Hi!
i just wanted to know if stored procedures were microsoft-specific or if they apply to any standard and if so, which standard. i need it for my master's thesis.
thnax in advance,
juergen
when i am running a Stored Procedures, system always returns me error message below and Stored Procedures stops. please help
Microsoft OLE DB Provider for ODBC Drivers error
'80004005'
[Microsoft][ODBC SQL Server Driver] Received an unrecognized datatype 0 from
TDS data stream
sometime it returns error messge like, TDS Buffer Length Too Large
or
Unknown token received from SQL Server
or
Protocol error in TDS stream
or
Bad token from SQL Server: Datastream processing out of sync.
or
Invalid cursor state
or
TDS Buffer Link Too Large
or
Function sequence error
Many thanks, Please help, appreciated
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedHi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
I have created a stored procedure in the master database that can be run against any database on the server.
I call this procedure from a sql server agent job. In this job I specify the database I want the procedure to run against but it always seems to run against the master database (presumably because the procedure is in this database). I can't switch database inside the procedure so what can I do other than creating a copy of the procedure in every database?
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedGreetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
I have a question. I know its possible to create a dynamic query and do an exec @dynamicquery. Question: Is there a simpler way to update specific columns in a table at run time without doing if else for each column to determine which is null and which has a value because i'm running into a design dilemna on how to go about it.
FYI: All columns in the table design are set to null by default.
Thanks in advance,
Dimeji
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
I have a few questions about the following t-sql 2008 r2 sql code listed below that is calling a stored procedure:
DECLARE@return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C'
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
The sql listed above does execute the stored procedure called [dbo].[sproom] successfully and returns all the data all the rows from the stored procedure multiple times. However can you tell me the following:
1. How can I have the stored procedure return distinct rows?
2. I want the stored procedure to return selected columns. I tried using the OUTPUT parameter for some of the columns, but I got the error message, "Procedure or function spHomeroom has too many arguments specified.".
when I change the sql above to:
DECLARE @return_value int,
@endYear SMALLINT = 2014,
@CustomerID INT = '9999',
@Schedules CHAR(1) = N'C',
@CustName varchar(50)
EXEC [dbo].[sproom] @endYear
,@CustomerID
,@Schedules
,@CustName
That is when I get the error message.
A solution might be to change the stored procedure, but I would prefer not to since this is a generic stored procedure that I believe a lot of t-sqls and stored procedures will use.
I have a stored procedure that runs every 5 minutes. I have one block in the procedure that will only run if there are records in a temp table. In addition, I would like this block to run only if the current time is between 0 and 5 minutes past the hour or between 30 and 35 minutes past the hour.
Currently, my block looks like this:
IF OBJECT_ID('tempdb..#tmpClosedPOs') IS NOT NULL
BEGIN
I can get the current minutes of the current time by using:
Select DATEPART(MINUTE,GetDate())
I know that it should be simple, but I'm pretty new at Stored Procedures. How do I alter the IF statement to check for the time and only run the block if it's between the times I stated? I started to DECLARE @Minutes INT, but wasn't sure where to go from there.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
Hi All,
Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.
Any suggestions is appreciated
Thanks A lot in advance
e,g :
http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render
Hi there !
Thanks for taking the time to read this thread.
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-
Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)
TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")
Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")
Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")
I only expect this report to print out one page holding the previous values.
However, it ended up printing like this
----------------------------------------------------------
Table1
Column1
DetailRow1 1
DetailRow2
Column1
DetailRow1
DetailRow2 2000
Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658
------------------------------------------------------
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
Is this the correct expression ?
=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")
and it give me an error
The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Thanks!
Bernard
Hi,
I'm new to SQL server, still in the beginning stage of learning SQL Server. I'm here would like know, besides using the Connectivity from the DTS Designer to connect to different databases, is it possible to connect the database, i.e: Access via stored procedure? and how? Pls advise...
I'm have been trying to look for the solution via a lot of SQL Server site, but fail to get what I want.
What I'm trying to do is something like :
First connect to the Database and Query the data, after that insert it into another database....
i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
execute sp_executesql @sqlval
return @ret
end
I am very early on in developing a website to track issues with projects which is tied to a SQL database. I have my Projects Table, my Users Table, and am creating a third table to track issues. I'm wondering what is the best way to assign specific users to specific data/projects. The user should only be able to view & update the projects assigned to him. He should not be able to see other projects. What is the best way to assign projects/data to the users to make sure they are only viewing their data?
View 1 Replies View RelatedI am unable to send null values through the Microsoft JDBC 1.1 driver to a stored procedure. Please look at the thread already started on the SQL Server Transact SQL Forum at http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1772215&SiteID=1
View 1 Replies View Relatedhi
i need to use only one stored procedure and access many tablesso how write a stored procedure for that dohelp me looking forward for a reply to the earliest i am developing web page using asp.net using c# and sqlserver as backend
looking forward for a replygayathri
I am interested to know about stored procedures in Mssql .Can anyone please help me out.
Thanx in advance.
Hello I have two stored procedures
@ID INT
AS
SELECT (CASE WHEN NUM >= 10 THEN CAST(PAID AS FLOAT) / CAST(NUM AS FLOAT) * 100 WHEN NUM < 10 THEN 0 END) AS PER
FROM (SELECT (SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Player_id = @ID)) AS NUM,
(SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Transaction_value > 0) AND (D.Player_id = @ID)) AS PAID) AS X
and
@ID INT
AS
SELECT P.*,'/' + DBO.GETCHIPFOLDER(@ID) + '/' + ISNULL(P.PHOTO,'BLANK.GIF') AS PIC,ISNULL(
(SELECT SUM(TRANSACTION_VALUE)
FROM EVENT_DATA WHERE PLAYER_ID=@ID AND TRANSACTION_TYPE=1
GROUP BY PLAYER_ID),0) AS WINNINGS FROM PLAYERS P
undefined P
The first returns a percentage for player wins, the second gives me a photo and sums the player winnings
I would like to combine the results so I can get the percentage and wininngs in one query, in another matter all together I would like create a procedure like the first but instead of returning only one player, I would like to return the percentage for each player
Thanks in advance for any light you can shine on this.
I have a question about stored procedures, Is it better to use stored procedures even if I only use it once at my site? Or is it better to write the sql-part directly in the sqldatasource?
And am I forced to create two different stored procedures even if they are exactly the same except the "Where-part"?
Now I have around 40 stored procedures, and quite many of them looks the same except the where-part...
(Iam just a beginner with SQL)
Hello every one,
I m working in aspx 2.0 with sql server 2005, please tell me how can I create Stored Procedures for two or more tables not a single table(select,insert,update,delete please send me the queries which can help me in easy way I will very thankful to you
Thank you
I am learning to make a ASP web site and feel that if i can do it the harder way using some stored procedures instead of using multiple datasources on each page requiring that it might be better. So i am wondering what are these used for:DECLARE vs just entering "@param1 varchar(30)"When i use "DECLARE @rc int" i get the error "Incorrect syntax near DECLARE"How to return values to ASP page in Visual Studio 2005 How to use @@rowcount - doesn't seem to work for me?i tried using DECLARE @rc intSET @rc = @@rowcountWhen to use GO, BEGIN etcIf i want to use the variable only in the procedure, and not needed to be inputed, do i need to put it in the CREATE PROCEDURE (section)?Should i use my own stored procedures or VS2005 created ones using datasources? not really procedures but SQL, in SQL can i do like IF ELSE? if i use my own i cant use the Optimistic Concurrency right? and whats that?
View 1 Replies View Related