Attempting To Re-Cluster
Feb 15, 2000
In an attempt to 're-cluster' SQL Server 7.0 after re-installing SQL to change Sort Order, I am recieving the following error when I run the Failover Wizard.
"Could not update remote nodes in Cluster".
And here is the error from the sqlsp.log
13:50:05 Begin Setup
13:50:05 7.00.623
13:50:05 Mode=Silent
13:50:06 ModeType=SecNode
13:50:06 LoadLibrary failed on supporting DLL.
13:50:06 An internal error occurred during install (failed to load package id). Contact Microsoft Technical Support.
13:50:06 Action CleanUpInstall:
13:50:06 Installation Failed.
Has anyone else encountered this?
Thanks,
SR
View 1 Replies
ADVERTISEMENT
Aug 7, 2000
Hi,
I Everytimes I run a software I wrote on the server I get the following error:
Process ID %d attempting to unlock unowned resource %.*ls.
Does anybody experienced that type of problems before?
have a copy of the database and of the sfotwqre locally on my win 98 machine where it runs without problem. Once I try on the server it crashes miserably.
View 5 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Aug 9, 2004
This is the code I'm using on the web page located on the server:
Dim strConn as String
Dim conn as SQLConnection
strConn="server=localhost;Trusted_Connection=Yes;database=CIS"
conn=New SQLConnection(strConn)
conn.Open()
and the error messgae I receive is: Login failed for user 'MSP00427ASPNET'.
msp00427 is the name of the server
= = = = = = = = =
I have an MSAccess application that accesses the same database as follows with no trouble.
glblConnectString = "Driver=SQL Server;Server=msp00427;Database=CIS;Trusted_Connection=Yes"
Set cnn = New ADODB.Connection
cnn.Open glblConnectString
Set cmd = New ADODB.Command
cmd.ActiveConnection = cnn
cmd.CommandText = "Scorecard_Delete_ATLASDataDump"
cmd.CommandType = adCmdStoredProc
cmd.Execute
This is run on my PC and I have sa capabilities on the server.
The .NET framework is installed.
Any ideas why the data access on the web page fails?
View 3 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 28, 2014
I am getting the error 'Incorrect syntax near the keyword set' with the following code snippet -
declare @dteTo Date
set @dteTo = CONVERT(date, GETDATE())
My intention is to set the variable @dteTo to the current date (no time component). If I run a SELECT CONVERT(date, GETDATE()) command I do get what I want, it is just assigning the value to the variable that isn't working as intended.
View 8 Replies
View Related
Feb 17, 2007
I've just installed SQL Server Express and attempted to create my first database and received this error message :-(
Maybe this is a long shot, but can someone tell me what I've done wrong? Do I have a bad install or what?
Essentially I followed the steps below to create the database:
1. Started MS SQL Server Management studio Express
2. Right clicked on the Database folder
3. Selected "New Database..."
4. New Database panel displayed
5. Entered name of database - pip
6. Clicked "OK"
7. Receieved error dialog with followig message:
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Create failed for Database 'pip'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Could not obtain exclusive lock on database 'model'. Retry the operation later.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 1807)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=1807&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
May 3, 2006
Here is the error:
TITLE: SQL Server Import and Export Wizard
------------------------------
An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
------------------------------
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
------------------------------
The connection type "EXCEL" specified for connection manager "{55E5636D-F2A9-48D6-9723-867C9F241F5B}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
({F390DBA3-1B52-43F4-A624-9E71D273B4D7})
I really need to get this data into SQL server... why do I have to go through SQL 2000?
Regards,
View 7 Replies
View Related
Nov 29, 2007
I've inherited an application that has a query that typically bombs out due to a deadlock in SQL Server 2005. I know where the resource contention is, and why the deadlock happens, and why SQL picks this query to fail, so that's all cool with me. My problem is that I'm in the process of modifying this query to be a little less resource intensive, and I'm getting two different result sets.
The original query is returning 1234 rows, and my first replacement query attempt is returning 930. My replacement query attempt is using a derived table (subquery) rather than copying into a temp table (as the original query is doing). I understand what the missing rows are and why they are not in the result set, so my question is What is it about my replacement query attempt that is so different from the original query?
I appreciate any advice anyone might have to offer.
Best,
B.
/* original query */
Code Block
select * into #response
from response
where MidEndFlag = 'End'
SELECT COUNT(#response.ResponseID) AS TotalCount, CourseInfo.Subject, CourseInfo.Course, CourseInfo.Sect,
CourseInfo.Term, CourseInfo.Enrollment, (COUNT(#response.ResponseID) / (CourseInfo.Enrollment * 1.00))* 100 AS Percentage,
#response.MidEndFlag
FROM #response FULL OUTER JOIN CourseInfo ON #response.Term = CourseInfo.Term AND #response.Subject = CourseInfo.Subject AND
#response.Course = CourseInfo.Course AND #response.Sect = CourseInfo.Sect
WHERE (courseinfo.InstructorSelectionEndFlag = 'Y') and CourseInfo.Enrollment > 0 and courseinfo.term = @term
GROUP BY CourseInfo.Subject, CourseInfo.Course, CourseInfo.Sect, CourseInfo.Term, CourseInfo.Enrollment, #response.MidEndFlag;
/* end original query */
/* my first replacement query attempt */
Code Block
SELECT COUNT(r.ResponseID) AS TotalCount, c.Subject, c.Course, c.Sect, c.Term, c.Enrollment,
(COUNT(r.ResponseID) / (c.Enrollment * 1.00))* 100 AS Percentage, r.MidEndFlag
FROM (select * from dbo.Response where MidEndFlag = 'End') r full outer join CourseInfo as c ON
r.Term = c.Term and r.Subject = c.Subject and r.Course = c.Course and r.Sect = c.Sect
WHERE c.InstructorSelectionEndFlag = 'Y' and c.Enrollment > 0 and c.term = @term and r.MidEndFlag = 'End'
GROUP BY c.Subject, c.Course, c.Sect, c.Term, c.Enrollment, r.MidEndFlag;
/* end my first replacement query attempt */
View 6 Replies
View Related
Sep 19, 2005
I have a log table with no indexes, triggers, or keys. During the course of development, I will clean out the entries by selecting all the rows (in Database Explorer) and hitting the delete key.
View 6 Replies
View Related
Jun 21, 2007
I downloaded VisualBasic 2005 Express Edition recently, and the installation went flawlessly, but when I tried to download the optional component SQL server express, the installation failed. When two subsequent installations failed, I decided I'd get along without it, until such time as I discovered I *needed* it. Well, I'm here, and the installation is still failing. I've tried both installing it though the VBstudio setup, and downloading it separately, but both fail at roughly the same point. The error from the standalone installation is more descriptive:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup Failed to compile the Managed Object Format (MOF) file c:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29513&EvtType=sqlca%5csqlmofca.cpp%40Do_sqlMofcomp%40Do_sqlMofcomp%40x80041002
The link leads to an apology - they have no information on this subject. Of the help files, the troubleshooting page contains nothing (noticeably) relevant, and the log files have nothing obvious either, at least as far as I could tell... but then, I have no idea, which is why I'm here
View 1 Replies
View Related
Nov 5, 2007
Hi,
I get the following exception when attemption to create a connection from my i5 to our SQL Server:
Nov 5, 2007 10:09:33 AM com.microsoft.sqlserver.jdbc.TDSChannel enableSSL
WARNING: TDSChannel ( ConnectionID:1 TransactionID:0x0000000000000000) SSL handshake failed: null
com.microsoft.sqlserver.jdbc.SQLServerException: The driver could not establish a secure connection to SQL Server by using Secure Sockets Layer (SSL) encryption. Error: null.
at java.lang.Throwable.<init>(Throwable.java:195)
at java.lang.Exception.<init>(Exception.java:41)
at java.sql.SQLException.<init>(SQLException.java:40)
at com.microsoft.sqlserver.jdbc.SQLServerException.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(Unknown Source)
at com.microsoft.sqlserver.jdbc.TDSChannel.throwSSLConnectionFailed(Unknown Source)
at com.microsoft.sqlserver.jdbc.TDSChannel.enableSSL(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
I am using sqljdbc.jar version 1.2 and the classes load properly during the launch of the JVM.
I put 'encrypt=false' in the connection properties and everything I've looked at on the SQL Server side shows that SSL isn't being used on that end. Is there any diagnostic method I can use to determine why the driver is attempting to use SSL?
Thank you,
Chris
View 23 Replies
View Related
Sep 13, 2005
Hi all,
I have an application which works with SQL Server. When the application
attempts to load a page it needs to run certain queries. When it
attempts to run a particular query it fails but I catch the exception
and then log it. The following is logged:
System.Data.Ole.Db.OleDbException: Login failed for user 'CWAMB01DWH01ASPENT'.
Now what I don't understand is that this is the work group that ASPNET
is run under, and I am running other queries to the database via SQL
Server authentication. Why am I getting a failed login for this
workgroup? Do I need to create a new Login for the Server in SQL
Server, and then create a new user for the database with the same
username as the Workgroup name? If so, then how does the password work
for the SQL Server as the workgroup (CWAMB01DWH01ASPENT) obviously
doesn't have a password.
Thanks, and I hope I have explain my problem clear enough.
Tryst
View 1 Replies
View Related
Aug 7, 2015
I'm getting an operand type clash. Text is incompatible with int when attempting to archive table.
The table has several columns defined as Text.
[URL]
View 7 Replies
View Related
Sep 16, 2006
Hi,
We have a little problem for you:
We have 2 servers both running sqlexpress2005, both have service pack 1 installed, both have the same db (same tables etc.) both have the same users with the same passwords. Everything is identical.
What I want to do is move the db. I am attempting to do this by making a backup of the db and restoring it into the second machine. (I am not sure of a more practical way to do this without stopping the SQL server).
This is the problem, the backup process works fine, without error, but when restoring the copy to the other server ,it loses the dbowner property and all default users when attempting to connect recieve a 4064 error even though all the password for users are there. Very strange.
I tried to restore the copy to to the same server that I made the copy and everything works, this only happens when attempting to restore the copy on another machine.
Do you know if this is a possible bug? I have tried to do further test on 4 different machines now and the same happens.
The objective is to be able to send the data from sqlexpress server to another by making a backup and without the need t stop the sql server. Any suggestion would be appreciated.
Adam
View 5 Replies
View Related
May 26, 2007
i'm getting the following error message when i attempt to configure my server as a local distributor:
TITLE: Connect to Server
------------------------------
Cannot connect to 9A6375C3046246B.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server 9A6375C3046246B. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
this error is occuring despite the fact that i have the server configured to allow remote connections. can someone please help me troubleshoot this error? thanks.
View 11 Replies
View Related
Jun 26, 2006
I have something of a challenge for you folks (at least it's very challenging for me).
I have a table that has data that looks like this:
Date______OrderNum____WorkDay
2006-06-1__AA_________1
2006-06-1__AB_________1
2006-06-2__BA_________2
2006-06-2__BB_________2
2006-06-2__BC_________2
2006-06-5__CA_________3
2006-06-5__CB_________3
etc.
So, there are dates that orders happened and each date is marked as the 1, 2, 3, etc. business day of the month.
What I am trying to write is a SQL statement that will display results thus:
Day1______Day2______Day3_______etc.
AA________BA_______CA_________etc.
AB________BB_______CB_________etc.
Is this making any sense to anyone? Basically, I need to turn the WorkDay rows into columns and display all the info for each WorkDay under them.
I have a feeling this isn't hard, but I am fairly new to writing SQL so any advice would be pure gold to me. Thanks!
View 7 Replies
View Related
Feb 12, 2007
In SQL Server 2005, via the GUI, I wish to backup a database to an additional disk file (there is already an existing backup disk file for this database), so that I can have more than one backup. I've added the new disk file name, highlighted it, and clicked OK.
I get an immediate error (see below). Note, the 2nd error message is specifying the existing backup disk file, not the new one I'm attempting to create.
"Backup failed for Server 'WCS-DEV-TPA'. (Microsoft.SqlServer.Smo)"
"System.Data.SqlClient.SqlError: The volume on device 'D:Program FilesMicrosoft SQL ServerMSSQLBACKUPWCS_ADV_Longmont.bak' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set. (Microsoft.SqlServer.Smo)"
Does anyone know what causes this and how to correct it?
View 11 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Jun 21, 2006
I am trying to save user data to a sql table but keep getting the following error;
Unable to cast object of type 'System.Boolean' to type 'System.Data.SqlClient.SqlParameter'.
I am using VWD Express Edition with .NET 2.0 and a SQL 2000 database. The code that generates the error is as follows;
Public Function chkUser(ByVal strUser As String) As Stringdim MyConnection As SqlConnectionDim MyCommand As SqlCommandDim ReturnString As StringDim params As SqlParameterDim SelectCmd As String = "wm_CheckUser"MyConnection = New SqlConnection(myConnectionString)MyCommand = New SqlCommand(SelectCmd, MyConnection)MyCommand.CommandType = CommandType.StoredProcedure
Tryparams = MyCommand.Parameters.Add("@parUser", SqlDbType.VarChar, 100).Value = strUserMyCommand.Connection.Open()MyCommand.ExecuteNonQuery()ReturnString = "Record Exists!"Catch Exp As SqlExceptionReturnString = ReturnError(Exp.Number, "Users", Exp.Message)End TryMyCommand.Connection.Close()Return ReturnString
End Function
Basically, I'm traying to check to see if a user id already exists in the database before saving the data the user entered. If the email address entered by the user is already in the database I want a message to be shown to the user. If the email address does not exist then the data entered by the user is saved and the form goes to step two (2) of the user registration process.
Any help with this would be greately appreciated. I can't seem to see what is wrong here. Please someone help.
Thanks,
Jaime
View 7 Replies
View Related
Jul 14, 2003
Over the weekend, one of our out-of-house programmers ran an update to our three main tables. I know these are kind of broadstrokes, but basically he compared the data and updated certain fields when it met certain conditions (lots of rules basically). The three tables are one-to-one and contain a little over a million records. The comparison file contained around 400k records.
The scripts made it through 250k records from the comparison file before he had to stop it for the weekend.
When I came in to test the data yesterday - I was met with problems on my front end application - it would lock up on the write back to the database. I went into EP and experienced the same thing after making any changes to a record, it would just lock up. This only appears to be a problem on the 2 bigger tables of the 3. I currently have 12 gigs or so free on that box and I have already shrunk the log and data files.
I tried removing and re-adding the indexes, but I am freezing up everytime I try to either change or delete the Clustered Index on the Primary Key. I don't know why, but I thought maybe that was my issue.
I know this is pretty broad, but even if someone could give me ideas as to why SQL would lock up like that when trying to just save the data, it would be most helpful.
NOTE: There were NO structure changes in the update process and my restored data from Friday works perfect.
If you need more info, just ask. Thanks in advance for the help.
Don
elitecobra2000@yahoo.com
View 14 Replies
View Related
Feb 16, 2014
I've opened port 1433 in the Config Manager (error: The request failed or the service did not respond in a timely fashion.)
My Shared Memory Protocol is enabled, I've confirmed that the Server is allowed in Windows Firewall, I've configured the SQL Server to allow remote connections, I've started the SQL Browser with success....
I also receive the error message that (The MSSQL$SQLEXPRESS service on .... started and then stopped (Object Explorer)).
I uninstalled and reinstalled SQL Server Express 2012 and get the following failures:
Database Engine Services
SQL Server Replication
I think this the the core of my issue. how to remedy this?
View 1 Replies
View Related
Mar 22, 2007
Hello,
I would like a way to check a file before attempting to restore it. I want to be able to tell that this is a valid SQL backup file and not just some random file before I attempt a restore.
Any help would be appreciated!
hassiah
View 5 Replies
View Related
Apr 22, 2008
Hi,
I'm trying to install Microsoft SQL Server 2005 Express Edition (x86) on my laptop when a setup failure message would show up at the end. When I clicked for more details it has the followings:
Product Version 9.00.3042.00
Message Source setup.rll
Message ID 50000
EvtType sharedsetupsharedsetupactions.cpp
And later when I tried to uninstall it from Add/Remove Program the screen would simply flash when I click but nothing happens.
Please let me know what do I need to install the piece correctly, thanks!
Andrew
View 5 Replies
View Related
May 15, 2006
I successfully installed SQL Server 2005 SP1 on one PC. When I attempt to install it on a second PC, however, I get the following obscure error:
Unexpected Error Occurred
The following unexpected error occurred:
That's right, there's nothing else listed, other an OK button. D'oh! When I press the OK button, the following error report dialog box appears:
Hotfix.exe
A recently applied update, NULL, failed to install.
There are no pending updates that I'm aware of, as I just booted the PC. I sent the error report.
I notice on this particular PC that the SP1 install EXE is expanding/writing to an external SCSI drive; would that make a difference? I don't see a way to specify a different (i.e., internal ATA drive).
Any other ideas?
View 18 Replies
View Related
