I've got a .dts which load data to several Sql2k servers by Copy SQL Server Objects Task. I'd like to add another task for a Sql25k but I can't because of it's requesting SMO.
It seems that such task need DMO. I know that there are other ways for do such stuff in that DTS but I wonder if there is any trick or shortcut for to avoid this barrier.
VB.NET 2005 Express and SQL Server 2005 Express - NOT saving updates to DB - SOLUTION!
-----------------------------------
The following article is bogus and confusing:
How to: Manage Local Data Files - Setting 'Copy to Output Directory' to 'Do not copy'
http://msdn2.microsoft.com/en-us/library/ms246989.aspx
You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.
Do not copy
The file is never copied or overwritten by the project system. Because your application creates a dynamic connection string that points to the database file in the output directory, this setting only works for local database files when you manually copy the file yourself.
You must manually copy the database file to the output directory
AFTER setting 'Copy to Output Directory' to 'Do not copy'.
-----------------------------------
The above article is bogus and confusing.
This is rediculous!
This is the most vague and convoluted bunch of nonsince I've ever come accross!
Getting caught out on this issue for the 10th time!
And not being able to find an exact step-by-step solution.
--------------------------
I've tried it and it doesn't work for me.
Please don't try what the article eludes to as I'm still sorting out exactly what is supposed to be happening.
If you have a step-by-step procedure that can be reproduced this properly please PM me.
I would like to test its validity then update this exact post as a solution rather than just another dicussion thread.
Many thanks.
This is the exact procedure I have come up with:
NOTE 1: DO NOT allow VB.net to copy the database into its folders/directorys.
NOTE 2: DO NOT hand copy the database to a folder/directory in your project.
Yes, I know its hard not to do it because you want your project nice and tidy.
I just simply could NOT get it to work.
You should NOT have myData.mdf listed in the Solution Explorer. Ever.
Create a folder for your data following NOTE 2.
Copy your data to that folder. * mine was C:mydatamyData.mdf
Create a NEW project.
Remove any Data Connections. ( no matter what)
Save it.
Data | View Data Sources
Add New Data Source
select NEW CONNECTION ( No Matter what, do it!
Select the database. * again mine was C:mydatamyData.mdf
Answer NO to the question:
Would you like to copy the file to your project and modify the connection?
- NO ( no matter what - ANSWER NO ! - Absolutely NO )
Then select the tables you want in the DataSet.
and Finish.
To Test ----------
From the Solution Explorer | click the table name drop down arrow | select details
Now Drag the table name onto the form.
The form is then populated with a Navigation control
and matching Labels with corresponding Textboxes for each field in the table.
Save it.
1) Run the app.
Add one database record to the database by pressing the Add(+) icon
Just add some quick junk data that you don't mind getting lost if it doesn't save.
YOU MUST CLICK THE SAVE ICON to save the data you just entered.
Now exit the application.
2) Run the app again.
And verify there is one record already there.
Now add a second database record to the database by pressing the Add (+) icon.
NOW add some quick junk data that you WILL intentionally loose.
*** DO NOT *** press the save icon.
Just Exit the app.
3) Again, Run the app.
Verify that the first record is still there.
Verify that the Second record is NOT there.
Its NOT there because you didn't save the data before exiting the app.
Proving that YOU MUST CLICK THE SAVE ICON to save the data you just entered.
Also proving you must add your own code to catch the changes
and ask the user to save the data before exitiing or moving to another record.
As a side note, since vb.net uses detached datasets,
(a copy/snapshot of the dataset in memory and NOT directly linked to the database)
the dataset will reflect all changes made when moving around the detached datasets.
YOU MUT REMEMBER TO SUBMIT YOUR CHANGES TO THE DATABASE TO SAVE THEM.
Otherwise, they will simply be discarded without notice.
Whewh!
I hope this saves me some time the next time I want to start a new database project.
Oh, and uh, for anyone else reading this post.
Thanks,
Barry G. Sumpter
Currently working with:
Visual Basic 2005 Express
SQL Server 2005 Express
Developing Windows Forms with
101 Samples for Visual Basic 2005
using the DataGridView thru code
and every development wizard I can find within vb.net
unless otherwise individually stated within a thread.
Let say I have a table that is composed of 11 columns - one the Primary Key and the other are keys to rows in another table. Of these 10 column 2-10 are nullable. Can I get all the info in one SELECT? I can't use JOINS because columns 1-10 are keys to the same table. I am not very good at explaining these things but hopefully it makes sense.
Thanks
Using SQL 7 (of course), is there a way to give a user access to create and modify Stored procedures without actually giving them DBO rights?
View 1 Replies View RelatedHi folks, guidance required!
Clients have an MSDE installed and they need all of their data to be dowloaded for the first time from our website. 30 tables r involved.
Can i automate this? I suspect BCP allows only one table to be exported into a text file. Since it's the first time process i don't want to setup replication.
Howdy!
Hello All,
I have a transaction table that holds nearly a million records and my master with 60000 records,I want to fetch details based on two dates.
I use Union operator to query the info from a view,is this right or fetch the result into a temporary table and fetch the result from temporary table using the same Union operator.
Which is the better way to fetch details faster.
Nirene
My SP is pasted below just advice me to execute this more efficiently,cos this SP is called thru a Web application.
CREATE PROCEDURE GL @SDt Varchar(10),@EDt Varchar(10),@Loccode Char(5),@OP Char(4)
AS
Declare @OpBalQry NVarchar(1000),@TrnQry NVarchar(2000),@MainSQry NVarchar(500),@MainEQry NVarchar(500)
Declare @Cocode Char(5)
Declare @CashGL Char(6),@Gldesc Varchar(50)
IF EXISTS (Select 1 FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE='BASE TABLE' AND TABLE_NAME='#Gltmp')
Begin
Drop Table #Gltmp
End
Select @Cocode=Cocode from Location Where Loccode=@Loccode
Select @CashGL=Glcode,@Gldesc=Gldesc from Glmast Where Cocode=@Cocode and Subgroupcode='CASH'
Set @OpBalQry='Select A.Glcode,'''' as Trtype,''' + @SDt + ''' as Refdt,'' Opening Balance'' as Refno,
Max(B.Gldesc) as Narration,Case When (Sum(A.Deb)-Sum(A.Cre))<0 Then (-1*(Sum(A.Deb)-Sum(A.Cre))) Else 0 End as Dr,
Case When (Sum(A.Deb)-Sum(A.Cre))>=0 Then (Sum(A.Deb)-Sum(A.Cre)) Else 0 End as Cr from
(
Select Glcode,
(Case When Drcrflag=''D'' Then Opbal Else 0 End) as Deb,
(Case When Drcrflag=''C'' Then Opbal Else 0 End) as Cre from Obdata
Union
Select Glcode,
(Case When Drcrflag=''D'' Then Tramt Else 0 End) as Deb,
(Case When Drcrflag=''C'' Then Tramt Else 0 End) as Cre from Trans_Journal
Where Refdt <Convert(Datetime,''' + @SDt + ''',103)
) A,Glmast B Where B.Cocode=''' + @Cocode + ''' and A.Glcode=B.Glcode Group By A.Glcode
Union
'
Set @TrnQry='SELECT T.Glcode,T.Trtype,Convert(Varchar,Max(T.Refdt),103) as Refdt , '''' AS Refno,
(Rtrim(Ltrim(Max(G.Gldesc))) + '' -- From Sub-Ledger'') AS Narration,
SUM(CASE WHEN T.Drcrflag = ''D'' THEN T.tramt ELSE 0 END) AS Dr,
SUM(CASE WHEN T.Drcrflag = ''C'' THEN T.tramt ELSE 0 END) AS Cr
FROM Trans_Journal T,Glmast G
WHERE T.Glcode=G.Glcode and G.Cocode=''' + @Cocode + ''' and (T.Slcode IS NOT NULL AND Len(Rtrim(Ltrim(T.Slcode)))>0) and
(T.Refdt>=Convert(Datetime,''' + @SDt + ''',103) and T.Refdt <=Convert(Datetime,''' + @EDt + ''',103)
and T.Loccode= ''' + @Loccode + ''' and (G.Subgroupcode<>''BANK'' or G.Subgroupcode<>''CASH''))
GROUP BY T.Glcode,T.Trtype
UNION
SELECT A.Glcode,'''' as Trtype,Convert(Varchar,A.Refdt,103) as Refdt, A.Refno, B.Gldesc AS Narration,
CASE WHEN A.Drcrflag = ''D'' THEN A.Tramt ELSE 0 END AS Dr,
CASE WHEN A.Drcrflag = ''C'' THEN A.Tramt ELSE 0 END AS Cr
FROM Trans_Journal, Glmast B
WHERE (A.Glcode = B.Glcode and B.Cocode=''' + @Cocode + ''') and
(A.Slcode IS NULL OR Len(Rtrim(Ltrim(A.Slcode)))=0) and
(A.Refdt>=Convert(Datetime,''' + @SDt + ''',103) and A.Refdt<=Convert(Datetime,''' + @EDt + ''',103))
and A.Loccode=''' + @Loccode + ''' and (B.Subgroupcode<>''BANK'' or B.Subgroupcode<>''CASH'')
Union
Select Glcode,Trtype,Convert(Varchar,Max(Refdt),103) as Refdt,'' '' as Refno,Max(Narration) as Narration,Sum(Dr) as Dr,Sum(Cr) as Cr from
(Select A.Glcode,A.Trtype,A.Refdt,B.Gldesc as Narration,
CASE WHEN A.Drcrflag =''D'' THEN A.Tramt ELSE 0 END AS Dr, CASE WHEN A.Drcrflag =''C'' THEN A.Tramt ELSE 0 END AS Cr
from Trans_Journal,Glmast B
WHERE
(A.Glcode=B.Glcode and B.Cocode=''' + @Cocode + ''' and A.Refdt>=Convert(Datetime,''' + @SDt + ''',103)
and A.Refdt<=Convert(Datetime,''' + @EDt + ''' ,103)
and A.Loccode=''' + @Loccode + ''') and (B.Subgroupcode=''BANK'' or B.Subgroupcode=''CASH'')
Union
Select ''' + @CashGL + ''' as Glcode,Trtype,Refdt,''' + @Gldesc + ''' as Narration,
CASE WHEN Drcrflag =''C'' THEN Tramt ELSE 0 END AS Dr, CASE WHEN Drcrflag =''D'' THEN Tramt ELSE 0 END AS Cr
from Trans_Transnarr
WHERE (Trtype=''CPM'' or Trtype=''CRT'') and Loccode=''' + @Loccode + ''' and
Refdt>=Convert(Datetime,''' + @SDt + ''' ,103) and Refdt<=Convert(Datetime,''' + @EDt + ''',103)) TT
Group By Glcode,Trtype) X'
Set @MainSQry='Select Glcode,Trtype,Refdt,Refno,Narration,Dr,Cr Into #Gltmp from ('
Declare @Fullqry NVarchar(4000)
If @OP='WOB'
Begin
Set @TrnQry = @OpBalQry+@TrnQry
End
Set @FullQry = @MainSQry+@TrnQry
Exec sp_executesql @FullQry
Select Glcode,Trtype,Refdt,Refno,Narration,Ltrim(Rtrim(Str(Dr,14,2))) as Dr,Ltrim(Rtrim(Str(Cr,14,2))) as Cr from #Gltmp SQL2XML
Where Dr+Cr<>0 Order By Glcode,Trtype,Refdt,Refno for XML AUTO
Drop Table #Gltmp
GO
hi,
i want to get following output:
id_order | type | number
-------------------------
1234 | A | 1
1235 |A | 0
1235 |B | 0
1236 |B | 1
1237 |C | 0
1237 |D | 0
create table tbl_order
(
id_order int
,type nvarchar(40)
)
insert into tbl_order (id_order, type) values (1234, 'A' )
insert into tbl_order (id_order, type) values (1235, 'A' )
insert into tbl_order (id_order, type) values (1235, 'B' )
insert into tbl_order (id_order, type) values (1236, 'B' )
insert into tbl_order (id_order, type) values (1237, 'C' )
insert into tbl_order (id_order, type) values (1237, 'D' )
insert into tbl_order (id_order, type) values (1238, 'A' )
insert into tbl_order (id_order, type) values (1239, 'D' )
insert into tbl_order (id_order, type) values (1239, 'B' )
insert into tbl_order (id_order, type) values (1239, 'A' )
select
id_order
,type
--,isnull(orderX,'') as number
,case when orderX > 1 then 1 else 0 end as number2
from tbl_order
left join (select t2.id_order as orderX
from tbl_order as t2
where
(select count(t1.id_order)
from tbl_order as t1
where
t1.id_order = t2.id_order) = 1
)as x
on tbl_order.id_order = x.orderX
Is there any better/faster select sentance to do this? i'm using sql2000.
thank you
Hi, i am not sure if i can solve the problem with SSIS. I wanted do do it hardcoded with C# or so.
So, for my project I need to download zip-files on a daily-base. In these zip-files are xml-Files. And in these files is information stored for inserting or updating tables on a MS-SQL-Server.
So, my question, is it possible to solve that with SSIS? And if, is it easy to understand and to learn within a few days?
I haven't found good sources for information on how to get the data out of XML-Files.
Dear All expertise please help me
The following is the table structure of Holiday
EmployeeID(Integer)
HolidayFrom(date)
HolidayTo(date)
The following record exist in the table
EmployeeId HolidayFrfom Holidayto
-----------------------------------------------------------------------------------------------
5 25/12/2007 28/12/2007
1 02/01/2008 10/01/2008
2 03/01/2008 03/01/2008
3 25/01/2008 27/01/2008
I want a report to get the employee who did take the leave from the given date range. For example I am giving the date range as follows
Criteria for Report
----------------------------------
date from 03/01/2008
Date to 04/01/2008
When I given the date range as above two record have to be displayed . Because Employee 1 and 2 will be on leave on that date.
EmployeeId HolidayFrfom Holidayto
-----------------------------------------------------------------------------------------------
1 02/01/2008 10/01/2008
2 03/01/2008 03/01/2008
So please help me to find out an SQL to display the records from the given criteria of two date range
Hi all,
I think i have a quite specific problem that we have to resolve with replication. however, i don't know which type of replication to use and how to configure it for this:
To simplify the case a bit:
We have one central server which has a table Sales(id, shopid, article).
Also our 50 shops have the same table Sales(id, shopid, article).
spec 1:
When a shop sells an article, the row of the Sales table at the local shop has to be replicated to the central server. This way, the central server its Sales table has all sold articles from all shops.
spec2:
But now we have also an internet shop. All e-orders arrive immediately in the table Sales at the Central Serve with a specific shopid where the article will arrive. Now i have to find a way to replicate the new rows from the Central Server to the specific Shop.... Remark: the other shops should not have rows of other shops.
which type of replication would i use the best and how?
Thanks !
The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation) (Microsoft.ReportingServices.Diagnostics)
Please: a step by step solution.
I'm running VS 2005 Enterprise, and SQL Server 2005 Developer / workgroup edition.I'm trying to follow a few online examples to play around, and some of these examples require that you add a SQL DB to your solution by going:-right click on website-Add new Item-Add SQL DataBase.WHen I do that, I get the error that SQL Express isn't installed. Now the question is, why would I want SQL Express installed when I have SQL server 2005 already installed? My Machine can support it, but it's sort of a waste when I need to run SQL Server 2000, SQL Server 2005 and then SQL Server express all at the same time.Any advice?
View 3 Replies View RelatedDear All,
I'm new in SQL Server 2000. Anyone has a good materials or sites to recommend which talk about Multidimensional Expression? Especially MDX work in "Analysis Manager".
You information are highly appreaciate. Thanking you in advance.
can anyone please point me to any good links for scalable solutions in sql server..
thanks
Thought I'd got my head round using a set-based approach but my brain's gone dead on this one
CREATE TABLE #mytable (SWID INT , T INT , DateA DATETIME , DateB DATETIME)
INSERT #mytable (swid , t , DateA , DateB)
SELECT 63967 , 1 , CAST('31-Mar-2006' AS DATETIME),CAST( '01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 1 , CAST('31-Mar-2006' AS DATETIME),CAST( '01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 , CAST('31-Jan-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 63967 , 9999 ,CAST( '31-Jan-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 1 ,CAST('31-Mar-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 1 ,CAST( '31-Mar-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 0 , CAST('15-Mar-2006' AS DATETIME), CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 0 , CAST('15-Mar-2006'AS DATETIME) , CAST( '01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) ,CAST( '01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '28-Feb-2006'AS DATETIME) , CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Jan-2006'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Jan-2006'AS DATETIME), CAST('01-Feb-2007'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 , CAST('31-Dec-2005'AS DATETIME) , CAST('01-Aug-2006'AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '31-Dec-2005' AS DATETIME), CAST('01-Feb-2007' AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST('30-Nov-2005'AS DATETIME) , CAST( '01-Aug-2006' AS DATETIME)
UNION ALL
SELECT 10051 , 9999 ,CAST( '30-Nov-2005' AS DATETIME), CAST('01-Feb-2007' AS DATETIME)
select * from #mytable order by SWID desc, DateA desc
The Columns where T values are 1 and 0 are OK having already been derived. I need to UPDATE the remaining rows from the Default T Value of 9999
to Decrementing values (starting at -1) commencing at the highest remaining (ie non 9999 T Value) DateA value and working 'backwards'
'grouping' on SWID
The DateB value is irrelevant for this purpose
The desired output is below with derived T values
SWIDTDateADateB
6396712006-03-31 00:00:00.0002006-08-01 00:00:00.000
6396712006-03-31 00:00:00.0002007-02-01 00:00:00.000
6396702006-03-15 00:00:00.0002006-08-01 00:00:00.000
6396702006-03-15 00:00:00.0002007-02-01 00:00:00.000
63967-12006-02-28 00:00:00.0002006-08-01 00:00:00.000
63967-12006-02-28 00:00:00.0002007-02-01 00:00:00.000
63967-22006-01-31 00:00:00.0002006-08-01 00:00:00.000
63967-22006-01-31 00:00:00.0002007-02-01 00:00:00.000
1005112006-03-31 00:00:00.0002006-08-01 00:00:00.000
1005112006-03-31 00:00:00.0002007-02-01 00:00:00.000
1005102006-03-15 00:00:00.0002006-08-01 00:00:00.000
1005102006-03-15 00:00:00.0002007-02-01 00:00:00.000
10051-12006-02-28 00:00:00.0002006-08-01 00:00:00.000
10051-12006-02-28 00:00:00.0002007-02-01 00:00:00.000
10051-22006-01-31 00:00:00.0002006-08-01 00:00:00.000
10051-22006-01-31 00:00:00.0002007-02-01 00:00:00.000
10051-32005-12-31 00:00:00.0002006-08-01 00:00:00.000
10051-32005-12-31 00:00:00.0002007-02-01 00:00:00.000
10051-42005-11-30 00:00:00.0002006-08-01 00:00:00.000
10051-42005-11-30 00:00:00.0002007-02-01 00:00:00.000
Thanks in advance
Hi there,
Looking for a bit of help with my problem:
Say i have 3 tables-
tblClients
clientID (primary key identity/autonumber)
clientName (varchar 50)
tblCities
cityID (primary key identity/autonumber)
cityName (varchar 50)
tblClientsCities
ID (primary key identity/autonumber)
clientID (int)
cityID(int)
A client can be located in more than 1 city so i have tblClientsCities (think thats the right way to do it). Say i add a new client and the autonumber changes to "10" which is that client's identifier. How do i then add that identifier to tblClientsCities? I mean it could have been 3,7,205 absolutley anything.
I thought is would be easier to make up a unique key for each client with a script eg
client name: PJ Computers
Unique key Generated: PJCOMP58784
Now that the primary key is known in advance it can be added to tblClients and then tblClientCities. But! i was reading around and many seem to think primary key's like this will slow things down.
So my question is what's the best way of accomplishing this?
Any help would be much appreciated, thanks :)
Hi ,
What is the best Backup plan that can be give for a sql databse that is on a very high usage.
Will a six hour backup will decrease the performance of the SQL server...
Sipin
CREATE TABLE [Cube_fact_table] (
[ISIN_ID] [bigint] NOT NULL ,
[CLIMSTID] [bigint] NOT NULL ,
[HOLDID] [bigint] NOT NULL ,
[Quantity] [bigint] NULL ,
[Holding] [numeric](15, 0) NOT NULL ,
[Cost] [numeric](18, 3) NOT NULL ,
[Close_Price] [numeric](18, 3) NOT NULL ,
[Tran_Value] [bigint] NULL ,
[Date] [datetime] NULL ,
[UCOA] [bigint] NULL ,
[COA] [bigint] NULL
) ON [PRIMARY]
GO
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('1', '1', '1', '2000', 2000, 170.100, 170.100, '340200', '11/28/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('1', '1', '3', '-1000', 1000, 185.500, 185.500, '-185500', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '5', '48600', 48600, 225.000, 225.000, '10935000', '11/27/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '8', '-48575', 25, 243.000, 243.000, '-11803725', '12/4/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '9', '12575', 12600, 254.000, 254.000, '3194050', '12/5/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '10', '-12120', 480, 232.000, 232.000, '-2811840', '12/5/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '11', '12120', 12600, 219.000, 219.000, '2654280', '12/6/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '12', '-12120', 480, 265.000, 265.000, '-3211800', '12/6/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '13', '4261', 4741, 224.000, 224.000, '954464', '12/8/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '14', '9059', 13800, 223.000, 223.000, '2020157', '12/11/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '15', '10200', 24000, 233.000, 233.000, '2376600', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '16', '-12188', 11812, 243.000, 243.000, '-2961684', '12/12/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '17', '12188', 24000, 234.000, 234.000, '2851992', '12/13/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '18', '-12188', 11812, 234.000, 234.000, '-2851992', '12/13/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '19', '788', 12600, 254.000, 254.000, '200152', '12/16/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '20', '8000', 20600, 223.000, 223.000, '1784000', '12/17/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '21', '-13754', 6846, 231.000, 231.000, '-3177174', '12/17/2003 12:00:00 AM', NULL, NULL)
INSERT [cube_fact_table] ([ISIN_ID], [CLIMSTID], [HOLDID], [Quantity], [Holding], [Cost], [Close_Price], [Tran_Value], [Date], [UCOA], [COA]) VALUES ('2', '1', '22', '10554', 17400, 245.000, 245.000, '2585730', '12/19/2003 12:00:00 AM', NULL, NULL)
Now what i want to do is this ...
UCOA is to be updated with the average of all previous transactions where the climstid and isin_id are the same.
example
take case where holdid(transaction no) in the sample data is 14.
What i need is a query which will sum up the data in the tran_value column upto holdid 5.
Again I need a set based solution. Gurus .. please help
SQL Gurus,
What is the best backup solution?
Product:MS SQL 2000 Enterprise Edition
Environment:webserver
Goal:Off-site backup of database without onsite tech intervention
Obstacles:
* Webhost does not want SQL Server Agent running for fear of viruses
* Database is 3.4GB, LDF is 3.7GB, and a Full Backup is 3.1GB.
Connection / Access:Enterprise Manager, RDP and FTP all work to access data and backups.
I have looked into doing a full backup then differential backups, doing transaction replication, and log shipping. The client doesn't really need replication, he just wants to know that if his server with the production database goes up in flames he has a way of getting back in business without losing more than one day of data.
I am hoping there is a method of "restoring" on his off-site server the data that is "backed up" on the production server. Is that possible if we're doing differential backups?
Is that the best solution or is there a better way?
Thanks for any recommendations or advice,
Alec Sherman
These two queries when executed seperately give results in under 10 secs A union between these two does not give results even after 20 minutes ... Any idea why this is happening SELECT T001W.NAME1, t25a5.bezek SKU, QTY = SUM(CASE MSEG.BWART WHEN '101' THEN MSEG.ERFMG WHEN '102' THEN (-1)*MSEG.ERFMG END), YPLNT.VKGRP FROM MARA ,MSEG, MKPF,YPLNT,T001W,t25a5 WHERE MSEG.MANDT = MKPF.MANDT AND MKPF.MANDT = MARA.MANDT and mkpf.mandt =yplnt.mandt and mkpf.mandt = t25a5.mandt AND MKPF.MBLNR = MSEG.MBLNR AND MARA.MATNR = MSEG.MATNR AND YPLNT.PPLNT= MSEG.WERKS AND MSEG.WERKS = T001W.WERKS and t25a5.ww004 = SUBSTRING(MARA.PRDHA, 10, 3) AND MARA.PRDHA <> '' AND MKPF.VGART IN ('WR','WF') AND MKPF.MJAHR=YEAR(@BUDAT1) AND MSEG.AUFNR IS NOT NULL AND MSEG.BWART IN ('101','102') GROUP BY t25a5.bezek,T001W.NAME1,YPLNT.VKGRP SELECT T001W.NAME1, t25a2.bezek SKU, QTY = SUM(CASE MSEG.BWART WHEN '101' THEN MSEG.ERFMG WHEN '102' THEN (-1)*MSEG.ERFMG END), YPLNT.VKGRP FROM MARA ,MSEG, MKPF,YPLNT,T001W,t25a2 WHERE MSEG.MANDT = MKPF.MANDT AND MKPF.MANDT = MARA.MANDT and mkpf.mandt =yplnt.mandt and mkpf.mandt = t25a2.mandt AND MKPF.MBLNR = MSEG.MBLNR AND MARA.MATNR = MSEG.MATNR AND YPLNT.PPLNT=MSEG.WERKS AND MSEG.WERKS = T001W.WERKS and t25a2.ww001 = SUBSTRING(MARA.PRDHA, 1, 3) AND MARA.PRDHA <> '' AND MKPF.MJAHR=YEAR(@BUDAT1) AND MKPF.VGART IN ('WR','WF') AND MSEG.AUFNR IS NOT NULL AND MSEG.BWART IN ('101','102') GROUP BY t25a2.bezek,T001W.NAME1,YPLNT.VKGRP
View 14 Replies View RelatedI am trying to return a result from a select statement where I want unique (distinct) records but i want to return other columns as well as the distinct column. for example
select distinct field1, field2 from mytable
I want unique records for field1 but for those records returned I also want their field2 value. It seems distinct is not the correct choice for this. I have a hard time imagining there is not a standard solution for this. Can anyone tell me? Thanks in advance!!!!
Tim
I have a project named MF_SQL and i have created packages, config files for it, now I need to change the name of the project from MF_SQL to OLF_STG_ACC. So what should i do now to change this. If i change the name what are all the objects affected and what should i do to correct those?
Sarvan
How can I get a all the Tickets Information related to one chain
If you see TicketID = 9 This has been replaced by TicketID 1571,
If you see TicketID = 12 This has been replaced three times.
If I pass 1574 to a SP , I need the whole chain ( i.e 1574 , 1573 , 1572 , 12 ) .
Is there a SET Based Solution for this
TicketID OldTicketID CancelReplaceStatus
----------- ----------- -------------------
2 NULL NULL
3 NULL NULL
4 NULL NULL
5 NULL NULL
6 NULL NULL
7 NULL NULL
9 NULL R
1571 9 NULL
10 NULL NULL
11 NULL NULL
12 NULL R
1572 12 R
1573 1572 R
1574 1573 NULL
Thx in Advance
Venu
hi
i wanted to know the solution to the following query.
Movie( title: string, year: integer, length: integer, inColor: boolean, studioName: string, producerC#: integer)
StarsIn( movieTitle: string, movieYear: integer, starName: string)
MovieStar( name: string, address: string, gender: char, birthdate: date)
MovieExec( name: string, address: string, cert#: integer, netWorth: integer)
Studio( name: string, address: string, presC#: integer)
QUESTION FOR THE QUERY
"Print the total film length for those producers who made at least one film prior to 1930."
I volunteer for a non-for profit group and they have alot of names in amultiple databases. the problem is that some people are in multipledatabases. and if they send out a mailing from multiple databases somepeople get 2 and 3 of the same thing. my idea was to either make or find aprogram that has everyone is 1 database and then make the people part ofmultiple groups. (ex: bill is part of group a and b and im doing a mailingfrom both group i only want 1 piece of mail to go to him).It can be a separate program or with access. that use access now but i cantfigure out how to make my idea work.any question please ask.tiaStephen
View 2 Replies View RelatedLet me know what you think about the following code:DECLARE @MaxIdValue intDECLARE @MaxSortFieldValue nvarchar(50)SELECT TOP 1 @MaxIdValue = [id], @MaxSortFieldValue = [SortField]FROM (SELECT TOP PageNumber*RowsPerPage [id], [SortField]FROM MyTableWHERE (FilterCondition) ORDER BY [SortField], [id]) TORDER BY [SortField] DESC, [id] DESCSELECT TOP RowsPerPage * FROM MyTableWHERE ([SortField] >= @MaxSortFieldValue) AND (([id] > @MaxIdValue) OR([SortField] <> @MaxSortFieldValue)) AND (FilterCondition)ORDER BY [SortField], [id]This is a dynamic SQL and it should be easily fixable.PageNumber, RowsPerPage, FilterCondition and SortField are going to bethe variables and will be based on the user's searchcondition/criteria.-----------------------------Thanks for you attention.
View 2 Replies View RelatedHi,
When I create a new Project, I am not getting a solution name in the Solution Explorer. It is starting from the Project Name only.
So when I create a Package Deployment Utility, I am not getting a DTSInstall.exe file in the deployment folder.
Pls guide me.
Thanks & Regards,
Prakash Srinivasan
Hi,
So far, with other programming platforms, I used to have the facility, embedded within application .exe, to:
1- Interface with already existing "multi-user" database (ex: Oracle, Access, etc.)
2- Create/access "local"/"Single-User" files for processing purposes. (try to minimize network trafic...)
So far, I've read a lot about SQL Server products (SQL Server, Sql Server Express, SQL Server CE), at least all articles I could find, and would like to have your opinion on what would be the best approach?
1- What SQL version to use for "multi-user" databases?
2- What SQL version to use for "single-user" databases/files?
3- Can SQL Express allow me to achieve both "multi-user" and "single-user" approaches within same app? If not, what would you rather suggest?
Thanks in advance,
Stéphane
I don't have much background with SSIS or SQLServer or development for that matter. I was thrust in to this and I apologize if my questions are not up to snuff in any way.
I have built an SSIS package based on the import/export wizard and have customized it by adding a For Each Loop container for processing multiple source data files and it works great so far but I need to add some advanced functionality to make it more flexible. I'm having some problems with the best way to enhance the solution and I'm getting frustrated with variables and expressions, which is what I think I need to use. Hopefull what I need is something that's doable.
The package processes mutliple source files using the For Each Loop. The data is stored in a destination table that is dropped and recreated each time. I've also added a couple of CREATE INDEX statements to the source SQL.
I need to make the SQL DROP, CREATE TABLE and INDEX statements dynamic based on part of the filename string. I'm capturing the filename in the FOR EACH container using Variable Mapping. What I need to do is parse out part of the string from the filename and use it in the SQL statements. An example would be CREATE TABLE XXX_[stringvar] where [string] comes from the variable mapping done in the For Each loop.
My thinking was to setup a new variable within the scope of the SSIS package and enable Evaluate as Expression and then build an expression for the varible where I parse out the string from the filename variable that already exists. So if the filename was filename.filetype and I needed the last 4 characters from the filename the string value would be whatever characters were in 'name' each time. But there isn't an expression builder editor built in to the variable properties expression element, so I'm not clear that I can actually create a variable in SSIS and then have it's value be set using an expression. It seems to me that if this was doable, then the expression builder I've seen elsewhere in SSIS would be visable.
Then I was hoping I could edit the SQL behind the DROP and CREATE statements where I've hard coded the table name and insert the variable right in the SQL. My SQL isn't that strong and I don't know how to work with variables but I was thinking the SQL would look like CREATE TABLE XXX_@[stringvar].... I believe another approach would be to setup another string variable for the entire SQL statement and build the statement string dynamically. But I don't know if this is necessary or better.
Anyway, I hope someone can help and that my original post is clear enough.
Thanks
I've setup a linked server to db2 and can query the table. I have been able to get around a number of performance issues, but am stuck. I think my issue has to do with not enough bandwidth and the size of the data on db2. The table on db2 that I need to access data through the linked server is over 300MB. Right now I just have to import this data each night via my linked server into the sql server. I would like a way to get the most current data available in my applications and this is why I was going with the linked server option. I was thinking about trying to use replication as a solution to the problem. I am not really sure if this is a good idea.
Does anyone have any suggestions on how to tackle this problem?
Alright, me and mine are planning of creating a big community, ( no futher details possible )
The point is that, we got 1 webserver with php who's reading out a huge database.
That database is beeing updated by some of a 100 users, all these users are updating the db at the same time. so as you can see, what we need is a good and reliable database witch can easily hold up this lot of data.
Wich database type do you guys recommend?
Hi
i'm dealing with Concurrency Issue in SQL Server 2005,
let me explain me what i want to do
I have a table
UserInfromation
ID (PK - Int autogenerated )
Name ( Varchar(20) )
Age ( int )
LastModifiedDateTime
User 'A' inserts a record in UserInformation Table
1 John 20 12/12/2005 15:30 PM
i have written Stored Procedure which Get's the records from UserInformation Table
again i have one more stored Procedure which updates the UserInformation already entered in UserInfromation Table
if User 'A' runs the Get StoredProcedure on his machine and binds the Dataset ( result ) to GridView at 10:00 AM
A User 'B' runs the Get Stored Procedure on his machine and binds the DataSet ( Result ) to GridView at 10:01 AM
both users are looking at the same same data which was entered by User 'A'
now User 'A' Updates the Record (i.e)
1 John 20 12/12/2005 15:30 PM
to
1 Kemp 50 12/12/2005 10:05 PM
at 12/12/2005 10:05 PM
but the User 'B' is still looking at the data which contains
1 John 20 12/12/2005 15:30 PM
which means the data is invalid,
so my question is how User 'B' is goin to get the notification that the data which he is currently seeing is old one and someone else has modified the data
To solve this problem i have a LastModifiedDateTime Column in UserInformation table which keeps the record of when this data( row ) was modified
what i do is when i get the data from my get stored procedure i get all the columns from the Table and when i modify the selected record i pass the required information in Input Parameter ie. ID ,UserName ,Age , LastModifiedDateTime ( this is the datetime which was saved when the particular record was modified ) , now i'm using the LastModifiedDateTime value and comparing it with the same ID's record.
e.g.
while Running the Get Stored Procedure i'm getting
1 John 20 12/12/2005 15:30 PM
when i'm executing Update Procedure i'm passing values as
1 Kemp 50 12/12/2005 15:30 PM
in my update Stored Procedure i'm comparing the Passed date 12/12/2005 15:30 PM with the current value in the same Id's i.e. ID = 1 LastModifiedDateTime Column if the date which is passed by the user as input parameter is different then the passed ID's LastModifiedDateTime columns value then the stored Procedure will raise and error that the "Data has been changed , request user to Refresh the Data"
my Question is , Is there any other way that i can implement concurrency issue in SQL Server 2005 . Please let me know
Thanks,
SpidyNet
I added something by mistake! If I delete it it gives me an `are you sure?` message that makes me think it'll actually delete the file from the hard drive. As I've accidentally added something from SQL Server (I was trying to add a database and got carried away) I don't think that's such a good idea. I've googled and found this:http://msdn2.microsoft.com/en-us/library/1ee8zw5t(VS.80).aspx which helpfully states:----- To remove a solution item In Solution Explorer, select the item you want to remove. On the Edit menu, choose Remove. ----- which would be great, if only the Edit menu had a remove option. Any ideas?
View 2 Replies View Related