I have a table that contains a field LastUpdated. This field should contains the date of the last update of the record.
Is there a way to auto-update this field value to the getdate() value each time the record is "touched" by an UPDATE sql command?
Thanks in advance,
Joannes
Im using a trigger to check updates on particular table and execute a email. it works but it doesnt show the right record
im looking into one table called SiteInfo.
here is my code
Im using sql 2005, can someone look at my code or the select statement.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE TRIGGER TTSUpdate
ON SiteInfo
FOR UPDATE
AS
declare @SiteID varchar(10)
declare @Body2 varchar(2000)
declare @Sitename varchar(50)
declare @TTSCreate varchar(30)
declare @TTSCreator varchar(50)
declare @Subject2 varchar (100)
SELECT @SiteID = SiteID,@Sitename = AccountName,@TTSCreator = TTSOwner,@TTSCreate = TTSCreatedDate
from SiteInfo
SET @Body2 = 'New TTS site created: ' + @Sitename + ' With TTS Site ID:' + @SiteID + ' TTS was created on: ' + @TTSCreate + ' By:' + @TTSCreator
SET @subject2 = 'New TTS site created: ' + @Sitename
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'TTSAdmin',
@recipients = 'email address here',
@subject = @subject2,
@body = @body2
GO
I've gotten conflicting info about this in the past so I thought I'd try to get clarification.
When a record is deleted, I'm sure it fires the delete trigger. Does it also fire the update trigger?
Thanks
Hi guys, may I know is it possible to create an update trigger like this ? Assuming there are two database, database A and database B and both are having same tables called 'Payments' table. I would like to update the Payments records on database A automatically after Payments records on database B had been updated. I can't use replication because both tables might having different records and some records are the same. Hope can get any assistance here, thank you.
Best Regards,
Hans
I have not yet succeeded in getting an aswer to this in a previous post, so I'll try again and rephrase the question
I have 2 fields, 1 called 'Created' the other 'Updated'
I would like to create a function, user procedure ,whatever in SQL something along the lines of...
FUNCTION myUID()
RETURN Date(Today)+Time(Now)+USERNAME
END FUNCTION
so that the value returned by the above pseudo code is something like '20080526T21:01:05.620SamL' where the date part is in yyyy0m0d format
I have got this working fine for the default 'Created' field but the calculated (and persisted) field comes up with something about being non-deterministic and refuses to play
Clearly something along these lines is a very straightforward requirement (I have it working fine in my 20+ year old database) , but have spent a week trying to get an answer (even from this forum) without success, so would be grateful for any help that you can provide me with to get round this barrier
Hi -
apologies if this is not the right forum for this - I've searched a bit and this seems to be the best fit.
I have the following problem: I want to update records in a table that fit certain criteria. The way the insert logic works make sure that there will always be only one record that fits the criteria and I'd like to get the ID value of that record once the update went through. So here is what I tried:
1 UPDATE Timeslot
2 SET StartTime = @StartTime, EndTime = @EndTime
3 WHERE (ProfessionalID = @ProfessionalID) AND (ProviderLocationID = @ProviderLocationID) AND (RequestID IS NULL) AND (StartTime > @StartTime) AND
4 (EndTime < @EndTime);
5 SELECT SCOPE_IDENTITY()
My hope was that the select scope_identity would return the Timeslot ID of the row that was affected, but it doesn't. How do I get that row?
Thanks!!!
Oliver
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies View RelatedI have some set of records in my table.
The same set of records will be updated often. Now I have a column as "lastupdated"
While i am displaying the records in a datagrid, The LAST UPDATED record should only be displayed.
Means, the recently updated records should be displayed in datagrid.
Pls give me the sql code / i am also in need of a Stored procedure for this.
I am working in SQL 2005
I want to build an windows application by using a visual C# to Notify the user that his data in the database had been changed ..such like "New Message In Your Mail Box Alert"..So I need to know if there is way that to let the SQL Server send a notify (just like Trigger) ..
View 1 Replies View RelatedDoes anyone know how to get the indentity of the last updated record in a table. I need it for a cascading trigger.
Thank you,
Jody
I am trying to write a trigger that, on an update, will check to see if more than one record is being updated. If more than one record is being updated, rollback the transaction and print a message. If not, then commit the transaction and print an OK message.
My problem is I am having troubles writing this trigger. I will post my SQL trigger code so far.
I am new with Triggers, so any help or advice is appreciated.
Code:
CREATE TRIGGER trgPaperCheck
ON BOOK
AFTER UPDATE
AS
IF UPDATE(Paperback)
BEGIN
DECLARE @count AS INT
SELECT @count = COUNT(Paperback)
FROM Book
IF @count > 1
BEGIN
PRINT('Only one Book record can be updated at a time!')
ROLLBACK TRANSACTION
END
ELSE IF @count =1
BEGIN
PRINT('Paperback Updated')
COMMIT TRANSACTION
END
END
Hi,
I was opening a web page, that has a grid view representing the records of a table, I updated a record of the sql table by mistake, but I am not sure which record,
is there any way in Sql server to get the last record just updated few minutes ago. I hyave admin permissions on the DB.
Also, is there a way to know the value that was just there before the changes?
Thanks a lot.
Hi
I have an application which get any change from database using sql dependency. When a record is inserted or updated it will fire an event and my application get that event and perform required operation.
On the event handler I am usin select ID,Name from my [table];
this will return all record from database.
I just want to get the record which is inserted or updated.
Can u help me in that.
Take care
Bye
I would like to show when leads updated last their records in database. An automated report that tells me when the last date was that the leads updated an entry, only 1 entry per lead.
select Lead,LastUpdated from dbo.KPITbl
I have a table with data that looks like this:
Lead LastUpdated
----------- -----------------------
JOHN SMITH 2008-03-26 08:45:00
JOHN SMITH 2008-03-20 09:33:00
MEG RYAN 2008-02-21 16:16:00
JOHN SMITH 2008-02-21 16:19:00
MEG RYAN 2008-02-21 16:22:00
JOHN SMITH 2008-03-28 16:10:00
JOHN SMITH 2008-03-28 08:49:00
JOHN SMITH 2008-03-23 19:23:00
MARK MCRAE 2008-03-27 03:12:00
MARK MCRAE 2008-03-26 08:48:00
MARK MCRAE 2008-03-26 08:46:00
JOHN SMITH 2008-03-26 08:47:00
JOHN SMITH 2008-03-26 08:48:00
ALLAN WHITE 2008-03-26 08:43:00
ALLAN WHITE 2008-03-26 08:40:00
JOHN SMITH 2008-03-26 08:48:00
Thank you appreciate it.
Hi,
I was opening a web page, that has a grid view representing the records of a table, I updated a record of the sql table by mistake, but I am not sure which record,
is there any way in Sql server to get the last record just updated few minutes ago. I hyave admin permissions on the DB.
Also, is there a way to know the value that was just there before the changes?
Thanks a lot.
We are getting data feed from Oracle database in our project. Everyday we will need to track if any rows got inserted/updated/deleted in the source and get that update right into our data warehouse.
Currently we are taking a dump of the required table (as it is) to our staging DB and comparing it with previous day data to track the changes (column by column comparison). This approach is working currently but has performance bottleneck. There is no tracking column (eg. last modified date or time) in source that will give us any idea of what got changed. Also there is no identity key or primary key in the source data.
Is there a way in SQL Server to get that inserted/updated records only instead of comparing column by column to track the changes?
Hi All In My application when i want to work with sqldatasource for updation and delteion tasks it is working properly when all the columns consists the data. If any of the column consists the null values its not updating and deleting. Advices are needed.Thank uBaba
View 4 Replies View RelatedI'm using a Merge statement to update/insert values into a table. The Source is not a table, but the parameters from a Powershell script. I am not using the Primary Key to match on, but rather the Computer Name (FullComputerName).
I am looking on how-to return the Primary Key (ComputerPKID) of an updated record as "chained" scripts will require a Primary Key, new or used.As an aside: the code below does return the newly generated Primary Key of an Inserted record.
CREATE PROCEDURE [dbo].[usp_ComputerInformation_UPSERT](
@FullComputerName varChar(50) = NULL
,@ComputerDescription varChar(255) = NULL
,@ComputerSystemType varChar(128) = NULL
,@ComputerManufacturer varChar(128) = NULL
[code]....
I wanted to know if it is possible to run a stored proc (report) when a new record is inserted / updated into a certain table. Also if it could do so for records with a column that meet a certain criteria ie. sell description like '%test%'
View 2 Replies View Related
Hi,
I am creating update trigger(After) on a table.I want to catch an updated row and insert the values of this row into
a new table.How can i catch this row while creating a trigger after update.
Hi,
I'm using sql-2005.
I want to update several columns in different tables whenever an update is happend on specific table. I have a trigger for that which update all the relevant places when it fires.
I want to do this update only if certains columns were changed, otherwise - do anything, to reduce performance.
How Can I know which columns were updated inside the trigger? The tables has many columns and only if 2 of them were changed then I need to update other tables.
Many thanks,
Nira.
Can anyone help me figure out how to set up a new table using SSIS with a record field that will generate a unique number? The record number is also the primary key in the table. I did this about a year ago with a bit of help, but once you get the language right and initiate the creation, the text for defining the table is no longer available. I have seen a lot of references for MySQL and MS SQL 2000 and an AUTO_Generate or a UNIQUE ID. None of this works within MS SQL 2005 in SSIS.
Thanks!
Jim
I wrote a stored proc to be implemented in a datagrid. I went and used it on a record to update some information and it updated THE WHOLE DATABASE WITH THAT ONE RECORD..
IF anyone could shead some light on what I'm doing wrong that would be great.
Here is the syntax for my stored proc.
CREATE PROC updateResults2
@id int, @address1 nvarchar (50), @address2 nvarchar (50), @CITY nvarchar (33), @ST nvarchar (10), @ZIP_OUT nvarchar (5), @ZIP4_OUT nvarchar (4), @home_phone nvarchar (22), @NEWPhone nvarchar (20)
AS
UPDATE Results
SET address1 = @address1,
address2 = @address2,
CITY = @CITY,
ST = @ST,
ZIP_OUT = @ZIP_OUT,
ZIP4_OUT = @ZIP4_OUT,
home_phone = @home_phone,
NEWPhone = @NEWPhone
GO
As said previously it ran but it updated the WHOLE DATABASE with the same change (WHICH I DIDNT WANT IT TO DO)!!
Thanks in advance.
RB
Using MS SQL 2000I have a stored procedure that processes an XML file generated from anAudit program. The XML looks somewhat like this:<ComputerScan><scanheader><ScanDate>somedate&time</ScanDate><UniqueID>MAC address</UniqueID></scanheader><computer><ComputerName>RyanPC</ComputerName></computer><scans><scan ID = "1.0" Section= "Basic Overview"><scanattributes><scanattribute ID="1.0.0.0" ParentID=""Name="NetworkDomian">MSHOMe</scanattribute>scanattribute ID = "1.0.0.0.0" ParentID="1.0.0.0", etc etc....This is the Update portion of the sproc....CREATE PROCEDURE csTest.StoredProcedure1 (@doc ntext)ASDECLARE @iTree intDECLARE @assetid intDECLARE @scanid intDECLARE @MAC nvarchar(50)CREATE TABLE #temp (ID nvarchar(50), ParentID nvarchar(50), Namenvarchar(50), scanattribute nvarchar(50))/* SET NOCOUNT ON */EXEC sp_xml_preparedocument @iTree OUTPUT, @docINSERT INTO #tempSELECT * FROM openxml(@iTree,'ComputerScan/scans/scan/scanattributes/scanattribute', 1)WITH(ID nvarchar(50) './@ID',ParentID nvarchar(50) './@ParentID',Name nvarchar(50) './@Name',scanattribute nvarchar(50) '.')SET @MAC = (select UniqueID from openxml(@iTree, 'ComputerScan',1)with(UniqueID nvarchar(30) 'scanheader/UniqueID'))IF EXISTS(select MAC from tblAsset where MAC = @MAC)BEGINUPDATE tblAsset set DatelastScanned = (select ScanDate fromopenxml(@iTree, 'ComputerScan', 1)with(ScanDate smalldatetime'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScan set ScanDate = (select ScanDate fromopenxml(@iTree,'ComputerScan', 1)with(ScanDate smalldatetime 'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScanDetail set GUIID = #temp.ID, GUIParentID =#temp.ParentID, AttributeValue = #temp.scanattribute, LastModified =getdate()FROM tblScanDetail INNER JOIN #tempON (tblScanDetail.GUIID = #temp.ID ANDtblScanDetail.GUIParentID =#temp.ParentID AND tblScanDetail.AttributeValue = #temp.scanattribute)WHERE MAC = @MAC!!!!!!!!!!!!!!!!!! THIS IS WHERE IT SCREWS UP, THIS NEXT INSERTSTATEMENT IS SUPPOSE TO HANDLE attributes THAT WERE NOT IN THE PREVIOUSSCAN SO CAN NOT BE UDPATED BECAUSE THEY DON'T EXISTYET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!INSERT INTO tblScanDetail (MAC, GUIID, GUIParentID,ScanAttributeID,ScanID, AttributeValue, DateCreated, LastModified)SELECT @MAC, b.ID, b.ParentID,tblScanAttribute.ScanAttributeID,@scanid, b.scanattribute, DateCreated = getdate(), LastModified =getdate()FROM tblScanDetail LEFT OUTER JOIN #temp a ON(tblScanDetail.GUIID =a.ID AND tblScanDetail.GUIParentID = a.ParentID ANDtblScanDetail.AttributeValue = a.scanattribute), tblScanAttribute JOIN#temp b ON tblScanAttribute.Name = b.NameWHERE (tblScanDetail.GUIID IS NULL ANDtblScanDetail.GUIParentID ISNULL AND tblScanDetail.AttributeValue IS NULL)ENDELSEBEGINHere are a few table defintions to maybe help out a little too...if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblScan_tblAsset]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblScan] DROP CONSTRAINT FK_tblScan_tblAssetGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblAsset]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblAsset]GOCREATE TABLE [dbo].[tblAsset] ([AssetID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[AssetTypeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DatelastScanned] [smalldatetime] NULL ,[NextScanDate] [smalldatetime] NULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NULL) ON [PRIMARY]GO-----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScan]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblScan]GOCREATE TABLE [dbo].[tblScan] ([ScanID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetID] [int] NULL ,[ScanDate] [smalldatetime] NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScanDetail]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblScanDetail]GOCREATE TABLE [dbo].[tblScanDetail] ([ScanDetailID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOTNULL ,[ScanID] [int] NULL ,[ScanAttributeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[GUIID] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL,[GUIParentID] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[AttributeValue] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO------------------------------------------------------------My problem is that Insert statement that follows the update intotblScanDetail, for some reason it just seems to insert everything twiceif the update is performed. Not sure what I did wrong but any helpwould be appreciated. Thanks in advance.
View 9 Replies View RelatedI have a Trigger Instead of Update.
When I Update my table, the trigger runs correctly but my table never is updated.
Here is my problem: I've created a table in MSSQL named MyReferences and then a typed dataset to connect to it.
Then I realized that I needed to add a column to MyReferences table and then I did it.
The problem is that I cannot find a way to add the new column to the typed dataset. I am unable to view it in the available columns.
Can anyone help me?
I'm using Visual Studio 2005 sp1 and C#.
Best regards
Alessandro
Hi all. I have this problem:
on insert in a new table a have to change one column before insert.
I wrote this trigger:
create trigger SUBSCR_ID_TRANSFER ON dbo.SalesOrderExtensionBase AFTER INSERTAS BEGIN SET NOCOUNT ON;DECLARE @OpportunityID uniqueidentifier;DECLARE @subscrId uniqueidentifier;declare @salesorderid uniqueidentifier;set @salesorderid = (select SalesorderID from inserted)SET @OpportunityID = (SELECT OpportunityId FROM SalesOrderBase where SalesOrderID=@salesorderid)SET @subscrId = (SELECT New_old_subscridId from OpportunityExtensionbase where OpportunityID=@OpportunityID)Update inserted set New_old_subscridId = @subscrIdENDbut SQL Rise the error "The inserted values can not be modified"
how to slove this issue.
Thanks.
Hi
Apologies if this is a silly question
I have a basic table "Customer" which has
Id
Address1
Address2
Address3
Town
County
Postcode
SearchData
After I insert or Update a row in this table I need to update the SearchData column
with
UPPER(ADDRESS1) + UPPER(ADDRESS2) + UPPER(TOWN) + UPPER(POSTCODE)
only for that Id
I'm sure this is only a basic update but all the examples I can find are for inserting into other tables not the row itself.
Regards
David
I am trying to update a record in a table based off of criteria of another record in the table.
So suppose I have 2 records
ID owner type
1 5678 past due
2 5678 late
So, I want to update the type field to "collections" only if the previous record for the same record is "past due". Any ideas?
Hi All,
I am trying to create package something like that..
1- New Customer table as OleDB source component
2- Lookup component - checks customer id with Dimension_Customer table
3- And if same customer exist : I have to update couple fields on Dimension_Customer table
4- if it does not exist then I have insert those records to Dimension_Customer table
I am able to move error output from lookup to Dimension_Customer table using oledb destination
but How can I update the existing ones?
I have tried to use oledb command but somehow it didnt work
my sql was like this : update Dimension_Customer set per_X='Y', per_Y= &Opt(it should come from lookup)
I will be appreciated if you can help me...
I know 2008 MS SQL Server has a timestamp data type that adds date and time when the rows are inserted. Is there a way to automatically update the date and time when the rows are updated?
View 5 Replies View RelatedI get this error when I look at the state of my SQLresults object. Have I coded something wrong?Item = In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. conn.Open()
Dim strSql As String
strSql = "INSERT INTO contacts (companyId, sourceId, firstName, lastName, middleName, birthday, dateCreated)" _
& "VALUES ('" & companyId & "', '" & sourceId & "', '" & firstName & "', '" & lastName & "', '" & middleName & "', '" & birthday & "', '" & now & "') SELECT @@IDENTITY AS 'contactId'"
Dim objCmd As SqlCommand
objCmd = New SqlCommand(strSql, conn)
Dim aSyncResult As IAsyncResult = objCmd.BeginExecuteReader()
If aSyncResult.AsyncWaitHandle.WaitOne() = True Then
Dim sqlResults As SqlClient.SqlDataReader
sqlResults = objCmd.EndExecuteReader(aSyncResult)
Dim cid As Integer
cid = sqlResults.Item("contactId")
Me.id = cid
conn.Close()
Return cid
Else
Return "failed"
End If
I'm working on databases where statistics of some indexes (tables) are changing too frequently. Once I update them manually, one minute after they get 10-20% change, and five minutes after they get over 100% change. Tables get updated very frequently (multiple times in a second).
When I run a query to read from sys.stats, sys.dm_db_stats_properties and other dynamic views, I see that they were last updated when I did it manually, but the change rate overpassed the 500+20% (tables have multiples of 10K rows). Auto create and update statistics are set to true on all databases, and I don't know why sql server does not do that automatically.