Anyone Else Get No Body To Msgs After 10/28?
Oct 28, 1998Anyone else get no body to msgs after 10/28?
Why admin peoples?
ADVERTISEMENT
Our Forum Has Msgs &&> 8K
Jan 28, 2008Hi,
Our website provide users with a forum where they can enter messages. So, typically, a user would enter a message, click submit, and their message would be displayed on the forum.
The db that stores these msgs uses a varchar field. Now, we're adding a facility to convert any urls that are entered to links by adding 'a href' tags, so that when users see messages with urls, those urls appear as links, and they can click on them. The problem is that if a user enters a message of 8K chars, then we add 'a href' tags to any urls they have, that makes the message length > 8K, preventing us from storing it in our db. (Please note that we do need to add HTML tags for other reasons as well, not just to convert urls to links.)
We thought about adding 'a href' tags during pre-render, thus avoiding storing html in the db, but found that doing such string manipulations, while a user is waiting to see their post displayed on the forum, was expensive. Timing tests revealed that the time to render such pages more than doubled.
I have solved such problems previously by adding an extra field in the db to store any overflow data, that is, data that appears after the first 8K chars.
However, I learnt of sql server 2005's varchar(max) datatype, and 'am wondering if the best way to solve this problem would be to replace the varchar field with varchar(max).
Thanks in advance for any advice.
Shefali
Database Error Msgs
Jan 5, 2005Is there a reference that describes error messages?
On line Books does not seem to contain error listings. Still using sequel 7.
Maintenance Plans Error Msgs
Jun 29, 2007This error msgs persist after installing SP2 Hotfixes.
Any ideas?? Please see below:
TLE: Microsoft SQL Server Management Studio
------------------------------
Exception has been thrown by the target of an invocation. (mscorlib)
------------------------------
ADDITIONAL INFORMATION:
Creating an instance of the COM component with CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Creating an instance of the COM component with CLSID {E80FE1DB-D1AA-4D6B-BA7E-040D424A925C} from the IClassFactory failed due to the following error: c001f011. (Microsoft.SqlServer.ManagedDTS)
Service Broker:I Get An Error -8430 Msgs R Not Dilivering To Sys.transmision_queue
Jun 27, 2007Hi all,
I m newbie in service broker(ms sql server 2005). Somehow I have get tutorial on net and created service broker but now i m getting an error
<Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error">
<Code>-8430</Code>
<Description>The message body failed the configured validation.</Description>
</Error>
can anyone help me, what this error for?
and one more thing, i m trying this on my local system so should i create route and endpoint?
thanks in advance.
regard
Hammad
SSMS Express: Create TABLE && INSERT Data Into Table - Error Msgs 102 && 156
May 18, 2006Hi all,
I have SQL Server Management Studio Express (SSMS Express) and SQL Server 2005 Express (SS Express) installed in my Windows XP Pro PC that is on Microsoft Windows NT 4 LAN System. My Computer Administrator grants me the Administror Privilege to use my PC. I tried to use SQLQuery.sql (see the code below) to create a table "LabResults" and insert 20 data (values) into the table. I got Error Messages 102 and 156 when I did "Parse" or "Execute". This is my first time to apply the data type 'decimal' and the "VALUES" into the table. I do not know what is wrong with the 'decimal' and how to add the "VALUES": (1) Do I put the precision and scale of the decimal wrong? (2) Do I have to use "GO" after each "VALUES"? Please help and advise.
Thanks in advance,
Scott Chang
///////////--SQLQueryCroomLabData.sql--///////////////////////////
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
VALUES (2, 'MW2', 'Dichloroethene', 1.00)
VALUES (3, 'MW2', 'Trichloroethene', 20.00)
VALUES (4, 'MW2', 'Chloroform', 1.00)
VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
VALUES (6, 'MW6S', 'Acetone', 1.00)
VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
VALUES (9, 'MW6S', 'Chloroform', 1.00)
VALUES (10, 'MW6S', 'Methylene Chloride', 1.00
VALUES (11, 'MW7', 'Acetone', 1.00)
VALUES (12, 'MW7', 'Dichloroethene', 1.00)
VALUES (13, 'MW7', 'Trichloroethene', 1.00)
VALUES (14, 'MW7', 'Chloroform', 1.00)
VALUES (15, 'MW7', 'Methylene Chloride', 1.00
VALUES (16, 'TripBlank', 'Acetone', 1.00)
VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
VALUES (19, 'TripBlank', 'Chloroform', 0.76)
VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
//////////Parse///////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
////////////////Execute////////////////////
Msg 102, Level 15, State 1, Line 5
Incorrect syntax near '6.2'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'VALUES'.
Error Msgs In SQL6.5 - Error 17824, 232, 1608
Aug 16, 1999Had to rebuild SQL server and restored SMS databases ok. But the following msgs have appeared - any clues. All help appreciated.
99/08/16 16:38:30.75 ods Error : 17824, Severity: 10, State: 0
99/08/16 16:38:30.75 ods Unable to write to ListenOn connection '.pipesqlquery', loginname 'sa', hostname ''.
99/08/16 16:38:30.75 ods OS Error : 232, The pipe is being closed.
99/08/16 16:38:30.77 spid16 Error : 1608, Severity: 21, State: 2
99/08/16 16:38:30.77 spid16 A network error was encountered while sending results to the front end. Check the SQL Server errorlog for more information.
Gap Between Header And Body
Jul 17, 2007Hello every body,
I am facing a smal formatting issue. the issue i have 7 text boxes attached with each other in the header to show the week days ,i.e Sunday,Monday,Tuesday,Wednesday,Thursay,Friday and Saturday
In Body,i have a matrix which will extend to have 7 columns for the weekdays.
Every thing is fine,Except a small gap between header and footer where i want the 7 text boxes to act as column header names.
I tried with various options like removing the header and placing the text boxes in Body followed by the matrix. 2) placing the seven column headers in a dummy table and attaching that with matrix,
But i am unable to remove the gap between them. if any one of you had experienced the same problem or knows how to solve.it's really a great help
Thank you,
Can Any Body Tell Me What Wrong In My Sql Statement
Feb 22, 2007Hi,
can any body tell me what is wrong in my sql statement
SELECT title, price,
Budget = CASE price
WHEN price > 20.00 THEN 'Expensive'
WHEN price BETWEEN 10.00 AND 19.99 THEN 'Moderate'
WHEN price < 10.00 THEN 'Inexpensive'
ELSE 'Unknown'
END
FROM titles
it gives me this error
Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near '>'.
but when i use somthing like that i will works fine
SELECT
Budget
i am using sql server 2000
Can Any Body Tell My Why This Page Does´t Uppdate Into Sql
May 31, 2004can any body tell my why this page does´t uppdate into my sql
i get no error but it does´t uppdate the records :(
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
<html>
<head>
<title>Updating a Row of Data with Validation</title>
<style type="text/css">
#editPanel {
width:90%; padding:10; background:khaki;
border:thin outset}
#posted {
background:lightgreen; border:thin inset}
</style>
<script language="C#" runat="server">
/* *********** Data base config ************ */
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
/* *********** define DataBase Sql/Access data ************ */
string TheID;
protected void Page_Load ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT * FROM cars ORDER BY MessageDate desc",myConn);
myCmd.Connection = myConn;
TheID = Request.QueryString [ "TheID" ] ;
if ( !IsPostBack )
{
if ( TheID == null )
{
bindGrid ( );
loadPanel.Visible = true;
editPanel.Visible = false;
postPanel.Visible = false;
}
else
{
getMessage ( Request.QueryString [ "TheID" ] );
loadPanel.Visible = false;
editPanel.Visible = true;
postPanel.Visible = false;
}
}
else
{
loadPanel.Visible = false;
editPanel.Visible = false;
postPanel.Visible = true;
}
}
public void bindGrid ( )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ("SELECT TOP 10 * FROM cars",myConn);
SqlDataReader rdr;
myCmd.CommandText = "SELECT TOP 10 * FROM cars";
myConn.Open();
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close();
/*
myCmd.CommandText = "SELECT * FROM cars";
myConn.Open();
myGrid.DataSource=myCmd.ExecuteReader ( );
myGrid.DataSource = myCmd.ExecuteReader ( CommandBehavior.CloseConnection );
myGrid.DataBind ( );
*/
}
public void getMessage ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
editPanel.DataBind ( );
}
public void updateMessage ( object src, EventArgs e )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
myCmd.Connection = myConn;
SqlDataAdapter myAdapter = new SqlDataAdapter ("select * from cars where ID=" + TheID, myConn );
DataTable msgDetails = new DataTable ( );
myAdapter.Fill ( msgDetails );
DataRowView myRow = msgDetails.DefaultView [ 0 ] ;
SqlDataReader rdr;
if ( Page.IsValid )
{
myCmd.CommandText = "UPDATE cars SET Fastnumer=@Fastnumer, Tegund=@Tegund where id=" + TheID;
msgFastnumer.Value = myRow [ "Fastnumer" ].ToString ( );
msgTegund.Value = myRow [ "Tegund" ].ToString ( );
myCmd.Parameters.Add ( "@Fastnumer", SqlDbType.NVarChar ).Value = msgFastnumer.Value;
myCmd.Parameters.Add ( "@Tegund", SqlDbType.NVarChar ).Value = msgTegund.Value;
myConn.Open ( );
rdr = myCmd.ExecuteReader ( );
myGrid.DataSource = rdr;
myGrid.DataBind ( );
rdr.Close();
myConn.Close ( );
}
bindPostPanel ( TheID );
}
public void bindPostPanel ( String TheID )
{
string ServerName = "xxx"; // SQL server name
string Database = "xxx"; // SQL Database Name
string user = "xxx"; // SQL User name
string Pass = "xxx"; // SQL Password
SqlConnection myConn = new SqlConnection("server=" + ServerName + ";database=" + Database + ";UID=" + user + ";PWD=" + Pass + ";");
SqlCommand myCmd = new SqlCommand ( );
SqlDataReader rdr;
myCmd.CommandText = "SELECT * FROM cars WHERE Id='" + TheID + "'";
myCmd.Connection = myConn;
myConn.Open();
rdr = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataSource = rdr;
listDetails.DataBind ( );
rdr.Close();
myConn.Close();
/*
myConn.Open ( );
listDetails.DataSource = myCmd.ExecuteReader ( CommandBehavior.SingleRow );
listDetails.DataBind ( );
myConn.Dispose ( );
*/
}
</script>
</head>
<body>
<div class="header"><h3>ADO.NET Primer:
<span class="hilite">Editing an Existing Record</span></h3>
</div>
<hr size="1" width="90%">
<br>
<center>
<asp:panel id="loadPanel" runat="server">
<h5>Select a Record to Edit</h5>
<asp:datagrid id="myGrid" runat="server" width="90%" cellpadding="5" gridlines="vertical" bordercolor="black"
borderwidth="1" font-size="8pt" backcolor="ghostwhite" alternatingitemstyle-backcolor="lightgray"
autogeneratecolumns="false">
<headerstyle backcolor="darkslategray" forecolor="khaki" height="25" font-bold />
<columns>
<asp:boundcolumn headertext="Date" datafield="Innsett" dataformatstring="{0:d}" />
<asp:hyperlinkcolumn headertext="Fastnumer" datanavigateurlfield="id" datanavigateurlformatstring="aspxtest.aspx?TheID={0}"
datatextfield="Fastnumer" />
<asp:boundcolumn headertext="Tegund" datafield="Tegund" />
</columns>
</asp:datagrid>
<p align="center">Back to top</p>
</asp:panel>
<asp:panel id="editPanel" runat="server">
<h5>To save changes to the database, press Update.</h5>
<form runat="server">
<input type="hidden" id='msgDate' runat="server">
<table width="85%" cellspacing="1" cellpadding="3" border="0">
<col width="40%" align="right">
<col width="60%">
<tr>
<td>Fastnumer:</td>
<td><input id="msgFastnumer" runat="server">
<asp:requiredfieldvalidator runat="server" controltovalidate="msgFastnumer" errormessage="Sender's name cannot be blank. "
display="none" /></td>
</tr>
<tr>
<td>Your email address:</td>
<td><input id="msgEmail" runat="server">
<asp:regularexpressionvalidator runat="server" controltovalidate="msgEmail" validationexpression="^[w-]+@[w-]+.(com|net|org|edu|mil)$"
errormessage="Please enter a valid e-mail address. " display="none" /></td>
</tr>
<tr>
<td>Tegund:</td>
<td><input id="msgTegund" runat="server"></td>
</tr>
<tr>
<td>Your message:</td>
<td><textarea id="msgBody" rows="5" cols="35" runat="server"></textarea></td>
</tr>
</table>
<p>
<input type="submit" value="Update" runat="server" onServerClick="updateMessage">
<input type="reset" value="Cancel" onClick="self.location.replace ( 'aspxtest.aspx' ) "></p>
<asp:validationsummary runat="server" displaymode="SingleParagraph" showmessagebox="true" showsummary="false" />
</form>
</asp:panel>
<asp:panel id="postPanel" runat="server">
<h5>Thank you for editing your comments. This record has been updated.</h5>
<asp:datalist id="listDetails" width="85%" runat="server">
<itemtemplate>
<table id="posted" width="100%" cellspacing="1" cellpadding="5" border="0">
<col width="35%" align="right">
<tr>
<td>Date:</td>
<td><%# DataBinder.Eval ( Container.DataItem, "Innsett", "{0:d}" ) %></td>
</tr>
<tr>
<td>Name:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Fastnumer" ] %></td>
</tr>
<tr>
<td>Tegund:</td>
<td><%# ( ( IDataRecord ) Container.DataItem ) [ "Tegund" ] %></td>
</tr>
</table>
</itemtemplate>
</asp:datalist>
<p>
Back to Edit View
Select Another Record
</p>
</asp:panel>
</center>
<br>
<hr size="1" width="90%">
</body>
</html>
The Body Of The Report Disappeared
Feb 6, 2008
Hello,
I was modifying some standard reports of one planning program, by downloading .rdl file from report server and creating a new report project. I have done so many times.
Last weak in one of those new reports only header of the report was seen in the report server as I thought I had made some kind of mistake tried to look for it, and after some time the problem fixed itself and I blamed everything on one mixed up connection between the tables in the report, because after removing it the problem fixed itself, but now I think that was just a coincidence.
This weak after working fine for about a weak, 6 reports appeared as only headers and footers, they worked fine yesterday and no changes were made to the reports, but in the morning only the header is seen.
The reports that are affected are the 4 new ones, and 2 original ones, they are all dealing with the same date just different grouping and sorting.
Does anyone know how to fix this problem?
Darius
Body Values In Header And Header Values In Body
May 23, 2007Hi,
I want to display a value from db in the header section. I have read a couple of information that I should place the value in a in-visible text field an reference it in the header with the ReportItems. This works great with the first page but on the second page the header information are empty (I think because the Textfield is on Page 1 not Page 2)... So is there a way to accomplish that for all pages? Not only the first page....
My second one, hope you don't mind that I post it in the same thread, is:
My Report needs to display the total size of pages in the body. I did not realy found anything useful where I can retrieve from the total size of pages of my reports....
thanks for any help
f.
Page Number In Body
Aug 2, 2007how to get page number in body of report
View 9 Replies View RelatedXp_sendmail @subject Appears In Body
Nov 12, 2004My @subject in an xp_sendmail job is appearing in the email subject where it's supposed to, but also as the first line of the body. Does anyone know of a way to disable this behavior?
View 3 Replies View RelatedInsert A Variable Into HTML Body?
Oct 18, 2013I have created a .bat file for my sqlcmd
my sqlcmd includes a .sql file that builds up my email with a HTML body.
Is it possible to insert a variable (@customername) into the HTML body?
I am already using @maillist and select statement to create my customer email address's.
Placing A Web Link In An Email Body
Nov 28, 2007I'm generating emails using sp_send_dbmail. Everything works perfectly except for one thing. In the body of the email I need to show a link to a web page (eg http://myweb/login.aspx).
The problem is that the received email shows the "link" as plain text, ie it is not a clickable link. I've tried adding char(13) (and char(10) and both) after the link text but that doesn't help.
Is there a way to make the link text a real link when received by Outlook? (All recipients will be using Outlook if that helps).
Thanks,
John
Body BackgroundImage Not Displayed In Browser
Oct 5, 2006I have been trying to set up reports with a background image. The background displays correctly on the preview tab in Visual Studio, but is not visible when deployed to the report server and rendered in Internet Explorer.
However, if the report is printed, or exported to PDF or Excel, the background displays correctly.
It does not seem to make any difference if the image is external or embedded. Also, the problem only seems to affect the Body properties; a background image attached to a table, for example, seems to display correctly.
Has anybody else seen this behavior? I have not done extensive testing, but every report that I have tried seems to have the same problem. Is there a setting someplace that I am missing, or is this perhaps a bug in IE?
Why I Am Not Able To Change The Size Of Report Body
May 3, 2007Hi, all experts here,
Thanks a lot for your kind attention.
I am on the layout page, and click on the body, going to the body property dialogue, there is a size property there, I changed its width and height, but it is not changed at all? I mean once I save it, it is back to its orginal size? Why is that? Any advices for that?
Hope my question is clear.
Thanks a lot in advance for your help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Subscribe To Two Reports, One Body, One Attachment
Oct 10, 2007
I have a lengthy report and a summary viewof this report. I'dlike for the summary view to be sent out in a subscription as the message body and have the detailed report be sent out as a PDF attachment. I know you can't do this in the default subscription UI, but I was wondering if there was a programmatic way to make this happen?
Thanks,
-p
How Can I Shrink The Large Gap Between Report Hdg And Body?
Nov 20, 2007The gap between my report heading and the body seems unusually large, is there a way to shrink this down from what appears to be a default of over an inch? I dont see a way to slide the body upward in layout mode.
View 1 Replies View RelatedHow To Increase The Height Of The Body Above 160inch.
Sep 30, 2007
Hi,
I have requirement to generate a Report of having more than 30 pages. I am getting an error when I am adding an object to the body. The maximum height of the body is 160 in but my requirement is more than 160in.
I do not want to use Linked Reports, because my requirement is Report should be print on the single click.
Any help?
Regards,
Subhash
Footer Changes Based On Body Content. Possible?
Jan 16, 2008Tried to customize footer content by setting variable in code using VB setter/getter methods in the body of the report. Successfully able to change footer content by changing variable value via setter method in the header, but not from the body. I have report content in two table in the body of the report. I would like to change the footer when second table is displayed. Is this even possible?
View 4 Replies View RelatedInsert Trigger Not Getting Row Data For Email Body
Oct 18, 2007hello,
need help with a simple trigger i have been working on. the trigger automatically sends me an email out when a record is inserted, how ever i can't seem to get the row column data into the email. The part i do not understand is that I get the row column data information in the email if I update the row.
This is for 2005 SQL
Any direction would be greatly appreaciated
OneIDesigned
SSIS Send Email Html Body
Apr 4, 2008Hi, I need help please.
I want to send an HTML Email
I have an Htm file that i want to use as my email body on Send Mail Task
MessageSourceType: File Connection
MessageSource: Email.htm
It sends the email with the file in the body but not in HTML format
it outputs the HTML tags + data
eg: <span style="font-size:9.0pt;">Period: 2008.04</span>
I used the same file in a DTS package & that works fine.
Please Assist!
Regards
Mail Message Body With Data From Two Tables
Oct 27, 2013I need to set a trigger so that an email is generated when a row is inserted into the ABC_DB_OnlineFormsConfirm table. The message will include data not only from that table, but from a related table called ABC_DB_OnlineForms. The common field between the two is FormID. This is related to an online account application process where the user has the option of completing it in one session, or saving it and coming back at a later time. Once the user has completed the first screen and clicks continue, a record is written to ABC_DB_OnlineForms. At the very end, when he clicks “Save and Complete”, a row is written to the ABC_DB_OnlineForms table. I would like the body of the email to include three separate lines, as follows. The first two pieces of data come from the OnlineForms table and the third from OnlineFormsConfirm. The field names are userid, IRSBackup and ConfirmationCode.
UserID:
Subject to IRS Backup Withholding?:
Confirmation Code:
What I have below results in an email body that contains the confirmation code all by itself. If I switch @body=@MessageBody to @body=@UserID or @body=@Backup, it will report the correct single piece of data, but I have no idea how to get all three pieces at once as separate lines including the leading descriptor (UserID:, Confirmation Code, etc.).
CREATE TRIGGER SendEmail
ON [ABC].[dbo].[ABC_DB_OnlineFormsConfirm]
AFTER INSERT
AS
Begin
Declare @MessageBody varchar(100)
[code]...
Sp_send_cdosysmail - Parameter Inside Body Of Email
Jul 23, 2005I currently have a web form posting back to a SQL table using a StoredProcedure. Part of this SP is that it pulls data from another tableand inserts a new row into the registration table.I want to have a trigger on the registration table that will fire whenthe row is inserted which will use the sp_send_cdosysmail sproc to sendan e-mail to the user.However, I want to be able to include the value of one of the fieldswithin the BODY of the message. I can't find a way to includeparameters/variables within the Body of a message usingsp_send_cdosysmail and it's driving me nuts.Here's what I have in a sproc (not a trigger) that executessp_send_cdosysmail...I currently pass a parameter for the "To" e-mailaddress and that works fine._________________________________________________EXEC sp_send_cdosysmail'fromemailaddress@testcompany.com',@stremail, <--This is the Parameter passed for the "To" e-mail addy-->'Test Subject','Test Body,Additional TextAdditional Text<--THIS IS WHERE I WANT TO PUT THE PARAMETER-->Additional TextAdditional Text'__________________________________________________ _Is there any way to do this?The sp_send_cdosysmail I used is the standard MS one..Here it is forreference:Thanks for any help offered!ElliotCREATE PROCEDURE [dbo].[sp_send_cdosysmail]@From varchar(100) ,@To varchar(100) ,@Subject varchar(100)=" ",@Body varchar(4000)/************************************************** *******************This stored procedure takes the parameters and sends an e-mail.All the mail configurations are hard-coded in the stored procedure.Comments are added to the stored procedure where necessary.References to the CDOSYS objects are at the following MSDN Web site:http://msdn.microsoft.com/library/d...s_messaging.asp************************************************** *********************/ASDeclare @iMsg intDeclare @hr intDeclare @source varchar(255)Declare @description varchar(500)Declare @output varchar(1000)--************* Create the CDO.Message Object ************************EXEC @hr = sp_OACreate 'CDO.Message', @iMsg OUT--***************Configuring the Message Object ******************-- This is to configure a remote SMTP server.--http://msdn.microsoft.com/library/d...n_sendusing.aspEXEC @hr = sp_OASetProperty @iMsg,'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','1'-- This is to configure the Server Name or IP address.-- Replace MailServerName by the name or IP of your SMTP Server.EXEC @hr = sp_OASetProperty @iMsg,'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value','SMTPServer'-- Save the configurations to the message object.EXEC @hr = sp_OAMethod @iMsg, 'Configuration.Fields.Update', null-- Set the e-mail parameters.EXEC @hr = sp_OASetProperty @iMsg, 'To', @ToEXEC @hr = sp_OASetProperty @iMsg, 'From', @FromEXEC @hr = sp_OASetProperty @iMsg, 'Subject', @Subject-- If you are using HTML e-mail, use 'HTMLBody' instead of 'TextBody'.EXEC @hr = sp_OASetProperty @iMsg, 'TextBody', @BodyEXEC @hr = sp_OAMethod @iMsg, 'Send', NULL-- Sample error handling.IF @hr <>0select @hrBEGINEXEC @hr = sp_OAGetErrorInfo NULL, @source OUT, @description OUTIF @hr = 0BEGINSELECT @output = ' Source: ' + @sourcePRINT @outputSELECT @output = ' Description: ' + @descriptionPRINT @outputENDELSEBEGINPRINT ' sp_OAGetErrorInfo failed.'RETURNENDEND-- Do some error handling after each step if you have to.-- Clean up the objects created.EXEC @hr = sp_OADestroy @iMsgGO
View 2 Replies View RelatedHow To Set The Height Of The Report Body/table Dynamically
Feb 2, 2006Hi
I have a report of 8.5"(W) by 11"(H).The header and footer size are fixed.
The header size is 4.75 in and footer size is 2.375in.
In the report body I have a table where the data is dynamic.
The problem is when the data is small i mean like 2 or 3 columns it doesnt touch the footer .
If we have more than 10 columns or so it goes to the next page and even then it doesnt touch the footer beacuse the data stops there.
If we have like 4 columns or so in the table then it touches the footer.
I tried to replace the table with the list but I got the same problem there also.
I tried to place the table in a rectangle and it has the same problem.
I want the table to touch the footer no matter how much the data is .
Is there any work around for this problem?
I really appreciate your help and time
Thanks
Hobbs
Where Is My Body Background Color In The Report Manager?
Oct 29, 2006Hi,
Have you ever tried the following: change the background color of your body to any other color than white and deploy it. You will see that that body background color is still white.
I'm working on a dashboard which is black so I really need to get this working.
Any ideas?
Regards
Worf
Sending Email From An HTML Template As The Body
Aug 28, 2006We have a DTS package that sends smtp email from an ActiveX script task. The body of the emails are in template files that we read in and then replace values relating to the customer.
I am looking for suggestions of handling this process from an SSIS package. This is what our existing code does.
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main()
'********************************************************************************************
' Email results
'********************************************************************************************
Dim oRS, objMessage, fTemplate
Set fso = CreateObject("Scripting.FileSystemObject")
Set oRS =DTSGlobalVariables("ToBeNotified").Value
oRS.MoveFirst
Do While NOT oRS.EOF
Set objMessage = CreateObject("CDO.Message")
Set objMessage2 = CreateObject("CDO.Message")
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
'Name or IP of Remote SMTP Server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = DTSGlobalVariables("RemoteSMTPServer").Value
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = DTSGlobalVariables("RemoteSMTPServer").Value
'Server port (typically 25)
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
'Type of authentication, NONE, Basic (Base64 encoded), NTLM
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
'Your UserID on the SMTP server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = "CustomerService"
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = "CustomerService"
'Your password on the SMTP server
objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "cslogin"
objMessage2.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "cspassword"
objMessage.Configuration.Fields.Update
objMessage2.Configuration.Fields.Update
objMessage.Sender = DTSGlobalVariables("EmailFrom").Value
objMessage2.Sender = DTSGlobalVariables("EmailFrom").Value
objMessage.From = DTSGlobalVariables("EmailFrom").Value
objMessage2.From = DTSGlobalVariables("EmailFrom").Value
objMessage.To = oRS.Fields("ContactEmail").value
' objMessage.To = "me@ourmail.com"
objMessage2.To = DTSGlobalVariables("EmailBCC").Value
' objMessage2.To = "me@ourmail.com"
If oRS.Fields("Rejected").value = 1 Then
'Rejection Message
objMessage.Subject = "electronic request notification"
If oRS.Fields("ProductType").value = "Fixed" Then
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateRejectedFixed").Value)
Else
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateRejectedVariable").Value)
End If
Else
'Successful results
objMessage.Subject = "electronic confirmation #" + CSTR(oRS.Fields("ConfirmationId").value)
objMessage2.Subject = "Customer request for hard copy of contract"
'Add Terms and Conditons document
termDocument = DTSGlobalVariables("TermDocumentsRepository").Value + CSTR(oRS.Fields("TermDocument").Value) + ".pdf"
If fso.FileExists(termDocument) Then
objMessage.AddAttachment termDocument
objMessage2.AddAttachment termDocument
End If
If oRS.Fields("ProductType").value = "Fixed" Then
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateSuccessFixed").Value)
Else
Set htmlTextStream = fso.OpenTextFile (DTSGlobalVariables("EmailTemplateSuccessVariable").Value)
End If
End If
htmlText = htmlTextStream.ReadAll
htmlText = Replace( htmlText , "[OurLogo]" , DTSGlobalVariables("EmailLogo").Value)
htmlText = Replace( htmlText , "[CustomerName]" , oRS.Fields("ContactFirstName").value + " " + oRS.Fields("ContactLastName").value)
If oRS.Fields("Rejected").value = 0 Then
htmlText = Replace( htmlText , "[ConfirmNumber]" , oRS.Fields("ConfirmationId").value)
htmlText = Replace( htmlText , "[OrderDate]" , oRS.Fields("SalesDate").value)
htmlText = Replace( htmlText , "[ProductName]" , oRS.Fields("ProductType").value)
htmlText = Replace( htmlText , "[Months]" , oRS.Fields("TermMonths").value)
htmlText = Replace( htmlText , "[Price]" , oRS.Fields("SalesPrice").value)
htmlText = Replace( htmlText , "[Units]" , oRS.Fields("SalesPriceUnit").value)
htmlText = Replace( htmlText , "[StartDate]" , oRS.Fields("FlowStartDate").value)
htmlText = Replace( htmlText , "[AccountNumber]" , oRS.Fields("AccountNumber").value)
End If
objMessage.HTMLBody = htmlText
objMessage2.HTMLBody = htmlText
objMessage.Send
If oRS.Fields("SendHardCopy").value = True AND oRS.Fields("Rejected").value = 0 Then
' Attach Instructions for Hard Copy delivery
instructionDocument = DTSGlobalVariables("TermDocumentsRepository").Value + "Instructions.txt"
set file = fso.CreateTextFile(instructionDocument, true)
file.WriteLine("The customer has requested a hard copy of their contract to be sent to them.")
file.WriteLine("")
file.WriteLine("Instructions:")
file.WriteLine("1) Print the email")
file.WriteLine("2) Print the attached Terms & Conditions document")
file.WriteLine("3) Mail both items to the address below")
file.WriteLine("")
file.WriteLine("Customer Address:")
file.WriteLine(oRS.Fields("ContactFirstName").value + " " + oRS.Fields("ContactLastName").value)
file.WriteLine(oRS.Fields("BillingAddress1").value)
If oRS.Fields("BillingAddress2").value <> "" Then
file.WriteLine(oRS.Fields("BillingAddress2").value)
End If
file.WriteLine(oRS.Fields("BillingCity").value + ", " + oRS.Fields("BillingState").value + " " +oRS.Fields("BillingZip").value)
file.Close
set file=nothing
objMessage2.AddAttachment instructionDocument
fso.DeleteFile(instructionDocument)
objMessage2.Send
End If
set objMessage = nothing
set objMessage2 = nothing
oRS.MoveNext
Loop
Main = DTSTaskExecResult_Success
End Function
All suggestions are appreciated.
SK
How Can I Send Out Database Mail With Body From A MHT File, Thanks!
Apr 28, 2007The idea is user upload MHT file, I just send out email to others, with the content in the MHT as the conentent of the email.
thanks
Sending File Contents In The Body Of The Email With Xp_sendmail
Jul 23, 2005I would like to send the contents of a file using xp_sendmail howeverI do not want the file contents to be an attachment.I have no problem sending the file as an attachement.Can anybody give me an xp_sendmail example of how to do this.The results of a query can easily appear in the body of the email butall myattempts to include the contents of a file in the body of the emailhave not worked.TIA
View 1 Replies View RelatedXp_sendmail Problem - Body Message Breaking Onto New Line..
Sep 13, 2005Created a SP that uses system function XP_SENDMAIL. I wantto be able to send a HYPERLINK in the email. TheHYPERLINK is created dynamically and generally long in length (exceedsdefault width of 80 characters) and when rendered in the email is splitacross 2 lines. The problem is that when you click on the link itdisregards the part of the link that has been split onto the linebelow.Does anyone know a solution to this - how to extend the width of theemail to wider that 80 characters so that the link is not split over 2lines? I know that you can use the @width parameter when placing themessage in an attatchment, however I want the link to be placed in thebody of the email and not in an attachment.Any help is much appreciated..
View 2 Replies View RelatedRetrieving Values From A Subreport To Body Of Parent Report
Mar 7, 2007Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick