I want a table to have an int auto primary key, that will fill in deleted rows.
EG
1
2
4
5
8
The next primary key should be 3 (NOT 9)
This table changes often, so just adding 1 to the last number used, will fast run out of numbers.
The table is accessed by many users, so it can not be manually generated.
Hi,
I have a table users where there is a user_id and an department column.
Also i have a table called KRS where there are the same columns, when a userid is given i want to auto fill in the departmentid,
Can someone help me with this?
Cheers Wim
Hi,
I have recently been looking at a database and wondered if anyone can tell me what the advantages are supporting a unique collumn, which can essentially be seen as the primary key, with an identity seed integer primary key.
For example:
id [unique integer auto incremented primary key - not null],
ClientCode [unique index varchar - not null],
name [varchar null],
surname [varchar null]
isn't it just better to use ClientCode as the primary key straight of because when one references the above table, it can be done easier with the ClientCode since you dont have to do a lookup on the ClientCode everytime.
Regards
Mike
How do I make a Primary Key in a table automatically increment as a new row of data is entered? do i have to do it with a trigger?? if so what is the code behind it....what I have is a Applicant table, which holds the ApplicantID (<<<needs auto incremented), FirstName, LastName, Address, City, State, Zip, and PhoneNumber. I enter all the other information through visual web developer, and what I need to do when the hit submit on the form with the data i want to automatically set an id right there. any suggestions will help!
View 3 Replies View RelatedHi all,I have a table where I have my ProdPK set up as Primary key, turned on "Is Identity" and set the Identity increment to 1. But each time I add a new item, the number incremented by 2... I have couple of other tables and they are all fine, just this particular table increased twice as it should. I check the setting against other tables and everything seems to be the same. By the way, this is adding the data to the table inside MS SQL Server Management Studio manually. I haven't done anything in the ASP.NET page yet. Thank you very much,Kenny.
View 5 Replies View RelatedDear all,
I am using SQL express 2005 in visual studio 2008. I would like to use Form View to insert new record in the table. There is a column call "id". I think it is too stupid to let user enter a unique identifier instead of generating by the system.
I know how to generate a random integer number in a normal TextBox. However, when I edit the InsertItemTemplate, I cannot modified the value of that textbox. For example, i couldn't use "TextBox1.Text = temp;" here. How can I achieve to change this TextBox's value by the system that I would like to generate a random interger. Thanks a lot.
Regards,
Eric Chan
How do I make my Primary Key Auto Increment from Enterprise Manager?
Thanks
I discovered the cause:
in SQL Server Enterprise Manager, open up db tree, right click the table, go - 'design' and set 'Identity' to yes.
I can't for the life of me find out how to auto increment the primary key like you can in access. I want to use userIds that will auto increment as new users are added. Can you guys help me out at all?
As of now I used this code as an example. I'm using SQL server 2005
CREATE TABLE Customer
(SID integer PRIMARY KEY,
Last_Name varchar(30),
First_Name varchar(30));
I was just wondering on a very simple database table with lets say a primary key set to columb ID and another columb lets say products, can you make the primary key automaticly increment its self whenever a new entry has been put in?For instance say I have this table set up with ID Being the primary KEY, Columb 1 = ID( INT ), Columb 2 = Products ( VarChar(50) ), and have the fields ID = 1, and products = my product.....and if a user inserts a new record say from a gridview or some sort of data entry the second ID Feild will automaticly be 2 and the products gets updated per user input.......I'm very sorry but I'm having a hard time putting this into words for some reason..umm basicly user adds something into the products feild and the ID field automaticly increments one number higher from the last one?ThanksAdam.
View 4 Replies View RelatedOk - I have two tables that are relational. I have been inserted data into the tables because of testing. I also have been deleting data. My question is how do I reset the auto-incremented Primary key values.
For example:
Primary key of table one is bizID. Well there are only 3 record currently in the table. The bizIDs are 1-3. If I insert another record the bizID will be 88 because that was the next auto-incremented number. I obviously deleted the other records. I want to start the primary key value over from zero. How do I accomplish this? thnks
How to auto increment an alphanumeric Primary Key in SQL? :( Because I want to add something like this in the Primary Key, for example i'll add a new data with an alphanumeric value of ABC-0001, then I'll add another 1, and it auto increments to ABC-0002 and so on.. How can I do it? And if I'll add a new alpha character in the Primary Key field, for example DEF-0001, then I'll add another and it auto increments to 002, and so on, and it will go back to 0001 if i'll use another combination of alpha characters. for example, i'll add a new alpha character AAA, will it go back to 0001 or it will continue? T___T I hope u get my point.. I want my table to look like this if i have added the dataABC-0001ABC-0002DEF-0001DEF-0002AAA-0001then if il add a new 1, for example ABCit will auto increment to 0003 in the same field, it will look like this after addingABC-0001ABC-0002ABC-0003DEF-0001DEF-0002AAA-0001Will it be possible? :(
View 4 Replies View RelatedHello vmrocha,
Our records indicate that you have never posted to our site before. We hope you find the help you need.
If you need to make a post, we're always happy to help.
I'm still looking for a solution on msdn, but i've decided also to post my question here.
How can i reset my primary key field auto-increment back to 0 in runtime (or in designtime)?
The table I am using have a column called Key which is the primary key of the table and a auto number. This primary key is not a foreign key in any other table.
I need to write SQL to drop the current primary key and add a new one Say "RecordId"
as the new primary key and which should be a autonumber too.
any idea.
thanks in advance
Hey there :)I'm using Ruby on Rails to create a migration of a legacy database onan MS SQL Server. I'd like to name my constraints myself, such as'pk_authors', but in the cases where a table has an auto incrementedIDENTITY(1,1) id field, Rails takes over and adds the primary keyitself when creating the table.This is fine, except then the constraint gets a name like'PK__authors_384934' which is not very intuitive or easily remembered;)I'd like to just throw in an 'ALTER TABLE authors...' statement justafter that table has been created, but I'm not sure how to go aboutrenaming the auto generated constraint since the name it gets ispartially random. Is there any way to indirectly refer to theconstraint like 'RENAME PRIMARY KEY CONSTRAINT ON authors TOpk_authors' or something like that, so that I can rename theconstraint?Thanks in advance,Daniel Buus :)
View 9 Replies View RelatedWe have upgraded our SQL 2008 server to 2012 last month. i've noted since then that many tables that have auto increment primary key bigint field increases by 1 like it should, then for some reason it jumps up by 1000 or even 10000? i have seed adn auto increment set to 1 but doesnt effect it. Is there anything that could be causing the next value to jump that much?
View 18 Replies View Relatedhi guys,
just a question regarding database design
i have a table with an auto-generated primary key but the problem is this:
say i have 4 records,so logically they'll be numbered 1 to 4.so the problem is whenever i delete all records and add new ones,the numbering will start from 5 and not 1 again.
how do i remedy this?
thanx
Hi. After inserting data (new row) by using DetailsView control, how to read auto incremented primary key (identity) of this new row from sql database to use it as parameter passed to stored procedure?
View 4 Replies View RelatedHi guys,I followed the ASP.net official tutorial to create a DAL & Business Logic Layer (http://www.asp.net/learn/dataaccess/tutorial02cs.aspx). I have a table with a int ID field. I wish to write a function to add a new entry into this table but have the ID field auto-increment.The ID field is set as the Identity Column and has a Identity Increment & Seed of "1". If I manually go to the table and insert a new record leaving the ID value null it automatically increments. But if I create a C# function to add a new entry I get an error saying that the ID field can't be Null. Is there any way to use the Update method as shown on line 14 below to add a new entry but with it automatically incrementing? I did create a function called InsertDevice that simply inserts the other fields using a SQL INSERT and it auto-increments fine, just wondering if there is a way to do it using the DataTable and the Update method? Thanks for any help!!! 1 public bool AddDevice(string make, string model)
2 {
3 //cannot have the same device entered twice!
4 if (Adapter.FillDeviceCountByMakeModel(make, model) == 1)
5 return false;
6
7 RepositoryDataSet.DevicesDataTable devices = new RepositoryDataSet.DevicesDataTable();
8 RepositoryDataSet.DevicesRow device = devices.NewDevicesRow();
9
10 device.make = make;
11 device.model = model;
12
13 devices.AddDevicesRow(device); << Error thrown Here!
14 int rows_affected = Adapter.Update(devices);
15
16 return rows_affected == 1;
17 }
I have a table that has a primary key that is auto incremented by 1. This table's data is cleared out periodically and as data gets added the auto id primary key continues to increase in numeric value. Once the data is cleared from the table the auto id names could be used again(the eventId is not stored) Currently the eventID is at 26,581,399. I know the maximum int value is 2,147,483,647.
How should I handle this? or rebuild the table every time the data is cleared(problematically)?
I have imported a whole bunch of tables. Most of them have an ID (int) column. Is there a way to set the ID columns across all tables to auto increment Primary Keys in bulk?
View 11 Replies View Relatedi would to make a column contains of 3 characters and 6 auto increment numbers (example: "DLL - 123456")
and made it primary key and which data type i should use. i do not know whether i use after insert trigger in two columns one for three characters and another for code which has identity property >>>so please help me
Since upgrading from SQL Server Management Studio 2008 R2, I've noticed that it no longer autosaves queries that have not been manually saved first. If a file has been manually saved the autorecover files end up in the following directory:
%appdata%MicrosoftSQL Server Management Studio11.0AutoRecoverDatSolution1
However, I have ended up in the situation where I have unsaved queries when my computer has crashed and have not been able to recover them.
I have also found references to .sql files stored in temp files in the following directory, but the files here seem to be very haphazardly caught:
%userprofile%AppDataLocalTemp
I have an MS SQL Server table with a Job Number field I need this field to start at a certain number then auto increment from there. Is there a way to do this programatically or within MSDE?
Thanks, Justin.
Uma writes "Hi Dear,
I have A Table , Which Primary key consists of 6 columns.
total Number of Columns in the table are 16. Now i Want to Convert my Composite Primary key into simple primary key.there are already 2200 records in the table and no referential integrity (foriegn key ) exist.
may i convert Composite Primary key into simple primary key in thr table like this.
Thanks,
Uma"
hi,
how can i fill dropdownlist through code not through visit.and i need to know which is fastest and easy way for web application throught this below query.
cmd.Connection = conn
conn.Open()Dim ds As New DataSet
cmd.CommandText = "SELECT Emp_Name,Emp_ID FROM Employee "
da.Fill(ds, "data")
cmd.ExecuteNonQuery()
conn.Close()
Can a SqlDataSource be used to fill a DataSet? If so, will you show me how it's done?
View 2 Replies View RelatedCurrently we have tables (in sql 6,5), many of them do not have primary keys.
While I was trying to re-index (re-org), many of them got an error:
"fillfactor 204 is not a valid percentage; fillfactor must be between 1 and 100."
(many tables' fillfactor exceed 100 or more...)
How can I fix them so I can upgrade to sql 7 ?
Thank you for your help.
I am really confused about this whole fill factor thing. The way I understand it, is if you have a table whose data remains pretty much static, you should use a higher fill factor. Suppose you had a database where you had at most 150 transactions a day that changed the data, should the fill factor be left at the default(0) or increased? How do you determine how much to increase it? Is there a rule of thumb that suggests if you have x number of changes against a table, you should have a fill factor between y and z percent?
Please Help
Chris
Hi all,
While creating indexes for a table, I specified a fill factor of 70%. I then inserted a few hundred rows into the table. Is it possible to check to what percent the pages are full after the rows have been inserted?
Thanks in advance,
Praveena
You have a db with 50,000 records and you want to add 100,000 more. What should the right fill factor be? Is there a way to "calculate" a fill factor if you don't want to use default? Any help is appreciated. Thank you.
View 3 Replies View RelatedIf fill factor is specified as 100 for a table what will be the impact of this?I want to know any updation or insertion will be possible or not?
View 3 Replies View Related