Attempted To Read Or Write Protected Memory Error In SSIS
Mar 17, 2006
I'm trying to import data from a Sybase ASE 12.0 database called "OurTestDatabase" into MS SQL Server 2005. I started SSIS Wizard and indicated "Sybase ASE OLEDB Provider" as a source and SQL Native Client as the target. I'm gettign the following error message:
The same data source worked with DTS when we thought we'd convert to MS SQL Server 2000. Is this a bug in SSIS? What can be done? Using ".Net Framework Provider for ODBC" is not a good option because this doesn't allow me to choose any tables from the Sybase source.
I have created few reports using SSRS 2005. I am using Oracle database in Data Source to fetch my data. It is working fine and showing me report correctly. But after running the report 8 to 10 times, it starts giving me Memory error. To get rid of that, I need to recycle (stop-start) ReportingService from IIS.
I am exactly getting following error...
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I am not getting the actual problem, why is it giving memory error only after running few times? Please let me know if anyone facing same problem or knowing the solution for the problem.
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------ Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets() at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font) at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate) at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate) at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate() at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
The shotshot agent is generating a snapshot, I got the error ' Attempted to read or write protected memory. This is often an indication that other memory is corrupt'. Then, the agent failed. I tried to restart the agent and generate a snapshot again. This time, it run normally. So far, I got this error twice since the replication launched. Kindly advise. Thanks a lot.
Hi, I am getting error while opening the Data Base Engine in Sql server Management Studio. We applied SP2. and restarted the server but no luck. Error Message:Attempted to read or protected memory. This is often an indication that other memory is corrupt(mscorlib).
I am trying to develop a SSIS package which will read the records from the flat file and insert them into a destination table. I have some validations written in script component. I have declared two Read Write variables with package level scope. when i try to assign a value to the variable in the script component and run the package, the package throws me an error "The collection of variables locked for read and write access is not available outside of PostExecute".
What should be done to over come the problem please help me on this regard
I'm contemplating a sql server archive strategy that rolls really old data off any sort of dbms and onto low cost media like dvds in a non relational archive format. I dont want to ever worry about these archives spanning different versions of sql when i go to retrieve a range of data that happens to span sql versions (eg one disc was sourced from 2005 another by 2008 but my report needs a union of both).
So I'm thinking about neutral/efficient formats for these archives and a live homegrown catalog that can determine exactly what disc(s) need to be mounted based on passed from and to date parameters...all so that the data that might span discs (and versions and maybe even schemas) can be merged and loaded into my sql version d'jour's "throw away" archive database for a one time report or other unplanned activity.
I remember raw data types being very convenient as an ETL format for our customers who have ssis, but wouldn't want our sqlexpress customers to be left without the archiving capability. Do the "things" that read and write raw data files really originate in some special T-SQL command that all sql editions can use, or is it strictly an ssis thing?
I am trying to execute a SSIS package from a client through BIDS, but when I start BIDS, I am getting the error -
SqlWb.exe : Application error - The instruction at "0X77D...." referenced memory at "0X00000002". The memory could bot be "read". Click on OK to terminate the program. Click on CANCEL to terminate the program.
Please help.
Other information:
I have tried running the package on the server and it executes properly. I really dont know why this is a problem with the SQL Server clients alone. I have also tried googling around and could not find any resolution. Can anyone point me to the right direction please!!!
Hi,I've got this dts package in sql server 2000 sp4 that has severaltransformation tasks with an oracle database (10g) as the destination.The package executes successfully when run through the dts designer butwhen run using dtsrun, I get the following error at the completion ofall tasks in the dts package. The data inserts into the oracle databasebut i always get this Application errorThe Instruction at "0x7c8327f9" referenced memory at "Oxffffffff". Thememory could not be "read"Does anyone know how I can fix this?ThanksLyn
I'm trying to do Sharepoint DR with Log Shipping and every thing configured except one thing which is switch the WSS_Content (Standby /Read-Only) DB to be ready and Write.Â
I tried from
GUI or ALTER DATABASEÂ [WSS_Content]Â SET READ_WRITEÂ WITHÂ NO_WAIT
I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:
Server: Msg 3415, Level 16, State 2, Line 1 Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.
What command(s) are needed to make these files read_write?
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
I am currently encountering an error of testing an SSIS package in the server.
The package runs fine on my laptop, but not in the server.
I appreciate it for any of your input, comments, and suggestions.
The package is to populate records (150k rows) from a DB2 table and insert them into
another DB2 table (12,754,715 rows).
The server,
Windows Server 2003 Enterprise
SQL server 2005 sp1
8 CPUs
6 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
My laptop,
Windows 2000 Professional
SQL server 2005 sp1
2 CPUs
2 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
It fails on the insertion part (see the error message at the bottom). I have been playing with "DefaultBufferMaxRows" and "DefaultBufferSize" properties, but still no luck so far.
For the testing purpose, I even only select 2 rows from the source table, but it still fails with the same error message. And strangely, it still takes a very long time to process (for just two rows). In my laptop, it only takes few second to finish.
I have been really pulling my head to try to figure it out. Any of your help/input is highly appreciated! Thanks!
======================
Error Message
[POLICY [1683]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E. An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
I am reading multiple XML file and i am using for each loop to get file name. these xml files are create by other process. If file is in use then i will get following error .
[Read XML file] Error: The component "Read XML file" was unable to process the XML data. There is an unclosed literal string. Line 1300, position 26.
i know that this error is coming because file is under process but i want to skip reading file which is reurning error. i don't want to read any data from this file.
In Data flow task i am using following steps 1. Reading file through XML Source 2. inserting data through script component task.
We have a large number of SSISDB packages running happily, connecting to our SQL Servers using ADO.Net or Sql Native Client, making their connection using NTLM. (We don't have our SQL Server SPNs correctly configured to support Kerberos).
The SSISDB packages are hosted on and run on a dedicated SQL server, different to the SQL Servers they are connecting to.
Very occasionally, the connection attempt is made using Kerberos instead of NTLM, and the connection attempt to sql server fails. (This is going by the Windows Security event log, which reveals a Kerberos login - a successful one at the Windows level - at the precise time that the calling agent job is informed of a connection timeout and fails, approx 23 seconds after the job starts).
The correct configuration of our SPNs is something we may wish to look into for security best practice, and would of course fix this. However, that may not be my decision to make.
I have been trying to load data from AS400 to DB2 (windows) using ADO.NET connection in Data reader source and OLEDB Destination (IBM Oledb provider )
The files, I€™m trying to load, have number of rows more then 15 million.
On execution of the package I get Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4 CPU Box.
There seems to be some Buffer and Swapping related issue which I€™m not able to figure out. It says that System is unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE 1.dtsx" starting.
Information: 0x4004300A at ABCDE 2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE 2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE 2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE 2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE 2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE 2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error code: 0x8007000E.
An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
Error: 0xC0047022 at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (12) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at ABCDE 2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Error: 0xC02090F5 at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE 2003 to 2004, DTS.Pipeline: The PrimeOutput method on component "DataReader Source" (61) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE 2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at ABCDE 2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE 2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE 2003 to 2004, DTS.Pipeline: "component "OLE DB Destination" (12)" wrote 289188 rows.
Task failed: ABCDE 2003 to 2004
Warning: 0x80019002 at ABCDE 1: The Execution method succeeded, but the number of errors raised (6) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Executing ExecutePackageTask: C:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005ProjectsIntegration Services Project1Integration Services Project1ABCDE 2.dtsx
Information: 0x4004300A at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed a memory allocation call for 10484320 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating 10484320 bytes.
Error: 0xC0047011 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory load. There are 4294660096 bytes of physical memory with 1548783616 bytes free. There are 2147352576 bytes of virtual memory with 227577856 bytes free. The paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE 2005_04 to 2005_11, DataReader Source [61]: The component "DataReader Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component "DataReader Source" (61) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE 2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE 2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to 2005_11
Warning: 0x80019002 at ABCDE: The Execution method succeeded, but the number of errors raised (7) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Executing ExecutePackageTask: C:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005ProjectsIntegration Services Project1Integration Services Project1ABCDE 3.dtsx
Information: 0x4004300A at ABCDE 2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE 2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE 2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE 2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE 2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked. Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes. Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free. Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition. Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E. Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Hi All, I have a web form that inserts information into two tables in sql 2005 database on a submit button click. I have a unique key on the tables preventing duplicate information which works fine. The problem I have is that at the minute if a users tries to insert a duplicate row they just get the built in sql error message. Is there a way I can validate the information before if goes into the database and display perhaps a label telling the user of their error or is there a way I can customize the build in sql error message? I've had a search on various forums and sites and can't find any info that would help me. Thanks in advance Dave
Hello, I need to run SSIS packages with the 32 bit dtexec version, and I am storing these files into the MSDB package store, in SQL Server 2005. I have chosen to encrypt sensitive data with password, and then to execute the packages with xp_cmdshell. The problem is that I receive the following message when I try to run it from management studio (when running this, I am logged in with the sa user): exec master..xp_cmdshell 'dtexec /Ser ServerName /SQL "TestFolderPackage" /De "testPass"' €œMicrosoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. NULL Started: 9:41:29 AM Error: 2008-05-22 09:41:29.70 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error€? If I run the same package with the same command specified above, but without sensitive data in it (a simpler version with no passwords and connection strings, it works fine) exec master..xp_cmdshell 'dtexec /Ser ServerName /SQL "TestFolderPackage"' If I run the firs package version (with sensitive data and password protected) from the command line, everything works well: DTExec.exe /ServerName OLAP /SQL "TestFolderPackage" /De "testPass" I know in ASP.NET when encrypting web.config section, the system stores the decryption keys in a app data folder, and in order to be able to read from the encrypted web.config, the user under which runs the ASP.NET must be granted access to that folder, by running asp_regiis.exe with some parameters. I believe here a have a similar problem, with users not being granted access to encryption keys. Thanks in advance
I have a query that runs for 10 sec on one database( A) and 5 min on another database(B) even though two database have identical scheam, tables, index and statistics..
I ran a profiler and got the below information CPU READ Write Database A: 92051 711956 8774 Database B: 91812 7621589 315822
A query runs on database has a significant larger read and write.. I don;t understand why this is happening? even though these two database have the same structure?? it has the same execution plan as well..
Hi, I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task-> dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
Hi, we're trying to read from a table and write back to the same table and are having a lot of trouble with blocking. What could we do to prevent our application from hanging due to blocking of this type?
Hi .. I want to Write in files or read from files for example i have My_File.txt . i need a syntax and i want to call this syntax in my Store procedure and this syntax write forexample " Hello Word " in My_File.txt . and i want another syntax that read from My_File.txt forexample "Word" from My_File.txt . what are those syntaxes do that ??
We currently run sql 2005 server and also sql express in our dev environments. We use sql express as an offline store (smart client). We have a similar/exact schema on the sql 2005 server and also the express.
We use the auto attach feature to connect to the express version of the database. Both the developer machines and the one that is running the sql 2005 server have exactly the same hardware configuration. The only difference may be that the server box is not running the VS.Net environment. The disk space etc is pretty much the same. Actually we run another database server(DB2) on the 2005 server machine.
We have observed that sql express is much slower and queries execute much slower aswell. For example, this may not be a totally scientific way of checking but a long running query on the server took only 2 minutes while on express it took longer than 9 minutes. The schema and data etc are the same.
Is there something we need to look into as far as read write speed/performance goes ?
I am using a Script Component and I have a Read/Write Variable varStatusCase (as assigned in the Custom Properties of my Script Component). I used this inside my script to get a specific value. However, when I ran it I get this error:
The collection of variables locked for read and write access is not available outside of PostExecute.
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio) ------------------------------ Program Location: at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter) at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream) at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value) at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize() at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful) at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush() at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie) =================================== Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS) ------------------------------ Program Location: at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events) at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
Okay, maybe I'm getting ahead of myself. Using SQL Server Express, VWD and .net 2.0 I've figured out how to drop a Table Column Constraint or Default Value/Binding and then Create it again using a stored procedure. What I can't figure out is how to retrieve that column's constraint value and write it to, say a label, in an aspx page, simply for reference. Is it possible? In this case the Data Type of the column is money. I'm using it to perform a calculation to a column with a value that the user inserts into another column. (Column1(user input) minus Column2(with Default Value) = Column3(Difference). I just want to read Column2's Default Value for reference so I know whether to change it or not.
