1 20031012121212 200 (recordtype, CreationDateTime(YYYYMMDDHHMISS), Rec_Count) -- Header records
2 ABCD, XYZ, 9999, 999999999, 1234 ---- Detailed Record
2 ABCD, XYZ, 9999, 999999999, 1234 ---- Detailed Record
For the above given sample data I am having two outputs at Condition Split (based on the recordtype). I want to store the 1st record datetime value into a variable and then I want to use that variable value into 2nd and 3rd row.
Basically, detailed records would be stored into the database not the header record. Is there any way I can use the variable while doing processing for 2nd and 3rd records.
'check to see that student num is in the db Dim connect as SqlConnection Dim strSelect as String Dim cmdSelect as SqlCommand Dim strDbResult as SqlDataReader
connect = New SqlConnection(connStr) strSelect = "SELECT stu_num, stu_fname, stu_lname FROM " + stuTable + " WHERE stu_num=@stuNum" cmdSelect = New SqlCommand(strSelect,connect) cmdSelect.Parameters.Add("@stuNum", txtStdNum.text)
Dim stuFName as String Dim stuLName as String Dim stuEmail as String Dim strRandom as String Dim strPassword as String Dim i as Integer Dim charIndex as String Dim stuMailMessage as MailMessage Dim strHTMLBody as String
In my DB I have a table with the columns stu_num, stu_fname and stu_lname. Each of these columns contains rows with data. However, the proceeding code gives me this error: Invalid attempt to read when no data is present (line 58 --> stuFName = strDbResult("stu_fname") ).
What am I doing wrong here? How do I assign the stu_fname in the DB to the page level variable stuFName?
As a little aside how do I say "If no record was found matching stuNum Then" ... ??
I have a typical scenario here where I am trying to assign a variable a value using another variable, for that I am using two execute SQL task , the fisrt one assigns the first variable a value and then the second one uses the first variable to evaluate and then assigns a value to another variable. The first execute sql task works fine , however the second one fails with the following error
"failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_I4)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. "
Here is the query I am using to assign the value in my second execute sql task
select (CASE
WHEN Sum(col1) <> 0 AND ? = 'M' THEN 'M'
WHEN Sum(col2) <> 0 AND ? >= 'T' THEN 'T'
WHEN Sum(col3) <> 0 AND ? >= 'R' THEN 'R'
ELSE 'S'
END) as Current
FROM dbo.TABLE1
I am passing the variable by mapping the parameters and then assigning the value using a single row result set. Can someone please tell me where am I going wrong?
Hello! I'm using SQL Server 2000. I have a variable which contains the name of another variable scoped in my stored procedure. I need to get the value of that other variable, namely:
CREATE table #myTable(value VARCHAR(20)) INSERT into #myTable values('@operation')
SELECT top 1 @parameterValue = value from #myTable -- Now @parameterValue is assigned the string '@operation' -- Here I need some way to retrieve the value of the @operation variable I declared before (in fact -- another process writes into the table I retrieved the value from), in this case 'DIS'
DROP TABLE #myTable
I've tried several ways, but didn't succeed yet! Please tell me there's a way to solve my problem!!!
Hi I'm new to SQL and I'm trying to build a store procedure. What I'm trying to find out is how to assign a variable a value from a table.
So, I declare a variable: DECLARE @variable int Then I want to assign a single int value to that variable that is already in a table. For instance the id value from a single row in a table.
I've tried SELECT INTO and SET, but nothing has worked so far and I'm lost after searching for a few hours.
I would like to assign the value of a variable to a column name of a table. For eg:
declare @sam varchar(100) set @sam = 'Insert' create table #temp(Sample varchar(100) not null) insert into #temp(Sample) Values(@sam) drop table #temp
I would like to generate a table whose column name should be generated dynamically. The value of @sam that is "Insert "should be set to the column name. Is there a way to assign like this. Can anyone please help me in achieving this.
Hello all, for a project I am trying to implement PayPal processing for orders public void CheckOut(Object s, EventArgs e) { String cartBusiness = "0413086@chester.ac.uk"; String cartProduct; int cartQuantity = 1; Decimal cartCost; int itemNumber = 1; SqlConnection objConn3; SqlCommand objCmd3; SqlDataReader objRdr3; objConn3 = new SqlConnection(System.Web.Configuration.WebConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString); objCmd3 = new SqlCommand("SELECT * FROM catalogue WHERE ID=" + Request.QueryString["id"], objConn3); objConn3.Open(); objRdr3 = objCmd3.ExecuteReader(); cartProduct = "Cheese"; cartCost = 1; objRdr3.Close(); objConn3.Close(); cartBusiness = Server.UrlEncode(cartBusiness); String strPayPal = "https://www.paypal.com/cgi-bin/webscr?cmd=_cart&upload=1&business=" + cartBusiness; strPayPal += "&item_name_" + itemNumber + "=" + cartProduct; strPayPal += "&item_number_" + itemNumber + "=" + cartQuantity; strPayPal += "&amount_" + itemNumber + "=" + Decimal.Round(cartCost); Response.Redirect(strPayPal);
Here is my current code. I have manually selected cartProduct = "Cheese" and cartCost = 1, however I would like these variables to be site by data from the query. So I want cartProduct = Title and cartCost = Price from the SQL query. How do I do this?
Hello all, I'm creating a stored procedure in SQL Server 2000. I'm trying to count how many rows match a certain WHERE clause, and assigning this integer to a variable:
---------------- DECLARE @RowCount int,
SELECT COUNT(*) FROM Customers WHERE FirstName='Joe' ----------------
How can I assign the count that returns from the SELECT statement to the @RowCount?
I need some help regarding a conversion in a Script Task.
I am reading my variable values from a database with a sql task, the table has two columns, variable and variableValue. Looping through the recordset and setting the different variables works well, with two links: http://blogs.conchango.com/jamiethomson/archive/2005/02/09/SSIS_3A00_-Writing-to-a-variable-from-a-script-task.aspx http://sqlblog.com/blogs/andy_leonard/archive/2007/10/14/ssis-design-pattern-read-a-dataset-from-variable-in-a-script-task.aspx
setting the variable value only works well if the package variable is defined as string, because the db field is a varchar, trying to assign an integer for example brings up an error.
Therefor I tried something like CType: Dts.Variables("MyVar").Value = CType(MyRecordsetField,String), where the target datatype should be depending on the variable datatype instead of being assigned as a constant.
I have a smalldatetime field in a table that holds dates as 3/1/2008. If you run a select query on the field it will bring back the date as a datetime vairable. I reran the query using the following: select convert(varchar,cast((max(ENTRY_DTE))as datetime),101) This query brings me back the date as 03/01/2008.
When I utilize the same query and set the value to a declared variable, defined as datetime, it brings me back the date as : Mar 01 2008 12:00AM
I have tried several different ways to convert the date however as soon as appoint it to a declared variable I receive the same result!!
I've asked this question before and I've read the answers before and I still cannot get it to work. My task is simple, I want to use the execute sql task container to grab a value from a database and put it in a variable. I've done all the preliminary stuff such as running profiler to make sure that the package is getting the call to the database, setting up the ResultSet to be "single row" in the general tab, mapped the Result Set correctly, but nothing works. I get the same error every time.
This is my sql command:
select output_location as output_location from script_master
Result Set is set up like this:
Result Name: output_location ; Variable Name: User::output_location
Here is the error I get:
Error: 0xC002F309 at Execute SQL Task, Execute SQL Task: An error occurred while assigning a value to variable "output_location": "The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
".
I don't know what I'm doing wrong, I've followed all the instructions exactly on how to populate a variable in this container. My variable is set up as a string, if I change it to object I can get it to work. I think this is because the object is allowing nulls. I really believe that the variable is not populating and that is why I'm getting errors.
Please help. If you could provide step by step example's that would really make my day.
How to assign multiple values to emp1 variable separated by comma Ex: If ajay karthik vijay are employee names in emp table then emp1= ajay,karthik, vijay set emp1= (select employeename from emp) returns error error: subquery returns morethan one value
Okay, can I assign line x of a flat file to a variable, parse that line, do my data transformations, and then move on to line x+1?
Any thoughts?
In other words, I'm looking at using a for loop to cycle through a flat file. I have the for loop set up, and the counter's iterating correctly. How do I point at a particular line in a flat file?
Hi, I'm try to get the query second column value when it is assinged to a varchar variable. Ex:In SP below is statement I wrote SET @Values = (SELECT COL1,COL2 FROM TABLE) Question 1: How to access the COL2 value from @Value2? Question 2: How to access the other row values if above returns more than a row? Please send me the solution as soon as possible. Thanks-Vikash/Bala
In my SSIS package I am looping multiple flat file to load data into target table. I have used one variable to get that filename. I have error log table which used to log the invalid record which come from various files.
All are working fine , except I want to log the filename also in my error log table. How can we use the package variable to assign the variable value in script component.so that I can map the output column to target table. I have created Filename column in script component in output column tab.
The following works in query if I specify one student (PlanDetailUID) when running query. If I try to specify multiple students (PlanDetailUID) when running query, I get variable cannot take multiple entries. I assume I would need to replace (variables) in PART 2 with (case statements / using select everywhere) to get around the issue or is there a better way ?
I have a Data Flow Script Component(Destination Type) and in the properties I have a read/write variable called User::giRowCount
User::giRowCount is populated by a Row Count Component previously in the Data Flow.
After reading http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=97494&SiteID=1 it is very clear that you can actually only use variables in the PostExecute of a Data Flow Script Component or you will get an error "Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute."
What I need to do is actually create a file in the PreExecute and write the number of records = User::giRowCount as second line as part of the header, I also need to parse a read/write variable such as gsFilename to save me hardcoding the path
-they must go in the PreExecute sub --workarounds please-here is the complete script component that creates a file with header, data and trailer --Is there any workaround
Public Class ScriptMain Inherits UserComponent 'Dim fs As FileStream Dim fileName As String = "F:FilePickUpMyfilename.csv" 'Dim fileName = (Me.Variables.gsFilename.ToString)
Dim myFile As FileInfo = New FileInfo(fileName) Dim sw As StreamWriter = myFile.CreateText Dim sbRecord As StringBuilder = New StringBuilder
Public Overrides Sub PreExecute()
sbRecord.Append("RECORD_START").Append(vbNewLine)
End Sub
Public Overrides Sub ParsedInput_ProcessInputRow(ByVal Row As ParsedInputBuffer)
Public Overrides Sub PostExecute() sbRecord.Append("RECORD_COUNT").Append((vbTab)) sbRecord.Append(Me.Variables.giRowCount.ToString).Append(vbNewLine) sbRecord.Append("RECORD_END").Append(vbNewLine) 'Now write to file before next record extract sw.Write(sbRecord.ToString) 'Clear contents of String Builder sbRecord.Remove(0, sbRecord.Length)
I'm trying to create a custom data flow transformation, I need to set the value of a user variable which will be used by a downstream component(for example: a data flow destination) at runtime, is this possible? If possible, in which method should I do that? Thanks.
Hi, I am relatively new to SSIS. Please advice me on how to change the value of a variable during runtime. i.e. user should be able to key in the value.
I have a number of DTS packages I am trying to convert and am totally new to Integration Services.
I have a flat file that I reference to get a date that I use in some SQL statements in the package. It seems like the best way to do this would be to create a variable to hold the date and set it at run time from the flat file. I've been searching the documentation and the forum and can't figure out how to do this. This is so basic that I feel like an idiot putting it on the forum but I need some help. This whole Integration Services thing is a big shift from DTS (which I eventually became pretty good at) Now I'm back to ground zero.
Any help would be appreciated. If you can direct me to any basic training resources that would be cool too.
Can I design data flows with an XML Source pointing to file system xml files, and but run them against variables? I can see the properties at design time (Accessmode=0,1,2; XMLDataVar="User::XMLData), but the XMLSource object doesn't appear to have expressions enabled to change this at runtime, nor do these properties seem to be exposed to configurations.
The scenario:
I have a package that reads through (potentially thousands) of XML files, and having identified the embedded message "type", transforms them via XSLT to an easier XML format (XML Datasource can't cope well with multiple namespaces etc). Then send this the new file off to a type specific dataflow task to send contents to database.
For performance (and other) reasons I'd rather XSLT to a single shared variable and use this variable as the XML source in the data flows (Rather than writing out to the filesystem [via xslt] and immediately reading it back in each time [via datasource]).
But designing the data flow task using a variable as xml source is frustrating for a bunch of reasons - not the least being:
(a) The variable needs to be populated with sample xml data at design time. But this could only ever match one dataflow at a time (fine at run time, but painful at designtime - leading to validation errors popping up all around the place.)
Yes I could have a seperate variable for each xmlsource - but that just makes things more complicated up front and also leaves me with 20+ large, type specific, xml variables floating around at runtime of which only one is ever being used per import - which just doesn't feel right to me.
(b) populating the variable with sample xml at design time is painful due to it being a string - and not accepting hard returns etc that are in text files, design time changes etc)
Using a file XML source at design time is infinitely easier, when I get a design time change - I can just amend the XSLT and run the appropriate task to produce a sample XML file to design against.
All, I need to pass a variable to get source data from Oracle on OLE DB source. The variable is defined by an Execute SQL task (previous step) on the control flow and it is a package level variable. In the data flow, OLE DB source using €˜SQL command from variable€™. The variable sql command works when it just: Select *from table But I need the variable SQL command like this: Select * from table where last_modified_date > ? - - variable1 the variable1 is defined by anther Execute SQL task at runtime
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error: [Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
hello I have a problem with Sql task when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue." I'm using ODBC connexion for a csv file
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination. I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)