i have to calculate
power(2,32) in SQL Server Enterprise Manager.
here 32 is obtained through a series of calculations. no problem there. Error is in calculating power.
I am getting the foll error
Arithmetic overflow error for type int value = 4294927696.00000000
i tried convert(bigint,power(2,32)) but no use since conversion will anyway take place only after power is calculated which again gives the same error.
Hi all
Today I'm so incredibly annoyed.
I have a simple Table which has one Identity column plus an integer Column with Unique constraint and some varchar fields.When i change the value of that Unique Constraint Column , the value will change successfully But today i find a record (Just By Chance) that when i change the value of its filed i recieve the following Error: its filed has the value of 2519 and i wanted to update it to 2520 !!!
---------------------------
SQL Server Enterprise Manager
---------------------------
[Microsoft][ODBC SQL Server Driver][SQL Server]Arithmetic overflow error for type int, value = 6262227669.000000.
[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.
---------------------------
OK Help
---------------------------
As i said earlier i have no problem with other records , that's strange.
Could anyone help me Please?
Thanks in advance.
Kind Regards.
Hi allToday I'm so incredibly annoyed I have a simple Table which has one Identity column plus an integer Column with Unique constraint and some varchar fields.When i change the value of that Unique Constraint Column , the value will change successfully But today i find a record (Just By Chance) that when i change the value of its filed i recieve the following Error: its filed has the value of 2519 and i wanted to update it to 2520 !!!
---------------------------SQL Server Enterprise Manager---------------------------[Microsoft][ODBC SQL Server Driver][SQL Server]Arithmetic overflow error for type int, value = 6262227669.000000.
[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated. ---------------------------OK Help ---------------------------
As i said earlier i have no problem with other records , that's strange.
Could anyone help me Please?
Thanks in advance.Kind Regards.
l'm running this procedure and l get this error. All l'm trying to do is to get the size of the database and its objects and what the size should be so that its sized right. Is there a better way of doing this ?
CREATE PROCEDURE sp_totalsize as
SELECT o.name 'Table', SUM(c.length) 'Record size',
MAX (i.rows) '#of rows',
CONVERT (decimal (10, 4), SUM (c.length * i.rows)/(1024.00 * 1024.00)) 'Approx. size (MB)'
FROM sysobjects o, syscolumns c, sysindexes i
WHERE o.id = c.id
AND o.id = i.id
AND (i.indid = 1 or i.indid = 0)
AND o.type = 'U'
GROUP BY o.name
COMPUTE SUM (CONVERT (decimal (10,4), SUM (c.length * i.rows)/(1024.00 * 1024.00)))
GO
(17 row(s) affected)
Server: Msg 8115, Level 16, State 2, Procedure sp_totalsize, Line 3
Arithmetic overflow error converting expression to data type int.
Under certain circumstances I am getting the following error
"Arithmetic overflow error converting expression to data type int"
when running the following code:
SELECT Count(*), Sum(GrossWinAmount)
FROM LGSLog
WHERE
(CurrentDate >= '9/1/2004 8:00:00 AM') And (CurrentDate <= '9/27/2004 7:59:59 AM')
If I remove the "Sum(GrossWinAmount)" from the select, it works fine. I therefore believe that Sum is causing the error. Is there a version of Sum that works with larger variables, such as a BigInt? If not, is there some way to do the equivalent using larger numbers? I need to allow for the possibility of obtaining one month's summary, and sometimes the summary value is apparently too large for Sum to handle.
I've got this error message while generate the output with ASP:
"Microsoft OLE DB Provider for SQL Server (0x80004005)
Arithmetic overflow error converting expression to data type int."
it indicate that the error is related to this line:
"rc1.Movenext"
where rc1 is set as objconn.Execute(sql).
Not all outputs result like this, it happens when it has many relationships with other records, especially with those records which also have many relationships with other records.
Can anyone suggest a solution?
I've tried to increase the size of the database file, but it doesn't work.
This is the error in my query:
[Err] 22003 - [SQL Server] Arithmetic overflow error converting numeric to data type numeric.
If tried [%TAX] DECIMAL (10, 2) I have the correct output, but I need 4 decimal in my output.
Code:
MATNUMB-VER-EXENUMB-VER-RIC%TAX
a476427228.1515,17%
b9241314323.1515,50%
c7781510878.1413,98%
d7480019601.2626,20%
e877618297.099,45%
[Code] .....
I have the following code in a SP. The 2 if statements for the @@ Error I added only for testing as I suddenly started get the following error at the 1st @@Error statement
Msg 232, Level 16, State 2, Line
Arithmetic overflow error for type varchar, value = 10000.00000.
I cannot have this SP running minutes it must be done in seconds.
I have tried the folloiwng changes but then it takes to long.
-- set @new = 'x' + right('0000' + convert(varchar(5), round(rand() * 10000, 0)), 4)
-- set @new = 'x' + right('0000' + convert(varchar(4), right(round(rand() * 10000, 0),4)), 4)
declare @newvarchar(5),
@xstsint,
@new_retvarchar(5)
,@Cnt as int /* just for my testing */
set @cnt = 0 /* just for my testing */
[Code] ......
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
Hi all,In the beginning of this month I've build a website with a file-upload-control. When uploading a file, a record (filename, comment, datetime) gets written to a SQLExpress database, and in a gridview a list of the files is shown. On the 7th of September I uploaded some files to my website, and it worked fine. In the database, the datetime-record shows "07/09/2006 11:45". When I try to upload a file today, it gives me the following error: Error: Arithmetic overflow error converting expression to data type datetime. The statement has been terminated.While searching in google, i found it might have something to do with the language settings of my SQLExpress, I've tried changing this, but it didn't help. What I find weird is that it worked fine, and now it doesn't anymore. Here is my code of how I get the current date to put it into the database:1 SqlDataSource2.InsertParameters.Add("DateInput", DateTime.Now.ToString());
Am I doing something wrong, or am I searching for a solution in the wrong place? best regards, Dimitri
Hi,
I'm having this error with my page, user picks the date -using the AJAX Control Toolkit Calender with the format of ( dd/MM/yyyy ).
It looks like the application current format is MM/dd/yyyy, because it shows the error page if the day is greater than 12, like: 25/03/2007
What is wrong?
Here is the error page:
Server Error in '/' Application.
Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type datetime.The statement has been terminated.
Any help will be appreciated!
In my sql statement, I don't have any datatype as INT, when I run it, give me error as 'Arithmetic overflow error converting expression to data type int'.
example :
select column1, 2, 3 .....
from (select sum(float) as column1 , ....)
When I hop my cursor on top of column1, it shows (int,null)
The following codes give me the error "arithmetic overflow error converting expression to data type datetime" Unfortunately, the datatype of date of this database is still varchar(50)
select date from tbltransaction
where datepart(wk,convert(datetime,date,103)) = 15
I am attempting to setup a replication from SQL Server 2005 that will be read by SQL Server Compact Edition (beta). I'm having trouble getting the Publication Wizard to create the Publication. Sample table definition that I'm replicating:
USE dbPSMAssist_Development;
CREATE TABLE corporations (
id NUMERIC(19,0) IDENTITY(1964,1) NOT NULL PRIMARY KEY,
idWas NUMERIC(19,0) DEFAULT 0,
logIsActive BIT DEFAULT 1,
vchNmCorp VARCHAR(75) NOT NULL,
vchStrtAddr1 VARCHAR(60) NOT NULL,
vchNmCity VARCHAR(50) NOT NULL,
vchNmState VARCHAR(2) NOT NULL,
vchPostalCode VARCHAR(10) NOT NULL,
vchPhnPrimary VARCHAR(16) NOT NULL,
);
CREATE INDEX ix_corporations_nm ON corporations(vchNmCorp, id);
GO
When the wizard gets to the step where it is creating the publication, I get the following error message:
Arithmetic overflow error converting expression to data type bigint. Changed database context to 'dbPSMAssist_Development'. (Microsoft SQL Server, Error: 8115).
I can find no information on what this error is or why I am receiving the error. Any ideas on how to fix would be appreciated.
Thanks in advance ...
David L. Collison
Any day above ground is a good day.
this query is running fine in 2008 , but its not working in 2005 below is the error Msg 8115, Level 16, State 2, Line 1 Arithmetic overflow error converting expression to data type int.there is some problem in converting date in cte
with a
as
(
SELECT dbname = DB_NAME(database_id) ,
[DBSize] = CAST( ((SUM(ms.size)* 8) / 1024.0) AS DECIMAL(18,2) )
,
COALESCE(CONVERT(VARCHAR(12), MAX(bus.backup_finish_date), 101),'01/01/1900') AS LastBackUpTime
FROM sys.master_files ms
inner join msdb.dbo.backupset bus ON bus.database_name = DB_NAME()
[code]....
I thought I'd post this quick problem and answer, as I couldn't find the answer when searching for it.
I tried to call a stored procedure on SQL Server 2000 using the System.Data.SqlClient objects, and was not expecting any unusual issues. However when I came to call the Fill method I received the error "Arithmetic overflow error converting expression to data type int."
My first checks were the obvious ones of verifying that I'd provided all the correct datatypes and had no unexpected null values, but I found nothing out of order. The problem turns out to be a difference on the maximum values for integers between C# and SQL Server 2000. Previously having hit issues with SQL Server integers requiring Long Integer types in VB6, I was aware that these are 32-bit integers, so I was passing in Int32 variables. The problem was that Int32.MaxValue is not a valid integer for SQL Server. Seeing as I was providing an abitrary upper value for records-per-page (to fetch all in one page), I was simply able to change this to Int16.MaxValue and will hit no further problems as this is also well beyond any expected range for this parameter.
If anyone can name off the top of their heads what value should be provided as a maximum integer for SQL Server 2000, this might be a useful addition, but otherwise I hope this spares others some hunting if they also experience this problem.
James Burton
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
Guys
I'm getting the above when trying to populate a variable. The values in question are :
@N = 21
@SumXY = -1303765191530058.2251000000
@SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right
When I try the following ie to populate a variable with that value I get the error -
SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
Any ideas ??
hi, can someone please tell me what this error is, i am trying to create a quiz engine but i keep getting this error when i try to save the results of me quiz in the results page. i have been following the tutorial from this website. Please can someone help me, thanks
Arithmetic overflow error converting expression to data type smalldatetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type smalldatetime.The statement has been terminated.Source Error:
Line 46: userQuizDataSource.InsertParameters.Add("UserName", User.Identity.Name)
Line 47:
Line 48: Dim rowsAffected As Integer = userQuizDataSource.Insert()
Line 49: If rowsAffected = 0 Then
Line 50: ' Let's just notify that the insertion didn't
I got the following error when running a SP:
Server: Msg 8115, Level 16, State 6, Line 1
Arithmetic overflow error converting nvarchar to data type numeric.
The statement has been terminated.
The stupid thing is, that there is no data conversion at all. It's an insert into SLQ server table where data is retrieved from an Oracle View (using ADO DB link). I got 4 other SP's, doing the same thing for resp 4 other tables, which works fine. Those :mad: SP won't work. I don't know why. Below I put the table structure, view structure and SP I used:
Table:
Contract_No varchar (20) NOT NULL
Registration_Date_Time datetime NOT NULL
AGC varchar (4) NOT NULL
Salesgroup varchar (4) NOT NULL
Group_ varchar (8) NOT NULL
Activity_Type varchar (4) NULL
Type char (1) NULL
Group_Description varchar (50) NULL
Stock_Um varchar (4) NULL
B_Qty numeric(11, 4) NULL
B_Cost numeric(23, 4) NULL
C_Qty numeric(11, 4) NULL
C_Cost numeric(24, 4) NULL
D_Qty numeric(11, 4) NULL
D_Cost numeric(24, 4) NULL
Oracele view:
CONTRACT_NO VARCHAR2(20)
AGC VARCHAR2(4)
SALESGROUP VARCHAR2(4)
GROUP_ VARCHAR2(8)
ACTIVITY_TYPE VARCHAR2(4)
TYPE CHAR(1)
GROUP_DESCRIPTION VARCHAR2(50)
STOCK_UM VARCHAR2(4)
B_QTY NUMBER
B_COST NUMBER
C_QTY NUMBER
C_COST NUMBER
D_QTY NUMBER
D_COST NUMBER
Stored procedure:
CREATE PROCEDURE mis_Upload_Contract_Kosten
@strType varchar(10),
@strDate varchar(19)
AS
declare @strInsert as varchar(1000);
declare @strSelect as varchar(1000);
declare @strWhere as varchar(1000);
declare @strSql as varchar(3019);
SET @strWhere = ''
SET @strInsert = 'INSERT C_Contract_Kosten (
Contract_No
, AGC
, Salesgroup
, Group_
, Activity_Type
, Type
, Group_Description
, Stock_Um
, B_Qty
, B_Cost
, C_Qty
, C_Cost
, D_Qty
, D_Cost
, Registration_Date_Time)'
SET @strSelect = ' SELECT gLCK.Contract_No
, gLCK.AGC
, gLCK.Salesgroup
, gLCK.Group_
, gLCK.Activity_Type
, gLCK.Type
, gLCK.Group_Description
, gLCK.Stock_Um
, gLCK.B_Qty
, gLCK.B_Cost
, gLCK.C_Qty
, gLCK.C_Cost
, gLCK.D_Qty
, gLCK.D_Cost
, ' + char(39) + @strDate + char(39) + '
FROM Glovia..LIVE.C_CONTRACT_KOSTEN as gLCK
WHERE gLCK.Contract_No NOT LIKE '' IND*''
AND NOT EXISTS
( SELECT vCC.Contract_No
FROM V_Contracts_Closed as vCC
WHERE vCC.Contract_No = gLCK.Contract_No)
AND EXISTS
( SELECT cc.Contract_No
FROM C_Contracten as cc
WHERE cc.Registration_Date_Time = ' + char(39) + @strDate + char(39) + '
AND cc.Contract_No = gLCK.Contract_No)'
IF @strType = 'closed'
BEGIN
SET @strWhere = ' AND NOT(gLCK.Contract_Close_Date IS NULL)'
END
IF @strType = 'open'
BEGIN
SET @strWhere = ' AND gLCK.Contract_Close_Date IS NULL'
END
SET @strSql = @strInsert + @strSelect + @strWhere
EXEC (@strSql)
GO
I am trying to run this query:
SELECT 'D', property.parcel_number, ROUND(.23 + property_char.value * .02731, 2) AS nwcharge
FROM
property INNER JOIN
property_char ON property.id = property_char.property_id INNER JOIN property_char AS pc ON property.id = pc.property_id INNER JOIN
prop_valuation ON property.id = prop_valuation.property_id INNER JOIN
val_component ON property.id = val_component.property_id INNER JOIN
val_component AS vc ON property.id = vc.property_id
but I am getting the error:
"Arithmetic overflow error converting varchar to data type numeric".
It seems to be cause by the line: ROUND(.23 + property_char.value * .02731, 2) AS nwcharge.
Please help.
Thanks
i have an sql query that goes like this:
select CategoryID & power(2,x) from CategoryDetails
where CategoryID can range upto 15 digits eg: 137652435487090
x is the result of a formulae and can range upto 2 digits eg:95
CategoryID is the current category ID.
Number resulting from the formulae is the subcategory ID of the current categoryID.
I am getting error Arithmetic overflow error for datatype bigint.
what datatype shd I use to resolve the error or is there any way out.
Dear gurus
I want to have this query for some calculation
SELECT DATEADD(day, 1, CONVERT(datetime, @ddate, 101)) AS Expr1
@ddate is a parameter which will be passed during runtime.
when i try this is in the query window i get arithmetic overflow error
Thanks and Regards
Arun
Hi,
Below query failed which executing in sql 2005 64Bit and large memory
select count(*) AS Buffered_Page_Count
,count(*) * 8192 / (1024 * 1024) as Buffer_Pool_MB
from sys.dm_os_buffer_descriptors
Msg 8115, Level 16, State 2, Line 4
Arithmetic overflow error converting expression to data type int.
but it work fine in my test server which running 2GB of ram with sql 2005
I get an arithmetic overflow error when trying to insert DateTime.Now() as a SmallDateTime. When I set up my table definition I entered SmallDateTime and the program automatically allowed a length of 4. Any suggestions?
View 6 Replies View RelatedI have two tables which have dates in varchar fields on both. I have to
join them to get the data . I wrote the following syntax in where clause. In
one of the fields includes time and the other does not. But the thing is, I
got the Arithmetic overflow occurred error message after '01/01/2000'. Isn't
it strange?
convert(varchar(30),convert(datetime,R.request_dat e),101)=convert(varchar(30
),convert(datetime,B.request_date),101)
We are getting an Arithmetic Overflow Error - 8115
The error is thrown when a formula is getting calculated through the sql query
create table #temp
(
A decimal(21,4),
B decimal(21,4),
C decimal(21,4)
)
Insert into #temp
values( 171577.3139, 3376774.0000,3760846.0000)
select (A)/(0.8770/(B/C)) from
(select avg(A) as A, avg(B) as B, avg(C) as C from #temp) a
On execution of the select statement the following error message is thrown.
Server: Msg 8115, Level 16, State 2, Line 1
Arithmetic overflow error converting expression to data type numeric.
Can any one help us with a resolution.
Note: This select is part of our stored procedure.This formula is dynamically generated in our code.
We will not in a position to use cast function. We tried trace flag (107) option also. But we dont know how to set it permanently. It is effective only in the respective session. When the stored procedure is called from the application, the trace flag option does not work.
Why can't I multiply a bit variable that is set to TRUE (1) with a value larger than 0 but smaller than 1 without getting an "Arithmetic overflow error"? I have solved the problem by declaring my bits as smallints when I fetch them from the database into a stored procedure and use them in calculations, but I still would like to know why it doesn't work. I'm using SQL Server 2005. DECLARE @bit AS bitSET @bit = 0SELECT 0.1 * @bit -- Gives 0 as expected
SET @bit = 1SELECT 1.1 * @bit -- Gives 1.10 as expected
SELECT 0 * @bit -- Gives 0 as expected
SELECT 0.1 * @bit -- Gives "Arithmetic overflow error converting tinyint to data type numeric."
Hey everyone,
I have two tables, one is a large table (v_userviews) containing a list of all the servers and various information about those servers. The other table (l_printers) contains printer information for those servers. I am working on a view to consolidate the printer information in l_printers with the other server information in v_userviews.
I've been trying to get outer joins to work but I am getting this error:
"Server: Msg 8115, Level 16, State 2, Line 2
Arithmetic overflow error converting expression to data type int.
Warning: Null value is eliminated by an aggregate or other SET operation."
Here is my select statement:
select u.propid, u.address,
SUM((CASE u.Tree WHEN 'tree1' then 1 ELSE 0 END)) AS One,
SUM((CASE u.Tree WHEN 'tree2' then 1 ELSE 0 END)) AS Two,
SUM((CASE u.Tree WHEN 'tree3' then 1 ELSE 0 END)) AS Three,
SUM((CASE u.Tree WHEN 'tree4' then 1 ELSE 0 END)) AS Four,
SUM((CASE u.Tree WHEN 'tree5' then 1 ELSE 0 END)) AS Five,
SUM((CASE u.Tree WHEN 'tree6' then 1 ELSE 0 END)) AS Six,
SUM((CASE u.Tree WHEN 'tree7' then 1 ELSE 0 END)) AS Seven,
SUM((CASE u.Tree WHEN 'tree8' then 1 ELSE 0 END)) AS Eight,
SUM((CASE u.Tree WHEN 'tree9' then 1 ELSE 0 END)) AS Nine,
SUM((CASE u.Tree WHEN 'tree10' then 1 ELSE 0 END)) AS Ten,
SUM((CASE u.Tree WHEN 'tree11' then 1 ELSE 0 END)) AS Eleven,
SUM((CASE u.Tree WHEN 'tree12' then 1 ELSE 0 END)) AS Twelve,
SUM((CASE u.Tree WHEN 'tree13' then 1 ELSE 0 END)) AS Thirteen,
SUM((CASE u.Tree WHEN 'tree14' then 1 ELSE 0 END)) AS Fourteen,
count(u.server) as totalservers,
sum(cast(left(u.totalspace,len(u.totalspace)-2) as int)) as totalspace,
sum(cast(left(u.totalusedspace,len(u.totalusedspac e)-2) as int)) as totalusedspace,
count(p.printer) as numprinters
from serverops.dbo.v_userviews u LEFT OUTER JOIN novell_twr.dbo.l_printers p ON u.propid = p.propid
where u.os='netware'and u.state in ('ny', 'nj', 'fl')
group by u.propid, u.address
the l_printers table is in this format:
Printers Server Propid
nvarchar nvarchar varchar
Thanks for all your help. :beer: