Array Params To Stored Procedures?
Jul 13, 2004
This is not obvious to me...
As far as i can tell, you cannot pass an array (or structured) parameter to a stored procedure...
Ok, this means when you have to store data for an item and its sub-items (e.g. a product and its - say- version specific infos) you cannot code all the logic into a single procedure. You need to code it into your DAL, where you first insert then loop to sub-insert...
Is this correct?
Is there any other way to approach the problem?
Thanks a lot. -julio
View 3 Replies
ADVERTISEMENT
Feb 17, 2005
How to do this ?
==============================
CREATE procedure dbo.AddTb2FromTb1
@Tb1No nvarchar(1000)
as
insert into Tb2 (*)
select * from Tb1
where Tb1 IN (@Tb1No) /* How to Passing an Array to a Stored Procedures ??? */
==============================
dbo.AddTb2FromTb1 'No001' is Work !
dbo.AddTb2FromTb1 'No001,No002,Bo003' is not Work !
View 3 Replies
View Related
Oct 4, 2001
I thought that I had read somewhere that SQL 2000 allowed you to pass an array into a stored procedure. I've tried to look up some additional information pertaining to this but I haven't found anything. Did I dream this or can you pass an array to a stored procedure with SQL 2000? If you can please give me some information on this or where I can find some.
Thanks!
View 2 Replies
View Related
Aug 17, 2000
Is there any array data type in SQL Server 7.0. I am using VB 6.0 with ADO 2.1. I am populating a MSFlexGrid with values that I pass to SQL Server one at a time and insert into the database. What I would like to do is pass the entire contents of the Grid at once to a stored procedure and let SQL do the processing so my routine is not going back and forth to the client. I did not find any documentation on any array data types in SQL. What is my best approach to this problem?
Thanks,
Dan Collins
View 6 Replies
View Related
Mar 25, 2008
I have a set of reports that run just fine with the default parameters (Country = US). The report returns data within 60 seconds. However, if I change the default parameters, say to Country = UK, the report will run and won't seem to stop. The user will be prompted every few minutes to relogin to the domain (which they are not prompted when they first run the report). On the server, the report is taking up 1 of the four CPU's and is using a huge amount of disk paging.
Here's the kicker. If I go in, change the default parameters to Country = UK and deploy the report, it will run in 60 seconds with the new default parameters. Now I try to run the report by changing the country = US and it locks up when it is executed.
Anybody run into something like this?
Rob
View 5 Replies
View Related
Mar 19, 2003
Can I use the result of a scalar function as the parameter for a stored procedure? ie
exec [dbo].[usp_insert_into_table]
@integer = [dbo].[uf_getAnIDfromName]('PLAYER')
where the @integer parameter expects an integer and the user function uf_getAnIDFromName returns an integer related to the 'PLAYER' name.
View 2 Replies
View Related
Jul 23, 2005
Hi all!Running the code below in SQL-analyzeer (or through dbExpress) results in NULL.As one might guess I would like the result to be 1. What is wrong? I.e, whywont the result of the SP come back to the caller?CREATE PROCEDURE test@val INTEGER OUTASSELECT @val = 1GODECLARE @val INTEGEREXEC test @valSELECT @val
View 1 Replies
View Related
Oct 27, 2005
Hi all,I'd like to put together a SQL statement that will take the name of astored procedure as a param, and return that SP's parameters.I'm writing a test application, and I'd like to wrte a generator tosave myself some time, but I can't seem to figure out how to get theparams from a SP. Any help would be appreciated.Thanks in advance,Craig
View 2 Replies
View Related
May 24, 2006
How does one pass into a Stored Procedure an array of numbers to be used in an IN clause? If I pass "1,2" in a VARCHAR, the stored procedure sees only the first number (1 in this case).
I'm using VB and ADO.NET, but I don't know how to set up the stored procedure for an array. Is there a parsing function to do this?
CREATE PROCEDURE TestInClause( @TeamList VARCHAR)ASSELECT Name FROM Teams WHERE TeamID IN (@TeamList); /* sees only 1st number */GO
View 2 Replies
View Related
Mar 20, 2006
All,
I have the following :
ALTER PROCEDURE [dbo].[sp_FindNameJon]
@NameName varchar(50)='',
@NameAddress varchar(50)='',
@NameCity varchar(50)='',
@NameState varchar(2)='',
@NameZip varchar(15)='',
@NamePhone varchar(25)='',
@NameTypeId int=0,
@BureauId int,
@Page int=1,
@Count int=100000
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @SqlString nvarchar(3000),@SelectClause nvarchar(1000), @FromClause nvarchar(1000),@WhereClause nvarchar(1000)
DECLARE @ParentSqlString nvarchar(4000)
DECLARE @Start int, @End int
INSERT into aaJonTemp values (@Page, 'here2', @NameCity);
And inside of aaJonTemp, I have the following :
NULL
here2
NULL
NULL
here2
NULL
How is this possible? If @Page or @NameCity is NULL, how come it doesn't default to a value in the stored proc?
Thx
jonpfl
View 1 Replies
View Related
Aug 7, 2007
I have a stored proc that I'm using to run a report. It works fine, but currently I'm using a parameter that is a single selection from a dropdown. I'd like to use multi select, but have not been able to get it to work.
In the data tab I'm currently using "text" for command type and :
Code Snippet
declare @sql nvarchar(2000)
set @sql = '
EXEC [Monitor] '' + @p_OfferStatus + '''
exec sp_executesql @sql, N'@p_OfferStatus VARCHAR(100)', @p_OfferStatus = @p_OfferStatus
when I run this in the data tab, it works fine, returning data, but when I try to preview it it tells me there are syntax errors. Anyone know the correct way to use multi selects with stored procs?
View 4 Replies
View Related
Sep 25, 2007
I have an SP like this (edited for brevity):
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[TESTING_SP]
@Username MediumText,
@Password MediumText,
@UserKey int OUTPUT,
@RoleKey int OUTPUT,
@UserGroupKey int OUTPUT,
AS
BEGIN
SELECT
@UserKey = UserKey
FROM UserProfile
WHERE Username = @UserName
AND [Password] = @Password
END
I want to execute this sp in Managment Studio (MS) and see what is being returned but I'm getting this error:
Msg 201, Level 16, State 4, Procedure TESTING_SP, Line 0
Procedure 'TESTING_SP' expects parameter '@UserKey', which was not supplied.
How do I set up the output parameters and then select the values in MS for testing purposes?
Thanks a ton for helping a noob.
View 2 Replies
View Related
Jul 23, 2005
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies
View Related
Jun 1, 2006
Can any one help me with a sample code, which can take an array of
elements as one of it's parameters and get the value inserted into a table in a stored procedure.
Thanks in advance
vnswathi.
View 5 Replies
View Related
Sep 30, 2006
Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
View 1 Replies
View Related
Apr 1, 2004
I want to pass and array of ids to a procedure for inserting i a relation table.
I found some examples in other posts, but had problems getting them to work.
I just want to pass a parameter with value like '1,45,89' to the procedure, then loop through it to insert the relations.
(I´m using sql server 2000), had some problem with examples with strpos then.
Any hints ?
peace.
View 2 Replies
View Related
Jul 22, 2004
How would I go about storing (1 column) database results in a Array?
And then how would I go about extracting the elements from the Array?
View 4 Replies
View Related
Apr 8, 2005
i doing an online shop project which have an shoppingcart and it stored database.
and i have the situation like this.
the products have properties such as size, color . and customers
can buy a product with particular size or color. and i have
the shopping cart table structure and data like following
Id(primary key) CartId
productId size
color quantity
1
1
1
S red
10
2
1
1
S black
2
3
1
1
S blue
3
4
1
1
M red
5
5
1
1
L
blue 2
all the data above is i image the customer may inputed. And my
problem is how to use an stored procedure to updata above record
when a customer buy the same product which is one of the product from
above(have same productId, size, color)
and i try to use the following code but it didn't work
<code>
create procedure shoppingcart_add_item
( @cartId int,
@productId int,
@size nvarchar(20),
@color nvarchar(20),
@quantity int
)
AS
DECLARE @countproduct
DECLARE @oldsize
DECLARE @oldcolor
select @countproduct=count(productId) FROM shoppingcart WHERE productId=@productId AND cartId=@cartId
select @oldsize=size,@oldcolor=color FROM shoppingcart WHERE productId=@productId
IF @CountItems > 0 and @oldsize = @size and @oldcolor = @color
UPDATE
ShoppingCart
SET
Quantity = (@Quantity + ShoppingCart.Quantity)
WHERE
ProductId = @ProductId
AND
CartId = @CartId
ELSE /* New entry for this Cart. Add a new record */
INSERT INTO ShoppingCart
(
CartId,
ProductId,
Quantity,
color,
size
)
VALUES
(
@CartId,
@ProductId,
@Quantity,
@size,
@color
)
</CODE>
and the result from this stored procedure is not what i want, what i
try to say is can i stored all the size and color in @oldsize and
@oldcolor array. then loop through the array to get the one i
want??????
somebody get any idea??? or don't know what i am talking about?
View 1 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
Aug 8, 2000
I just want to Know how to create an Array in a stored procedure. Please can you give the syntax and any Example.
View 1 Replies
View Related
Oct 13, 2000
In my front end, I have a procedure in which the operator selects multiple tickets. I have in mind to create a stored procedure which accepts its input parameter and plugs it into an IN() clause in an Update statement, something along these lines:
Update TicketInventory Set SalesID = 12345 Where TicketInventoryID IN( myInputParam );
Can I pass an array of Integers into a stored proc and have it work like this? Alternatively, I could pass a comma-delimited string containing the Integers. Could I plug that into the IN()? Or is there is yet another way to accomplish this?
TIA,
Arthur
View 1 Replies
View Related
Mar 9, 2006
Can you pass an array into a stored proc or do we have to use indiviual parameters.
If we can, any code exmaple woudl be great.
Cheers
Chris
View 4 Replies
View Related
Feb 14, 2008
how to pass array of values in stored procedure..
View 2 Replies
View Related
Nov 23, 2005
I have a table on the database with columns like the following:Name Date DataJoe 11/5/05 data1Joe 11/6/05 data2Bob 11/5/05 data3Bob 11/8/05 data4I want to retrieve all data from an array or list I pass in thatcontainsone row for each name and a date, like below.Name DateJoe 11/6/05Bob 11/7/05I want to retrieve all rows from the first table where Name is Joe andDate > 11/6/05 or where Name is Bob and Date is > 11/7/05. There couldbe an unlimited number of name/date combinations.Can anyone suggest a way to write a stored procedure to handle thisquery.Thanks,Rick
View 4 Replies
View Related
Jan 9, 2007
Dear All,
I am using sql2000, I want to know whether in stored procedure we can pass
array. Or is there any other solution to pass array of records
Please Guide Me
thanks
View 3 Replies
View Related
Jan 25, 2007
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
View 10 Replies
View Related
Jun 10, 2007
Well, I managed to write a Stored procedure that updates some records in the Northwind Database based on the ProductIDs passed to the SP as a list of strings. This is the Alter version of the SP:USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[gv_sp_UpdatePOs] Script Date: 06/10/2007 12:07:54 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[gv_sp_UpdatePOs]
(
@IDList varchar(500),
@ReorderLevel int,
@ProductName nvarchar(30)
)
AS
BEGIN
SET NOCOUNT ON
EXEC('Update dbo.Products
SET ReorderLevel = (' + @ReorderLevel + ') ,ProductName = (''' + @ProductName + ''')
WHERE ProductID IN (' + @IDList + ')')
END
----------------------
THis works fine inside Sql Server 2005 Query analyser.
But when I setup an aspx page with an objectDataSource inside the page attached to an xsd file where the Products table is located. When I try to add new query to the tableadapter inside the Products table and point to the stored procedure in the wizard I get this error: " the wizard detected the following problems when configuring TableAdapter query "Products" Details: Generated SELECT statement. Incorrect suntax near ')'.
Any help would be appreciated
And can someone convert it to support XML instead of list of strings. thanks.
View 3 Replies
View Related
Jun 14, 2006
Hello, I have a question on sql stored procedures.I have such a procedure, which returnes me rows with ID-s.Then in my asp.net page I make from that Id-s a string likeSELECT * FROM [eai.Documents] WHERE CategoryId=11 OR CategoryId=16 OR CategoryId=18.
My question is: Can I do the same in my stored procedure? Here is it:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[eai.GetSubCategoriesById]
(
@Id int
)
AS
declare @path varchar(100);
SELECT @path=Path FROM [eai.FileCategories] WHERE Id = @Id;
SELECT Id, ParentCategoryId, Name, NumActiveAds FROM [eai.FileCategories]
WHERE Path LIKE @Path + '%'
ORDER BY Path
Thank youArtashes
View 2 Replies
View Related
Apr 28, 2008
Hi there,
My requirement is to send more than one GUID to the stored procedure.
How can I do that? If you can give me an example that will be great.
Kind regards,
Ricky
View 2 Replies
View Related
Aug 19, 2014
I would like to write a store prodecure to return a month:
My output:
Wk1 = July
Wk2 = July
Wk3 = July
Wk4 = July
Wk5 = Aug
and so on..
then i create list of array like below:
The counter for insert the week one by one
DECLARE @TotalWeek INT, @counter INT
DECLARE @WeekNo varchar, @Month varchar
SET @WeekNo = '4,9,14,18,22,27,31,35,40,44,48,53'
--this is weekno,if less than 4, month is july, lf less than 9, month is august and so on
SET @TotalWeek = 53
SET @counter = 1
[Code] ....
View 8 Replies
View Related
Jan 31, 2008
how to pass array(query parameter) into stored procudure. with this array i need to retrive data,with another array i have to retrive another set of data.
eg: suppose @param1 contains chapter1,Chapter2,Chapter3,
@param2 contains unit1.1,unit2.1,unit2.2,unit3.1,unit3.6
how can i do in stored procedure
love all
View 1 Replies
View Related
May 4, 2006
hi there,
i need a procedure that works with C# e.g.:
using (SqlCommand cmd = GetCommand("Procedure_Name"))
{
//i=an array of integer values
cmd.Parameters.Add("@array", SqlDbType.????!?!???).Value = i;
cmd.ExecuteScalar();
}
i need to write a stored procedure that takes as input an array of integers (amongst other values)
this procedure must loop through every integer in the array and INSERT a new record into a table.
i have never used T-SQL before.
Many thanks
View 3 Replies
View Related
Jun 25, 2007
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
View 5 Replies
View Related
