Hello, how can I use an array in a WHERE clause?
If I had an array say
string[] NamesArray = new string[] {"Tom", "***", "Harry"}
How would I do this:
string myquery = "SELET name, city, country FROM myTable WHERE name in NamesArray"
Thanks in advance,
Louis
I have a table that looks like this:
RecordId
PictureId
KeywordId
111
212
313
421
522
623
725
817
932
1044
I need to run a query where I pass in an unknown number of KeywordIds that returns the PictureId. The 'IN' clause will not work because if a KeyWordId gets passed into the Stored Procudure the PictureId must have a record with each KeyWordId being passed in. For example, lets say you need to see the result of all PictureIds that have both 1 and 2, the correct result set should only be PictureId 1 and PictureId 2.
Im going crazy trying to find a simple solution for this. Please advise.
How does one pass into a Stored Procedure an array of numbers to be used in an IN clause? If I pass "1,2" in a VARCHAR, the stored procedure sees only the first number (1 in this case).
I'm using VB and ADO.NET, but I don't know how to set up the stored procedure for an array. Is there a parsing function to do this?
CREATE PROCEDURE TestInClause( @TeamList VARCHAR)ASSELECT Name FROM Teams WHERE TeamID IN (@TeamList); /* sees only 1st number */GO
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?
I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....
I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.
Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View 3 Replies View RelatedI am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following.
When on SQL Server 2000 the following statement ran without issue:
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
GROUP BY TrackID
HAVING MAX(LegNum) = 1 AND
TrackID + 'x1' IN
(
SELECT
dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
)
Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time.
I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same?
UPDATE dbo.Track_ID
SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed
WHERE Processed = 0 AND LegNum = 1
AND TrackID IN
(
SELECT TrackID
FROM dbo.Track_ID
WHERE TrackID + 'x1' IN
(
SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID))
FROM dbo.Track_ID INNER JOIN dbo.transactions
ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id
GROUP BY dbo.Track_ID.TrackID
)
GROUP BY TrackID
HAVING MAX(LegNum) = 1
)
2 examples:
1) Rows ordered using textual id rather than numeric id
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id
Result set is ordered as: 1, 11, 2
I expect: 1,2,11
if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
2) SQL server reject query below with next message
Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.
Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id
Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.
It reproducible on
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
and
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
In both cases database collation is SQL_Latin1_General_CP1251_CS_AS
If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.
Could someone clarify - is it bug or expected behaviour?
how can i send array from asp.net to sql?
View 3 Replies View RelatedI am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
Hi, I am trying to do a loop while a list of array is assigned ('CHP,CNH,COW') ... I am using comma seperator to get each list value ... but, it donest really do what I am trying to do ... pls help!!! How do I loop through each value and do the rest ...??
=====================================
DECLARE @ABBR AS NVARCHAR(50)SET @ABBR = 'CHP,CNH,COW'
DECLARE @SEP AS NVARCHAR(5)SET @SEP = ','
WHILE patindex('%,' + @ABBR + ',%', @ABBR ) > 0 BEGIN
-- do the rest
END
I want to do a query on an SQL Server 2005 db and have the results returned into aarray or collection in vb.net... how do I do this? I know the basicconnection and stuff.. just not how to get the result to an array thanks!
View 1 Replies View RelatedHi All,
I have this code below:Dim a As Integer = 0 While a <= myArray.Length() Conn.Open() Dim UpdateCmd As New SqlClient.SqlCommand("Update email_addr SET category = 'Deleted' where HP = @hp", Conn) UpdateCmd.Parameters.Add("@hp", SqlDbType.VarChar, 50).Value = myArray(a) UpdateCmd.ExecuteNonQuery() a = a + 1 Conn.Close() End While
BUt, When I run it, I receive error "Prepared statement '(@hp varchar(50))Update email_addr SET category = 'Deleted' wher' expects parameter @hp, which was not supplied. "
DOes anyone have the solution???
Thanks....
Hi,
i m pretty new to this forum and c#.net
i m doin a project in c#.net
I have four values in my datarow array
for example
DataRow[] cmb;
cmb=dsResult.Tables[0].Select("Controls Like 'cmb%'");// Here i m getting four Rows
for(i=0;i<cmb.Length;i++)
{
cmb[i]=Session["cmb'+i].ToString().Trim()//Here i m getting error;Cannot implicitly convert type 'string' to 'System.Data.DataRow'
}
How to assign my session values to them.
I want to assign my value stored in the session variable to that array.Is there any way i can do it.Can i convert datarow array to string array! Please can any one help
me.
I have two CheckBoxList controls. One CheckBoxList is a group of area codes as they apply to our customers, and the second CheckBoxList is a group of categories of those customers. The code below works fine with either CheckBoxList as a standalone (this code applies to the Area Codes selection), but what I need is the VB code to combine the choices a user makes in both CheckBoxLists. Is this where parameterized SQL comes into play? Or can I/should I use an array statement to combine both CheckBoxList choices? Sometimes a user will select nothing in one CBL and a few choices in the other, or vice versa, or a handful of choices in both CBLs, so that they might want only customers in, say two area codes and then only the selected categories of those area codes. Need help on this one, thanks...Protected Sub btn_CustomerSearchCombine_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btn_CustomerSearchCombine.Click Dim ACSelections As Boolean = False Dim ACItem As ListItem For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSelections = True End If Next If ACSelections = True Then Dim ACSqlString As String ACSqlString = "SELECT Customers.CustomerID, Customers.CustomerName, Customers.CategoryID, Customers.EstHours, Customers.Locality, Categories.Category FROM Customers INNER JOIN Categories ON Customers.CategoryID = Categories.CategoryID WHERE " For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSqlString &= "Customers.AreaCodeID = '" & ACItem.Value & "' OR " End If Next ACSqlString = Left(ACSqlString, Len(ACSqlString) - 4) ACSqlString &= "ORDER By Customers.CustomerName" sql_CustomerSearchGrid.SelectCommand = ACSqlString End IfEnd Sub
View 7 Replies View RelatedHi All,
How can I read a query result set (which are of type VARCHAR) into an array? i.e the result set comprises of just one column and 5 rows and i want to save these into an array to easily extract each row whenever i want to. Hope I have conveyed my idea clearly.
Gayathri
I want to do something like the following but I get an error: Object reference not set to an instance of an object. SqlConnection sqlConnection = new SqlConnection("server=xxxxx"); SqlCommand [] cmd = new SqlCommand[3]; Object returnValue; cmd[0].CommandText = "DO QUERY"; cmd[1].CommandText = "DO QUERY"; cmd[2].CommandText = "DO QUERY"; cmd[3].CommandText = "DO QUERY"; } sqlConnection.Open();int i = 0;while(i<4){ cmd[i].CommandType = CommandType.Text; cmd[i].Connection = sqlConnection; cmd[i].ExecuteNonQuery(); returnValue[i] = cmd[i].ExecuteScalar();i++} sqlConnection.Close();How should I do the followingThanks
View 9 Replies View RelatedI have data which looks like below
actid labname
100 CKS
200 CKS;HDP;LAS
I need the data to be
actid labname
200 CKS
200 HDP
200 LAS
The ; is the seperator
For a reporting product I created a sp which created a temp table and then using my function below built. problem is the product won't allow me to create a temp table. With what I have below anyone have any creative ideas I could use. In-line sql, subquery views?
select enc_id,labcnt,order_name,date_due
reate FUNCTION fn_GET_ARRAY_VALUE(
@DELIMITER VARCHAR(100),
@STRING VARCHAR(1000),
@ARRAY_POSITION INT)
RETURNS VARCHAR(8000)
AS
BEGIN
DECLARE @CURRENT_POSITION INT
DECLARE @VALUE VARCHAR(8000)
SET @CURRENT_POSITION = 0
WHILE @CURRENT_POSITION<@ARRAY_POSITION
AND CHARINDEX(@DELIMITER,@STRING,0)>0
BEGIN
SET @STRING =
SUBSTRING(@STRING,
CHARINDEX(@DELIMITER, @STRING, 0)
+LEN(@DELIMITER),
LEN(@STRING)
-CHARINDEX(@DELIMITER, @STRING, 0)
+ LEN(@DELIMITER)
)
SET @CURRENT_POSITION = @CURRENT_POSITION + 1
END
IF CHARINDEX(@DELIMITER,@STRING,0)=0
SET @VALUE = @STRING
ELSE
SET @VALUE = SUBSTRING(@STRING, 0,
CHARINDEX(@DELIMITER, @STRING, 0)
)
RETURN(LTRIM(RTRIM(@VALUE)))
END
Hi,
Is it possible to have a column as array in SQL Server 2000- similar to Oracle's varray. If yes, how?
rgds,
Kishore
How would one implement an array in SQL Server ?
Specically, i'm parsing a field into the array, and doing operations on these elements.
Thanks.
Hi all,
My Issue is the next thing:
I have a table filled with contracts
I have Stoc that checks if contract has expired
If I start the Stoc I must give it the contractnumber with it like:
SP_expired 8
This works fine but now I want that the Stoc checks all the contracts by just starting the Stoc.
I don't really know how to do this, I have thinking about using an array.
But don't have an idea where to start....
Thnx in advance
Please excuse me if this is the wrong forum. I hope your combined genius will be able to point me in the right direction.
I have an ASP page that accepts any SQL query. I want to create a table based on the result set so the number of columns can grow/shrink. But I don't know how. Can anyone help me?
My ASP Code shows how I create a table with only 8 fields.
<%
Dim objConn
dim SQLstmt
Dim objRS
Dim SQLqry
Dim UID
Dim RecordArray
Dim I
UID = right(Request.ServerVariables("AUTH_USER"),8)
SQLqry = Request.Form("qry")
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.ConnectionString="Trusted_Connection=yes;driver=SQL Server;server=Server;database=db;"
objConn.Open
If SQLqry = "" then
Response.Write "Please Enter a SQL Query"
Else
Set objRS = objConn.Execute(SQLqry)
Response.Write "<H5 align = ""center"">" & sqlqry & "</H5>"
Response.Write "<Table align = ""center"" border = ""1"">"
For I = 0 To objRS.Fields.Count - 1
Response.Write "<TD><B>" & objRS(I).Name & "</B></TD>"
Next
Do while not objRS.EOF
RecordArray = objRS.GetRows(30)
For I = 0 To UBound(RecordArray,2)
Response.Write "<TR>"
Response.Write "<TD>" & RecordArray(0,I) & "</TD>"
Response.Write "<TD>" & RecordArray(1,I) & "</TD>"
Response.Write "<TD>" & RecordArray(2,I) & "</TD>"
Response.Write "<TD>" & RecordArray(3,I) & "</TD>"
Response.Write "<TD>" & RecordArray(4,I) & "</TD>"
Response.Write "<TD>" & RecordArray(5,I) & "</TD>"
Response.Write "<TD>" & RecordArray(6,I) & "</TD>"
Response.Write "<TD>" & RecordArray(7,I) & "</TD>"
Response.Write "</TR>"
Next
Loop
Response.Write "</TABLE>"
objRS.close
objConn.close
set objRS=nothing
set objConn=nothing
End if
%>
hi guys im having some problems with arrays as parameter
what i want to do is pass a array of comma separated values i.e 12,24,36 and use the in(@parameter) but it doesnt work
i've found some solutions, like
ALTER PROCEDURE [dbo].[GetLawyers] ( @LawyerTypeIDs VARCHAR(100)
AS
DECLARE @SQL VARCHAR(2000)
SET @SQL = 'SELECT * FROM [dbo].[TB_VALOR_BANCOS]
WHERE [PARCELAS] IN (' + @LawyerTypeIDs + ')'
EXECUTE (@SQL)
but in my case doesnt work.
here is a part of my code
SELECT * FROM (
SELECT *, ROW_NUMBER()
OVER (PARTITION BY cod_banco ORDER BY coeficiente asc) AS RecID FROM tb_valor_bancos
where
(1 = CASE WHEN @TABELA IS NULL THEN 1
ELSE CASE WHEN TABELA = @TABELA THEN 1
ELSE 0
END
END
)
AND (1 = CASE WHEN @PARCELAS IS NULL THEN 1
ELSE CASE WHEN PARCELAS in(@PARCELAS) THEN 1
ELSE 0
END
END
)
...
i know there is a way to pass the array into a table but it doesnt work too
thanks
hi,
how can i split text separated by semicolumn in different cells:
text1;text2;text3;
into
1 - text1
2 - text2
3 - text3
thank you
I have seen several examples explaining the fact that a tablecontaining a field for each day of the week is for the most part anarray. An specific example is where data representing worked hours isstored in a table.CREATE TABLE [hoursWorked] ([id] [int] NOT NULL ,[location_id] [tinyint] NOT NULL,[sunday] [int] NULL ,[monday] [int] NULL ,[tuesday] [int] NULL ,[wednesday] [int] NULL ,[thursday] [int] NULL ,[friday] [int] NULL ,[saturday] [int] NULL)I had to work with a table with a similar structure about 7 years agoand I remember that writing code against the table was pretty close toHell on earth.I am now looking at a table that is similar in nature - but different.CREATE TABLE [blah] ([concat_1_id] [int] NOT NULL ,[concat_2_id] [int] NOT NULL ,[code_1] [varchar] (30) NOT NULL ,[code_2] [varchar] (20) NULL ,[code_3] [varchar] (20) NULL ,[some_flg] [char] (1) NOT NULL) ON [PRIMARY]The value for code_2 and code_3 will be dependently null and they willrepresent similar data in both records (i.e. the value "abc" can existin both fields) . For example if code_2 contains data then code_3 willprobably not contain data.I do not think that this is an array. But with so many rows wherecode_2 and code_3 will be NULL something just does not feel right.I will appreciate your input.
View 1 Replies View RelatedHi all,
I have data like this :
POHDR;JAKARTA;St.1DTL;1. ;00248337;8996006855701 ;083;041;002; 7,812.50; 312,500.00; 284,091.00; 8,875.00
first row is the PO header and the second is the detail. This data was collected using Export Import Wizard from flatfile and put it in one column. I want to split the header and the detail into different table and map each column separated by ; to a proper field. For this work I should check every column separated by ; with CHARINDEX function but I have to write the TSQL as much as the count of ;. It would be better if we can use array to simplify the code.
Can we use array in Transact SQL ? since I have no clue referring to SQLBOL. Thanks in advance.
Best regards,
Hery
Hi. Does anyone know how to pass a 2 dimensional array into a stores procedure? I need to loop through it and insert it into a table.
Thanks!
I'm using SQL Server 2005 and have have a table similar to the following:
Name Week Role
Bob 1 Primary
Bob 2 Backup
Bob 3 Primary
Joe 1 Backup
Joe 2 Backup
Mike 1 Primary
Mike 2 Backup
Is there a t-SQL query that will combine the role and week into an array and return a table like:
Name Role
Bob Primary: 1, 3
Backup: 2
Joe Backup: 1, 2
Mike Primary: 1
Backup: 2
Is there any way to make a CLR stored procedure that accepts an array style set of data? I want to make a stored procedure that accepts to parameters of type int, and then one more that is an array of name/value pairs. Is it possible to do something like this?
Hi, I want to populate the array with a single column values from database(sqlserver 2000)Ex. name ageaaaa 23bbbb 43cccc 18 Now i want to populate the array with name field values. Please anyone guide me how to do this.Thanks in advanceBala
Using the SqlDataReader, I am retrieveing records from a SQL Server 2005 DB table. Since I am using the SqlDataReader to retrieve the records from the DB, I have to use the Read method of the SqlDataReader like this:Dim sqlReader As SqlDataReaderWhile(sqlReader.Read) Response.Write(sqlReader.GetValue(0) & "<br>") Response.Write(sqlReader.GetValue(1) & "<br>") Response.Write(sqlReader.GetValue(2) & "<br>")End WhileThe records retrieved can only be accessed inside the While loop. I want to access the records outside the While loop as well. Is there anyway by which I can do this, maybe by populating the recordset in an array variable & then using it outside the While loop?
View 3 Replies View Related