View 7 Replies
View Related
May 5, 2008
Hi all,
I need your help.
I have 2 different databases. One of them is in the SQL Server 2000 and the other on is in the SQL Server 2005. I need to make a query out of these 2 databases.
Is there any way that I can do this?
Thanks,
View 12 Replies
View Related
