Hey all!
Okay, can I assign line x of a flat file to a variable, parse that line, do my data transformations, and then move on to line x+1?
Any thoughts?
In other words, I'm looking at using a for loop to cycle through a flat file. I have the for loop set up, and the counter's iterating correctly. How do I point at a particular line in a flat file?
Thanks for any suggestions!
Jim Work
hello,i would like to loop through a record set and assign each value to thesame string, (example i would like to return all of the first name inthe authors table = Authors_total.)should i use a cursor or just a loop to do this? I have had sometrouble with the syntax in a cursor.nicholas.gadacz
View 4 Replies View RelatedHi,
I'm attempting to use a variable to define the file name in my flat file connection (for error files in my SSIS package).
I have it defined as follows:
@[User::ValidRootFolder]ConditionConditionSourceError.csv
However it throws an error 'the filename, directory name, or volume label syntax is incorrect'.
If I put the value of the variable in explicitly it works, so I know my variable name is correct - am I just not calling the variable properly?
Thanks
Hi,
i have simple requirement...but dont know how to proceed. I need to move the first record from a flat file (file1) to another flat file(file2) using SSIS, file1 will have many records but i just need the first one alone to be moved. Any pointers on this would be of much help.
Thanks,
raj
I'm rather new to ssis and I've been reading and testing but didn't find a solution for this problem.Supose I've got a table Customer with some fields. One of the fields is CustID.I want to create as many flat files as there are Customers in the table with flat file name set to the CustID.If you could point me in a good direction, It would be nice.Greetings from Belgium
View 4 Replies View Related
I have a simple CSV/XLS dump that i need to put up on the server. I would need to create a file output daily and need a variable name to identify them easily.
I have the problem of naming it in the "connection string" easily and i have tried variables and expressions too.
I am new to this so please need help.
Thanks
Hi,
How can I write the value of a variable to a flat file in SSIS?
In particular, I'm creating a flat file I'm storing the data of a table. I'd like to add a header that displays the value of a variable that contains the record count. How can I do that?
Thanks in advance,
Che
I have a number of DTS packages I am trying to convert and am totally new to Integration Services.
I have a flat file that I reference to get a date that I use in some SQL statements in the package. It seems like the best way to do this would be to create a variable to hold the date and set it at run time from the flat file. I've been searching the documentation and the forum and can't figure out how to do this. This is so basic that I feel like an idiot putting it on the forum but I need some help. This whole Integration Services thing is a big shift from DTS (which I eventually became pretty good at) Now I'm back to ground zero.
Any help would be appreciated. If you can direct me to any basic training resources that would be cool too.
I am trying to make a SSIS package that will loop trough all files in a directory and load information from them.
I can do this with Raw File Sources since they allow me to use a variable name as the file path, but I cant seem to do the same with Flat File Sources. Is there a way to change the connection to a Flat File Source on each iteration of a loop? Actually, if this is possible with all types of file sources (like excel files) I would love to know about it too.
I was thinking about renaming the file through a script task but that does not seem like the most elegant solution so decided to see if some one here knows of a more proper way before I go that direction.
I have a table that holds in each record an image (varbinary(max) actually), a text reference for the image and a MIME type for the image. I need to read this table and for each record that has been created since the last run, I need to create a file with the image as the content, the mime type as the file extension and the text reference as the file name. There will be one file created per record found by the data flow source.
I was assuming that I could use the flat file destination and manipulate the file naming using the contents of each record in the flow but am completely stumped on how to achieve this.
Does anyone have any ideas?
thanks
We have a flat file format generated from a vendor. It contains a "mainframe" view of the data with a header record, batch header record, detailed records, batch trailer record and trailer record. It arrives as a .dat file. What is the best approach to extract the necessary columns out of this file to populate the corresponding SQL server tables and rows?
View 3 Replies View RelatedI am currently working on project where I need to insert, delete and update data from a text file I receive into multiple tables. So the file has multiple recordset types(50 to be exact) and each record has a a code to perform an -Update, Insert, or Delete to the destination table. Also when I receive the records they are not sorted. I need to sort the sets for each destination table and then read the the sorted set sequentially and perform the correct action.
Currently I am importing the record via flatfilesource into one column. I am using a script component here that would consist I guess 50 outputs including the fields needed for each table. The outputs are sorted by sortkey field and when I add the record to the output I perform data type transforms needed for each field(most are strings but I need to convert some dates, numbers ect..).
***is there a better way of accomplishing this?***
(ps. I could use the conditional split and the derive column into the 50 different table but it was giving me errors that were almost forcing me to use a nvarchar type instead of a varchar type during some of the field transformations.)
At this point I would need to read through each of the outputs sequentially and perform the update, insert or delete into the needed table. Would I have to create 50 script components with an ADO.net recordset adapter to update the tables for each of the outputs? I am hoping you can help come up with a better way to accomplish all of this.
Also if I do need to update the tables with the script component could someone point me to an example of how to programmatically accomplish that. Thanks for any help of suggestions that you may provide as I am feeling kind of stuck.
Hi,
I'm relatively new to SSIS and I've been tinkering with the XML and Flat File sources.
I noticed that in the XML source it is possible to tell SSIS to read the XML data from a variable. I didn't see a similar option for the Flat File source.
Does anyone know if it is possible to read flat file data from a variable when using the Flat File source?
Thanks,
-dhideal
Hi,
Here is my problem :
I work on a SSIS package with SQL SERVER 2005
I need to extract data from a table and put these data in csv files
But... the flat files name should be dynamic and assigned by a variable ...
Here's an example of my table :
Column header :
Id, Name, Number
1 TOM 22
2 TOTO 44
3 SAM 44
4 RADIO 55
I expect to have 3 csv files :
USER_22.csv
USER_44.csv
USER_55.csv
for example : USER_44.csv contains :
2;TOTO;44
3;SAM;44
if there's 50 different number, i expect 50 files
can i do that in a dataflow ?
thanks for answering
Hi,
I've just started looking at SSIS and have encountered what should hopefully be a simple problem to solve. I have a pipe-separated source file that looks like this (I've added Line numbers for simplicity):
Ln 01: HDR|FEED_CODE|31-MAR-2006
Ln 02: Tom|100|Jones|ZZ1 1ZZ|USA
Ln 03: Tom|200|Singer|
Ln 04: Tom|305||Red|Porche ||Lanzarote |Apple|Carrot| | |
Ln 05: Dick|100|Van Dyke|ZZ1 1ZZ|USA
Ln 06: Dick|200|Actor|
Ln 07: Dick|305||Blue|Ford||California |Tomato | |||Beef
Ln 08: Harry|100|Houdini|ZZ1 1ZZ|GBR
Ln 09: Harry|200|Escapologist|
Ln 10: Harryk|305| |Green ||Triumph |Poland|Banana|Sprout| | |
Ln 11: TRL|9
In addition to a header and footer records, this file contains three record types for each person.
Record types are identified by the second column.
Each record type has a different number of columns:
Type 100 has 5 columns
Type 200 has 4 columns
Type 305 has 12 columns
The Row delimiter for all records is the {CR}{LF} character
I've set up a flat file input source and specified {CR}{LF} as the row delimiter for both header and data rows and the "|" character as the field delimiter.
It appears that SSIS is assuming that because the first data row has 5 columns, then everything must fit that format too. So the {CR}{LF} character that separates lines 02 and 03 is interpreted as text rather than a separation character and all remaining | field separators after 305 are interpreted as text containing in the fifth column. SSIS is also complaining that the last row is incomplete.
A bit like this (I've used tildes to indicate column separation):
Tom~100~Jones~ZZ1 1ZZ~USA
Tom~200~Singer~{CR}{LF}Tom~305||Red|Porche ||Lanzarote |Apple|Carrot| | |
I've seen one other reference to this behaviour but the response seemed to be SSIS doesn't know which columns are missing. In this scenario, we don't have missing columns, rather, we have different types of record in a single file. in DTS I would effectively parse the file once for each record type thus:
if cStr(DTSSource("Col002")) = "100" then
DTSDestination("in_Name") = trim(DTSSource("Col001"))
...
Main = DTSTransformStat_OK
else
Main = DTSTransformStat_SkipInsert
end if
...not the most efficient solution I know but the load only runs once a month so this was an acceptable workaround.
DTS was never this fussy but I'm sure this is user error rather than an SSIS limitiion. Can someone please put me straight?
Many thanks,
Greg
I'm using SSIS to import seven flat files (each containing a different record type) into a staging database. This part was easy.
Now I need to export the records from all seven tables into a single flat file structured in a nested hierarchy using common keys. (This format is required by the vendor for loading data into a new system).
I could use some ideas on the data transformations needed to combine all seven record types into an hierarchical record set which can then be written to my Flat File Destination. I'm currently looking at an article on SLQIS.com ("Handling Different Row Types In The Same File") which seems close to what I need, but they are importing (ref: www.sqlis.com/54.aspx ). I'm not sure if I should just reverse this for export or use something different. Any comments are appreciated.
Diagram of Record Hierarchy
typeA (parent key, ...)
typeB1 (parent key, childSet key, date, ...)
typeB2 (parent key, childSet key, ...)
typeC (parent key, childSet key, ...)
typeD (parent key, childSet key, ...)
typeE1 (parent key, childSet key, date, ...)
typeE2 (parent key, childSet key, ...)
The record types B1 through E2 form a complete set. Each set has it's own unique child-set key. There may be one or more sets for each typeA record (although it's possible that typeE records don't exist in the most recent set).
I am working on an SSIS project where I create two flat files for submission to a data contractor. This contractor requires a control record be the first line in the file. I create the control record based on the table information being exported.
What I would like to know is, is it possible to utilize the Header Section of the Flat File Destination Editor to insert the control record? And, as it is dynamic, what kind of coding must I do in order to utlise this functionality?
Thanks.
I have a few flat files that will be retrieved from some SFTP server. One of the flat file will act as a terminal file where it will specify the total number of records expected in each other the flat file.
Data in the terminal.txt
FileName TotalRecords
File1 1000
File2 1500
File3 2000
So, before transforming the data from the flat file sources into the target destination, i wish to do a row count checking for each of the flat file source to make sure that the number of records in the flat file source is tally with the number of records specify in the terminal.txt file. I'm able to get the number of records in each of the flat file by using the RowCount component but don't know how to get the data out from the terminal.txt file in order to make a rowcount comparison.
Can any1 help me on this? Or is there any other way we can do to make sure that the flat file source is alright before proceeding with the data transformation task?
Thanks!
Hi
I'm used to DTS but new to SSIS. What's a good reference/tutorial that deals with transforming columns of data (from a flat file) from one format to another when uploading into SQL2005? Typically columns of data have "" around the values and spaces that I want to remove.
Presumably in SSIS I need the following:
A Data flow task containing:
Flat file source
Derived or Copy Column?
OLE DB Destination
Is this on the right track?
Thanks
Gerry
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
I'm doing a simple ETL that reads a database table and dumps the content to a text file. The text file will be named Employee.txt. This file name will remain the same across my environments, but I may want to vary the directory location to where I want this file dumped.
So, I defined an environment variable called "DataTargetDir" in all my environments. Now, I want to utilize this variable in the "File name:" box within the Flat File Connection Manager Editor. How do I do this? I'm thinking I can write something like "%DataTargetDir%Employee.txt" in the "File name:" box, but it's not working.
Am I approaching this the right way?
Hi-I have a sql database (2005) that I need to extract a report from that looks somehintg like SELECT * From Empl_Hours WHERE some_flag <> 'true' .The thing works fine, but the problem is this: I need to insert a record in the 1st row that looks like "Static_text"+row_count() +"more_static_text"where row_count is the actual # of rows that were retrieved. Thanks in advance for any help.DAn
View 3 Replies View RelatedI have a simple package, which reads a flat file source, does some transformation, and outputs to a flat file destination. The package runs as a SQL Agent job, so I have the flat file source and OLEDB connection ticked and configured on the data sources tab.
What I would like to do is get hold of the flat file source connection string property from inside the package at run time, and use it to set the flat file destination connection string using property expressions.
The easy option is to set the destination in the agent job, but I'd like to add a date/time stamp to the destination filename.
Is this possible?
Thanks,
Greg.
Hi,
I tried to follow the widely talked about method to dynamically populate the connection string property of my flatfileconnection manager from a variable. I keep getting the following non-fatal error.
TITLE: Microsoft Visual Studio
------------------------------
Nonfatal errors occurred while saving the package:
Error at Package [Connection manager "FFCM"]: The file name ""C:ProjectsSSISHLoadTOutputOut.csv"" specified in the connection was not valid.
Error at Package: The result of the expression "@[User::CsvFullFileName]" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
Here is what I am trying to do.
I have a foreach loop that iterates through a list of xml config files and reads the config information including the destination csv file name and does a data transformation.
So I created a flatfile connection to a csv file did my data mappings.
Created a package level variable to hold the destination file path
In the Flat file conn. manager's properties -> expression -> set the @[User::CsvFullFileName] (which even evaluates fine)
When I try to run the package I keep getting the above mentioned non-fatal error..I checked the path and it is valid. I even tried
the c:\projects\...notation and the UNC path notation...all seem to give the same error
Anyone experience this before ? any thoughts would be appreciated.
Thanks
Guys
Another question regarding the frustrating SSIS stuff. Basically when I used to use a DTS task to import a flat file (comma delimited) into the database it worked fine no problems, however, for some reason the same approach in SSIS means that any string values in the file are automatically delimited with double quotes, even though I am specifying <none> as the delimitation. I have also changed the fields so that the the TextQualified is set to false.
This causes a problem because all of the information stored in the database (done by a stored procedure) contains these stupid quotes.
Is there something I am missing or haven't done correctly to get rid of the quotes
Thanks
D
I have a requirement wherein I have to setup the flat file connection manager to accept columns on fly. Meaning I want to retrieve list of columns/column count from the database when the package is run and set the connection manager with those many columns.
View 6 Replies View RelatedHi,
I am migrating one of my DTS package to SSIS.
My task is to read the filename from a database table and transfer the flat file data in to a table.
In SSIS,I am able to fetch the file name using a Data Reader Source; but how to pass this fileName parameter to Flat File Source ?
In DTS I have used ActiveX script to pass filename variable as flatfilecon.Source.
Any help ?
Thanks,
Ravi
Public Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64
[code]...
Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.
SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:
I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."
I am writing a package that will process delimited flat files that will come in one of a few different versions. Within each flat file, the number of delimited columns will be the same, but each version of the file has a different number of columns. I have tried configuring the flat file data source to expect the version with the largest number of columns, but it will then throw away rows that have less than this number of columns (warning: There is a partial row at the end of the file).
Is it possible to use a single flat file data source that will work with all of the different width files?
I have a flat text file with lots HTML tags and corresponding valuesÂ
For exampleÂ
<Near_Side> 5563 </Near_Side>
<Top_Down_Code> Xe345 <Top_Down_Code>Â
So, For example I can use the a functionÂ
ALTER function dbo.StripHTML( @text varchar(max) ) returns varchar(max) as
begin
  declare @textXML xml
  declare @result varchar(max)
  set @textXML = REPLACE( @text, '&', '' );
[Code] ...
To which Select dbo.StripHTML('<Near_Side> 5563 </Near_Side>')  ValueÂ
I'll get 5563
However how would you get the values within the tag itself ? E.g.Â
Value NameÂ
5563 Near_side
Xe345 Â Â Â Top_Down_Code
I was thinking along the Charindex but cant seem to get it right.
I am creating one SSIS package where my source is oracle. I have transferred the data from Oracle to flat file as per client requirement.I have to create single package for 2 country 1 is US and another is CANADA Columns are below
ZONE_ID,
ZONE_NAME
Zone Id having data like 10001,10002,10003,20001,2002,2003
Where zone_id start with 1000 is US Zone and Zone_Id start with 2000 is Canada Zone.
For US:
1. Load geography data from DB tables into flat files
2. Load geography data from flat files to Spectrum DB tables
For Canada:
1. Load geography data from DB tables into flat files
2. Load geography data from flat files to Spectrum DB tables
Now I want to look from flat file if Zone_id start with 1000 then it must go to US_DFT and if Zone_id start with 2000 then it must go to CANADA_DFT.
Any suggestions on a means to capture a pipe delimited flat file that contains different record types, each with their own layout...
Type1|field1|field2|field3
Type2|field 1
Type3|field 1|field2
Type1|field1|field2|field3...etc
Thanks!
Hello.
I have packages that must generate log errors dynamically including time of execution and the name of the task.
I make it changing the properties of the connection inserting two expressions.
1.-I alter the File Usage Type to 1 to generate this files.
2.- I alter the connection string as: @[User::myvariable] +"constant_description"+ time description+ +".txt"
The time description is :
(DT_STR,40,1252) DAY (GETDATE())+"-"+(DT_STR,40,1252) MONTH( GETDATE())+"-"+(DT_STR,40,1252) YEAR( GETDATE())+" + REPLACE( (DT_STR,10,1252) (DT_DBTIME) GETDATE(),":","_")
But it is not the problem
In those packages I have one connector for all the tasks and in execution time it creates one file for each of the tasks.
The problem is the way I insert in the filename the task name.
I have a pre-execute event handler in each task that modifies a string variable( myvariable) appending the task name. When I execute de package it works great but when I only execute a task, the program do not enter in the event and do not put the task’s name.
How can I put that name without using that handler? There is another handler can I use to do it that happens before the system generates the new file name and after pre-execute? Anyone knows another way to do this kind of things?