Assign A Variable Based Upon Query Results...how To Do It?
Feb 23, 2007
I have the following code which is incomplete. Where it says:
txtVendorID =
I need it to equal the results of the field VendorID from my query...here is my code. What do I need to add there?
Dim cmdSelect As SqlCommand
Dim intRecordID
intRecordID = Request.QueryString("RecordID")
strConn = ConfigurationManager.AppSettings("conn")
conn = New SqlConnection(strConn)
cmdSelect = New SqlCommand("spMfgRepListAddaspxByRecordID", conn)
cmdSelect.CommandType = CommandType.StoredProcedure
cmdSelect.Parameters.AddWithValue("@RecordID", intRecordID)
conn.Open()cmdSelect.ExecuteReader()
txtVendorID.Text =
conn.Close()
I have an aggregate transform that outputs two columns, a group by (DT_STR) and a count(column name) (DT_UI8). The results are put into a Recordset Destination. When I attempt to map these columns to variables in a Foreach Loop Container (using a Foreach ADO Enumerator), I get the error:
Error: 0xC001F009 at ExtractNNRPersonUpdates: The type of the value being assigned to variable "User::NNRPersonCount" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC001C012 at Foreach Household Loop Container: ForEach Variable Mapping number 2 to variable "User::NNRPersonCount" cannot be applied.
The variable mentioned in the error message is setup as a UInt64. I've tried all other integer data types and nothing works. I also tried changing the data type of the count coming out of the Aggregate transform but received a warning stating this isn't possible.
I don't know if anyone has encountered this before but here goes:
I've a select clause below: result = "Select * from person where LocalName LIKE N'" + queryLocalName + "'"
queryLocalName is an input field that allows the user to search for non-English characters in the database.
What I'm wondering is what kind of effect is the N in the where clause is having?
I can't seem to get it to work when doing it via the web. I've tested in the database itself, got it to work using the SQL Analyser but when testing on the web, it can't find because ? are appearing in the result.
I have a stored procedure which selects results based on some date calculations.
In my table I have a status column and two date fields (Approval Date and Signature Date) If the value in the status column says approved I want to select results where approval date - signature date is less than a certain number of days.
If the status is naything other than approved i want to select results where sysdate - signature date is less than the given number of days.
I have a SQL query that finds a value which I need to pass into an SSIS variable so I can use it later to set the filename for my data flow task. So far, I have been unsuccessful in determining how this is done.
google searches, etc seem to be fruitless for me, there are so many hits but none really seem to address what I want to do because there are so many things you can do with variables. Likewise the books online and the boks I have on SSIS also only give a very high level of info. I need some examples, if anyone could help I would appreciate it.
Here is the basic gist of my query:
exec SP_GET_FILE_NAME @file_name OUTPUT
I need to take the resulting @file_name and store it in an ssis variable. How?
Can anyone tell me or point me in the direction of how I can store select query results to a variable in VB.NET? Im using the SqlDataSource control with dropdowns and textboxes for searching. I want to store the search results in a variable on the button click event.
I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.
DECLARE @tblCustomRange AS TABLE
(
RecordID INTEGER IDENTITY(1,1),
RangeMonth INTEGER,
RangeDay INTEGER
)
DECLARE @Month INTEGER
DECLARE @Day INTEGER
-- Initialize month and day variables.
SET @Month = 8
SET @Day = 11
-- Insert records into the table variable. INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,2)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (1,27)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (6,10)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (9,22)
INSERT INTO @tblCustomRange
(RangeMonth, RangeDay) VALUES (12,16)
-- Select everything from the table variable ordering the results by month, day in -- descending order
I use SQL Server 2005 and in a Stored Procedure I want to execute a sql statement and assign the result to a variable. How can I do that?The name of the column I want to retreive the value from is "UserID"Here's my SP so far: ALTER PROCEDURE [dbo].[spUnregisterUser] @UserCode int AS BEGIN SET NOCOUNT ON; declare @uid uniqueidentifier --get userid SELECT @uid=UserID FROM tblUserData WHERE UserCode=@UserCode -- Delete user UPDATE tblUserData SET IsDeleted='True' WHERE UserCode=@UserCode END
How do I assign XmlDocument results to a variable (so that I can pass it to a sp)?
I know that the following code works....
select * from tblUsers where userId = 1225 for XML raw
It returns "<row UserId="1225" LastName="Evans" FirstName="Stephanie" MiddleInitial=...."), which is what I want. But when I try to assign it, I get an error "Incorrect syntax near 'XML'."
declare @strXml nvarchar(1000)
set @strXml = (select * from tblUsers where userId = 1225 for XML raw)
I am trying to achieve a seemingly simple task of assigning datetime value to a user variable at the point my package starts running. How can I do this without using a SQL Script Task? Should I be using a script task for this or is there a simpler way to achieving the same thing?
I have a column with int data type.. i am trying to assign this column to a variable ( int) in For Each Loop..but it keeps giving me an erro
The type of the value being assigned to variable "User:ubcontractor_Key" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Am i getting this error becasue the column has NULL value?. how can I resove this probelm?
I have a MSSQL2000 table called partspec.dbo.locationIn this table are 2 smallint columns: Tester (numbered 1-40) and Line (numbered with various integers)I am trying to create a stored procedure to read the tester number like so:Select Tester from partspec.dbo.location where Line = 2which will return up to 5 tester number results, lets say 11, 12, 24, 29 ,34My question is how do I store these tester numbers into 5 variables so that I may use them later in the sp ? So it would go something like this:CREATE PROCEDURE Table_Line (@Tester1 integer,@Tester2 integer,@Tester3 integer,@Tester4 integer,@Tester5 integer)ASSELECT Tester FROM partspec.dbo.location where Line = 2Now this is where I'm confused on how to get 1 value into 1 variable and so on for all 5 values returned. This is what I would like to happen: @Tester1 = 11@Tester2 = 12@Tester3 = 24@Tester4 = 29@Tester5 = 34GOThank you for any and all assistance.
I'm using a stored procedure to create a table in sql 2000. One of the columns is an identity column. I need to set the seed to a max(number) from a column in another table, this column is not an identity column and can't be changed into one. I've been trying to set the seed by passing a variable. I continue to get errors so either I've got the syntax wrong or it's not possible to set the seed via a variable. Any words of wisdom would be appreciated.
I have this big huge SQL statement. I am trying to see whether there is some quick magic way to assign it to the variable @SQL
Declare @SQL NVARCHAR(MAX) Set @SQL = <????> SELECT ClaimSurgical.FormNbr as ClaimIdentifier,ClaimSurgical.MemberTID, ClaimSurgical.Membernbr as MemberNumber, ClaimSurgical.AdmitDate AS ServiceDateYYYYMMDD, CAST(CAST(ClaimSurgical.AdmitDate AS VARCHAR) AS DATETIME) ServiceDate,ClaimSurgical.ProviderNbr as ClaimPRVNO, ClaimSurgical.VendorNbr as ClaimTaxID, ClaimSurgical.AssignedProvider1 as PCPPRVNO,ClaimSurgical.CAPVendor as PCPTaxID, EventCode_1.EventCodeTypeID,
Hi this is probably a very stupid question, but I still need to know.
How do I set the result of a 'SELECT' statement to a variable? I know I can use CURSOR, but I am certain the SELECT statement will return either 1 record or NULL. Can I use something else apart from CURSOR?
I want to use a variable in a number of SQL statements as paramenter. But I am not sure how to assign the value I want to the variable. The value I want is the maximum week number from one of my tables. I know how to put this value into a new table (which is one field and One row), but I cannot see how to pass this value to my variable. Using the table in my SQL is not straight forward unfortunately, at least not for me.
Greeting. I have a dataset (ORDER BY Column1) like the following in the data flow task pipeline
Column1 Column2
1 A 1 B 2 C 2 F 3 T 3 R 3 X 4 M
I only need data of 1, A;
2, C;
3, T 4, M That is when Column1 value changes. I think we can store the column1 value in a variable as a previous row value. Then I can compare the variable value with the current row value and see if the column1 value changes. Can anyone please help me how to implement this? Or if there is other way to implement it
I've got this query inside a Sql Task against a Excel connection and I'd like to insert that value into a user variable called "Proyecto". How do I such thing?
Hi, I'm trying to update a sqlserver database through vb.net in an asp.net 2.0 project. I'm using a sqldatasource and am trying to code an update parameter with a session variable. code snippet: <UpdateParameters><asp:Parameter Name="hrs_credited" /> <asp:Parameter Name="updater_id" DefaultValue="<%$ Session("User_ID")%>" Type="Int32"/> <asp:Parameter Name="activity_id" /> <asp:Parameter Name="attendee_id" /></UpdateParameters> The error message that I receive is: Error 2 Literal content ('<asp:Parameter Name="updater_id" DefaultValue="" Type="Int32"/>') is not allowed within a 'System.Web.UI.WebControls.ParameterCollection'. C:DevelopmentCMEdataentryattendance.aspx 29 Does anyone have an idea how to assign the session var value to the parameter? Thanks!
I am trying to figure out a way to retrieve a field value and assign it to a local variable with out destroying the whole structure of my T-SQL statement.
Here is the code:
DECLARE @AVERAGE_WHOLESALE_PRICE VARCHAR(20) DECLARE @ORDERBY VARCHAR(20) SELECT TOP 1 @AVERAGE_WHOLESALE_PRICE = P.NPT_PRICEX, CASE NPT_TYPE WHEN '07' THEN 1 WHEN '09' THEN 2
[Code] ....
The error message is Msg 141, Level 15, State 1, Line 3 A SELECT statement that assigns a value to a variable must not be combined with data-retrieval operations.
I am wanting to capture the file name I am using to load data from and use it in a SQL statement to insert it along with the data that I load.
I am using a ForEach container to load all my .txt files but cannot figure out how to capture the name of each source file as it loops through the files and then add it to my insert statement that is populating my history table. I would think that the ForEach container has that information, but I do not see how to access it and assign it to a variable that I could use in my SQL statement.
I have a derive column( sequence) transformation in data flow , i am trying to assign this column to a variable , so that i can use it in the SQLtask control flow... how can i do this? can you show me some examples?
