Automattically Excute A Procedure
Jun 3, 2006I am using MS sql 2000. I think I need to use SQL agent to run a job, but not sure how to call up the procedure! The procedure runs collectly when run from SQL query.
Thank You,
Ernie
ADVERTISEMENT
Help: Why Excute A Stored Procedure Need To More 30 Seconds, But Direct Excute The Query Of This Procedure In Microsoft SQL Server Management Studio Under 1 Second
May 23, 2007Hello to all,
I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted.
but i excute it with the same parameters direct in Microsoft SQL Server Management Studio , It takes only under 1 second time
I don't know why?
Maybe can somebody help me?
thanks in million
best Regards
Pinsha
My Procedure Codes are here:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output )
AS
BEGIN
if ( @Level = 1)
begin
select @Path = convert(varchar(100),IDMember)
from wtcomValidRelationships
where wtcomValidRelationships.[IDMember]= @IDMember
and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0
end
if (@Level = 2)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0
end
if (@Level = 3)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0
end
if ( @Level = 4)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0
end
if (@Level = 5)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0
end
if (@Level = 6)
begin
select top 1 @Path = '' from wtcomValidRelationships
end
END
Question About Excute Store Procedure
Mar 14, 2004Hi, all
i create a function("changefilepermission") to execute a procedure ("grant_file_access") to change the file permission. i click the permission checkbox to change new permission, after that i will click the submit button to update change to the database. but it does not change to the database. this is my part of code. is anybody can give me a help?
thanks in advanced!!!!!!!!!
Private Sub btnsubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
Dim FileTitle As New String("")
Dim FileName As New String("")
FileName = DGPermission.Items.Item(0).Cells(0).Text 'retrieve filename from datagrid
FileTitle = DatabaseCommand(userid, "fa_title", filename) ' retrieve the filetitle from table
Dim permission As Char ' set the permission value
If (CkRead.Checked) Then
Permission = "r"
ElseIf (CkWrite.Checked) Then
Permission = "w"
ElseIf (CkExecute.Checked) Then
Permission = "o"
End If
Try
' call the store procedure function by passing 4 value
ChangeFileAccess(userid, FileName, FileTitle, Permission) '
Catch ex As Exception
lblErrorMsg.Text = ex.ToString
End Try
End Sub
' execute store procedure function
Public Sub ChangeFileAccess(ByVal userid As String, ByVal DiskFilename As String, ByVal Title As String, ByVal Access As Char)
Dim UpdateCommand As SqlCommand
UpdateCommand = New SqlCommand
With UpdateCommand
.Connection = SqlConnection
.CommandType = CommandType.StoredProcedure
.CommandText = "Grant_File_Access"
.Parameters.Add("@vu_id", SqlDbType.VarChar, 20).Value = userid
.Parameters.Add("@DiskFilename", SqlDbType.VarChar, 64).Value = DiskFilename
.Parameters.Add("@Title", SqlDbType.VarChar, 50).Value = Title
.Parameters.Add("@Access", SqlDbType.Char, 1).Value = Access
End With
Try
UpdateCommand.Connection.Open()
UpdateCommand.ExecuteReader() ' call the store procedure
UpdateCommand.Connection.Close()
Catch ex As Exception
lblErrorMsg.Text = ex.ToString
End Try
End Sub
How To Excute Stored Procedure That Insert Record And Return Last Inserted Value
Jul 18, 2007Dear all,
I am using C# , asp.net and sql server 2005.
Let me explain the situation.
I have written procedure to insert data into the table and return last inserted value by @@identity variable. Now my question is how do I execute this process so that I can
Get last inserted variable values
Please help
thanks
Excute Xp_cmdshell Run BCP In SQL Scheduler
May 26, 1999Hi,
I have a schedule task with the following command:
xp_cmdshell 'bcp DBName.TBLOwner.TBLName in h:datafile.txt /fh:formatfile.fmt /Sservername /Usa /Ppassword'
The error message that I recieved is "Unable to open Host file. I can run the BCP command in Dos C prompt successfully, but
cannot run this in the SQL Server Scheduler. H drive is net use to the Server and it is where my data file and format file located.
Does anyone has any idea? I do appreciate for your help.
How To Excute Package In Sequence
Jun 14, 2006How to excute package in sequence . i have an requirement like this the package should execute in a sequence
1.PKG1
2.PKG2
3.PKG3
and in some case PKG1,.PKG2,.PKG3 shoule run parallel.
Thanks & Regards
Jegan.T
Can't Excute SSIS Package
Feb 26, 2007So everything was working great. Now I have a few problems. The little play button is no longer available for me to puch and when I try a right click execute package a get a "Unexpected internal error: Invalid state for operation. (Microsoft Visual Studio)". Does anyone know how to fix this? Also when I try and copy tasks from within my package I get a "An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)"
followed by "Could not copy object 'package name' to the clipboard.
(Microsoft.DataTransformationServices.Design)" and then "Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)"
Does anyone what might be wrong
Thanks in advance
Variable Problem In Excute SQL Task
Nov 27, 2006Hi there
I have a bit confusing problem,
In Execute SQL Task I am having a stmt like : (Select * from Emp where EmpNm=?) also I m passing variable value through Parameter Mapping.
Problem I am facing is that if I remove brakets from both end task is executed successfull but if I but those braket as they are task execution fails. and i need those brakets as it is inside a if statement.
Problem is with parameter passing ,even if i put some value as EmpNm="ABC " with brakets, it runs successfully
Any Solution to above problem
Thanks and Regards
Rahul Kumar, Software Engineer
How Do I Excute DBCC DBreindex From Public Group
Aug 24, 2000Hi All
Could you guys help me i have small problem in running dbcc dbreindex.I could run this command from dbo,sysadmin and
Object owner logins to rebuild the index but what i want to do is i want to run this command in a stored procedure.
this is also fine if i run the stored procedure any one of above logins it executes when i grant exec permission on this procedure
to public it will not execute in public group since public group is not a owner of this object..
How do i excute DBCC DBreindex from public group.Could you please help me.....................
How Do I Start A Transaction :-Dataflow Task + Excute SQL Task
Mar 7, 20071 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
The Old Inability To Toggle/change/switch Between ALTER PROCEDURE &<---&> CREATE PROCEDURE Bug (or Is It A Feature?)
Apr 1, 2007Keep in mind this is my first compiled SQL program Stored Procedure(SP), copied from a book by Frasier Visual C++.NET in Visual Studio2005 (Chap12). So far, so theory, except for one bug (feature?)below. At some point I'm sure I'll be able to laugh about this, akinto forgeting a semi-colon in C/C++, but right now it's frustrating(time to sleep on it for a while).Problem--For some reason I get the error when trying to save files where twotables (called Author and Content), linked by a single key, form arelationship.By simple comparison of the source code in the textbook and my program(below) I found the difference: instead of, like in the textbook, theStored Procedure (SP) starting with "CREATE PROCEDURE", it*automatically* is (was somehow) given the name of 'ALTER PROCEDURE'and I cannot change this to "CREATE PROCEDURE" (you get an error in MSVisual Studio 2005 Pro edition of "There is already an object namedXXX in the database", see *|* below). No matter what I do, the SP isalways changed by Visual Studio 2005 to 'ALTER PROCEDURE'!!!(otherwise it simply will not save)Anybody else have this happen? (See below, others have had this happenover the years but it's not clear what the workaround is)Keep in mind this is my first attempt and I have ordered somespecialized books on SQL, but if this is a common problem (and Isuspect it's some sort of bug or quirk in VS2005), please let me know.Frankly I think SQL as done by VS2005 is messed up.Here are two Usenet threads on this problem:(1) http://tinyurl.com/2o956m or,http://groups.google.com/group/micr...1454182ae77d409(2) http://tinyurl.com/2ovybv or,http://groups.google.com/group/micr...9e5428bf0525889The second thread implies this is a bug--any fix?Also this bug might be relate to the fact I've switched (and notrebooted) from Administrator to PowerUser after successfully changingthe permissions in the SQL Server Management Studio Express (see thisthread: http://tinyurl.com/2o5yqa )Regarding this problem I might try again tommorrow to see if rebootinghelps.BTW, in the event I can't get this to work, what other SQL editor/compiler should I use besides MS Visual Studio 2005 for ADO.NET andSQL dB development?RL// source files// error message:'Authors' table saved successfully'Content' table- Unable to create relationship 'FK_Content_Authors'.The ALTER TABLE statement conflicted with the FOREIGN KEY constraint"FK_Content_Authors". The conflict occurred in database "DCV_DB",table "dbo.Authors", column 'AuthorID'.// due to the below no doubt!--CREATE PROCEDURE dbo.InsertAuthor /* THIS IS CORRECT (what I want)'CREATE PROCEDURE' not 'ALTER PROCEDURE'*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--ALTER PROCEDURE dbo.InsertAuthor /* WRONG! I want 'CREATE PROCEDURE'not 'ALTER PROCEDURE' but VS2005 won't save it as such!!!*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--*|* Error message given: when trying to save CREATE PROCEDURE StoredProcedure: "There is already an object named 'InsertAuthor' in the dB
View 11 Replies View RelatedSqlDataSource.SelectParameters Causing Procedure Or Function Stored Procedure Has Too Many Arguments Specified.
Sep 12, 2006 Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
Gridview / SqlDataSource Error - Procedure Or Function &<stored Procedure Name&> Has Too Many Arguments Specified.
Jan 19, 2007Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies View RelatedError : 2827: Procedure In Procedure Buffer 0x7acad6c Is Not Properly Hashed
Mar 19, 1999Error : 2827, Severity: 20, State: 1
Procedure <proc name> in procedure buffer 0x7acad6c is not properly hashed.
...??
any ideas?
thanks
SQL Server 2012 :: CLR Procedure Takes Ages To Pass TVP To Stored Procedure?
Jan 21, 2014On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
How Can I Assign A Stored Procedure As Cursor's Data Source In AStored Procedure?
Oct 8, 2007How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
Help With TSQL Stored Procedure - Error-Exec Point-Procedure Code
Nov 6, 2007I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
Is There A Way To Find The Last Procedure Execution Time If Procedure Updates The Existing Table And There Is No Flags/triggers?
Aug 21, 2007View 8 Replies View Related
Procedure Or Function 'stored Procedure Name' Expects Parameter Which Was Not Supplied
Mar 26, 2007Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
(Could Not Find Stored Procedure ''.) When Calling A User Defined Procedure
Feb 4, 2008Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedStored Procedure In Query Analyzer Vs Linked Procedure In MS Access
Jan 12, 2007For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
Access Result Set From Storede Procedure W/in A Stored Procedure
Jan 24, 2004Hi All
I have a stored procedure, sp_GetNameDetail, which return a one row, multiple columns result set.
Yet I have another storede procedure which would call sp_GetNameDetail, and would like to access this result set. Is there a way I can do this?
Thanks,
SQL 2012 :: Clear Procedure Cache Of A Single Procedure?
Sep 12, 2014Is there anyway to clear the procedure cache of a single procedure?
View 9 Replies View RelatedMultiple Stored Procedure...or 1 Dynamic Procedure?
Jul 3, 2007Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
Cheers,
Justin
Getting Data From A Storeed Procedure In A Stored Procedure
Jul 23, 2005What I am looking to do is use a complicated stored procedure to getdata for me while in another stored procedure.Its like a view, but a view you can't pass parameters to.In essence I would like a sproc that would be like thisCreate Procedure NewSprocASSelect * from MAIN_SPROC 'a','b',.....WHERE .........Or Delcare Table @TEMP@Temp = MAIN_SPROC 'a','b',.....Any ideas how I could return rows of data from a sproc into anothersproc and then run a WHERE clause on that data?ThanksChris Auer
View 4 Replies View RelatedCalling A Stored Procedure From ADO.NET 2.0-VB 2005 Express: Working With SELECT Statements In The Stored Procedure-4 Errors?
Mar 3, 2008Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Difference Between Procedure And Stored Procedure
Dec 10, 2003What is the Difference between procedure and stored procedure? I know only abaout stored procedure.
Thnaks
m_nekanti
Can I Call A Procedure In One Database From A Procedure In Another?
Oct 5, 2007
Hi,
I have an integration solution that backs into two databases. Database A is custom and Database B is integrated from a COTS product. The manufacturer of B supplies a formal interface as stored procedures (and I intend to honor that contract by limiting my access to B through those stored procs).
Now, I have a search that is going to involve a subselect in the form of the following pseudocode:
select a,b from dbA.user.TableX where exists (select a from dbB.user.TableY)
I am trying to avoid creating 2 temporary cursors in the integration application and doing things in-memory (b/c of performance concerns).
So, my q is:
How can I make this happen within database A?
T-SQL (SS2K8) :: One Stored Procedure Return Data (select Statement) Into Another Stored Procedure
Nov 14, 2014I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
SQL Server 2014 :: Embed Parameter In Name Of Stored Procedure Called From Within Another Stored Procedure?
Jan 29, 2015I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
Connect To Oracle Stored Procedure From SQL Server Stored Procedure...and Vice Versa.
Sep 19, 2006I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Stored Procedure Returning 2 Result Sets - How Do I Stop The Procedure From Returning The First?
Jan 10, 2007I hvae a stored procedure that has this at the end of it:
BEGIN
EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, ''
END
SET NOCOUNT OFF
SELECT Something
FROM Something
Joins…..
Where Something = Something
now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure.
What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
Grab IDENTITY From Called Stored Procedure For Use In Second Stored Procedure In ASP.NET Page
Dec 28, 2005I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View Related