Auto Database Connetion When SQL Server Restarted In VC++

Mar 7, 2007

How can I connect database automatically when SQL server gets restarted while VC application execution. Any suggestions....

Regards
Sabitha

View 2 Replies

Does Offline Database Come Back Online When Server Is Restarted?

Jun 9, 2006

If you take a database offline to prevent users from accessing it, and then restart the server, will the database be back online when the server starts up?

If so, is there an option to prevent this from happening so that a database taken offline will remain offline until it is manually put online again by an administrator?

View 1 Replies View Related

JDBC SQL Call Failure After Database Service Is Restarted

Nov 28, 2007

Hello ,

I get this error (connection closed) in web applications, whenever SQL Server database Service is restarted. When I run the application again, the error disappears. Granted that there are lots of users and Database gets restarted every night is not helping.

Is there any setting in the JDBC driver properties, where I can tell it to open a closed connection (like a retry count), rather than fail the first time and work the second time.

We use
1. SQL SERVER 2005 SP2,
2. Websphere Protal Server 5.1
3. SQL SERVER 2005 JDBC driver 1.1(com.microsoft.sqlserver.jdbc.SQLServerConnectionPoolDataSource.)

I am wondering if connection pool driver is causing this problem. I do not care about connection pooling, but Websphere doen not seem to like any other JDBC Driver. I don't mind switching to another driver as the last option.

Error is :
[11/27/07 17:01:59:331 MST] 7202440d WSRdbManagedC W DSRA0080E: An exception was received by the Data Store Adapter. See original exception message: com.microsoft.sqlserver.jdbc.SQLServerException: The connection is closed.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.checkClosed(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.getCatalog(Unknown Source)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.getCatalog(WSRdbManagedConnectionImpl.java:676)
at com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.introspectSelf(WSRdbManagedConnectionImpl.java:808)
at com.ibm.ws.rsadapter.FFDCLogger.introspect(FFDCLogger.java:169)
at com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.introspectSelf(WSJdbcConnection.java:1253)
at com.ibm.ws.ffdc.IntrospectionLevelMember.getNextMembers(IntrospectionLevelMember.java(Compiled Code))
at com.ibm.ws.ffdc.IntrospectionLevel.getNextLevel(IntrospectionLevel.java:181)
at com.ibm.ws.ffdc.ObjectIntrospectorImpl.dumpContents(ObjectIntrospectorImpl.java:67)
at com.ibm.ws.ffdc.ObjectIntrospectorImpl.dumpContents(ObjectIntrospectorImpl.java:51)
at com.ibm.ws.ffdc.IncidentStreamImpl.introspectAndWrite(IncidentStreamImpl.java:396)
at com.ibm.ws.ffdc.IncidentStreamImpl.introspectAndWriteLine(IncidentStreamImpl.java:632)
at com.ibm.ws.ffdc.DiagnosticEngine.dumpObjectAndStack(DiagnosticEngine.java:301)
at com.ibm.ws.ffdc.DiagnosticEngine.processIncident(DiagnosticEngine.java:147)
at com.ibm.ws.ffdc.FFDCFilter.filterEngine(FFDCFilter.java:428)
.......lots of lines

Regards
Bobba

View 3 Replies View Related

Clustered Sql Server 2005 Restarted Suddenly

Nov 4, 2007

Hi EveryOne,

WIndows 2003 sp2 and sqlserver 2005 standard edition -sp2.

Found following erors in The cluster and event logs.

error: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect
failed

error: [sqsrvres] OnlineThread: QP is not online.

error: [sqsrvres] printODBCError: sqlstate = HYT00;
native error = 0; message = [Microsoft][ODBC SQL Server
Driver]Timeout expired

[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure

[sqagtres] SvcStop: service did not stop; giving up.
[sqsrvres] OnlineThread: asked to terminate while waiting for QP.

SQL Server is terminating in response to a 'stop' request from Service Control Manager

Earlier we had sudden Sql agent restart but this time sql server services were restarted .

What could be he reasons for this.

This machine has 64 GB ram and sql server has been alloted 30 Gb.
I found 30 Gb Usage in the dump file of Sqlserver

Can a memory Starved sql server could be a rason why sql server would have restarted

Thanks,
Gautham.R

View 1 Replies View Related

Restarted SQL Server 2005, And It's Working Great Now, But WHY??

Aug 3, 2007

My small business has about 21GIGs of data in our database. This entire week we've been running absolutely slow. Posting transactions have been taking up to 30+ seconds when they're normally instant.

We ran the profiler and found that certain stored procedures were taking an absolutely long time to run. We checked for fragmentation, indexing, etc. Keep in mind our hardware was constantly pegged at 80%+ all the time. We have about 60 users connected to our server at any given time.

After much effort to no avail, we finally resorted to just restarting the software. Some have even suggested powering down and rebooting our hardware, but I halted that. We stopped and restarted the server via the management studio and now everything is just peachy. We're funning super fast and smooth.

My concern is that we're just bandaid-ing the problem and not resolving it; so eventually we're going to be faced with this problem again. Even though restarting the server is quite easy and not too effective on our downtime, personally, I'd like to know what the real issue is. Isn't sql server 2005 a self-tuning software to begin with?

Has anyone experienced this and share some insights on what they did and didn't do to resolve this quirk?

View 3 Replies View Related

Sql Connetion

Nov 29, 2007

Hello
i am portuguese and my english is not good...sorry
1 - The connection to the northwinds database on my computer(visual 2005) is good and i use this code:<add name="northwindsConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|orthwinds.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>2 - i have attached that northwinds database to my remot server and i can acess it from control panel...at the control panel, they say The code for the connetion is: Provider=sqloledb;Data Source=sql349.mysite4now.com,1433;Initial Catalog=northwinds;User Id=id?????;Password=pass????????; the path at the remote server is -----------Northwind ------- Filename : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataorthwinds.mdf 3 - After attached the db, i want to run my local application on the remote server and access to teh mdf.Is this code good for connection to webaplication northwinds in your server?<connectionStrings> <add name="ConnectionString" connectionString="Provider=SQLOLEDB;Data Source=sql349.mysite4now.com,1433;Initial Catalog=northwinds;User Id=id?????;Password=pass?????;" providerName="System.Data.OleDb" /></connectionStrings>
Cumprimentos aquiles boiça

View 1 Replies View Related

Remote Connetion Problem

Oct 2, 2006

I developed a VB 2005 application that uses sql express for data.

I have a win xp pro box set up as a server with sql express installed. I enabled remote connections etc....

My laptop has the application (but not sql express) and the laptop is using a cat 5 cable connecto to the router of the server box.

When I run my application and log in from the laptop, the connection string works fine ..

con.ConnectionString = "Data Source=" & logServer.Text & ";Initial Catalog=" & logDatabase.Text & ";User ID=" & logUsername.Text & ";Password=" & logPassword.Text

and I connect to the server box sql express and all the funtions work on my aplication. I see all the data.

Also when I use the wireless connection all is ok.

I brought my laptop to a friend and connected it via cat 5 to his router. The connection was good because I was able to get on the web. Then I tried logging in as usual with my application into the server, but I got an error:
Sqlcmd: Error: Microsoft SQL Native Client: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.

Let me just add that I do have McAfee firewall set up on the server box and I have it set to allow sqlexpress. It's set up as a Home Network. I'm not sure if this can be the problem.

I'm not sure what the problem can be. Can anyone help me out?

Thanks

View 3 Replies View Related

Connetion Fails Suddenly

Apr 9, 2008

I've had this connection used for months and months. The setupQL Express + VS2008. In that particular app I use only one DB Connection but there are about 10 other Sql Server Dbs that I connect to in other apps.

I am still in a development stage.

Today I've decided to connect also via the Server Explorer in VS2008. All connections were established easy. Immediately after that a connection.Open ( ) statement failed with the error message

System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.

At the Open statement I did a break and with Ctrl + Alt + E got all exceptions. They are too numerous to show in here. One of the messages I found was that the failure occured in System.dll.

Any ideas as to why it happened?

I disconnected (deleted) the DB in question--no change. I deleted ALL DB connections from the server explorer in VS2008 - no change. I see the only option now and that is to reinstall the VS2008. I am kind of sick and tired of doing it.

Also I've been trying to move on to Linq and it is my understanding that in order to do Linq I have to establish connections via VS2008 not just connection strings. Is it right? Perhaps I am mistaken?

This particular connection is not that crutial. I can survice without it with this app but for others it would be impossible to continue development.

Any help will be appreciated.

Thanks.

P.S.

Some additional information has transpired. I checked Sql Server Object Explorer and immediately determined that the DB in question lost ALL its tables. There was just an empty shell: the name, no tables, no system tables, no Programmability, nothing.

I "deleted" this DB and reconnected it. The connection with my app miraculously restored itself. Now I could run the app with no problem and the connection to this DB could be Opened in the app. However, when I tried to set up the connection again in the Server Explorer of VS2008 the same thing promptly happened. Now I got this exception back.

It is not the way VS2005 behaved. Is it normal?

Thanks.

View 39 Replies View Related

Hardware Requairment For 1200 Concurrent Connetion

May 14, 2008

Hi,

Is any knows what will be the possible hardware requaired for the sql2005server which support 1200 concurrent connection

--Santhosh

View 7 Replies View Related

SQL 2012 :: Determine When SSAS Service Last Restarted?

Oct 20, 2014

Is there a way to determine when the SSAS Service last restarted? preferably a [mdx] query like you can do with the DB engine using a T-SQL query but any method that does not going to the servers OS and checking would be fine.

View 1 Replies View Related

Login Failed For User (I Restarted But Still No Luck)

Feb 25, 2008

Hi all just as the subject suggests I am getting the follwing problem not sure why as I have used the same method on a bunch of other servers but they were all on the same DOMAIN whereas this one isn't.

"Login failed for user ''. The user is not associated with a trusted SQL Server connection."

Using the following code:

Code Snippet

Str_connectionString = "server=OB-DEV6; database=WEBSERVER; Trusted_Connection=True"
sqlCon = New SqlConnection(Str_connectionString)

But it doesn'y seem to like that at all. I have gone into:

SQL Management Studio > Properties > Security > SQL Server and Windows Authentication

Restarted the SQLServerAgent (MSSQLServer)Restarted the SQL Server (MSSQLServer)

But still I get the same security error.

Cheers for the responses, Onam

View 1 Replies View Related

An Attempt To Attach An Auto-named Database For File (file Location).../Database.mdf Failed. A Database With The Same Name Exists, Or Specified File Cannot Be Opened, Or It Is Located On UNC Share.

Sep 2, 2007

Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J

View 3 Replies View Related

SQL 2012 :: SSMS Auto-recovery / Auto-save New (unsaved) Queries

Feb 16, 2014

Since upgrading from SQL Server Management Studio 2008 R2, I've noticed that it no longer autosaves queries that have not been manually saved first. If a file has been manually saved the autorecover files end up in the following directory:

%appdata%MicrosoftSQL Server Management Studio11.0AutoRecoverDatSolution1

However, I have ended up in the situation where I have unsaved queries when my computer has crashed and have not been able to recover them.

I have also found references to .sql files stored in temp files in the following directory, but the files here seem to be very haphazardly caught:

%userprofile%AppDataLocalTemp

View 2 Replies View Related

Auto Insert Fro Date In Database ..how?

May 1, 2007

how i make date field in database auto updated,some one told me to use '" Now "' in insert command, but it dos't work, i think it's for asp. regards

View 4 Replies View Related

Auto-restore Of Database Backups

Feb 26, 2004

Our DBs are set up to do a full backup once a day (late at night) and then transaction log backups during the day at shorter intervals.

I want to setup a dev database on the same server. I want this database to be an automatically restored copy of the live database. So every night, after the full backup of the live DB, I want to restore the live DB to this dev DB.

Can this be automated? Can the restore automatically stop the dev database in case some open connections exist?

Is there a better way to do this?

View 5 Replies View Related

How To Use Both Auto Generated Id And A Guid In Database

Oct 22, 2006

I downloaded the AdventureWorks OLTP Schema and am trying to use some of the design concepts that are used in this example but I don��t quite understand some things.

First there is a column named rowguid, at the moment I assume that this is a GUID. If this is wrong most likely my next question will make no sense.

Second if that is indeed a guid all the tables have another id; example would be Employee table would have employeeid and rowguid, why do this? My best guess is that you would use the guid to easily insert (linked/sync) data into multiple tables without needing to retrieve the id from the table that was first input into. My scenario would be inserting an employee; to insert an employee you need to create a row in the employee, contact and address tables and for ease you would use the guid to link these rows. But if this is the case wouldn��t there be sync issues that would arise?

If my guess is totally off please correct me also if anyone can direct me to some good resources that cover database design.

The schema can be downloaded at http://www.microsoft.com/downloads/details.aspx?familyid=0F6E0BCF-A1B5-4760-8D79-67970F93D5FF&displaylang=en#filelist

Thanks for any help.

View 1 Replies View Related

An Attempt To Attach An Auto-named Database For File...failed. A Database With The Same Name Exists, Or Specified File Cannot Be

Mar 24, 2006

I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42

This is the last statement on the Stack Trace:

SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091

I checked my server forum and they said I had to name a database:
Example: Database=(unique name);

But this didn't work either.

I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com

I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:

<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>

With all the comments in these forums - this must be a bug.

I have been working on this problem for over 2 weeks - HELP!

View 1 Replies View Related

An Attempt To Attach An Auto-named Database

Apr 6, 2008

I try to run a webform with gridview which is using the sqldatasource to get the customer table from local database, AdventureWorks_Data.mdf, it throws the following error:
Error:
An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.

View 3 Replies View Related

An Attempt To Attach An Auto-named Database

Apr 27, 2008

I try to display normal gridview in a webform but it throws this error:

An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataCommerce.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Line 45: Dim myAdapter As New SqlDataAdapter(myCommand)Line 46: myAdapter.Fill(myDataSet)Line 47: Line 48: gv_CashStatementList.DataSource = myDataSet
Web.Config
<add name="CommerceConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename="C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataCommerce.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True"
providerName="System.Data.SqlClient" />

View 2 Replies View Related

How To Code On Database To Send Auto Mail?

Sep 2, 2007

I want the server to send some auto email according to a column "expiry_date" in some table. How shall I do that? Use trigger?
Is it possible?

View 1 Replies View Related

Replication In Database Having Auto Incrementing Field

Aug 31, 2007

Hi,

If i were to replicate a database with another where in both the databases have an auto incrementing field. What could be the problems that's goin to arise out of it. How to deal with such a scenario...?????

View 6 Replies View Related

Can't Change The Auto Growth Option On My Database

Aug 3, 2007

I'm currently using SQL Server 2005. Before I have set my database on unrestricted auto growth. But today, I have noticed that the Log file has been set to limit its growth to 2,097,152 MB. I have 160GB space for my log files, I just want to maximize the space for logs in my hard drive.

When I try to change the settings back to auto growth it still keeps on returning to its previous setting it is still set on 2,097,152 MB. What I did was :
Right Click on the Database - Properties - Files - Click the (...) - set the auto growth option to unrestricted - Click Ok
But when I checked log file, it is still set on 2,097,152MB.

Can some one help me change the settings of my Database.

View 6 Replies View Related

Auto Increment Auto Non-identity Field

Jan 23, 2004

I have an MS SQL Server table with a Job Number field I need this field to start at a certain number then auto increment from there. Is there a way to do this programatically or within MSDE?

Thanks, Justin.

View 3 Replies View Related

An Attempt To Attach An Auto-named Database For File

Aug 17, 2006

I build a WebApp which i use the default DataBase that come with the App_Data folder.
I have Users and roles into that folder with all my tables regarding my new App.
Why i cant make it work under IIS on my webserver ? When i open it with Visual Studio everything works but outside of it nothing.
An attempt to attach an auto-named database for file c:inetpubwwwrootSurveyApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|aspnetdb.mdf;
I look arround and cant find a thing on how to fix my issue. I try deleting the Folder under my User Account for SQL Express and nothing happend.

View 4 Replies View Related

SQLExpress Database File Auto-creation Error:

Jun 12, 2006

i am using sql2005, the data inserted into the database by using createuserwizrd. after that anyone give me this error
anyone ? any thought? thanks please
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:

If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.

View 2 Replies View Related

Auto Number Or Identity Seed On Oracle Database

Jul 23, 2005

Need help on the Auto Number or Identity Seed on the Oracle DatabaseI got an Access database that need to be converted to Oracle 9i.Somehow the Trigger we created to simulate the "AUTO NUMBER" on Accesscould not create the sequence number as soon as the value has beeninserted. The sequence number can only be created after we go to thesecond line. Please see the trigger below.Is there anyway we could create a trigger that could create thesequence number as soon as we enter a value? It should be verysimilar to the "Auto Number" on Access, or "Identity Seed" on SQLServer.----------------------------------------------------------1. sequence SNP.SECTION_ID_SQ:CREATE SEQUENCE SNP.SECTION_ID_SQSTART WITH 1INCREMENT BY 1NOMINVALUENOMAXVALUENOCYCLECACHE 20NOORDER/GRANT SELECT ON SNP.SECTION_ID_SQ TO "PUBLIC"/2. Trigger SNP.SNP001_T_I_GET_NEXT_SECTION_ID:CREATE OR REPLACE TRIGGER SNP.SNP001_T_I_GET_NEXT_SECTION_IDBEFORE INSERTON SNP.SNP001_SECTIONREFERENCING OLD AS OLD NEW AS NEWFOR EACH ROW WHEN (new.section_id IS NULL)BEGINSELECT section_id_sq.nextvalINTO :new.section_idFROM dual;END;

View 1 Replies View Related

Transact SQL :: Tables And Database Not Detecting Auto While Coding

Aug 27, 2015

When I type Select statemet like below, Tables names are not populate auto. I need to type full lenght instead of selection in list.

Ex: I have few tables and database in my schema and need to select while coding.

select * from (Table Name) When i type first char in the table space it will not populate list of tables in my sql studio.

View 12 Replies View Related

Stuck With An Attempt To Attach An Auto-named Database...

Aug 13, 2007

View 1 Replies View Related

Stuck With An Attempt To Attach An Auto-named Database...

Aug 13, 2007

The last time I saved my Visual C# project, everything was functionning perfectly. Now, when I open my project, I have this warning on every one of my inherited forms. When I run the project, everything works fine. I've looked around for similar problems, but never found the solution that truly fits for me. Any suggestions?

An attempt to attach an auto-named database for file C:...DataBaseName.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.

at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at GestionnaireCadet.Données.dtsGlobalTableAdapters.TRACETableAdapter.Fill(TRACEDataTable dataTable) in C:Documents and SettingsIanMes documentsVisual Studio 2005ProjectsGestionnaireCadetGestionnaireCadetDonnéesdtsGlobal.Designer.cs:line 5927
at GestionnaireCadet.frmGestionnaire.Gestionnaire_Load(Object sender, EventArgs e) in C:Documents and SettingsIanMes documentsVisual Studio 2005ProjectsGestionnaireCadetGestionnaireCadetGestionnaire.cs:line 31
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Design.DesignerFrame.Initialize(Control view)
at System.Windows.Forms.Design.DocumentDesigner.Initialize(IComponent component)
at System.Windows.Forms.Design.FormDocumentDesigner.Initialize(IComponent component)
at System.ComponentModel.Design.DesignerHost.AddToContainerPostProcess(IComponent component, String name, IContainer containerToAddTo)
at System.ComponentModel.Design.DesignerHost.Add(IComponent component, String name)
at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.CreateComponent(Type componentType, String name)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.CreateInstance(Type type, ICollection arguments, String name, Boolean addToContainer)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.CreateInstance(Type type, ICollection arguments, String name, Boolean addToContainer)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)

View 6 Replies View Related

An Attempt To Attach An Auto-named Database For File......

Nov 14, 2006

I've read through all the posts in this fourm that are related to the problem I'm getting with this error message on my main form, but none of the fixes seen to solve the problem. So I hope someone can get me pointed in the right direction.

I'm running visual studio 2005 professional, and SQL Server 2005 Express Edition and this is a desktop application. I added the db file to the solution with the Add New Data Source wizard, I can create the datasets and preview the data correctly.

An attempt to attach an auto-named database for file C:Program FilesMicrosoft Visual Studio 8Common7IDEdbInventory.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.

When I run the program the exception is throw in the Settings.Designer.vb code, Public ReadOnly Property for the connection string. The InnerException is this...

{"An error occurred loading a configuration file: Could not find a part of the path 'C:Documents and Settings<UserName><ApplicationName>.vshos_StrongName_1sdf1e34hkn1hqmkn2bgjjwstusfj2sg1.0.0.0user.config'. (C:Documents and Settings<UserName>Application Data...<ApplicationName>.vshos_StrongName_1sdf1e34hkn1hqmkn2bgjjwstusfj2sg1.0.0.0user.config)"}

This folder doesn't exist anywhere on the system, any ideas....

TIA,

View 10 Replies View Related

An Attempt To Attach An Auto-named Database For File Failed.

Oct 8, 2006

Hi,I recently installed VS Web Developer Express Ediition and SQL Server Express and I'm doing the How To tutorials and I can't finish the basic data access walkthrough:http://msdn2.microsoft.com/en-US/library/tw738475.aspxBecause I get an error like this (link for complete error below): An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.http://pastecode.com/6196When I am setting up the data source for the gridview tool, everything works fine and the test query works fine, but then when I try to actually test the output in the browser with Cntrl+F5 I get this error. I have been trying for 48 hours to find a solution on my own. I have googled, I have searched everything and I just am at a point where I think I need to ask someone for help. Please help.

View 6 Replies View Related

An Attempt To Attach An Auto-named Database For File Aspnetdb.mdf

May 1, 2007

having exhaustively searched the forum and tried everything over the pas few days im still recieving :Error Caught in Application_Error eventError in: http://mysite.com/site1/index.aspxError Message: An attempt to attach an auto-named database for file E:Inetpubwwwrootmvate.comWapCmsApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Stack Trace: at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) at System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) at System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) at System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) at System.Configuration.SettingsBase.get_Item(String propertyName) at System.Web.Profile.ProfileBase.GetInternal(String propertyName) at System.Web.Profile.ProfileBase.get_Item(String propertyName) at System.Web.Profile.ProfileGroupBase.GetPropertyValue(String propertyName) at ProfileGroupUser.get_ClientID() at InfoPage.Page_PreInit(Object sender, EventArgs e) at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Page.OnPreInit(EventArgs e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)help and suggestions appreciated

View 1 Replies View Related

SQLExpress Database File Auto-creation Erro...........Im Lost!

Mar 28, 2008

here is my error message wich can also be seen live at www.aspdoug.com/menu log in with user: doug pass: macromedia!
--------------------------------------------------------------------------------------------------------------------------------
Server Error in '/menu' Application.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:

If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:

[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +68

[HttpException (0x80004005): Unable to connect to SQL Server database.]
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +124
System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) +86
System.Web.Management.SqlServices.Install(String database, String dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) +397

Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Below is my web.config file.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------<?xml version="1.0"?><configuration>

<appSettings/>
<connectionStrings>
<add name="aspdougcomConnectionString" connectionString="Data Source=65.36.214.248;Initial Catalog=aspdougcom;Persist Security Info=True;User ID=*&^%$#@;Password=*&^%$#@"providerName="System.Data.SqlClient" /></connectionStrings>

<system.web>
<compilation debug="false" strict="false" explicit="true"></compilation>
<pages><namespaces>
<clear /><add namespace="System" />
<add namespace="System.Collections" /><add namespace="System.Collections.Generic" />
<add namespace="System.Collections.Specialized" /><add namespace="System.Configuration" />
<add namespace="System.Text" /><add namespace="System.Text.RegularExpressions" />
<add namespace="System.Web" /><add namespace="System.Web.Caching" />
<add namespace="System.Web.SessionState" /><add namespace="System.Web.Security" />
<add namespace="System.Web.Profile" /><add namespace="System.Web.UI" />
<add namespace="System.Web.UI.WebControls" /><add namespace="System.Web.UI.WebControls.WebParts" />
<add namespace="System.Web.UI.HtmlControls" /></namespaces>
</pages>

<authentication mode="Forms" />

</system.web>
</configuration>

-------------------------------------------------------------------------------------------------------------------------
MY host told me that they do not support sqlexpress and to change it MySql 2005 or something. im using hostmysite.com builder plan.

View 1 Replies View Related