Hi,
I have a table users where there is a user_id and an department column.
Also i have a table called KRS where there are the same columns, when a userid is given i want to auto fill in the departmentid,
Can someone help me with this?
Cheers Wim
I want a table to have an int auto primary key, that will fill in deleted rows.
EG
1
2
4
5
8
The next primary key should be 3 (NOT 9)
This table changes often, so just adding 1 to the last number used, will fast run out of numbers.
The table is accessed by many users, so it can not be manually generated.
When I try to insert a record on my DB (SQL 2005 Express) I get a constraint error. This is my table setup which has been simplified to expose the problem I have:
Categories TABLEint CatId PKvarchar CatName :
Items TABLEint ItemId PKvarchar ItemName :
X_Items_Categoriesint CatIdint ItemId
So basically I have a one-to-many relationship between Items and Categories, in other words each item is associated to one or more categories and this association is done via the X_Items_Categories cross table. On this cross table I set two constraints:
The CatId of each entry in the cross table (X_Items_Categories) must exist in the Category table, and
Hi
I have a one to many relationship between two MS SQL tables.
When inserting a record in the master table (primary key is autoinc) how can I get this value for setting in the foreign key details table?
TIA
I have two tables and I'm trying to create a one to many relationship (master table can have many records in the details table)
I created a column in my details table with with ID of the primary key in the master table.
The primary key ID isn't inserted as a foreign key when I insert a record. I specifed the relationship in EM.
Not sure why the primary key ID isn't inserted as a foreign key into my details table?
Any help is greatly appreciated. Thanks.
-Dman100-
HiIm a sql newbie , and have created two tables with a foreign keyrelationship.How do i insert into these tables. If i insert into the primary tablewill the foreign key field in the second table be automaticly updatedby ms sql server ?
View 1 Replies View RelatedHey guys,
I would like to know what the following options means when we set a foreign key relationship between two tables and when to use them ( yes or no):
1- Check existing data on creation or Re-Enabling.
2- Enforce contraint for replication
3- Enforce foreing key contraint
Thx.
I'm using MS SQL Server Studio Express 9.0. When selecting SQL Server Compact Edition, I'm able to create tables and primary keys with no problem. But how do I create a relationship with another table (foreign key)?
Bob K.
Hi i have two tables
X and Y
X is the Parent table and Y is the child
X has gpikey char(14) and Record type char(1) as Primary key
y has Name as primary key and column xgpi char(14) which should be the foreignkey to table X
what approach should i take to establish relationship between these two tables.
gpikey of recordtype 5 is equal to value in xgpi in table y
ex: data
Table X
gpikey recordtype
123 1
2345 2
272626 5
Table Y
Name XGPI
dhdhd 272626
x and y are having one to many relationships
I'm having trouble defining a relationship in SQL Express with a concatenated foreign key.
I have 3 tables. Date, Company and Detail
Date has a PK1
Company has a PK2
Detail has a concatenated foreign Key of PK1, PK2
When I go to set the foreign key relationship in Management Studio 'Tables and Columns', it seems I can only select 1 primary key table on the left for my 2 foreign keys. How can I add 2 primary key tables to point to each FK in my detail table?
I would like to create a auto relationship between tables.
Currently I am using Northwind DB with tables (Orders, OrderDetails, Customers)
Orders ( OrderId, Customerid)
OrderDetails(OrderId)
Customers(CustomerID)
Now, if the user wants to generate a relationship automatically based on SAME FIELD Names.
What is the approach?
I want to create a table with primary key , and put relationship with second table.
View 5 Replies View RelatedI have to load data into destination table, it has foreign key relation to two different tables called person table and organization table . sample data to be loaded is like
person_id organization_id
1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Null
2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â NULL
Null               1
null              null
person table and organization table doesn't have null values in them, when I try to load this data none of them are laoded, I know either person_id or organization id having null value is failing foreign key constraint. But I want to transfer all the rows except the ones having both nulls. how this can be achieved ?
Should we have foreign key relationship between two slowly changing dimensions?
Most of the cases we talked about are about how to build an SLC, any example of trying to have two SLCs with FK relationship in a snow flake schema?
Hi all,
I use the following 3 sets of sql code in SQL Server Management Studio Express (SSMSE) to import the csv data/files to 3 dbo.Tables via CREATE TABLE & BUKL INSERT operations:
-- ImportCSVprojects.sql --
USE ChemDatabase
GO
CREATE TABLE Projects
(
ProjectID int,
ProjectName nvarchar(25),
LabName nvarchar(25)
);
BULK INSERT dbo.Projects
FROM 'c:myfileProjects.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
=======================================
-- ImportCSVsamples.sql --
USE ChemDatabase
GO
CREATE TABLE Samples
(
SampleID int,
SampleName nvarchar(25),
Matrix nvarchar(25),
SampleType nvarchar(25),
ChemGroup nvarchar(25),
ProjectID int
);
BULK INSERT dbo.Samples
FROM 'c:myfileSamples.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
=========================================
-- ImportCSVtestResult.sql --
USE ChemDatabase
GO
CREATE TABLE TestResults
(
AnalyteID int,
AnalyteName nvarchar(25),
Result decimal(9,3),
UnitForConc nvarchar(25),
SampleID int
);
BULK INSERT dbo.TestResults
FROM 'c:myfileLabTests.csv'
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
GO
========================================
The 3 csv files were successfully imported into the ChemDatabase of my SSMSE.
2 questions to ask:
(1) How can I designate the Primary and Foreign Keys to these 3 dbo Tables?
Should I do this "designate" thing after the 3 dbo Tables are done or during the "Importing" period?
(2) How can I set up the relationships among these 3 dbo Tables?
Please help and advise.
Thanks in advance,
Scott Chang
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
How can I create a one-to-one relationship in a SQL Server Management Studio Express Relationship diagram?
For example:
I have 2 tables, tbl1 and tbl2.
tbl1 has the following columns:
id {uniqueidentifier} as PK
name {nvarchar(50)}
tbl2 has the following columns:
id {uniqueidentifier} as PK
name {nvarchar(50)}
tbl1_id {uniqueidentifier} as FK linked to tbl1.id
If I drag and drop the tbl1.id column to tbl2 I end up with a one-to-many relationship. How do I create a one-to-one relationship instead?
mradlmaier
I have four tables with relationships as shown. They have a circular relationship and so one of the relationships is forced to be inactive.
  Operation (Commodity, OperationKey)  ==========>Â
Commodity (Commodity)
                     /                                                                       Â
/
                      |                                                                        Â
|
  Advice (OperationKey)      ====== (inactive)=======>
Operation Commmodity (Commodity, OperationKey)
I have the following measure:
Advice No. Commodity:=CALCULATE (
COUNTROWS ( 'Advice' ),
USERELATIONSHIP(Advice[OperationKey],'Operation Commodity'[OperationKey]),
operation
)
However, the userelationship function does not override the active relationship between Operation & Advice and so the measure is limited to Advices directly filtered by the Operation table.
If I delete the relationship between Operation and Advice, then the measure works as expected i.e. Operation indirectly filters Operation Commodity which filters Advice.
Hello ,please help me
Is it possible to pass a column name through a parameter
something like this
create procedure dbo.paramerers
@parameter varchar
as
select @parameter from table1 where....
because it doesn't give me an error but it also doesn't work
I'm trying to add a column trough command "ALTER" and I've tried in many different ways.
Here is the result of statement..
hi focks;
through the jobs is possible it s working fine but
is it possible to run the packages through the stired procedure 2005
ok if possible how please help me
regards
koti
I lost few days to solve a problem regarding the connection to an Oracle database server (10) with goal to execute a distributed transaction.
The environment was:
Windows Server 2003 Standard
MSSQL Server 2000 Standard
Oracle 10g Production Edition
The connection was quite easy to make with the Microsoft driver, but the error was:
Server: Msg 7391, Level 16, State 1, Line 3
The operation could not be performed because the OLE DB provider 'MSDAORA' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'MSDAORA' ITransactionJoin::JoinTransaction returned 0x8004d01b].
I tried to use the oracle odbc driver, but all kinds of errors were raised, regarding the TNS name and stuff like this. The real cause was that when you create the linked server you must to check the €œAllow inbound process€? in the provider options.
The Oracle ODBC driver allow distributed transactions.
I have got two user-defined functions: fn_Top and fn_Nested. The first one, fn_Top, is structured in this way:
CREATE FUNCTION [dbo].[fn_Top]
RETURNS @Results table (
MyField1 nvarchar(2000),
MyField2 nvarchar(2000)
[code]....
ENDI would like to perform a sort of dynamic parameter passing to the second function, fn_Nested, reading the values of the numeric field MyCounter in the table OtherTable.Fact is, x.MyCounter is not recognized as a valid value. Everything works fine, on the other hand, if I set in fn_Nested a static parameter, IE dbo.fn_Nested(17).
Hi guys,
Can somebody tell me where i can find ( or explain me ) the steps to
connect to sql server using the internet. I am using VB6 (SP6) and SQL SERVER 2000
I want to set up asql server on a central location ( PC ) so that 4 different sites can access the data stored
Thanks for all help
grtz Robert
Hi guys,
When I thought everything is okay with this script, I got a new problem...
I have a VBA's script from Excel 2003 that builds sql script and retrieves data from SQL SERVER 2000.
in order to make the sql running, I need to use a multi - batch processing, to pass and execute every command line once a time.
Up to here, I am using a test case with Account number = '123456' and getting the desire results.
The code below is running okay with the test case, but when changing the account number (mark as yellow in the code) to include all the accounts (or just one other account), I am getting the following ERROR:
run - time error '-2147217871 (80040e31)' - [Microsoft] [ODBC SQL Server Driver] time out expired.
Now, if I take the same code, with the condition that generates the ERROR, and try it into SQL Server, I get the results without errors.
Thanks in advance,
Aldo.
Below the code:
Code Snippet
Function QuerySalesAging()
'--------------------------------------------------------------
'MUST !!! References: Microsoft ActiveX Data Object 2.1 Library
'--------------------------------------------------------------
Dim ConnString As New ADODB.Connection
Dim RecordSet As New ADODB.RecordSet
'Setting Connection String
Driver = "{SQL Server}"
ServerName = "SERVER"
DB_Name = CompanyName
ConnString = "Driver=" & Driver & ";" & "Server=" & ServerName & ";" _
& "Database=" & DB_Name & ";" & "Uid=" & SQLLoginName & ";" & "Pwd=" & SQLPassword & ";"
'Report Criterias
Criteria05 = " AND " & "Accounts.ACCOUNTKEY Between " & AccountKeyAsRange
' -- ==> With AccountKeyAsRange = '123456' AND '123456' it works okay.
' -- ==> With any other value, in example AccountKeyAsRange = '123456' AND '9999999999' it get's ERROR.
CmdLine01 = " USE " & CompanyName
' Check and drop temporary table
TemporaryTableName = "CTE" ' The table is a regular one
CmdLine02 = " if object_id('" & TemporaryTableName & "') is not null exec('DROP TABLE " & TemporaryTableName & "') "
CmdLine03 = " SELECT ..."
CmdLine03 = CmdLine03 & " INTO " & TemporaryTableName
CmdLine03 = CmdLine03 & " FROM ..."
CmdLine03 = CmdLine03 & " WHERE " & "(" & Replace(Criteria05, "AND", "") & ")"
CmdLine03 = CmdLine03 & " ORDER BY ..."
CmdLine04 = CmdLine04 & " ALTER TABLE " & TemporaryTableName ...
CmdLine05 = CmdLine05 & " UPDATE " & TemporaryTableName ...
CmdLine06 = CmdLine06 & " SELECT ..."
CmdLine06 = CmdLine06 & " FROM ..."
ConnString.Open
ConnString.Execute CmdLine01
ConnString.Execute CmdLine02
RecordSet.Open CmdLine01, ConnString
RecordSet.Open CmdLine02, ConnString
RecordSet.Open CmdLine03, ConnString
RecordSet.Open CmdLine04, ConnString
RecordSet.Open CmdLine05, ConnString
RecordSet.Open CmdLine06, ConnString
ConnString.Execute CmdLine01
ConnString.Execute CmdLine02 ' The debbuger stops here:" if object_id('CTE') is not null exec('DROP TABLE CTE') "
ConnString.Execute CmdLine03
ConnString.Execute CmdLine04
ConnString.Execute CmdLine05
ConnString.Execute CmdLine06
ConnString.Execute CmdLine02
'Retrieve Field titles
For ColNr = 1 To RecordSet.Fields.Count
ActiveSheet.Cells(1, ColNr).Value = RecordSet.Fields(ColNr - 1).Name
Next
ActiveSheet.Cells(2, 1).CopyFromRecordset RecordSet
'Cleanup & Close ADO objects
ConnString.Execute "USE master"
ConnString.Close
Set RecordSet = Nothing
Set ConnString = Nothing
End Function
I know this is possible in DB2 and Oracle, but what about for SQL-server 2005
1) select X number of rows from table1
2) I need colums for each row of table1 in a new table
3) As such, Select (select * from X where x.id = @ID), a,b,c from table Y where y.Id = @ID
And I dont want to use IfExists.
Thanks
DK
Hi folks. This is my first post around here.
So I want to query a select on a table. Is there a simpler way to match the where clause with all columns than referencing every single column in the where clause?
Thanks
Shabassa
Hello all.
I have a column named 'RELATED' of type text in a table. I want to update the contents of this colums...........but still keep what is currently stored in it. Basically i want to add some text onto the end of the string it currently contains.
Any help would be much appreciated.
I’d like to get some data which includes month values bound to a data grid. The data is stored in a table like so:
Measure Month Value
A June 10.00
A July 9.00
A Aug 11.00
B Jun 100.00
B Jul 98.00
B Aug 99.00
C Jun 0.75
C Jul 0.8
C Aug 0.91
I need to report the data like this:
Measure Jun Jul August
A 10 9 11
B 100 98 99
C 75% 80% 91%
This was simple in classic ASP. Just use two recordsets, create a new table cell for each month using the first recordset then use the second recordset for each row.
But is there a way to “Pivot� or rotate the data so I can use the DataGrid? It only seems possible if each month has its own column field in table. Each month add a new column.
I can restructure the database, if needed.
I thought about creating a Cube, but that seems to have its own limitations. For example what if I want to add a Column for Quarter and year totals? I don’t think it’s possible to show multiple planes like that in an query of a cube.
It seems that this might be resolved in the presentation layer or the data layer. Any Suggestions?
I am getting this from my client
TableA
StorID LineNumber Text
30000 1 ClientName
30000 2 ClientSurname
30000 3 3333333
30000 4 20-05-2004
I actually want this to look like
TableB
StoryID Name Surname Policy Date
30000 Name Surname 3333333 20-05-2004
Can you help with the script to convert this to one record with many fields (as in TableB) if this is
Can someonte tell me that if i
bcp bda..mytable out c:discounts.xls -c -p , how can I put the first row as my column names since I get only data
Hello All, first time post here and really stuck on this issue.
I have 4 Tables that i am Joining Across. Each one of the tables has around 800,000 Rows in it. I am Joining them all on a field Called MDRReport Key.
my query looks like this
SELECT Mdrfoit.MDRReportKey, Mdrfoit.DtReport, Mdrfoit.DateReceived, Mdrfoit.EventType, Mdrfoit.AdverseEvent, Mdrfoit.ProductProb, Mdrfoit.ReportOccup,DevTable.BrandName, DevTable.ManName, DevTable.ModelNumber, DevTable.ProductCode, DevTable.DeviceFamily, TextTable.Text
FROM Mdrfoit
INNER JOIN DevTable ON Mdrfoit.MDRReportKey = DevTable.MDRReportKey
INNER JOIN TextTable ON Mdrfoit.MDRReportKey = TextTable.MDRReportKey LEFT OUTER JOIN probLink ON Mdrfoit.MDRReportKey probLink.MDRReportKey
WHERE Mdrfoit.DateReceived BETWEEN '1/1/1995' AND '1/1/2007') AND
AND (DevTable.BrandName LIKE '&PLV%')
My problom is that when i do this i get back 3 rows in my result set for every 1 result that i want So ill get like
2615681/24/200000:00.0MNY114PLV-100RESPIRONICS, INC.35001CBK
2615681/24/200000:00.0MNY114PLV-100RESPIRONICS, INC.35001CBK
2615681/24/200000:00.0MNY114PLV-100RESPIRONICS, INC.35001CBK
So my result set is on average 3 time larger then its suppose to be, This is also causing my query time to be very very slow.
There are no Duplicate entries in the database where all of the fields are the same. I am confused on if this is a problom in my query. Any advice would be great
"When you have everything to loose and nothing to gain, All-In is not an option"
Hi all,I am a newbie to sql and I need your help.I want to update column (email) from one table to another validating theCustomerid column in both table. Update the email address in productiontable with the email address in temp table if the customerid is same in bothtables.What would be the query?Thanks,
View 3 Replies View Related