hi in my package, some sql operations need the special user name and admin privilage. so how do i create my ssis package so that when it executes it takes the given username and password from the table in some database.
View 8 RepliesIn my Script Component properties I have included "ClientReportGroupId" as a ReadWrite variable. This variable is declared as a Package Variable.
View 23 Replies View RelatedI have a Data Flow Script Component(Destination Type) and in the properties I have a read/write variable called User::giRowCount
User::giRowCount is populated by a Row Count Component previously in the Data Flow.
After reading http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=97494&SiteID=1 it is very clear that you can actually only use variables in the PostExecute of a Data Flow Script Component or you will get an error
"Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute."
What I need to do is actually create a file in the PreExecute and write the number of records = User::giRowCount as second line as part of the header, I also need to parse a read/write variable such as gsFilename to save me hardcoding the path
(Me.Variables.gsFilename.ToString),(Me.Variables.giRowCount.ToString)
-they must go in the PreExecute sub --workarounds please-here is the complete script component that creates a file with header, data and trailer --Is there any workaround
Thanks in advance Dave
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports System.Text
Imports System.Configuration
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
'Dim fs As FileStream
Dim fileName As String = "F:FilePickUpMyfilename.csv"
'Dim fileName = (Me.Variables.gsFilename.ToString)
Dim myFile As FileInfo = New FileInfo(fileName)
Dim sw As StreamWriter = myFile.CreateText
Dim sbRecord As StringBuilder = New StringBuilder
Public Overrides Sub PreExecute()
sbRecord.Append("RECORD_START").Append(vbNewLine)
End Sub
Public Overrides Sub ParsedInput_ProcessInputRow(ByVal Row As ParsedInputBuffer)
sbRecord.Append(Row.ProjectID.ToString)
sbRecord.Append(Row.TransactionRefNum.ToString)
sbRecord.Append(Row.BillToCustomerNum.ToString)
sbRecord.Append(Row.BillToAccountNum.ToString)
sbRecord.Append(Row.BillToLineNum.ToString)
sbRecord.Append(Row.BillToReassignmentNum.ToString)
sbRecord.Append(Row.ChargeCode.ToString)
sbRecord.Append(Row.NotificationMethod.ToString)
sbRecord.Append(Row.AdjustmentAmount.ToString)
sbRecord.Append(Row.AdjustmentDate.ToString)
sbRecord.Append(Row.ReparationGivenFlag)
sbRecord.Append(Row.BillingSystemProcessingErrorCode.ToString).Append(vbNewLine)
End Sub
Public Overrides Sub PostExecute()
sbRecord.Append("RECORD_COUNT").Append((vbTab))
sbRecord.Append(Me.Variables.giRowCount.ToString).Append(vbNewLine)
sbRecord.Append("RECORD_END").Append(vbNewLine)
'Now write to file before next record extract
sw.Write(sbRecord.ToString)
'Clear contents of String Builder
sbRecord.Remove(0, sbRecord.Length)
'Close file
sw.Close()
End Sub
End Class
Has anyone got a workaround
thanks in advance
Dave
I have following requirement. From OLE-DB source I am getting IDS. Then lookup with some master data. Now I have only matching IDs. Now I need find some filed(say Frequency from some table for each above id). I already write stored procedure for same where I am passing ID as parameter.Which is working fine when I run it SQL server management studio.
Query is sort of
Select field1,fiel2... from table 1 where id = @id
@id is each ID from lookup
Now I want to call this stored procedure in Data flow. I tried it using OLE DB command but it did not return output of stored procudre. I am getting output same what ever I am passing input.
Is there way to do this? In short my requirement is execute parametrized select statement using data flow trasformation component.
Ok so I have a SQL server database set up and I can't figure out how to create the spot where the user's login password should go and also what the specifics of the password column should be.....and yeah....all help is appreciated
View 3 Replies View RelatedI would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedI have some "Execute T-SQL Statement Tasks" in a package. I would like to run this same package on another SQL Server without having to change it on the other server. Since the server name can be given when setting up the connection, I think if I leave the server name out then the package could run on any server? Is my assumption correct?
View 10 Replies View RelatedHi all...
I'm creating a SSIS in the designer view of SQL Server BI Dev. Studio (SQL Server 2005)
I need to import a whole table from MS Access into my local SQL Server.(this task will be performed weekly, so once working I'll schedule a job for it)
I've created a 'FILE' connection to MS Access in the 'Connection Managers'.
When I'm on the 'Data Flow' tab I can't find a Data Flow Item to use as a MS Access connection.
(available on the 'Data Flow Sources' are only: DataReader, Excel, Flat File, OLE DB, Raw File and XML Sources)
What am I doing wrong/missing?
Thanks for your help.
Hello.
I am using the "SSIS Log Provider for SQL Server" to log events to a table for "OnError" and "OnPostExecute" events of a package. This works as expected and provides a nice clean output on the execution steps of the package.
I am curious as to why I do not see any detail for any/all tasks that fall under the "Data Flow" section of the package though. For instance, on my "Control Flow" tab, I added a "Data Flow" task that simply loads a few tables from a target to destination server. However, there is nothing shown in the logging output. Just that a Data Flow task was initiated. And when I'm configuring this logging under "SSIS-->Logging" in the checkbox area on the left, you cannot "drill into" data flow steps.
Is there a reason why there is no detailed logging for Data Flow tasks? Would getting to that require me to create a custom log provider?
Thanks for the help.
Greg
What are the advantages and disadvantages of having multiple data flow tasks in one SSIS package?
Is this a good idea at all considering the workflow may be similar now but may change in the future? Should it be left as one data flow per package?
I am using SSIS to populate a star schema.
The issue is in the data flow for loading and setting the Fact table dimension keys (the dimensions are all loaded fine). After 16 rather pedestrian Lookup Transformations, I have an escalating problem adding additional Lookup transforms to the Data Flow. The problem is not in execution; the problem is adding more transforms in design mode.
Lookup # Fields in Data Flow Time to validate that lookup
<17 47 Sub-second
17 48 2 sec
18 49 4 sec
19 50 8 sec
20 51 16 sec
21 52 32 sec
22 53 64 sec
While I€™m intrigued by the mathematical progression that is forming here, the issue is that I have at least 6 more Lookups to perform. I hope you can see my dilemma.
I have gone to where it takes a little over 4 minutes each to validate the lookup transform and its associated Derived Column transform and Union transform (Total 12 Minutes). Not only does this add up to many idle minutes to each design step, BUT it breaks the debugger as it pre-validates the ENTIRE data flow before it ever switches into debugging mode.
Some notes:
1. It doesn€™t matter what order the Lookup transforms occur in, the timings are exactly the same.
2. I tried many Data Flow execution optimizations, but they don€™t improve the validation times (or even get a chance to improve the execution times!)
I realize this may be somewhat of a unique problem.
Thanks for any help you are able to lend.
-Dave
I created a SSIS package and several data flow componenets for this package.
What does strategy exist to deploy SSIS package and data flow components into a enterparise server?
Thanks in advance.
We're experiencing a problem where intermittently our SSIS packages will hang. There are no log errors or events in the event viewer. It will happen whether the package is executed from the SQL Job Agent or run from BIDs. When running from BIDs it appears to hang inside one of the data flows (several parallel pipes with sorts, merge joins etc...). It appears to hang in multiple pipes within the data flow component. The problem is reproducable, we just kill it and re-run, and it appears to hang in the same places.
Now here's the odd thing: as we simply open and close some of the components in the pipe line after the place it hangs, a subsequent run will go further in the pipeline before hanging. If we open and close all the components after the point it initially hung, the data flow will run fine, from there on out. When I say "open and close" I mean no changes are made, we simply double-click the component, like a merge join, then click 'close.'
To me this does not seem like a memory problem but likely something is wrong with the metadata, where opening a component and closing it somehow alters the metadata to "right it".
This seems to occur intermittently after we make modifications to the package. It's like if you make any mod, even unrelated to the data flow, you then have to go through and open and close every component in your package to ensure it will work. Again, no errors or warnings are fired.
Has anyone seen this type of problem?
Hi
I need to create a trigger that whenever there is data found in a certain table it must execute a SSIS package. If there is a process in SSIS or a way to manipulate the process to check if there is data and then schedule the package that would also help.
What i've done:
I have an SSIS package that searches for data in a table, copies the data into a flat file and places the file onto a FTP server, which it then renames the file so that the server will accept the flat file once it's in a specific folder, after that it moves the data from the current table to a stage table and truncates the current table.
The Problem:
When there is no data in the table, it creates a 0 bytes file that it puts onto the FTP server which messes things up on that side. All i want to do is put a check on the package to see if there is data before it executes.
Any help or even the slightest bit of information would be of great help.
Kind Regards
Carel Greaves
Hi There,
In SSIS package development environment, I was able to connect to an oracle database and pull data into my sql server database. I installed the client tools for oracle and I put an entry into the tnsnames.ora and I was able to connect.
But in production environment, if I deploy the package on sql server, I was wondering if I had to do the same job of downloading the oracle client tools onto my production machine --which creates a tnsnames.ora file to it default location and then edit it with tthe tns entry-- or is there a better way to do this--avoiding the download?
Can somebody plzz help me ?
Thanks.
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
HiI have a Platinum database which stores dates in integer form e.g the dateis formatted as below:Column_name Type Length Precision------------------------------ ------------------------------from_date int 4 10Some of the dates in the Platinum database are as follows:729115729359730059730241730302730455How can I bring them into SQL 2000 as valid dates.Thanks for your assistanceSam CJoin Bytes!
View 1 Replies View RelatedHi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
SSIS Newbie Question:
I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.
My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.
How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.
Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?
Seems like this would be a common task...
Steps:
1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow
Can someone help me with this?
Signed: Clueless with a deadline approaching...
I have a package (PackageA) with an Execute Package Task that execs PackageB. When I run PackageA I get this error on the Execute Package Task :
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
PackageB has 'EncryptSensitiveWithUserKey' ProtectionLevel. I'm providing passwords in the dtsConfig so I'm guessing I should change it to 'DontSaveSensitive'?
Interestingly, PackageA also has 'EncryptSensitiveWithUserKey' ProtectionLevel, but I don't get an error about PackageA, just on the task that runs PackageB.
(SP1 is installed).
Hi friends,
The problem that i am facing right now is that I have to show progress bar in my vb front end Application code which call my package using the
Application.LoadPackage(pakage Nothing).
What i am intending is that , I pass my progress bar instance to Package object and as the package executes, I
am changing the progress bar value to reflect the progress of execution.
Please Help ME.. with ur valuable responses
Regards
Maheswar
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I am writing an ASP.NET intranet application on a Windows XP machine running IIS 5.1 which executes a MS SQL Server 2000 DTS package as part of the process. The application allows the user to select a UNC path of an input source (.txt) file to be procesed by the DTS pacakge and the UNC file path property is then set in the source object name of the DTS package tasks before executing the DTS package. Whenever I run the application using a file path that is on my development machine (the same machine that the web server is on) it works fine. When I select a source file path that is on a network share folder, the DTS package fails with the following error:Event Type: ErrorEvent Source: DataTransformationServicesEvent Category: NoneEvent ID: 81Date: 2/14/2007Time: 12:58:06 PMUser: N/AComputer: PHILSDELL2Description:The execution of the following DTS Package failed: Error Source: Microsoft Data Transformation Services (DTS) PackageError Description:Package failed because Step 'DTSStep_DTSDataPumpTask_2' failed.Error code: 80040428Error Help File:sqldts80.hlpError Help Context ID:700Package Name: ATMRecon_ImportElanACHTxtPackage Description: (null)Package ID: {3A8CC31D-A81F-40B7-BE57-AEB3AA238088}Package Version: {B01420A7-ED22-49A7-B4C7-9FA1732394E3}Package Execution Lineage: {2A9D45E8-35F8-4F0A-8339-7E5E29DA08B7}Executed On: PHILSDELL2Executed By: webaccess23Execution Started: 2/14/2007 12:58:05 PMExecution Completed: 2/14/2007 12:58:06 PMTotal Execution Time: 1.047 secondsPackage Steps execution information:Step 'DTSStep_DTSExecuteSQLTask_1' succeededStep Execution Started: 2/14/2007 12:58:05 PMStep Execution Completed: 2/14/2007 12:58:05 PMTotal Step Execution Time: 0.047 secondsProgress count in Step: 0Step 'DTSStep_DTSExecuteSQLTask_2' succeededStep Execution Started: 2/14/2007 12:58:05 PMStep Execution Completed: 2/14/2007 12:58:05 PMTotal Step Execution Time: 0.047 secondsProgress count in Step: 0Step 'DTSStep_DTSDataPumpTask_1' failedStep Error Source: Microsoft Data Transformation Services Flat File Rowset ProviderStep Error Description:Error opening datafile: Logon failure: unknown user name or bad password.Step Error code: 80004005Step Error Help File:DTSFFile.hlpStep Error Help Context ID:0Step Execution Started: 2/14/2007 12:58:05 PMStep Execution Completed: 2/14/2007 12:58:06 PMTotal Step Execution Time: 1 secondsProgress count in Step: 0Step 'DTSStep_DTSDataPumpTask_2' failedStep Error Source: Microsoft Data Transformation Services Flat File Rowset ProviderStep Error Description:Error opening datafile: Logon failure: unknown user name or bad password.Step Error code: 80004005Step Error Help File:DTSFFile.hlpStep Error Help Context ID:0Step Execution Started: 2/14/2007 12:58:05 PMStep Execution Completed: 2/14/2007 12:58:05 PMTotal Step Execution Time: 0.031 secondsProgress count in Step: 0 When I check the Security Event Log on the server on which the network share is located, I find the following set of messages repeated multiple times:Event Type: Failure AuditEvent Source: SecurityEvent Category: Account Logon Event ID: 680Date: 2/14/2007Time: 1:02:48 PMUser: NT AUTHORITYSYSTEMComputer: FS1ADescription:Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: ASPNET Source Workstation: PHILSDELL2 Error Code: 0xC000006AEvent Type: Failure AuditEvent Source: SecurityEvent Category: Logon/Logoff Event ID: 529Date: 2/14/2007Time: 1:02:48 PMUser: NT AUTHORITYSYSTEMComputer: FS1ADescription:Logon Failure: Reason: Unknown user name or bad password User Name: ASPNET Domain: PHILSDELL2 Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: PHILSDELL2 Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 10.120.4.61 Source Port: 0The problem appears to be that the DTS package is trying to access the input source file using the local ASPNET Id from PHILSDELL2 which does not have authority to the network share. The ASP.NET application is using impersonation, set up through the web.config file: <identity impersonate="True" userName="registry:HKLMSOFTWARESkylightATMReconidentityASPNET_SETREG,userName" password="registry:HKLMSOFTWARESkylightATMReconidentityASPNET_SETREG,password" />The application can sucessfully access the network share under the impersonated id (the application first verifies the existience of the source files before executing the DTS package). I have wracked my brain trying to determine where the ASPNET security context is coming from to no avail. Can someone shed some light on what security credentials the DTS package is using to access the source files and how to change them?
View 1 Replies View Related
Hello,
I want to know detail execution flow of SSIS package (like Validation -> Expression evaluation -> Execution etc.)
Where can I get detail information, any reference (links)?
Thanks in advance.
-Omkar.
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
Hi Everyone,
In the data flow task, i have thosands of rows flowing, now just before inserting these rows into a table, i want to delete some rows in the destination table. For this, if i use the oledb command, then it will run several times. I think a script can do it but I want to avoid it because it would be an inefficient affair.
Please post your suggestions on this.
Regards,
Manu
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
stupid question time...
how do i add a password (ie, what is the exact wording) to the CommandLine in a SQL Agent Job that is running an SSIS package from the File System, pls?
Here is the CommandLine as I currently have it:
/FILE "\dbase01c$SSISPackageDeployment vrscanus_process_uploadscanus_process_upload.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
I have tried /PWD and /pwd and /PASSWORD already. For these, SQL Job says they are not valid commandLine parameters.
thanks/spirits,
seth j hersh
We have changed NT Administration Password. Now how to reassign the new password setting for sql server service account. As right now all schedule jobs are getting failed & needs to be executed manually.
Thanks in Advance
Manoj
I have a package that used to work fine, but after I imported it into a different existing solution and tried to run it, it always stalls during the data flow task at the very end.
It will run through and process all the rows and insert them into the destination except for the last chunk. The task blocks eventually all turn green as well, but then it never proceeds to the next task after the data flow. Looking at the Progress tab for the data flow task, I get the following:
Progress: Pre-Execute - 100 percent complete
[DTS.Pipeline] Information: Execute phase is beginning.
[DTS.Pipeline] Information: Post Execute phase is beginning.
Progress: Post Execute - 0 percent complete
Then it just stays at 0 percent for Post Execute. The program doesn't hang or anything, it just doesn't progress at all. I also just checked and I run the package from its original solution and it is now exhibiting the same behavior as well.
Any ideas what might be causing this or something to do to try and figure it out or at least get more information about what might be causing it?
Thanks.
I have a fuzzy lookup in a data flow but this data flow never gets pass pre-execute phase. What is the problem?
Thanks
Hi. I am trying to extract the data returned from a store procedure to a flat file. However, it fail to execute this package in the OLE DB Source.
I select the SQL Command in the Data Access Mode, then use:
USE [SecurityMaster]
EXEC [dbo].[smf_ListEquity]
It runs ok in the Preview, but not in the Run. Then the system returns during executing the package:
Error: 0xC02092B4 at Load TickerList, OLE DB Source [510]: A rowset based on the SQL command was not returned by the OLE DB provider.
Error: 0xC004701A at Load TickerList, DTS.Pipeline: component "OLE DB Source" (510) failed the pre-execute phase and returned error code 0xC02092B4.
Please give me some helps. Thanks.