Dear Mr Portas and Mr Sommarskog,
Cause I am a newbie in sql, can I ask for your email address?
My email Address is Join Bytes!
Thanx
Best Regards
Michael
--
Message posted via http://www.sqlmonster.com
We have an identifier of who has performed an ection which populates a table with their email address in the format firstname.surname@domain. I am looknig for some code to split out the first name and surname (and, if possible, capitalise both) so uor audit report can show the actual name instead of the email address.
Has anyone encountered this issue previously and know a solution?
Many thanks in anticipation.
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
I'm trying to strip out the First & Last Name from an Email Address. The email address is formatted as "FirstName.LastName@emailaddress.com" but sometimes a middle initial is used (ex: "First.M.Last@emailaddress.com").
I can locate the '@' sign and the first '.' period(from left to right) but need to find the first '.' from the left of the '@' sign.
I'm doing this in a view.
Here's some sample data and what I've tried:
CREATE TABLE dbo.Table1
(EmailAddr VARCHAR(255))
INSERT INTO dbo.Table1 (EmailAddr)
SELECT 'Andy.Smith@gmaddr.com'
UNION ALL
SELECT 'Betty.Lee-Jones@gmaddr.com'
[Code] .....
Hello,
I will like to know the best practice for grouping email addresses in a table.
We have a basic table that has email address for admin users. Which goes thus
CLIENTS EMAIL
emailID int
username: varchar 20
Client_email varchar 150
The Above table is for our admin users. Enabling them to send out emails to clients. Based on their bills.
We have a second table for mass mailing. Which has emails in groups. Each group is based on the above entry. And groups could range from 5 users up to 100,000 users.
Whats the best way to implement this.
Do I create a seperate column for each email entry, knowing that this table would be extremely big, with a lot of repeated values, ie username etc. Or group them TOGETHER as varchar(max)
PLEASE ADVICE, best practices
thanks
Mary
Yes O !
There is a Table DISPLAY_DETAILS in which a Column - DISPLAY_NAME, which displays data in it as :
Joe Barnard(123456);Paul Johnson(114454); - Display as Name(Employee Id).
There is a EMployee Master Table EMP_MASTER Which contains Employee Id and Email Address Columns.
From this: Joe Barnard(123456);Paul Johnson(114454); I need to get the Email Address for these Employee Ids - 123456 and 114454
Hi,I have 2 fields in a database: 'email' and 'website'.In the majority of cases, the website field is not populated even though theemail address is. In 90% of cases, the website will be 'www.' followed bywhatever is after the '@' symbol in the email address.Would anyone be able to help me with the SQL that would take whatever isafter the '@' sign in the email address, add it to 'www.' and populate the'website' field?Thanks!
View 3 Replies View RelatedHi
do you know incase a script which extracts domain names from an email address?
like foreg. we have xyz@dmc.com or abce@dmc-int.com
should give
dmc and
dmc-int
i ve a filed named "Email" of datatype .i ve created this field to insert email address in this field.but when i insert an email address like "bilal@yahoo.com" from a textbox wh is in an ASP.net webpage then in the filed i see this "System.Web.UI.WebControls.TextBox".
can u plz tell me how to fix this
Regards
Ahmed Bilal Jan
Could this query be made more efficient?
It takes ages to run it. It strips of everything from an email address and keeps only the domain.
SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, CHARINDEX('.', SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, 100)) - 1) AS mail_domain
this is what i am looking for,
A client with an email address that does not end in uk cannot make a room booking
Any ideas
ms sql server
data:
idno Email Category
1 a@a.com c
2 b@b.com c
3 b@b.com c
4 b@b.com c
only unique email address record are requierd.
1 a@a.com c
2 b@b.com c
what could be the query for such requirements.
(NOTE: FROM a NON-IT PERSON) We've implented SQL 2005 and Reporting Services, but our subscriptions only work internally: when we try to send reports via subscriptions to valid external email addresses, we get a message: invalid email address and the entire subscription does not work.. PLEASE ADVISE. IT WILL BE GREATLY APPRECIATED!
I would like to use ISS to extract the user name and email address out of the active directory. I would like to put it in an MS-SQL 2005 table that I can use stored procedures on. I am hoping I can use a query to do it but I understand there is a 1000 entry limit on the extraction of the Active Directory and I have more than 1000. Could someone point me in the right direction please. Thanks.
View 1 Replies View RelatedI just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
how do I set up a SQL2000 server to send an alert to both an email address and a pager when a specific event occurs..please help!!! The server is in a different location and we need notification of problems!! thanks
View 1 Replies View Relatedi have a situation where is need to get email address from a varchar column. Here is some sample data for five records; The format can be change.
dummy text;
Tel: +44 (0)1234 566788;
Email: bbc@co.uk
Admissions dummy text;
T: +44 (0)1234 4444;
E: xyz@co.uk;
dummy text;
dummy text;
Tel: +123 32323 33;
Email: test@yahoo.com;
dummy text;
t: +88 (0) 115 333 5553;
f: +99 (0) 115 222 8888
e: dummy@gmail.com;
dummy text;
t: +11 (0) 222 222 2222;
e: myemail@test.com;
w:http://www.yahoo.com/faqs;
I am trying to retrieving all email address using particular domain extension for e.g. gmail.com
I wrote the below query
Select policyid,emailaddress from policyholder
WHERE policyholder.EmailAddress like '%gmail.com%'
It works fine, but i want to use the LIKE condition against ‘emailaddress’ column in email table as I have more than 100 domain extensions
I wrote something like
WHERE policyholder.EmailAddress like (select emailaddress from email) but I am getting the below error
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Hi,
The Browser role has the task Manage Individual Subscriptions. Fine, the user can create a subscription. The problem is that the reportserver populate the email address text box with the Windows User ID and does not let the user change this to put his email address instead. The text box is greyed out.
I found that to enable the text box I have to add the task Manage all subscriptions to the role "Browser".
This is a major security problem because with this setting any user can edit any subscription.
I suspect that I could work at the Active Directory level to populate a field that would in turn populate the email address with the correct data., however this is not an option for me. I have absolutely no way to do it or get it done. Does anybody has an idea on how I could allow a user to edit his email address in his subscriptions and not let him tamper with other users subscriptions?
Thanks
Philippe
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
I have subscription by email problem on the following configuration:
Windows XP prof.
SQL Server 2005 Enterprise
Configured Database Mail with remote SMTP server to send email successfully
Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>smtp.broadband.rogers.com</SMTPServer>
<SMTPServerPort>25</SMTPServerPort>
<SMTPAccountName></SMTPAccountName>
<SMTPConnectionTimeout></SMTPConnectionTimeout>
<SMTPServerPickupDirectory></SMTPServerPickupDirectory>
<SMTPUseSSL></SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>0</SMTPAuthenticate>
<From>My email Address</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend
Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
Dear GroupI've installed MSSQL 2005 STD on Vista and now can't attach mydatabases.I've installed SQL SP2 and the SQL Vista Beta Update.The error I'm getting is:Unable to open the physical file <Path to MDF>. Operating system error5: '''5(Error not found)'''. (Microsoft SQL Server, Error: 5120)Thanks for your help. All your hints are very much appreciated.Thanks,Martin N FeuersteinerInvent2b Group
View 6 Replies View RelatedHi
everybody.
I am new to VBA,.,, I Have created a folder under inbox in Outlook 2007 which stored the receipients information
like name, E-mail, which is not present in the address book of outlook.
I have imported this folder in access 2007. My problem is ... it does not display the email address.
Rest of the informations is displayed... Is there any way i could do this.??
is there any way i could get the email addresses to appear(import/get) in to the access table???
Is there any module i mite have to create??
Plz help...
thanks a million
Mr Westmore seems to have a superiority complex
Newsflash: we are not here to criticize one another's advice
The guy gave some decent advice and not everyone can be a guru like yourself, sir
I say that only because you've previously expressed a similar attitude.
Good day.
I doubt this is possible, but can someone think of a way to change the email address used for sending report subscriptions based on the report or subscription?
It's a need that I've heard from a number of different clients. Scenario: a company has one reporting services server with reports running from numerous departments. Report subscriptions are sent to internal and external email addresses and there's a business need to use different "from" addresses based on the report (or audience).
I am very new to SQL Server Express, so I watched the video on how to create permissions in SQLSE. I did what I seen, and I still cannot connect to the specifed database.
I did create a login account in the main part using SQL Auth., then I create a login account in the database, and set its role as dbowner.
After all that I disconnected the object explorer and tried to use the account that I just made and it didnt work, I also went to VBE and tried to connect from within the database explorer and I got the same error above.
I can go to a different pc and try to connect with the same result.
I did watch the video again to make sure that I didnt miss up and what I did was right by the video.
I did try to set another name and user account with no prevail.
Where did I miss up?
Davids Learning
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
View 2 Replies View RelatedUnder IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
need help
split list of email add comma for evry email
i have tabe "tblLogin" and in this table i have field emall
like this
emall
-----------------------------------------
aaa@hhhh.mm
nnn@hhhh.mm
mmm@hhhh.mm
need to do ilke this
Code Snippet
@list_email = (SELECT emall FROM tblLogin)
--------------------------i get this
-----------------------@list_email=aaa@hhhh.mm ; nnn@hhhh.mm ; mmm@hhhh.mm
@recipients = @list_email
Code Snippet
IF EXISTS( SELECT * FROM [db_all].[dbo].[taliB] )
BEGIN
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
Date_born AS 'td','' ,
Age AS 'td','' ,
BirthdayToday AS 'td','' ,
BirthdayThisWeek AS 'td'
FROM [Bakra_all].[dbo].[taliB] ORDER BY LastName FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX))
SET @body ='<html><H1 align=center>aaaaaaaaaaaaaaaaaaaaaa</H1><body ><table border = 1 align=center dir=rtl>
<tr>
<td>name</td>
<td>fname</td>
<td>date</td>
<td>age</td>
<td>aaaaaaaaa</td>
<td>bbbbbbbbbbbbbbb</td>
</tr>'
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =N'rrr@iec.co.il',
@copy_recipients='rrrrr@iec.co.il',
@body = @body,
@body_format ='HTML',
@subject ='ggggggggggggggggggggg',
@profile_name ='ilan'
END
ELSE
print 'no email today'
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
Hi All
I want to know that if different users have access to a database with same loginName and password then how can I get the IP address of a particular user through a query.
Thanks in advance Anisha
Does anyone know how to get the machine IP address from a Transact-SQL statement ?
Eyal
Hi,
I am making a DTS package and would like to:
1) create a file then,
2) transfer this file to another location(not on the same server).
How would i do the ftp part ?
The file transfer protocol task only lets u download from another site; how would i upload a file to another site ?
thanks.
Clayton