Dear all,
I've a different problem while writing some script.
actually i need all the currency symbols and its ascii values.
i downloaded from one website, it is showing correctly in msword.
but i'm not getting the same thind in EDITPLUS.
can any one guide me in this regard please?
Vinod
Dear all,
I've a different problem while writing some script.
actually i need all the currency symbols and its ascii values.
i downloaded from one website, it is showing correctly in msword.
but i'm not getting the same thing in EDITPLUS.
can any one guide me in this regard please?
Vinod
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
People,
can I export data using BCP to ASCII file?
I'm looking for but I did not found...
Thanks
I want to know the individual character ascii code for "нолайн" .
when i try to get using select ascii('л') it's return code as 63 which is not correct (ascii code 63 is for "?").
how to get ascii code for this.
All, I have to automatically grap a dbf or ascii file from my hard drive and then insert that into an already existing database table. Does anyone know how to do this? The only thing I can find is to do it manually from enterprise manager, but I need to automate this.Thanks in advance!
View 1 Replies View RelatedI've got one SQL Server 7.0 table with a "Decsciption" Column of length 4000. The values in this column contains "End of Line" ASCII Character. The ASCII Value of this character is 10. I'm not able to remove this ASCII Character. I tried by using REPLACE function. But i could not remove that character.
Any thoughts are welcome,
Regards,
Santha.
Hello one and all,
I’m new to T-sql and need help understanding the CHAR() and ASCII functions.
I tried to run these commands to better understand them but I get the same results each time.
Here is the query with the char command
USE Northwind
SELECT FirstName + ' ' + LastName, + CHAR(13) + Address,
+ CHAR(13) + City, + Region
FROM Employees
WHERE EmployeeID = 1
Nancy Davolio
507 - 20th Ave. E.
Apt. 2A
Seattle WA
(1 row(s) affected)
Here is the same command without the char function.
USE Northwind
SELECT FirstName + ' ' + LastName, + address, + city, + region
from employees
where employeeID = 1
address city region
------------------------------- ------------------------------------------------------------ --------------- ---------------
Nancy Davolio 507 - 20th Ave. E.
Apt. 2A Seattle WA
(1 row(s) affected)
As you can see I get the same results back except for the column names being displayed.
Please help me understand this.
Thank you,
Eric Talley
I have an file I FTP onto the server using a FTP task in my DTS package. The problem I'm having is the FTP task downloads using binary format, whereas I need it to download using ascii format. Binary is causing characters in the file to change, and my import is failing.
Any idea on how to set it to download as ascii?
Hi
I am importing data from mainframe using DTS the problem is that I am getting some COMP fields from the mainframe these are compressed data fields that are used to reduce storage space on the main frame. Can some one please help me understand how we can use DTS to solve this problem that is decompress it before transferring to table in SQL server.
any code in scripting language to help decompress this datatype will be really appreciated.
Thanks
item custclass totalcustclass
-------------------------
06-5841 INST-CLINPRAC 1
06-5841 INST-MKT/MEDIA 2
06-5841 PROGRAM 1
06-5841 STANDARD 4
06-5845 STANDARD 1
AX-048 INST-MKT/MEDIA 4
KT-048 PROGRAM 2
KT-048 STANDARD 4
i want condition like if item is starting with number then totalcustclass whcih is count(*) remain same giving correct results...but if item startign with ascii character then totalcustclass r getting double so i have to /2..
i want results:
item custclass totalcustclass
-------------------------
06-5841 INST-CLINPRAC 1
06-5841 INST-MKT/MEDIA 2
06-5841 PROGRAM 1
06-5841 STANDARD 4
06-5845 STANDARD 1
AX-048 INST-MKT/MEDIA 2
KT-048 PROGRAM 1
KT-048 STANDARD 2
select
item, custclass,
case when item is <ascii> then count(custclass)/2
else count(custclass)
as totalcustclass
from itemcustclass
can anyone tell me what condition will come in case?
thanks for help.
I have data that comes from a legacy system. I can obtain the data in anASCII format. Currently I have created scripts in ACCESS to import the datainto tables.What I would like to do is create an automated import function in SQL.I am new to SQL, can anyone point me in the direction I should look to findout how I could perform this task?Using SQL 2005.ThanksMatt--Matt Campbellmattc (at) saunatec [dot] comMessage posted via http://www.sqlmonster.com
View 2 Replies View RelatedHi All,
I need to generate Ascii 7 bit flat file, based on data in db, using integration services, FTP task. Currently i am generating file with ansi-latin and then using the script task converting it to the ascii 7. File looks to be generated properly. But when the target system reads this, they complain that the file has junk charecters some thing like this. when i open it after generating the file it looks fine to me in DOS also. I dont know what is the target system and what OS is used by them. what cud be the issue for these junk charecters and is it possible that a Ascii 7 file generated by windows doesnt work in other OS? If the method i am doing to generate the ascii 7 is not currect then what is the best method for this?
ÿþH^@D^@R^@|^@1^@E^@N^@I^@N^@A^@|^@O^@|^@2^@0^@0^@6^@-^@0^@9^@-^@1^@3^@
PS: earlier i had generated a flat file using data export from Excel & that worked in the target system well. is there any difference in the file encoding generated by excel and integration services?
Please help me!!!!
-vinu
I am working on a project that will be mimicking an existing interface that we have with one our our clients. That interface today sends EBCDIC packed fields. We do not want to introduce changes to the external clients interface file when we rebuild it in SQL 2005 Integration Services and I need to find out how I can take ASCII data and convert it to the host (mainframe) representation, which is what we currently provide to our external client using Integration Services.
Has anyone had to do this? If so, can I accomplish it natively with SSIS, or do I need to look to a third party vendor for a component?
Thanks,
John
john.minker@choosebroadspire.com
Hello,
I am glad if someone help me. My question is like belo:
i have ascii data in one column name(failcode), i want to use it to link with other table which is the data type in integer. so i have to convert it into integer type.
May i know how to write in query to convert ascii to int in Sequence Server(Microsoft SQL Server 7.0)?
I have a problem with alot of my SPs. All compile correctly but cause erroneous data due to IF statements begin ignored due to
characters (see below).
Example SP...
-- Opened within last 12 Months
IF @NEWACCIND = 1
BEGIN
EXECUTE usp_DFDX03_D0150_A4 @COSTALL OUTPUT
END
-- Accounts in Arrears in Current Quarter
Should look like ...
-- Opened within last 12 Months
IF @NEWACCIND = 1
BEGIN
EXECUTE usp_DFDX03_D0150_A4 @COSTALL OUTPUT
END
-- Accounts in Arrears in Current Quarter
I need to find all SPs with double
instance and manually replace. There are hundreds of SPs in total. I have tried
SELECTCOLID, ID
FROMSYSCOMMENTS
WHERECHARINDEX (CONVERT (VARCHAR(3), CHAR(13)+CHAR(13)), TEXT) > 0
but this also returns SPs containing 2 consecutive blank lines as well (which there are alot of due to formatting of T-SQL).
Really I need to distuinguish between
and new line which both appear to be CHAR(13)
Any one got any ideas
Thanks in advance
Jasper
Need to convert a sql query recordset to an ASCII tab deliminated to import into an excel spreadsheet.
Are there any work arounds for this.
Jah Red
jahred@globalmusic.com
Thought I would share this since it caused me so much grief.
In some mainframe systems, some dates are stored as the string "00000000". In my SSIS package, I was trying to anticipate for this string, as well as any other combination of zeros (e.g., "000", "0000", etc), since I had already seen lots of dirty data in the flat file (like non-printing characters, etc).
So, what I tried to do was perform an integer conversion on the string and test if it was the equivalent of the numerical value zero:
Code Snippet
(DT_STR)[ColumnName] == 0 ? ....
Now, for some reason, that doesn't work, even though a similar operation in SQL does work:
Code Snippet
SELECT TOP 1 ISNUMERIC('00000000') FROM tableName
In the end, I had to resort to testing for a match on the literal string "00000000" and hope that no other dates came in as "000" or other variation. Fortunately, this has been true so far.
However, the moral of the story is, converting a series of zeros into a numeric zero, and testing against that, does not seem to work. I don't have a good explanation for why that is, but I would guess it has something to do with the limitation of the conversion function.
Happy integrating.
Hi everyone,
I need to save the ascii data in my sql express 2005 database in one table and in 2 coloums in this table using VB express...
Can I do it by datareader or with bulk insert t-sql command?
I tried it this way but it gives error like "connection property is not initialised" it is on executenonquery row in the code...
Dim cmd = New SqlCommand("BULK INSERT RFID.dbo.stock(material_number,total) FROM 'C:can1.txt' " & _
"WITH FIELDTERMINATOR = ',', ROWTERMINATOR = '' ")
connection.Open()
cmd.executenonquery()
connection.Close()
I hope some can help with this problem....
I tried to setup a flat file data source that has code page 37 (EBCDIC)
Then I have a flat file destionation that is ASCII.
And inbetween I have tried several different data flow conversion tasks liked Data Conversion, and Derived Column. But I keep getting errors about different code pages.
I also tried to load the EBCDIC data into a SQL Server DB, and it complains about different code page.
Has anyone been able to do this with SSIS out of the box, without any extra components ?
Clarence
I've an issue with double-quotes in CSV file. One of the columns may contain this kind of value: "STATUS ""H"" "
I've got quote set to "
The file source fails on such records.
I found this thread and Scott tells us there that the file can't contain " in data.
Is this 100% correct?
I've got mutliple text columns and the pain is that I don't know which column might have these cases in future. To create a script means to write my own file parser for all files I use.
Any ideas?
Dima.
Hi,
I'm working on a database conversion from Sybase to SQL Server 2005 and have hit a wall with a character conversion problem when reading non-ASCII characters (encrypted password string) via JDBC.
My application runs on Solaris and accesses a SQL Server 2005 database via the Microsoft JDBC driver. The server was unfortunately specified as having a SQL_Latin1_General_CP1_CI_AS collation at installation time, and the database being accessed has taken this default. After creation the data was migrated across via DTS.
The invalid character is a dagger '†'. When read over JDBC it is converted to a question mark '?'.
In my original environment a Sybase database was accessed via JDBC driver from Solaris and the correct value was returned. The Sybase database used Latin1_General_BIN as it's collation. By way of experimentation I have modified the default collation sequence within the SQL Server 2005 database, and created a new table to hold the password. I am then able to correctly return strings containing this character from within SQL Server Management Studio, but the same problem still exists when accessing it via JDBC.
I am not sure where to focus my investigation and would be grateful for any useful pointers/advice. To me it looks like it's a JDBC driver issue as with the change in collation it works from a non-JDBC client.
Many thanks
Alistair
Adedoyin Akinnurun writes "i have a database that is running using regular ascii characters.. i am trying to migrate this database to support several other languges(globalization). I need ideas on how to migrate this database to UTF 8 .
Someone suggested converting all the varchar and char to nvarchar and nchar .. but i have a lot of data on the system and this might take a lot of time..
Any ideas would be appreciated !!!!"
Our database defines the long_value column as nvarchar(max). I want to find out which rows actually contain non-ASCII characters in that column, but this clause also returns rows with only ASCII characters:where long_value like (N'%[' + nchar(128) + N'-' + nchar(65535) + N']%')
What am I doing wrong?
hey all.
im new to the ASP/SQL scene, so please bare with me.
i have to send an email (with two attachments) through sql server.
the mail arrives, but the attachments are not attachments... they are ascii text in the body. im using an existing stored proc, which apparently works. so there is no reason this shouldn't work.
The file exists, the path is correct. Its obviously seeing and reading the file (otherwise there would be no data to print as ascii)
thanks all.
Also, if you know of a better place where i can post this thread, please let me know
Hi everyone,
I have to write a program in VB to receive the read data from a RFID reader for my graduation project.The problem is I am not a computer science student so I have only general info on programming.
I created my DB in VB express but I couldn't find out how to send the read data (that will be either in XML or ASCII format) to my database...The read data will be transferred to my computer by the RFID reader's software but after that I don'T know how to transfer it to my DB.As I know I have to use commands like read.xml etc,but no idea how write the complete program.
I checked the forum and couldn't find the answer,sorry if someone already answered my question and I missed it.
Thanks...
Can
Hi, i've question about how to import an ascii-file in a sql 2005 table.
I want to import this file also with an unique key. There i first have to get the last key form the table and then raise this key. Next step is to use this key during the import.
How do i have to do this in ssis?
Thanks in advance
Olaf
hi
we get ASCII data inserted into a SQL Server database by ODBC connection from an old UNIX system.
Example: INSERT INTO test.db VALUES ('123abc', '456ПРО')
All characters > 128 are converted to "?" automatically.
We tried to setup the database to the appropriate codepage, but we allways get "?" inserted.
Hi all !
I want to insert things to SQL-server from an ascii file but I also want to add logics with IF - Then _ Else statements. I guess the only way is to make a
stored Procedure.
How do you do when you want to read from a text file using the data into variables and then write it into the database ?
Hello,
SQL SERVER 2000:
My problem is that I have to process a special text file every day which contains 0 ASCII values to separate fields. The DTS import program drops everything after the ascii 0 value in the row, but of course I need the entire row with all fields.
So how can I prevent the text file import task from dropping everything after the 0 ascii value?
Could you help me in this?
thank you
Does anyone know how to query a field in a table where it contains anASCII code >= 128 - without looping through every field for everyrecord in table (using charindex)?Ex of char I would like to find: ü which is char(252)
View 1 Replies View RelatedI need to import an ASCII tab delimited file that has roughly 5,000 recordsonce a week into a SQL Server table. I have researched BCP and it seemslike the way to go. Am I headed in the right direction?Thanks in advance,James
View 3 Replies View RelatedI have an issue with some data that has a leading ASCII char 160 (the "a" with the accent mark) but it shows in query results as a space.
... where customername like char(160) + '%'
returns 2 rows but shows the customer name with a leading space. How would I change the collation or do otherwise to get this character to display correctly in the results?
Thanks!
-Dave