I have created a database test and created a login name devloper for the database test
Now I have created database test2 and want to connect to the database test2 with same login developer.
How can i do that .
I have changed in the security able to connect to test2 but unable to see tables and views.
What may be the cause.
I have migrated over 700 databases to another server and now I have to add a specific user to all these databases and sync , looking for script to add this user at once to all these databases.
View 9 Replies View RelatedIs there a simple SQL/stored procedure to assign a user to be db_owner on all databases in a SQL server?
In our env., we have SQL Server 2000, 2005 and 2008 ...
I have a MSSQL2000 table called partspec.dbo.locationIn this table are 2 smallint columns: Tester (numbered 1-40) and Line (numbered with various integers)I am trying to create a stored procedure to read the tester number like so:Select Tester from partspec.dbo.location where Line = 2which will return up to 5 tester number results, lets say 11, 12, 24, 29 ,34My question is how do I store these tester numbers into 5 variables so that I may use them later in the sp ? So it would go something like this:CREATE PROCEDURE Table_Line
(@Tester1 integer,@Tester2 integer,@Tester3 integer,@Tester4 integer,@Tester5 integer)ASSELECT Tester FROM partspec.dbo.location where Line = 2Now this is where I'm confused on how to get 1 value into 1 variable and so on for all 5 values returned. This is what I would like to happen:
@Tester1 = 11@Tester2 = 12@Tester3 = 24@Tester4 = 29@Tester5 = 34GOThank you for any and all assistance.
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
If I have a stored procedure that returns 15 tables, how do I distinguish the tables to assign variables to each table in c#?
View 6 Replies View RelatedWe have a SQL enterprise server 2014 with two installed instance.
First instance for SharePoint 2013 DBs and second instance Dynamics AX 2012 R3 DBs.
The server has 32 GB of RAM, currently the process usage for first instance is 26 GB and second instance is 700 MB.
Which mean that SharePoint DBs in the first instance is consuming most of the RAM.
My question is there any way to assign a fixed RAM usage for a specific instance without affecting the other instance?
for example 16 GB only first instance and 16 GB to second instance.
i have created a new login in primary server and provided dbowner permission to primary db.how do i transfer this login to secondary server and assign the same permission to secondary db ?
View 2 Replies View RelatedI'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
Hi!
I have 7 source databases and one target database, all using the same structure. The structure is made of 10 tables, with foreign key constraints.
I need to merge the source databases into the target (which won't have any data before that process, but will already have the correct schema), and to keep the relationships between the records.
I know how to iterate over the source databases (with SMO foreach), but I'd like to know if someone can advise the best copy method for that context in SSIS ? (I don't want to keep the primary keys, but I need to keep the relationships...)
Any pointer most welcome!
best regards and thanks
Thibaut
I am trying to restore multiple .bak backup SQL database files onto a new server. However, I have found that it will not allow me to restore multiple databases at once. Is there a way to do this so that I do not have to manually upload one at a time? I tried adding all the .bak files at once to the backup device window but it only did the first one listed. It would be so much easier to restore them all at once so that I do not have to continue this manual process. I am restoring them via device.
View 13 Replies View RelatedHello,
I am in the progress of designing a new section of my database and was thinking of creating a hole new database instead of just creating tables inside the database. My question is can you JOIN multiple tables in an SQL Statement from multiple databases. Ie, In the Management program I have a database called 'Convention' and another one called 'Services', inside the two databases there are many tables. Can I link say tblRegister from Convention to tblUser in Services?
Thanks
Hi everyone,
I have an instance with many databases in it. I am looking for the easiest way to see which of those databases a user has a login on. What is the most efficient way of doing this?
Thanks,
Anil
Dear all,
I wrote the below script to add a SQL server login account that is the db_datareader, db_datawriter, and granted permission on all stored procs, functions, and views on all databases within a server.
Code Snippet
USE master
GO
SET NOCOUNT ON
DECLARE @database_name sysname
DECLARE @object_name sysname
DECLARE @object_type char(2)
CREATE TABLE #databases (DATABASE_NAME sysname, DATABASE_SIZE int, REMARKS varchar(254))
INSERT #databases EXEC sp_databases
-- ++++++++++++++++++ add SQL Server Login ++++++++++++++++++
IF EXISTS (
SELECT 1 FROM master.dbo.syslogins
WHERE [name] = 'WEB_USER2'
) BEGIN
DECLARE db_cur CURSOR LOCAL FAST_FORWARD FOR
SELECT DATABASE_NAME FROM #databases
OPEN db_cur
WHILE 1 = 1
BEGIN
FETCH db_cur INTO @database_name
IF (@@FETCH_STATUS <> 0) BREAK
EXEC ('USE ' + @database_name +';
IF EXISTS (
SELECT 1 FROM sysusers
WHERE [name] = ''WEB_USER2''
) BEGIN
EXEC sp_revokedbaccess ''WEB_USER2''
END
')
END
CLOSE db_cur
DEALLOCATE db_cur
EXEC sp_droplogin 'WEB_USER2'
END
EXEC sp_addlogin
@loginame = 'WEB_USER2',
@passwd = 'password'
-- ++++++++++++++++++ loop thro' all User-Databases ++++++++++++++++++
DECLARE db_cur CURSOR LOCAL FAST_FORWARD FOR
SELECT DATABASE_NAME FROM #databases
WHERE DATABASE_NAME NOT IN ('master', 'model', 'tempdb', 'msdb', 'distribution', 'ASPState')
OPEN db_cur
WHILE 1 = 1
BEGIN
FETCH db_cur INTO @database_name
IF (@@FETCH_STATUS <> 0) BREAK
PRINT ''
PRINT 'Current database=' + @database_name
-- add user to databases
EXEC ('USE ' + @database_name +';
IF EXISTS (
SELECT 1 FROM sysusers
WHERE [name] = ''WEB_USER2''
) BEGIN
EXEC sp_revokedbaccess ''WEB_USER2''
END
')
EXEC ('USE ' + @database_name +'; EXEC sp_grantdbaccess ''WEB_USER2''; ')
-- add user to db_datareader
EXEC ('USE ' + @database_name +'; EXEC sp_addrolemember ''db_datareader'', ''WEB_USER2''; ')
-- add user to db_datawriter
EXEC ('USE ' + @database_name +'; EXEC sp_addrolemember ''db_datawriter'', ''WEB_USER2''; ')
-- grant permission on Stored proc, Scalar function, Inlined table-function, Table function, View
-- !! coz EXEC is a self-contained batch, so must use GLOBAL
EXEC('USE ' + @database_name +';
DECLARE obj_cur CURSOR GLOBAL FAST_FORWARD FOR
SELECT [name], [type] FROM sysobjects
WHERE [type] IN (''P'', ''FN'', ''IF'', ''TF'', ''V'')
')
OPEN obj_cur
WHILE 1 = 1
BEGIN
FETCH obj_cur INTO @object_name, @object_type
IF (@@FETCH_STATUS <> 0) BREAK
-- PRINT 'object=' + @object_name + '; type=' + @object_type
IF LTRIM(RTRIM(@object_type)) = 'P' OR @object_type = 'FN'
BEGIN
-- EXEC on Stored proc, Scalar function
EXEC('USE ' + @database_name +'; GRANT EXEC ON dbo.' + @object_name + ' TO WEB_USER2 ')
END
ELSE
BEGIN
-- SELECT ON table function, View
EXEC('USE ' + @database_name +'; GRANT SELECT ON dbo.' + @object_name + ' TO WEB_USER2 ')
END
END
CLOSE obj_cur
DEALLOCATE obj_cur
END
CLOSE db_cur
DEALLOCATE db_cur
DROP TABLE #databases
plz revise it if you have better idea! Thx!
Hello,
My company works with SQL Server 2005 express locally with Visual Studio to develop websites. Everything works very well.
We use SQL Server 2005 express on our production server as well. We change the database over to a non-User Instance when the site is ready to go live. Everything works fine here as well.
We run into issues when databases get near 100 MB. This is well below the stated database size limit for Express of 4GB.
At that point, about once a day, a site with a "large" database will stop responding. The error that we'll get is "Cannot open database 'DBNAME' requested by the login. The login failed. Login failed for user 'DBUSER'
The only way we've found to fix this is to restart the SQL Express service. Obviously, that isn't a very useful alternative.
Has anyone run into anything like this? Could we have some setting wrong?
Would moving to the full version of SQL Server 2005 fix this?
Hi
I have created a new login in SQL Server 2000.
I have hooked up to more than one database which creating the login.
In syslogins we can see only the default database associated with that login.
I want the list of all the databases for that specific login..
How could I get them?
-------------------------------------------------------------------------------
My main task is to create a login under a specific database.
For which I'm validating whether that login already exists or not I'm checking it in the syslogins table. I need to specifically check it is in my databse or not....for that what should I do...
Thanks in advance
Deleting a Login from a server instance and adding it back did not show that the login was still mapped to databases. In SQL Server 2008, adding a Windows Login did not permit access to end user databases until the Windows Login was mapped to various databases. In SQL Server 2012, once a Windows Login is added to SQL Server Security, it may access ANY end user databaseWe use the following to circumvent this problem, Windows Login by Windows Login: DENY VIEW ANY DATABASE TO [TESTTest1]
View 6 Replies View RelatedHow to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution
2. Audit logins off/on is also not good solution.
3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
Is it possible to retrieve Data from SQL Database #1 and insert it into SQL Database #2 using a Stored Procedure? Thanks. If so Can you show example. Thanks
View 12 Replies View RelatedHi All
I have a question about having one or multiple databases for a large project. What are the main differences between designing my database as one or breaking in to multiple databases. I should mention that there are many relationships between tables in different DBs in the multiple DBs state?
regards
sasan
Hey there!
I'm not sure how to explain this but here goes...
I'm a bit stuck, a new project that's come about "requires" me to query multiple databases as if they were tables.
1 Oracle database which stores information on our staff (this database is a part of some MIS software and can't be changed in any way)
1 SQL Server 2005 database which stores information on staff sickness
Basically say theres 1 table in each database
Oracle DB
People
Person_Code
Forename
Surname
SQL DB
Sickness
Person_Code
Daydate
Lets say the query I want to perform is to select all the records from sickness where person code is 22334 and also get their name from the other db, so the output may look like
22334 Dann Rees 01/01/2007
22334 Dann Rees 03/01/2007
22334 Dann Rees 10/02/2007
Now I realise I can write a quick function to pull the information but this is just a basic example. Effectivley what I "need" is to be able to query sickness while sub querying people to get the names, or some kind of pass through query?
Please remember this is just a very simple example and the "actual" queries will be far more complicated, for instance finding all the employees of a certain department who is male and was sick in January. All the data for that example is stored in people (oracle) except for the dates which is stores in sick (SQL 2005). Now these are easy enough if they were tables in 1 database....but their not, their tables in 2 databases, and theres nothing I can do to change that :(
All help appreciated as this is becoming very urgent.
Many thanks
Dann
(I couldnt post this in the General data access forum for some reason)
Hi all:I am trying to create a website which will search and return results that are from multiple tables in different databases. I have the code to search a singular database right now, and I tried to make a connection to a second one, which worked, but I don't know how to send the proper sql commands to the second database or how to link them in the code. Does anyone have any pointers on creating a site which will search different tables in different databases with a known connection between databases? Any help would be really really really really appreciated.-Shrey
View 3 Replies View RelatedHow can I include tables and views from database A when building a view in database B, if possible?
Same for stored procedures.
so, I am trying to write an sql that requires information across two
different database. It's under the same sql server. However, the
location of the tables are from different database.
Any links I can read about that can show me how to write the queries?
Thanks in advance, and merry X'mas.
We have a number of databases(on sqlserver 7.0) which has the same structure but with data for different users. We would like to change the structure of the databases with minimum effort and with minimum down time.
Is there any method to automate the change so that the change is reflected in all the databases when a single database structure is changed?
Any suggestions in this regard are welcome and urgent
Okay this is a test...actually I am still learning SQL and need some help. Does anyone have any information on being able to move indexes from one database to another. My scenario is I have 3 databases, Development, QA and Production. I want to move/copy indexes I created in Development to the QA database. I have many indexes so I do not want to have to recreated them if I can avoid it. Any suggestions?
Thanks!
Hi,
Currently developping a c# database based application, which will be used in different establishments worldwide. I'm currently a bit confused by the ms sql features offered. Because the huge data amount which will be fetched during application use from the database, the best option is probably to put a ms sql server in each establishment to realise quick data fething. Problem is that the servers, which are all running on the same database design have to be synchronised real-time. I read about datareplication with the merge option which I thought was a nice solution. The subscribers can only have read-only rights on these subscriber databases, because the merging doesn't work appropriate i heard, so this is no good solution. Then I read about distributing transaction coordination. Seems a good solution as well, but what happens if a server system crashes for one day and then comes back online? It won't be up to date anymore... Right now I think about a combination of these 2 features. DTC in combination with merge replication, but there must be a better solution. Fact is that a lot of users will be editing data worldwide non stop, and everyone has to be up to date. Because of huge data fetching I don't think it's a good solution to let everyone work worldwide with one single database. Is there a possibility to realise this with ms sql server? Because I'm getting more and more confused... Thx in advance.
I need some guidance! We are running SQL Server 2000. We have 4 or 5 databases with the same schema, and I need to make sure that their structures all stay synched. We will have more soon. I also need certain tables to have the same data across all the databases.
I need a way to manage changes on the multiple databases! Right now I generate a script in Enterprise Manager, then run it in Query Analyzer on each database, manually. There's too much room for error here.
Any suggestions are appreciated! I am currently evaluating Embarcadero's products, but they are complicated and confusing - I'm not sure yet which of their tools is meant for this purpose.
Thanks,
Avi
I have a problem like this. I have an application which shud be internet hosted. All transactions should be updated to the central server of the net as well as an intranet DB server. (I'll have a DB server - SQL Server 2000 in each intranet). Is this possible.. i'm planning to use ASP to develop the net based application.
Thank you in advance..
Geetha R
Ok, so right now we have a bunch of queries similar to the following:
Code:
use db001 select co#=(001), fieldvalue from tablename where fieldid = '1'
use db002 select co#=(002), fieldvalue from tablename where fieldid = '1'
what i need to find is if there are duplicates of fieldvalue and have it display all in one.
Basically right now we run all these there are 25 databases and we export everything to a file and then open it in excel. we then format it it so its just co# and fieldvalue and then look for duplicates.
i would like to avoid the whole excel part and just run a query that will display any duplicates of fieldvalue across all 25 databases in "tablename"
hope that makes sense. - Thanks
Could anyone possibly help me out with an issue I am having...
I need to copy all my SQL2005 databases from Server1 to Server2. How can I, using SSIS, copy all the databases and not just 1 specific one (database transfer task)???
My actual task is much deeper than this, but this is the main problem I seem to be encountering and I cannot find this anywhere on the web...
Over and above the what I have mentioned, is there a way to also specify a name of the target DB the copy will go through to?
e.g. Server 1 has 3 instances, each one with a different copy of the same DB.
I would like to copy all 3 copies to Server 2 running 1 SQL instance, but to target DB's like DB_dev, DB_prod and DB_test.
The latter section is not so crucial at the moment, but the first part is really an issues I am struggling with at the moment...
Any help would be greatly appreciated.
Thanking You in advance!!!!!
I'm very new to SQL, so you'll have to excuse the nubishness of this question. I've got my trusty O'Reilly book here!
We're using Microsoft SQL Server 2005 on our web server. I'm currently working on a project to get a few MS Access Databases available on the web page.
The web part is actually working fine, with the DBs exported into SQL for performance reasons. (From what I've read pulling data from the .mdb file could cause me problems in the future, so I'm tossing it all onto the SQL server from the start.)
Before I get into the project full-tilt, though, I'm curious about how best to organize all the data?
I'm using the Upsizing Wizard in Access for the conversions, and every new DB gets added under Databases. If this gets approved I may be looking at well over a hundred DBs which will eventually be converted and made web accessible.
I can keep everything neat and tidy on the web server by just tossing things in a few directories, but the menu on the SQL Server Management Studio is going to become a mess really quickly if I let it just keep adding to +Databases.
Is there a way to sort everything into a series of folder/groups, like how System Databases has it?
Thanks in advance,
-Lamune