Attach Database Loses CLR
Sep 30, 2006
Hi
When I deploy a database (mdf and ldf) and attch the database I get errors when my stored procedures attempt to call CLR stored procs.
Error regards database trust and assembly safety etc. This works on my development system/database so it's setup correclty there.
Clearly I'm missing some additional setup when attaching the database to another server instance. Can't figure it out though. I'm marking the assembly UNSAFE (it requires network access) and the database as trustworthy when attaching but the error persists. Also making sure the server instance has CLR enabled.
What am I missing? Any ideas?
View 9 Replies
ADVERTISEMENT
Jun 17, 2006
After a period of use (typically 1-2 hours), an application using SQL Server Express stops writing to the database, whilst still continuing to read from it. As far as I can tell, no error message is generated by any operation. The application is written in VB Express and is executed on several machines, with SQL Server Express on a central machine. Re-starting the application on the affected machine restores normal operation.
The problem on one machine does not cause a similar problem elsewhere at the same time (hence it appears to be an issue with the relationship between the application and SQL Server)
This does not appear to relate to the response to Q asked by sgcook on 9 may as we are not using user instances, but only a bare minimum connection string.
View 15 Replies
View Related
Apr 30, 2015
we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies
View Related
Apr 23, 2006
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
View 1 Replies
View Related
Nov 21, 2007
An attempt to attach an auto-named database for file C:WebApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My web.config file, the connection strings
<connectionStrings>
<add name="POAdatabaseConnectionString1" connectionString="Data Source=sss;Persist Security Info=True;Initial Catalog=POAdatabase.mdf;Integrated Security=SSPI" providerName="System.Data.SqlClient" />
</connectionStrings>
I cann't really find the statement for attaching aspnetdb.mdf. I don't where to find it. Is there any other web.config file in the C drive? Thanks for help!
View 3 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Apr 22, 2006
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which the company says works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get an error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
View 3 Replies
View Related
Jul 20, 2005
If I detach a database on a server, then attach the database with asingle file only using the data file...will I lose any transactionsthat were in the original log file? There is a debate going on here atwork where some people think that during the detach, transactions inthe log file are saved to the data file.Thanks!
View 4 Replies
View Related
Dec 16, 2007
I've created a database inside my ASP.net project, the database is in the App_Data folder as exepcted.I can't run the aspnet_regsql until I have attached it using SQL Server Management Studio, but when I try to attach the database it doesn't let me navigate through my folders properly. The database is in C:UsersWardieDocumentsFirstProjectApp_Data but SQL SMS only lets me navigate to the folder C:UsersWardie and no further for some reason, meaning I can't attach the database and can't use the aspnet_regsql service to create the membership tables.Does anyone know how to fix this?
View 3 Replies
View Related
Nov 26, 2001
Hi guys,
I had user who would like attach trial database and de-attach database when he do development. I do not want him had any other permission except the database he attach. I give him database creator role. But it did not seems work. I have to give him database creator role and system admin role also. Any one have better ideas about this?
Thanks for help
Helen
View 1 Replies
View Related
Feb 16, 2006
Basically says chain linkage mismatch
Any way to fix this?
View 1 Replies
View Related
May 14, 2006
hi ,
i want to use a database that someone created in SQL SERVER 2000/WINDOWS SERVER 2003.My system is SQL SERVER 2000/XP SP2 PRO .The problem is that the database is an unknown file .I mean ,it isn't ,as usually, an .mdf or .ldf file ,so i cannot attach it to the server.
Is there a problem in compatibility between the different versions of windows?Or is missing something from the database?What can i do?
Thanx in advanced
View 8 Replies
View Related
Jan 31, 2007
I want to attach a database that one of the developers had detach it. The LDF file was deleted after detach.
I tried to attach and rebuild the log file in SQL2005 using the following:
USE [master]
GO
CREATE DATABASE [Test] ON
(FILENAME = N'G:MSSQLDataTest.mdf')
FOR ATTACH_REBUILD_LOG
GO
I get the following error:
File activation failure. The physical file name "D:MSSQLDATATest_log.LDF" may be incorrect.
The log cannot be rebuilt because the database was not cleanly shut down.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'Test'. CREATE DATABASE is aborted.
What should I do?
Thanks,
Canada DBA
View 20 Replies
View Related
Oct 14, 2006
I have a database on a server and want to put it my local laptop that also has sql express. I attached the db, I see it in Management Studio but it does not show up in
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData so my app is not working correctely. How do I get the db to show up in the MSSWLData folder. I'm a bit confused.
View 7 Replies
View Related
Dec 15, 2006
That's the error I get.Please help
'
TITLE: Microsoft SQL Server Management Studio Express------------------------------Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)------------------------------ADDITIONAL INFORMATION:An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)------------------------------C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLDataMyNewDB.mdf is not a primary database file. (Microsoft SQL Server, Error: 5171)
View 4 Replies
View Related
Jan 23, 2007
Hi,
I have a database that I developed using both Toad for SQL and SQL Server Managment Studio.
All was working fine. I could connect to the database with one of the above and also run two an applications I developed (one in C# and One in VB.NET using VS Express) using the standard SQLConnection class.
the following connection string worked fine...
Server="(local)"; Trusted_Connection="yes"; Database="CDEvolution";
Now, for one reason or another I decided to create a new data source in my Visual Studio project and pointed it to the database fine.
At first it seemed ok as I could see all tables from teh database. However somethign strage has happened. I now can't access the database in TOAD or SQL Server Managment Studio. I also couldn't connect using the above string.
I finally managed to get the two appllications I developed to access database using the following connection string...
Data Source=.SQLEXPRESS;AttachDbFilename=C:Program FilesMicrosoft SQL ServerMSSQLDataCDEvolution.mdf;Integrated Security=True;Connect Timeout=6000;User Instance=True;
and the applications work fine, however I can access the database using the DB tools.
In SQL Server Managment Studio I remove the database and tried to attach it again but I keep getting the following error message...Could not find row in sysindexes for database ID 5, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'C:PROGRAM FILESMICROSOFT SQL SERVERMSSQLDATACDEVOLUTION.MDF'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
Any ideas on how I can get access back?
Cheers in advance,
Kevin
View 6 Replies
View Related
Oct 29, 2006
Can not attach database,
Error message;
The file you've specified is not a valid SQL Server database file.
My costumer HDD some files Deleted mybe elektric prblem -Elektric
go,com,go,come- then windows not opened.
insert corrupt hdd Another computer, then recovering (recover my files
software)
Recover mdf and ldf files. but I can not not attach mdf. file,
I am recovery .mdf file http://www.officerecovery.com/mssql/ some table ok.
but my importand table is not ok.
if I can recover another recovery software , my database correct recover or
same.?
I am using RecoverMyFiles.
Pleace help me.
Thanks.
View 1 Replies
View Related
Jun 29, 2006
Hi,
We are trying to attach a Database from SQL7 to SQL2K SP3.
On SQL7
The Database was detached and the MDF copied to the New Server.
On SQL2K
We used the attach Db (in Enterprise Manager).
We get a red 'x' as normal against the logfile and noramlly it would create a new one when u proceed, but this time we are getting an error after the dialogue box asking to create a new one:
Error 1813: Could not open new database 'dbname'. CREATE DATABASE is aborted.
Device activation error. The physical file name 'd:mssql7datadbname.ldf' maybe incorrect.
The path is where the logfile resided on the old server.
Regards
John.
View 4 Replies
View Related
Oct 10, 2006
I've just created ASPNETDB database with ASP.NET Security. Now, I want to send this db to orther computer.First, I detached this db, then when I used attach database in that computer, there is an error :Error 602: Could not find row in sysindexes for database ID 8, object ID 1, indext ID 1. RUN DBCC CHECKTABLE on sysindexes. Please help me .Thank.
View 3 Replies
View Related
Apr 23, 2008
Hi to all, Is there any way to attach a database using query.
View 1 Replies
View Related
Apr 28, 2005
Problem is: "I am trying to attach a database through SQLDMO using VB6 In MSDE (Microsoft Sql Server Desktop Engine). If my '.mdf' and '.ldf' files are placed in a folder with Spaces then it give me error because it is picking up the folder name up to first space."
View 1 Replies
View Related
Jul 4, 2005
I have install SQLExpress, too I download AdventureDB, but it created files *.mdf and *.ldf.Now in SQLExpress I cann't attach database witch mouse, I believe that it in code, how I can goal it?. Is there some other way to make this in SQLExpress?
View 11 Replies
View Related
Apr 5, 2006
i saw some asp.net 2.0 start kit use this method to attach a database instance like this:
<add name="connectionstring" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=DataDirectory|JsskDb.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
but my develop enviroment is sql server 2000 and vs 2005,can i do it ?
View 2 Replies
View Related
Nov 11, 2001
In SQL when I right click on Databases the option to use Attach/Detach is greyed out. I don't understand why. I'm running SQL 7 on Win2000 server and I have Win2k at sp2 and SQL at sp2.
Help please!
Chris
View 1 Replies
View Related
Aug 4, 2004
Has anyone ever used the CREATE DATABASE statement with the FOR ATTACH clause?
I have a database with something like 128 physical data files which I have to move (detach, move the physical files and then re-attach). Since the limit for sp_attach_db is 16 files, I am forced to use the FOR ATTACH option. I was wondering if anyone had ever done this and if there were any hints and/or recommendations you might be willing to share...
Regards,
hmscott
View 6 Replies
View Related
Sep 20, 2004
Folks, i had a database with data and log file on seperate disks. After reboot, i've lost the log file; now i am trying to attache the data file using EM and QA, i get the following error; plz guide:
sp_attach_single_file_db 'production', 'd:production_data.mdf'
Server: Msg 1813, Level 16, State 2, Line 1
Could not open new database 'production'. CREATE DATABASE is aborted.
Device activation error. The physical file name 'D:production_log.LDF' may be incorrect.
Howdy!
View 2 Replies
View Related
Mar 30, 2006
I detached a db to copy it and to my surprise i cant reattach it the same way i detached ... How do i do this?
View 1 Replies
View Related
Jul 10, 2007
When I Attach Database it always rise up Error ( see image). how to do it ? anyone helps me thanks :o :o
View 3 Replies
View Related
May 13, 2012
i have a database wich is part of a vb.net project tha database worked fine..i wanted to change the location of the mdf file to the application folder so i copied it to that folder but then i tried to attach it to the server using the management studio right click database select attach that opened the add dialog box with the tree to locate the mdf file but the tree does not expand into the application folder and i can't get to the mdf file.so i tried to attach with attach command and i got the error message that access is denied error 5.i checked the security settings in all files and parent folders and everything seems ok
View 1 Replies
View Related
Jan 2, 2004
An original database (eg A.mdf) is imported/exported to a different server as named B.mdf. The detach of A.mdf was unitentionally not done. It seems that both the database were updated.
A.mdf - 123000KB 25/12/2003
A_log.ldf - 14000KB 25/12/2003
B.mdf - 67000KB 25/12/2003
B_log.ldf - 1024KB 25/12/2003
In this case, which mdf & ldf should be the correct database?
If I I remove A.mdf database by "detach", will B.mdf database work?
SQL server 2000 and SP3 installed.
Assistance is appreciated
View 9 Replies
View Related
May 11, 2004
A co-worker deleted the log file to a database that was running. At that point the database showed as suspect and stopped running. I was able to detach the database but I am unable to attach the database. I get a msg stating the logfile cannot be found would I like to create a new one. I select yes. I get the following error.
Error 1813: Could not open new database 'dbname'. CREATE DATABASE is aborted. Device activation error. The physical file name 'fullpath to the original log file' may be incorrect.
Any suggestions would be appreciated.
View 4 Replies
View Related
Jun 16, 2005
I am trying to attach a database to SQLEXPRESS. I get an error, [Directory Lookup for the file C: . . . DataORION.mdf" failed with the operating system error 5(Access is denied.)]
I tried to attach another database and got the same error. I have attached databases to SQLEXPRESS before successfully. I tried to attach using single file to no avail.
I am using the query, "sp_attach_db @dbname=N'ORION', @filename1=N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataORION.MDF'
go"
ORION.mdf is in the Data folder for SQLEXPRESS
What am I doing wrong or what did I change inadvertently to restrict my access to the file?
Randy Fair
View 6 Replies
View Related
May 4, 2007
Hi All.
I just start to use SQL2005 and don't know how attach .mdf file's database and change name of database at the same time?
Thanks.
View 5 Replies
View Related
