Is there anyway I could run an Audit trace on SQl Server which records SQL Server System Admin Login/Logout , failed login and machine names I don't want the trace window to show on screen however would like a file generated for later viewing. Also due to Firewall issues we have, We don't have SQL tools enabled to connect to that server.
View 2 RepliesHi,
Could anyone assist me with this issue, nothing has changed on the server except trying to restore a db from another sql server to the one with the error (SQL01 to SQL02)
SQL02 Server does not startup, i get this error:
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
Then I try to apply the -f parameter on service start up, and i get this error:
Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
Could anyone please advise me on some solution?
Much appriciated
Gino
Hi,
I've created a few audit trace sessions and each of them is producing files.
The procedure I used is listed below:
IF EXISTS (SELECT 1 FROM sysobjects WHERE [name] = 'sp_Turn_Audit_On' AND type = 'P')
DROP PROC sp_Turn_Audit_On
GO
CREATE proc sp_Turn_Audit_On
as
/************************************************** **/
/* Created by: SQL Profiler */
/* Date: 11/15/2006 05:16:40 PM */
/************************************************** **/
-- Create a Queue
declare @rc int
declare @TraceID int
declare @maxfilesize bigint
set @maxfilesize = 1024
exec @rc = sp_trace_create @TraceID output, 2, N'E:Program FilesMicrosoft SQL ServerMSSQLTraceAudit_Info.trc', @maxfilesize, NULL
if (@rc != 0) goto error
-- Client side File and Table cannot be scripted
-- Set the events
declare @on bit
set @on = 1
begin
exec sp_trace_setevent @TraceID, 14, 1, @on
exec sp_trace_setevent @TraceID, 14, 6, @on
exec sp_trace_setevent @TraceID, 14, 9, @on
exec sp_trace_setevent @TraceID, 14, 10, @on
exec sp_trace_setevent @TraceID, 14, 11, @on
exec sp_trace_setevent @TraceID, 14, 12, @on
exec sp_trace_setevent @TraceID, 14, 13, @on
exec sp_trace_setevent @TraceID, 14, 14, @on
exec sp_trace_setevent @TraceID, 14, 16, @on
exec sp_trace_setevent @TraceID, 14, 17, @on
exec sp_trace_setevent @TraceID, 14, 18, @on
exec sp_trace_setevent @TraceID, 15, 1, @on
exec sp_trace_setevent @TraceID, 15, 6, @on
exec sp_trace_setevent @TraceID, 15, 9, @on
exec sp_trace_setevent @TraceID, 15, 10, @on
exec sp_trace_setevent @TraceID, 15, 11, @on
exec sp_trace_setevent @TraceID, 15, 12, @on
exec sp_trace_setevent @TraceID, 15, 13, @on
exec sp_trace_setevent @TraceID, 15, 14, @on
exec sp_trace_setevent @TraceID, 15, 16, @on
exec sp_trace_setevent @TraceID, 15, 17, @on
exec sp_trace_setevent @TraceID, 15, 18, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 6, @on
exec sp_trace_setevent @TraceID, 20, 9, @on
exec sp_trace_setevent @TraceID, 20, 10, @on
exec sp_trace_setevent @TraceID, 20, 11, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 13, @on
exec sp_trace_setevent @TraceID, 20, 14, @on
exec sp_trace_setevent @TraceID, 20, 16, @on
exec sp_trace_setevent @TraceID, 20, 17, @on
exec sp_trace_setevent @TraceID, 20, 18, @on
exec sp_trace_setevent @TraceID, 37, 1, @on
exec sp_trace_setevent @TraceID, 37, 6, @on
exec sp_trace_setevent @TraceID, 37, 9, @on
exec sp_trace_setevent @TraceID, 37, 10, @on
exec sp_trace_setevent @TraceID, 37, 11, @on
exec sp_trace_setevent @TraceID, 37, 12, @on
exec sp_trace_setevent @TraceID, 37, 13, @on
exec sp_trace_setevent @TraceID, 37, 14, @on
exec sp_trace_setevent @TraceID, 37, 16, @on
exec sp_trace_setevent @TraceID, 37, 17, @on
exec sp_trace_setevent @TraceID, 37, 18, @on
exec sp_trace_setevent @TraceID, 46, 1, @on
exec sp_trace_setevent @TraceID, 46, 6, @on
exec sp_trace_setevent @TraceID, 46, 9, @on
exec sp_trace_setevent @TraceID, 46, 10, @on
exec sp_trace_setevent @TraceID, 46, 11, @on
exec sp_trace_setevent @TraceID, 46, 12, @on
exec sp_trace_setevent @TraceID, 46, 13, @on
exec sp_trace_setevent @TraceID, 46, 14, @on
exec sp_trace_setevent @TraceID, 46, 16, @on
exec sp_trace_setevent @TraceID, 46, 17, @on
exec sp_trace_setevent @TraceID, 46, 18, @on
exec sp_trace_setevent @TraceID, 47, 1, @on
exec sp_trace_setevent @TraceID, 47, 6, @on
exec sp_trace_setevent @TraceID, 47, 9, @on
exec sp_trace_setevent @TraceID, 47, 10, @on
exec sp_trace_setevent @TraceID, 47, 11, @on
exec sp_trace_setevent @TraceID, 47, 12, @on
exec sp_trace_setevent @TraceID, 47, 13, @on
exec sp_trace_setevent @TraceID, 47, 14, @on
exec sp_trace_setevent @TraceID, 47, 16, @on
exec sp_trace_setevent @TraceID, 47, 17, @on
exec sp_trace_setevent @TraceID, 47, 18, @on
exec sp_trace_setevent @TraceID, 104, 1, @on
exec sp_trace_setevent @TraceID, 104, 6, @on
exec sp_trace_setevent @TraceID, 104, 9, @on
exec sp_trace_setevent @TraceID, 104, 10, @on
exec sp_trace_setevent @TraceID, 104, 11, @on
exec sp_trace_setevent @TraceID, 104, 12, @on
exec sp_trace_setevent @TraceID, 104, 13, @on
exec sp_trace_setevent @TraceID, 104, 14, @on
exec sp_trace_setevent @TraceID, 104, 16, @on
exec sp_trace_setevent @TraceID, 104, 17, @on
exec sp_trace_setevent @TraceID, 104, 18, @on
exec sp_trace_setevent @TraceID, 107, 1, @on
exec sp_trace_setevent @TraceID, 107, 6, @on
exec sp_trace_setevent @TraceID, 107, 9, @on
exec sp_trace_setevent @TraceID, 107, 10, @on
exec sp_trace_setevent @TraceID, 107, 11, @on
exec sp_trace_setevent @TraceID, 107, 12, @on
exec sp_trace_setevent @TraceID, 107, 13, @on
exec sp_trace_setevent @TraceID, 107, 14, @on
exec sp_trace_setevent @TraceID, 107, 16, @on
exec sp_trace_setevent @TraceID, 107, 17, @on
exec sp_trace_setevent @TraceID, 107, 18, @on
exec sp_trace_setevent @TraceID, 109, 1, @on
exec sp_trace_setevent @TraceID, 109, 6, @on
exec sp_trace_setevent @TraceID, 109, 9, @on
exec sp_trace_setevent @TraceID, 109, 10, @on
exec sp_trace_setevent @TraceID, 109, 11, @on
exec sp_trace_setevent @TraceID, 109, 12, @on
exec sp_trace_setevent @TraceID, 109, 13, @on
exec sp_trace_setevent @TraceID, 109, 14, @on
exec sp_trace_setevent @TraceID, 109, 16, @on
exec sp_trace_setevent @TraceID, 109, 17, @on
exec sp_trace_setevent @TraceID, 109, 18, @on
exec sp_trace_setevent @TraceID, 110, 1, @on
exec sp_trace_setevent @TraceID, 110, 6, @on
exec sp_trace_setevent @TraceID, 110, 9, @on
exec sp_trace_setevent @TraceID, 110, 10, @on
exec sp_trace_setevent @TraceID, 110, 11, @on
exec sp_trace_setevent @TraceID, 110, 12, @on
exec sp_trace_setevent @TraceID, 110, 13, @on
exec sp_trace_setevent @TraceID, 110, 14, @on
exec sp_trace_setevent @TraceID, 110, 16, @on
exec sp_trace_setevent @TraceID, 110, 17, @on
exec sp_trace_setevent @TraceID, 110, 18, @on
exec sp_trace_setevent @TraceID, 115, 1, @on
exec sp_trace_setevent @TraceID, 115, 6, @on
exec sp_trace_setevent @TraceID, 115, 9, @on
exec sp_trace_setevent @TraceID, 115, 10, @on
exec sp_trace_setevent @TraceID, 115, 11, @on
exec sp_trace_setevent @TraceID, 115, 12, @on
exec sp_trace_setevent @TraceID, 115, 13, @on
exec sp_trace_setevent @TraceID, 115, 14, @on
exec sp_trace_setevent @TraceID, 115, 16, @on
exec sp_trace_setevent @TraceID, 115, 17, @on
exec sp_trace_setevent @TraceID, 115, 18, @on
-- Set the Filters
declare @intfilter int
declare @bigintfilter bigint
exec sp_trace_setfilter @TraceID, 10, 0, 7, N'SQL Profiler'
-- Set the trace status to start
exec sp_trace_setstatus @TraceID, 1
-- display trace id for future references
select TraceID=@TraceID
goto noCursor
error:
select ErrorCode=@rc
noCursor:
return
end
Unfortunately, I didn't mention the @stoptime for each of the trace sessions and now I'm unable to delete the trace files. Is there any select statement that will be useful in finding the @traceid for these auditting sessions? Also, how am I able to stop the sessions without stopping the related services?
Thank you in advance.
Best regards,
Alla
Somehow someone turned on a audit on the sql server and it is filling up our hard drive and shutting down sql server eventually. Been trying to google how to shut this audit off but coming up with no via soolution yet. how can I turn this trace off. Each fiel says AuditTrace and date and they happen every other minute. I went into the sql profiler and can pull up the files but how to shut the trace off, it does not say.
View 9 Replies View RelatedHow can i Trace Database Audit specification Enable and Disable. i want to maintain log for enable or disable database audit specification.
View 4 Replies View RelatedWhat is the easiest way to find out what objects a security login has mapped to it? Something that would show all the explicit grants a specific user has.
View 6 Replies View Relatedask2much writes "I am trying to write a script that will audit my sql servers looking for weaknesses etc. I need it to report things like users with NULL paswords, users with excessive acces rights, users with direct access to tables, etc. I need a query that will give me a list of all the users in the server, the last time they logged in, and the last time they changed their password. How can I accomplish this? also if any one has already created a script similar to the one I am trying to create, could I please take a look at it to get some ideas?
thank you,
FV."
I restarted the sql server after c2 audit was enabled and now i can not start the instance getting this error below. how do i bring the sql server up?
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
Is there a kind of log to trace the change on DB user, such as when the password/permission is changed, etc. If yes, how can i get this log; If no, is there a way to achieve this thing?
View 2 Replies View RelatedWith SQL Server 2005 there is an option to grant a person access to Profiler for tracing SQL. This is done with the "GRANT ALTER TRACE" statement. The statement has to be executed at server level i.e. the master database.
The user in question only has access to certain databases on that server. The security problem that arises is that with the Profiler rights active, he can see the sql commands that are executed on the databases he has no rights for. Those SQL commands are executed by others users.
How do I configure security rules so that the person in question can use Profiler, but can only see the SQL statements that are executed on the databases he has the rights for? TIA!
I have setup a Database Audit Specification as follows:
Audit Action Type: SELECT | Object Class: DATABASE | Object Name: SHOPDB | Principal Name: public
Now, when I perform a SELECT query with a bound parameter such as:
SELECT * FROM myTable WHERE name='queryname'
What I see through the Audit Logs is something like:
SELECT * FROM myTable WHERE name='@1'
I understand that it is by design that we cannot see these parameters throught Database Level Auditing. I would like to know whether it is possible to see these parameters by any other means using
(1) SQL Server Enterprise Edition,
(2) SQL Server Standard Edition, or
(3) by an external tool.
I am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies View RelatedI need to be able to run a SECURITY audit/report against my Report Servers. I want to be able to see which users have which rights in which folders, etc.
I cannot find any canned report for this (from MS or on Web)
I cannot find data in ReportServer dbase that I can read.
Has anyone done this? How?
I have made a server security audit and specify from database audit specification to audit "select" on a certain user and on a certain table. I logged in by this user and made the select statement..when i run this query
"select * from sys.fn_get_audit_file('d:Auditaudit1*',null,null)"
It return a value at which time the query has done
after 15 minutes i repeated the same action, i run the audit query and the same result is showed off on the panel.is it suppose to return a list of values by how many times this user has made the select statement on that table ? for example at 5:00 pm then 6:00 pm and so on
I need help...here is the problem.Last weekend, the servers in our datacenter where moved around. After thismove, and maybe coincidental, 1 server is performing very poor. Afterrunning a trace with SQL Profiler, I saw the problem which was laterconfirmed with another tool for SQL server performance monitoring. It seemsthat all connections to the SQL server (between 200 - 400) are doing a login/ logout for each command that they process. For example, the user'sconnection will login, perform a SELECT, and then logout. This is not a..NET application. The client software was not changed, it is still thesame. The vendor has said that it is not supposed to do that, it issupposed to use 1 connection that log's on in the morning and logs off atthe end of the day or whenever the user exits. 1 user may have severalconnections to the database.At times, the server is processing over 250 login / logouts (avgeraged for30 second period). Has anyone seen this problem? I have the server inAUDIT FAILUREs only. The server has become very unresponsive, things thattook 3 seconds now take over 15 seconds.Any ideas???
View 6 Replies View RelatedI am facing a problem of invisible data. I have developed a ASP based application in my local laguage and data is entered from 8 clients. Now I have found that in a particular table in the SQL Server very few data is not visible if I see from the SQL query analyzer. But if I go the application and try to enter the data again it gives a message that the data already exist and next time if i see it from query analyzer the data is displayed.
Please help.
Bidyut Rn. Gohain
Hey, everybody,
I need your help on figuring out what is this invisible character in one of my data column.
The file is from IBM DB2 as text. I am comparing the data with the one in SQL server. There is one white space at the end of the column I couldn't get rid off.
The text strings from both side look idential except the DB2 one has a "space" at the end.
The len() show it's 13, while the sql one is 12. However, the rtrim()/ltrim() did not get rid of it.
This column is at the end of the row. So it could be CR or LF.
To use padindex or stuff functions, I need to know what is this stuff.
Talking about working hard for "NOTHING".
Thanks!
I am not sure why when the packages are run, the components dissapear. The only thing I see is the result in the output.
So there is no visual on the tabs.
Thanks
Recently found a situation which I can not figure out the cause. Wish somebody can help me here.
The scenario is as follows:
Server: SQL 7.0 with SP2
login name: DBA, standard SQL login, member of sysadmins
DB Name: TEST
DBA is the owner of database TEST and a member of db_owners in the database. Using EM, if you look at Users in TEST database, the only entry you can find is DBA where both Names (user name Login Name) are the same: DBA. There's no entry for user dbo. (from BOL, dbo can not be deleted)
Run sp_helpuser gives out two rows.
user login name
dbo NULL
DBA DBA
I don't know what happened to this machine before. Any clue about the possible cause is highly appreciated.
Hong
I am trying to locate the "My Reports" folder on the SSRS site, but I dont think I am able to see it. I am an admin on the box with Browser, Content Manager, My Reports roles.
I also tried creating the folder manually and it says the folder exists but I cant see it.
I have also checked on the "Site Settings" and checked the box "Enable My Reports". What else am I missing here?
Thanks,
sj
Hi,
Can I create invisible table in SQL Server 2005?
Access(all versions) has this option if you add Usys_TableName.
The table will be invisible, but you can get data from it
Mark
When defaulted to Visible or Invisible, +/- displays correctly. But when using the Expression, + is always showing as the default even when a group is expanded. Is this expected? TIA.
Publisher: SQL Server 2000 SP4
Subscriber: SQL Server 2005 Mobile Edition
Sometimes, after a failed merge replication(due to communication error) some rows on the subscriber became invisible for the publisher.
I've reproduced a case:
[START Short Version]
All rows inserted between a comm failed sync and a fine sync became invisible.
This seems to be caused because the subscriber keeps generating rows with the same generation number and the publisher doesn't look for this generation anymore.
[END Short Version]
[START Detailed case]
STEP 0: INITIAL STATE
Publisher
Orders Table
EMPTY
Subscriber
NO DATABASE
STEP 1: After FIRST SYNC and INSERTING 2 Orders
Publisher
Orders Table
EMPTY
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC000001 4 4 81000002 4 4 81
STEP 2: After SECOND SYNC
Publisher
Orders Table
OrderId
000001
000002
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
STEP 3: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
STEP 4: After THIRD SYNC (with comm error)
Error: [NativeError:28037][HRESULT:-2147012889]->[A request to send data to the computer running IIS has failed. For more information, see HRESULT.]
When: Error happens provoked after sending from Subscriber to Publisher but before ending syn process.
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
Note: Publisher has the row but subscriber keeps the state in 81.
STEP 5: INSERT ANOTHER ORDER (BEFORE A GOOD SYNC)
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Orders 000003 and 000004 have the same system info
STEP 6: After FOURTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Even with a fine merge process Publisher didn't get the 000004 row and the Subscriber didn't update the __sysMC
STEP 7: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000005 8 8 81
STEP 8: After FIFTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000002 8 8 80
Note: Data from generation 8 merge correctly, but data from generation 6 keeps invisible to publisher.
STEP 9: DUMMY UPDATE ON GEN 6 ROWS
Action: I made a non relevant update to force the Subscriber update the generation.
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 10 81
000004 6 10 81
000005 8 8 80
Note: sysCG get its value updated correctly.
STEP 10: After SIXTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000004
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 80
000004 6 6 80
000002 8 8 80
Note: Data merges correctly.
[END Detailed case]
I could code a system that checks all the publication tables and updates all the last generation rows in case of communication error but i would really like to avoid doing it.
I don't know if I'm missing something or if this is a bug or a known issue.
This is a big problem for me because communication errors on cellular phone based connection are quite common and users keep working even if there's an error.
Any comment will be appreciated.
I have a table which visibility can be toggled by a text box. By default it is invisible. After it is made visible, clicking a sortable column header makes the table invisible. Does this mean sorting makes the table go back to its default visibility?
Hi, I have 3 report parameters.
If a user selects 'value1' from the first parameter list then parameter list 2 & 3 should be open for the user to make their selection. BUT if the user selects 'value2' from parameter 1 then only parameter list 2 should be open and parameter list 3 invisible. Is this possible??
Hi,
Do you know why when I run my ssis packages in the dev machine, the diagrams are not visible during run time.
I can design the package but not sure why when I start the package, the diagrams in the control flow can not be viewed.
Please note that if I do this on the server, I can see the diagrams during run time.
Thanks
HI
I have the following scenario in my report.
-The data is displayed in a table
-The table groups by one field
-Each table row calls a subreport
-There is about 6 paramaters in the report
-The last paramater of the list of paramters is a multivalue paramater and based on what is selected in the list the corresponding subreport must be shown.
-So i use a custom vbscript funtion to determine if a specific value was selected or not.
This functionality is working fine.
My problem is if the user does not select all the values in the multi select then i want to make the row invisble
and remove the whitespace so that there is not a gap between the other subreports which is shown.
I can make the subreport invisible inside the row but there is still the white space which does not display very nicly.
How can i make the row invisible if the vbscript function that is called returns a false value?
Here is the funtion I call -> Code.InArray("ValueToSearchFor", Parameters!MultiValueDropDown.Value)
The Function returns a true or false.
Thanks.
I am joining on table A AND Table B ON the accountnumber field. The accountnumber on the tblB has some invisble characters at the end, ie "12344 ". The Table A does not have these invisble chars and is "12344".
Due to the extra spaces at the end, the join fails and does not find a match for that acctno. I have used ltrim(rtrim) hoping that will elimante the extra spaces and find a match.
Heres my qry:
select * from Tbla a
inner join tblb B
on ltrim(rtrim(ACCTNO))=ltrim(rtrim(ACCT))
How do I do this, so that it finds a match and returns the acctno.
Hi.
I found unpleasant issue within RS:
1. Imagine RS report with Table(with interactive sorting) whose visibility is toggled by Textbox:
2. After sorting the Table the Textbox is getting collapsed making the Table invisible. But the Table should remain visible.
Is this MS bug? Are there workarounds?
If my question is not understandable I can send simple *.rdl report with sample.
Thank you in advance for help.
I have been tring to get this one line figured out for a few days now.
'Job2 Info
Dim selectSQL2 As StringselectSQL2 = "SELECT * FROM '" & CompanyKey & "'" '<<-------HERE
Dim cmd2 As New SqlCommand(selectSQL2, con)
'Job2 Select
Try
con.Open()
reader = cmd2.ExecuteReader()
(I have the full code below.) So here is the problem, this code is not populating the datagrid. There is data in the table I am selecting from. When I log in, my CompanyKey value displays in the label as "21". When I take out the "CompanyKey" variable, and just type in 21, the grid is populated. It is confusing the heck out of me. I have tried it this way:
selectSQL2 = "SELECT * FROM [" & CompanyKey & "]"
-and this way:
selectSQL2 = "SELECT * FROM & CompanyKey
and all the other ways I could think of. I researched it and can just not get it to work any way I do it. Any suggestions? Full code below:
____________________________________
Imports System.DataImports System.Data.CommonImports System.Data.SqlClient
Partial Class _Default
Inherits System.Web.UI.PageProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")
'Job1(Info)Dim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL1 As StringselectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"
Dim cmd1 As New SqlCommand(selectSQL1, con) Dim reader As SqlDataReader
Dim CompanyKey
'Job1 Select
Try
con.Open()
reader = cmd1.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
Finally
con.Close()
End Try
'Job2 Info
Dim selectSQL2 As StringselectSQL2 = "SELECT * FROM [" & CompanyKey & "]"
Dim cmd2 As New SqlCommand(selectSQL2, con)
'Job2 Select
Try
con.Open()
reader = cmd2.ExecuteReader()
GridView1.DataSource = reader
GridView1.DataBind()
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
Finally
ReaderResults.Text = CompanyKey
con.Close()End TryEnd Sub
End Class
I have a couple reports that have parameters on them. Problem is when the report is printed, the parameters are not displayed.
To solve this, I have added the selected values to the header section of the report in a text box. I now want to find away to hide these values when the report is being viewed on screen but visible when printed. Any suggestions are welcome. Thanks
I use from sql server 2008. and c#
what is the best connectionstring?
I don't know if i use Persist Security Info and Integrated Security or not?
And if yes then their value must be true or false?
Hello there I have trying to figure out for days how to enable FullTrust for my Reporting Services security extension.
View 9 Replies View Related