I have an extra colum in a matrix report, that i am trying to use as the AVG Monthly_DB size. But when i try to use this
AVG(SUM(MONTHLY_DB.VALUE)) it does not work. I get an error messege that reads... Aggregate functions cannot be nested in aggregate functions. What do i do? I tried to do it in the code, but had no luck doing it that way too.
Hi,
I have an issue. When I am performing a Merge Join using two fields of type
DT_WSTR on both sides of the Join, the Dataviewer after the Join only shows the left side 2 key
fields having values populated but both fields from the right hand side as being NULL. The Dataviewers I put in before the join show both sides of the join fields being populated ( 2 sides x 2 fields ). If I remove one of the fields from the join it shows both fields from the left side and the right side of the join being populated . I am trying to knock out duplicate values from the insert using 'genuine' Nulls from the right hand side so I need both parts of the 'Key'. I have checked the adnvanced tab that ignores Case etc but has had no effect.
I am using the technique from here : http://www.sqlis.com/311.aspx
Is this an SSIS bug ??? It is driving me up the wall.
Help would be much appreciated please.
Thanks
Jon
I have just started using SQL Server reporting services and am stuck with creating subreports.
I have a added a sub report to the main report. When I right click on the sub report, go to properties -> Parameters, and click on the dropdown for Parameter Value, I see all Sum and Count fields but not the data fields.
For example, In the dropdownlist for the Parameter value, I see Sum(Fields!TASK_ID.Value, "AppTest"), Count(Fields!TASK_NAME.Value, "CammpTest") but not Fields!TASK_NAME.Value, Fields!TASK_ID.Value which are the fields retrieved from the dataset assigned to the subreport.
When I manually change the parameter value to Fields!TASK_ID.Value, and try to preview the report, I get Error: Subreport could not be shown. I have no idea what the underlying issue is but am guessing that it's because the field - Fields!TASK_ID.Value is not in the dropdown but am trying to link the main report and sub report with this field.
Am I missing something here? Any help is appreciated.
Thanks,
Sirisha
How can I create a Table whose one field will be 'tableid INT IDENTITY(1,1)' and other fields will be the fields from the table "ashu".
can this be possible in SQL Server without explicitly writing the"ashu" table's fields name.
sir
I have got this error message to establish connction with recordset vb .net, Can you please rectify this
Too many arguments to 'Public Overridable ReadOnly Default Property Fields() As ADODB.Fields'
my code like this
rs = New ADODB.Recordset
rs.Open("Select * from UserLogin where userid='" & txtUserName.Text & "'", gstrDB, DB.CursorTypeEnum.adOpenStatic)
If txtUserName.Text = rs.Fields.Append(userid) Then
MsgBox("OK", MsgBoxStyle.OKOnly, "Confirmation")
End If
thanks
Hello !I'm trying to update one table field with another table searched firstdate record.getting some problem.If anyone have experience similar thing or have any idea about it,please guide.Sample case is given below.Thanks in adv.T.S.Negi--Sample caseDROP TABLE TEST1DROP TABLE TEST2CREATE TABLE TEST1(CUST_CD VARCHAR(10),BOOKING_DATE DATETIME,BOOKPHONE_NO VARCHAR(10))CREATE TABLE TEST2(CUST_CD VARCHAR(10),ENTRY_DATE DATETIME,FIRSTPHONE_NO VARCHAR(10))DELETE FROM TEST1INSERT INTO TEST1 VALUES('C1',GETDATE()+5,'11111111')INSERT INTO TEST1 VALUES('C1',GETDATE()+10,'22222222')INSERT INTO TEST1 VALUES('C1',GETDATE()+15,'44444444')INSERT INTO TEST1 VALUES('C1',GETDATE()+16,'33333333')DELETE FROM TEST2INSERT INTO TEST2 VALUES('C1',GETDATE(),'')INSERT INTO TEST2 VALUES('C1',GETDATE()+2,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+11,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+12,'')--SELECT * FROM TEST1--SELECT * FROM TEST2/*Sample dataTEST1CUST_CD BOOKING_DATE BOOKPHONE_NOC12005-04-08 21:46:47.78011111111C12005-04-13 21:46:47.78022222222C12005-04-18 21:46:47.78044444444C12005-04-19 21:46:47.78033333333TEST2CUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.800C12005-04-05 21:46:47.800C12005-04-14 21:46:47.800C12005-04-15 21:46:47.800DESIRED RESULTCUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.80011111111C12005-04-05 21:46:47.80011111111C12005-04-14 21:46:47.80044444444C12005-04-15 21:46:47.80044444444*/
View 3 Replies View RelatedI am using MS SQL 2012. I have a table that contains all the data that I need, but I need to summarize the data and also add up decimal fields while at it. Then I need a total of those added decimal fields. My data is like this:
I have Providers, a unique ID that Providers will have multiples of, and then decimal fields. Here are my fields:
ID, provider_name, uniq_id, total_spent, total_earned
Here is sample data:
1, Harbor, A07B8, 500.00, 1200.00
2, Harbor, A07B8, 400.00, 800.00
3, Harbor, B01C8, 600.00, 700.00
4, Harbor, B01C8, 300.00, 1100,00
5, LifeLine, L01D8, 700.00, 1300.00
6, LifeLine, L01D8, 200.00, 800.00
I need the results to be just 3 lines:
Harbor, A07B8, 900.00, 2000.00
Harbor, B01C8, 900.00, 1800.00
LifeLine, L01D8, 900.00, 2100.00
But then I would need the totals for the Provider, so:
Harbor, 1800.00, 3800.00
I would like to search a table for a phrase, or for a partial phrase,eg on table product - for name or description, or name + descprition.How does one say select * from product where name + description like%phrase%or contains phraseCurrently I can get where name, or where descriotion like %phrase%,eg, where name like krups, or where description like coffee makerBut if I search for where name like %krups coffee maker% i get noresults. krups is in the name field, coffee maker is in thedescription field.Thanks,-M
View 1 Replies View RelatedPardon me if this question is too elementary. I am trying to create a trigger that will cause certain datafields to be updated with values from other data fields in the same row when a certain column, created specifically to fire the trigger, is updated. The purpose of this is to reduce data entry by field personnel.I think I have the create trigger statement correct, but I'm a little confused on the update statement.
In a nutshell, how can I write something like:
UPDATE "TABLENAME"
SET DATAFIELD1 = DATAFIELD2
WHERE RECORDNUMBER = (THE SAME RECORD NUMBER)
I do know that I have to ensure that sp_dboption Recursive Triggers value is set to false, thanks.
I have a list of items in one table and a field (pageName) in another table that may contain one of the aforementioned items somewhere within that field. There is no fixed position within the field where the itemNo may be so I can't just use SUBSTRING(pageName,2,5) in(select itemNo from tblItem).
Logically, it's like I need to combine IN and LIKE: select pageName where pageName LIKE IN %select itemNo from tblitemNo%..LIKE can only handle one comparison string.
Hi people
My users are having troubles with link to default drillthrough report when reports are exported to excel (they REALLY don't like this behavior ), so I decided set all of them disabled in report model, this work fine, but calculated field in reports has this drillthrough link.
Let me show you the situation. Entity Product has an UnitaryCost field, I set the EnableDrillthrough Property in False so when I export a report with this field, no link is shown.
But if I create in the report a calculated field Round(UnitaryCost) this field has a Drillthrough Link
Is this the standard and expected behavior? or its simply a BUG?
Have I done something wrong in my model? and in this case, How I can correct this?
regards.
Julio Diaz.
My error is that 'Name tr is not declared' tr.Rollback() I tried moving the 'Dim tr As SqlTransaction' outside the try but then I get 'Variable tr is used before it si assinged a value'.
What is the correct way? Try conn.Open() Dim tr As SqlTransaction tr = conn.BeginTransaction() cmdInsert1.Transaction = tr cmdInsert1.ExecuteNonQuery() cmdInsert2.Transaction = tr cmdInsert2.ExecuteNonQuery() cmdInsert3.Transaction = tr cmdInsert3.ExecuteNonQuery() tr.Commit() Catch objException As SqlException tr.Rollback() Dim objError As SqlError For Each objError In objException.Errors Response.Write(objError.Message) Next Finally conn.Close() End Try
I have the below procedure that will not work- I must be losing my mind, this is not that difficult - mental roadblock for me.
Using SQL Server 2000 to create SP being called by ASP.Net with C# code behind
stored procedure only returns if input exactly matches L_Name
PROCEDURE newdawn.LinkNameLIKESearch @L_Name nvarchar(100)AS SELECT [L_Name], [L_ID], [C_ID], [L_Enabled], [L_Rank], [L_URL] FROM tblContractorLinkInfo WHERE L_Name LIKE @L_Name RETURN
I tried: WHERE L_Name LIKE ' % L_Name % ' no luck. What am I missing?
Thank you
SP below is not work.It gives null for @kaysay
I used parametric table name. Is this the problem?
My aim to calculate record count of a table
Thanks.
CREATE PROCEDURE Tablodaki_Kayit_Sayisi(@TABLO varchar(30))AS
Declare @kaysay bigintDeclare @SQLString nvarchar(100)Declare @Param nvarchar(100)
Set @SQLString = N'Select @kaysayOUT = count(BELGE) From ' + @TABLOSet @Param = N'@kaysayOUT bigint'
Execute sp_executesql@SQLString,@Param,@kaysayOUT = @kaysay
Select @kaysay
Return
GO
SELECT H.id, H.CategoryID ,H.Image ,H.StoryId ,H.Publish, H.PublishDate, H.Date ,H.Deleted ,SL.ListTitle,C.CategoryTitle
FROM HomePageImage H
JOIN shortlist SL on H.StoryId = SL.id
(INNER JOIN category C on H.CategoryId = C.CategoryId)
order by date DESC
Hello,
I am trying to query with my stored procedure. I am getting comma separated list as input parameter (which is VARCHAR) .
The table column, which I have to compare with input parameter value , is in INTEGER datatype.
So when , I compare Like as follows:-
" AND TABLE1.EMPID IN (@INPUTPARAMETERLIST)"
I am getting error. "Syntax error converting the varchar value '34,343' to a column of data type int."
Could anybody help me , to solve this ?
Thanks !
Nicol
I have a textbox and a checkbox on a form and I'd like to add both values to a db. The textbox value gets inserted fine but I'm having trouble with the checkbox. Any ideas would be greatly appreciated.
Thanks
Form1 is the column in my db.
SqlCommand myCmd = new SqlCommand();
myCmd.Parameters.Add("@ClientCode",SqlDbType.VarChar).Value = TextBox2.Text;
myCmd.CommandText = "UPDATE table SET Form1 = 'Yes' WHERE ClientCode = @ClientCode";
sqlConnection1.Open();
myCmd.Connection = sqlConnection1;
if( CheckBox1.Checked == true)
{
myCmd.ExecuteNonQuery();
}
sqlConnection1.Close();
Hi,
Beside working right from the server how else someone can perform the SQL admistration job, I guess my question is how do most SQL DBA perform their administration without going to the server directly. Anyone --- can help please??
Thanks in advance.
Declare @StartDate datetime
Declare @EndDate Datetime
Set @StartDate = dateadd(day, datediff(day, 0, getdate()), 0)
Set @EndDate = getdate()
The job runs at 11:30 pm so I want the start date to be the same but the time to be equal to 00:00:00.0 When I run the getdate does it also return a time stamp?
The Yak Village Idiot
I had a problem where some users were experiencing timeouts when trying to add a single record to a table with 2.3 million records.
It's not a very wide table; only 10 columns and the biggest column in varchar 500. The rest are guid, datetime, tinyint...
There is also an old VB app that inserts about 3000 records a day into this table during office hours while users occasionally try and insert a record into this table.
Something said to me that the problem could be indexes but I wasn't quite sure because I though indexes only have an impact on select, delete & update. And not particulary on insert. But I checked it out anyway and noticed that the 3 indexes (1 column PK, 1 column Clustered & 1 column non-clustered) weren't padded. So I changed that (Fill Factor 95) and the problem has gone away. But why? I thought the insert would just have appended it to the end of the index before I made this change? Why would that time out?
I have the following queries. The first returns the 'Unknown' row, the second works the way I would expect. Are my expectations wrong? Can someone describe for me what is going on?
Thanks
Code Snippet
select *
FROM
SynonymComFinancialCategory b
LEFT JOIN TT_FinancialCategory a
ON
a.FinanceGroup = b.FinanceGroup
AND a.FinanceCode = b.FinanceCode
AND a.Finance = b.Finance
AND b.Finance <> 'Unknown'
WHERE
a.FinanceGroup IS NULL
AND a.FinanceCode IS NULL
AND a.Finance IS NULL
Code Snippet
select *
FROM
SynonymComFinancialCategory b
LEFT JOIN TT_FinancialCategory a
ON
a.FinanceGroup = b.FinanceGroup
AND a.FinanceCode = b.FinanceCode
AND a.Finance = b.Finance
WHERE
a.FinanceGroup IS NULL
AND a.FinanceCode IS NULL
AND a.Finance IS NULL
AND b.Finance <> 'Unknown'
Hi,I have the following table with some sample values, I want to return the first non null value in that order. COALESCE does not seem to work for me, it does not return the 3rd record. I need to include this in my select statement. Any urgent help please.Mobile Business PrivateNULL 345 NULL4646 65464 65765NULL 564654654 564 6546I want the following as my results:Number3454646564654654Select COALESCE(Mobile,Business,Private) as Number from Table returns:3454646654654 (this is a test to see if private returns & it did with is not null but then how do i include in my select statement to show any one of the 3 fields)select mobile,business,private where private is not null returns:657655646546thanks
View 1 Replies View RelatedHello,I created a formview in a web page. The data are in a sql server express database.With this form, I can to create a new data, I delete it but I can't to modify the data.The app_data folder is ready to write data; the datakeynames element in formview web control declared. I replace the automated query created by VS 2005 by a strored procedure to see if the problem solved.The problem is the same with an update query or a update stored procedure...Have you an idea, please.Than you for your help.Regards.
View 1 Replies View RelatedIm working with a detailsview and when I try to edit something and then update, the changes are not saved.
I have 2 tables ("[etpi.admin].Ocorrencias" and "[etpi.admin].SMS") that store the data that Im trying to change. Since Im having problems with the name of tables, Im coding it manually, using SQL server management studio and VWD.
I believe my code can be wrong (Im new to vwd and C# world), so here it is:
UpdateCommand="UPDATE [etpi.admin].Ocorrencias SET [Status_Ocor] = @Status_Ocor, [Percentual] = @Percentual, [IDPriori] = @IDPriori, [Abertura] = @Abertura, [IDTecRes] = @IDTecRes, [Area] = @Area, [CodEquip] = @CodEquip, [Descricao] = @Descricao, [Destinatario] = @Destinatario, [Data_Implanta] = @Data_Implanta WHERE [etpi.admin].Ocorrencias.IDOcorre = @IDOcorre
UPDATE [etpi.admin].SMS SET [idSMS] = @idSMSWHERE [etpi.admin].SMS.IDOcorre = @IDOcorre">
<UpdateParameters><asp:Parameter Name="idSMS" Type="Int32" /><asp:Parameter Name="Status_Ocor" Type="String" /><asp:Parameter Name="Percentual" Type="Int32" /><asp:Parameter Name="IDPriori" Type="Int32" /><asp:Parameter Name="Abertura" Type="DateTime" /><asp:Parameter Name="IDTecRes" Type="Int32" /><asp:Parameter Name="Area" Type="String" /><asp:Parameter Name="CodEquip" Type="Int32" /><asp:Parameter Name="Descricao" Type="String" /><asp:Parameter Name="Destinatario" Type="String" /><asp:Parameter Name="Data_Implanta" Type="DateTime" /><asp:Parameter Name="IDOcorre" Type="Int32" /></UpdateParameters>
Thx.
My rollback does not work
In my SP I want any of cmdS,cmdS2,cmdS3,cmdS4 produces error Rollback must be executed for all of cmdS,cmdS2,cmdS3,cmdS4 . I tested for error producing situation but no rollbak occured.
How can I solve this problem. Thanks.
Below is my SP .
..........
..........
..........
begin transaction
..........
..........If Len(ltrim(rtrim(@cmdS)))>0
execute(@cmdS)
If Len(ltrim(rtrim(@cmdS2)))>0
execute(@cmdS2) If Len(ltrim(rtrim(@cmdS3)))>0
execute(@cmdS3)
If Len(ltrim(rtrim(@cmdS4)))>0
execute(@cmdS4)
If Len(ltrim(rtrim(@cmdS)))>0 or Len(ltrim(rtrim(@cmdS2)))>0 or Len(ltrim(rtrim(@cmdS3)))>0 or Len(ltrim(rtrim(@cmdS4)))>0
Beginif @@ERROR <>0
begin
rollback transaction
set @Hata = 'Error !'
end
Else
Beginset @Hata = 'Sucessfully executed :)' End
End
commit transaction
RETURN
I can test it in query builder but when i preview the page and go to do the search i get nothing
Here is my statement
SELECT Employees.Last_Name, Employees.First_Name, Job_Transaction.Name, Seq_Descript.Seq_DescriptionFROM Call_List INNER JOIN Call_Group ON Call_List.Group_ID = Call_Group.Group_ID AND Call_List.Group_ID = Call_Group.Group_ID INNER JOIN Employees ON Call_List.Clock = Employees.Clock INNER JOIN Job_Transaction ON Call_Group.Group_ID = Job_Transaction.Group_ID INNER JOIN Seq_Descript ON Call_List.Sequence = Seq_Descript.SequenceWHERE (Call_List.Clock = @Clock)
Mike
Hi all.I have used a SqlDataSource in my page with this delete command:DELETE FROM tblPersonnel WHERE (ID = @original_ID)and the "OldValueParameterFormatSring" property of the datasource is "original_{0}".and i also have a GridView and a button for delete in rows.(it's CommandName is "Delete"). But when i try to delete a record, the record does not get deleted and this button only makes a PostBack on the page! Why doesn't it work?
Thanks in advance.
hi all, i have created a gridview with the select,delete and insert commands working properly. but the update command does not work. when i edit a column and click the update button, it generates no errors but does not save the changes. it just brings back the original values. i dont know wats missing. can anyone help me?
this is part of my code:UpdateCommand="UPDATE [test101] SET Surname=@Surname, Names=@Names,Registration=@Registration,[Course code]=@Course_code,Grade=@Grade WHERE ID=@ID1 "<UpdateParameters> <asp:Parameter Name="Surname" Type=String /> <asp:Parameter Name="Names" Type=String /> <asp:Parameter Name="Registration" Type=String /> <asp:Parameter Name="Course_code" Type=String /> <asp:Parameter Name="Grade" Type=Int32 /> <asp:Parameter Name="ID1" Type=Int32 /> </UpdateParameters>
Hi,I am having trouble with a WHERE clause:WHERE (([A] = @A) AND ([B] >= @B) AND (([C] < [D])) OR ([C] = 0 AND [D] = 0)) It's meant to only select data where A = @A, and B is more than or equal to @B, and one of the next two are true: C is less than D or C and D are both 0 Thanks,Jon
View 3 Replies View RelatedI am trying to get the id of last entered record and I used select ID command but it doesn't give me the ID of last record enteredProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.Click
Dim name, address, nice As String
Dim sConnString, sSQL, sID As String
Dim u As MembershipUsername = Me.name.Textaddress = Me.address.Text
u = Membership.GetUser(User.Identity.Name)
nice = u.ToString()sSQL = "INSERT into test ([Address],[Name], [username]) values ('" & _
address & "', '" & _name & "', '" & _
nice & "'); SELECT ID FROM test WHERE (ID = SCOPE_IDENTITY())"
MsgBox(sID)
MsgBox(sSQL)
sConnString = ConfigurationManager.ConnectionStrings("aspnetdbConnectionString1").ConnectionString.ToString()Using MyConnection As New System.Data.SqlClient.SqlConnection(sConnString)Dim MyCmd As New System.Data.SqlClient.SqlCommand(sSQL, MyConnection)
MyConnection.Open()
MyCmd.ExecuteNonQuery()
MyConnection.Close()
End UsingResponse.Redirect("transferred.aspx?value=2")
End Sub
End Class
I am using the below WHERE clause and it will not filter out records where Companies.CompanyEmail = b@c.com
WHERE (Companies.CompanyEmail <> 'a@a.com') this does not work, is the @ causing a problem? also tried 'a@a.com%' with no success.
WHERE (tblCompanies.C_CompanyEmail <> 'none') this works fine.
Thank you
For the life of me, I cant get this thing to work.. any insight would be greatly appreciated. What I'm trying to do is simply get the RealName field from my aspnetdb.Here the code. SqlConnection conn = new SqlConnection("Data Source=(local);Initial Catalog=aspnetdb;Integrated Security=SSPI"); SqlDataAdapter a = new SqlDataAdapter ("select RealName from dbo.aspnet_Users where UserName='Dude';", conn); DataSet s = new DataSet(); a.Fill(s); foreach (DataRow dr in s.Tables[0].Rows) { getusersrealname.Text = (dr[0].ToString());
View 4 Replies View Relatedcan anyone explain why, when i do a group by clause on the following data....it has no effect?
Part SubPart Qty
120887 66743 83
120887 66743 100
120887 667443 25
553212 122987 119
553212 122987 67
here's my select statement:
select part, subpart sum(qty) from partdata group by part,subpart,qty
the resulting data looks identical to the original.
what i was expecting was a return of just two lines:
Part SubPart Qty
120887 66743 208
553212 122987 186