BCP -- Formatting Output

Jun 13, 2007

Hi,

I wrote the below code and procedure that exports two tables contents into 2 separate Excel files. Is there a way to export contents of two tables via BCP utility into 1 Excel file but 2 different Worksheets of this file?

DECLARE @FileName varchar(50),
@FileName1 varchar(50),
@bcpCommand varchar(2000)
SET @FileName = 'E:GPPD_db_stats.XLS'
SET @FileName1 = 'E:GPPD_file_stats.XLS'
print @FileName
SET @bcpCommand = 'bcp "master.dbo.spdbdesc" OUT ' + @FileName + ' -Samex-srv-gppdb -T -c'
print @bcpCommand
EXEC master..xp_cmdshell @bcpCommand

SET @bcpCommand = 'bcp "master.dbo.spfiledesc" OUT ' + @FileName1 + ' -Samex-srv-gppdb -T -c'
print @bcpCommand
EXEC master..xp_cmdshell @bcpCommand
exec master.dbo.xp_stopmail
set @bcpCommand = ' ' + @FileName + '; ' + @FileName1 + ''
DECLARE @body VARCHAR(1024)
SET @body = 'Please find enclosed files with the database status reports as of '+
CONVERT(VARCHAR, GETDATE()) + '. Please DO NOT respond to this email or the ones coming in the future ' +
'with data files as this email address is not monitored for incoming emails. However, if you have any ' +
'questions/concerns please contact ....'


EXEC master..xp_sendmail
@recipients='alla.levit@amex.com',
@message = @body,
@subject = 'Database Weekly Statistics Report',
@attachments = @bcpCommand

Thanks in advance!
-Alla

View 1 Replies


ADVERTISEMENT

Formatting Output

Oct 7, 2004

Hi, I am running a script which inserts certain rows into a table and at the end of the execution, I do a select statement to show the inserted data as output in the results pane and it is showing as truncated...How can I show the full results..
Here is my script to show the results.
----------
SET NOCOUNT ON
DECLARE @errorCount INT
SELECT @errorCount = COUNT(*) FROM error_report WHERE id != - 2 ANDid != - 5
IF @errorCount = 0
BEGIN
INSERT INTO error_report VALUES( '' , - 1 , 'No error found.' )
END
INSERT INTO error_report VALUES( '' , - 2 , 'The Report was generated on ' + CAST(CONVERT(VARCHAR(23), GETDATE(), 1) AS VARCHAR) )
GO
SELECT table_name + ' table has bad data at id = ' + CAST(CONVERT(VARCHAR(23), id) AS VARCHAR) + ' (' + CAST(reason AS VARCHAR) + ')'FROM error_report WHERE id > 0
SELECT table_name + ' table has bad data (' + CAST(reason AS VARCHAR) + ')' FROM error_report WHERE id = 0
SELECT reason FROM error_report WHERE id = - 1
SELECT ''
SELECT reason FROM error_report WHERE id = - 2
SET NOCOUNT OFF
GO
-------------------------
The Results in the bottom pane looks like this below
------------------
NODETABLE table has bad data (There are 2 duplicate subclass)
Propertytable table has bad data (at Parentid = 2000000859 and p)
Propertytable table has bad data (at Parentid = 10122 and proper)
-------------------
But, when I do a select, they are like this below
----

NODETABLE0There are 2 duplicate subclass name: Specification
Propertytable0at Parentid = 2000000859 and propertyid = 721
Propertytable0at Parentid = 10122 and propertyid = 9

View 5 Replies View Related

Formatting SQL Email Output

Feb 18, 2005

Hi,

i am using xp_sendmail to notify system users when certain actions happen in the database but cannot control the format of the output. I am building a string for the message in the a trigger and then use
exec xp_sendmail @recipients='email address', @Subject='subject',@message=@msg

however in the @msg variable it would make a lot more sense if i could include linebreaks.

I have tried using html tags and setting the outlook installation on the server to send in html format but that doesnt work, the html tags are output as text in the message.

i have tried putting CHAR(13) in the @msg variable as i build it up but that doesnt work either.

does anyone have any ideas please?

View 2 Replies View Related

Export To Excel - Formatting Number Output

Aug 17, 2006

Hi all,

Once again, SSIS is giving me a 'F.U.N.' time (ask for definition of the F.U.N. acronym another time ).

I
have a relatively simple task - create an excel spreadsheet with 3
columns of data - Id, Description and Sales. ID and Description are
text, sales is int.

So my SP aggregates and creates my resultset
in my OLE DB Source in the Data Flow. It proceeds to the Excel
destination, and that all seems fine. My issue is that the data is
being written as text. Looking at the excel destination in Advanced
editor:
the Excel Destination Input, Input columns are formatted as
I expected: DT_WSTR 8 for the ID, DT_WSTR 100 for the Description and
DT_I4 for the Sales.
Excel Destination Input, External columns refuse to fall in line, though. They are all listed as DT_WSTR 255.

The
target excel spreadsheet is being created from a template file. That
template file has header columns. The target column for the Sales has
the entire column formatted to NUMBER (0 decimals). Yet to now avail.

When
I check the spreadsheet, the column has retained the cell formatting,
and I have a 'I' pop-up to inform me that 'someone' has inserted text
data into the number column (even though the data IS number).

Since
the SP spits out INT, it isn't a case of receiving a text value, imho.
While trying to change the external column data type in the advanced
editor, SSIS is quite happy to let me change the value for the Sales
output to DT_I4, apply, and ok. Then, when I open it immedaitely
aftgerwards, it has reverted to the DT_WSTR's! AArrgh. If is can't
handle it, at least tell me when I try and change it. don't let me
change it, and then revert back without telling me! Grumble grumble...

So - anyone know a way around this?

View 6 Replies View Related

SQL Server 2012 :: Formatting XML Output - Avoid Normalizing Structure On Client

May 28, 2015

I have a script that resolve's data into xml like this, ex:

<root>
<title>A</title>
<id>1</id>
<nodes>
<node>
<id>2</id>
<title>A.1</title>
</node>
</nodes>
</root>

And works perfectly, but ... how to make sure every item has an element "nodes" ? The case here is for the child leafs obviously. This, because on the client i have to inject this element "nodes" on a json version of this xml, and just wanted to avoid normalizing the structure on the client.

For the root I am using

FOR XML PATH('root'),TYPE; and for the hierarchy that follows
FOR XML RAW ('node'), root('nodes'), ELEMENTS

View 0 Replies View Related

Number Of ROWS Of Output Of Aggregate Transformation Sometimes Doesn't Match The Output From T-SQL Query

Dec 25, 2006

While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.

For example,the output of the Aggregate Transformation may be 960216 ,but the

'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.

I'm sure the Group By of the Aggregate Transformation is right!



But ,when I set the "keyscale" property of the transformation,the results match!

In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.

Thanks for your advice.

View 2 Replies View Related

Transact SQL :: Generic Store Procedure Call Without Output Parameters But Catching Output

Sep 21, 2015

Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])

EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]

I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working

DECLARE @myFinalVarFilledWithCachedOutput 
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'

[code]...

View 3 Replies View Related

Output And Error Output Write The Same Table At The Same Time, Stall The Process.

Aug 30, 2006

Hi

I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....

The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.

What can I do to avoid such situation?

Thanks in advance,

JD

View 4 Replies View Related

Using Output From A Stored Procedure As An Output Column In The OLE DB Command Transformation

Dec 8, 2006

I am working on an OLAP modeled database.

I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).

I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.

The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.

What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?

I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.

Thanks in advance for any assistance you can provide.

View 9 Replies View Related

Query Produces Jumbled Output / Output Not In Sequence

Jul 23, 2005

Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn

View 5 Replies View Related

PrimeOutput : Difference Between 'Output' And 'output Buffer'

Aug 12, 2005

When overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.

View 5 Replies View Related

Formatting

Aug 18, 2005

Hello all,I have a strange problem that i need some advice on. I have the following field called FILENO. It is a SQL 2000 field with the Data Type set to Char (7). The following sql statement works perfectly:SELECT TOP 1 RTRIM(FILENO) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCIt returns the correct data, 0050. Now, what i'm trying to do is add 1 to the value so i can get the next available number which is 0051. But, when i run the following sql statement, i get 51 instead of 0051.SELECT TOP 1 RTRIM(FILENO+1) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCDoes anyone have an idea how to solve this? Thanks.Richard M.

View 1 Replies View Related

SQL Formatting.

Feb 28, 2001

I'm working as a consultant for a project and I have been having constant issues with the in house "database guru" about stored procedure formating.

He insists I use a format similar to this:

create procedure getUser @UserId int = NULL
as
select
UserName
, UserPassword
, UserRole
from
Users
join
UserRole
on
User.ID = UserRole.ID
where
User.ID = @UserID
and
User.Active = 1

where as I prefer this format:

create procedure getUser
(
@UserId int = NULL
)
as
select UserName,
UserPassword,
UserRole
from Users
join UserRole on User.ID = UserRole.ID
where User.ID = @UserID
and User.Active = 1

Now normally I don't argue about style issues but I find his format confusing and it bothers me that it senselesly wastes lines make the stored procedure longer than necessary.

I'd love to get some comments on this issue or reference to any discussions on issues such as this.

Thanks

View 2 Replies View Related

SQL Formatting

Apr 9, 2008

Hello -
Does anyone know why SQL Server Reporting Services formatts SQL weird? -- If I type a SQL statement in notepad or notepad++ and then paste it in Reporting Services it will change the whole structure and "expand" it out to three or four times its size.
Thanks
Adam

View 3 Replies View Related

Formatting In Sql Query

Dec 12, 2006

Hello All,
Is it possible to format an integer to a float value with 2 decimals in an sql query.
If yes, Please help?

View 2 Replies View Related

SQL Formatting A SUM As Currency

Jan 24, 2007

I need to show my SUM of the 2 columns added in the query below formatted as currency. Is this possible?
SELECT SUM(QVSTDN + QVNONC) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
 I tried:
SELECT CONVERT(varchar(12), SUM(QVSTDN + QVNONC) , 1) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
But this does not format it as currency. Any input would be helpful.

View 6 Replies View Related

Formatting Dates

Apr 25, 2007

I imported data from a text file, where dates are currently in the format:   050729 to represent July 29, 2005.
 How could I write a sql statment to put make this show up as 07/29/05?
 
Thanks

View 5 Replies View Related

Text Formatting In SQL

Jan 31, 2008

I am trying to output data from SQL Server to an email body message with a little formatting (just to make it legible)
Using this SQL statement:
select top 1 'Name', app_first_name+' '+app_last_name [name] ,'Submission Date', submission_date ,'Address', app_address+', '+app_city+', '+app_state+'  '+app_zip from vw_bpa_export where app_email = dave@email.com order by submission_date desc
the resulting output displays this in the email body
"Name","Brian Vogler","Submission Date","2008-01-30 07:45:00","Address","6285 Harrow Trace, Norcross, GA  30092     "
but what I want is the text to look more like this:
Name                        Brian VoglerSubmission Date        2008-01-30 07:45:00Address                     6285 Harrow Trace, Norcross, GA  30092
 Is there a way to do this in the SQL  statement  (without HTML tags)?
 

View 3 Replies View Related

Formatting A Filter

Jun 9, 2008

In a SQLDataSource, the following line throws an error as an undefined function. FilterExpression='left$(lname,1) = "D"'
 Isn't this a standard VB function and why does it produce an error. How do I fix?
Thanks

View 2 Replies View Related

Formatting Dates

Dec 13, 2000

Hi,

In MS Access I can do the following:
Format([SW_Dttm],"Short Date")

What is the equivalent in SQL Server?

Thanks,

Bill

View 1 Replies View Related

Formatting Values

Jun 19, 2000

I have values in my database that I'd like to display as $xxx,xxx.xx. Some of these values use the money datatype and others use float.

I'm building a string in a stored procedure that is eventually passed to Visual Basic. I want to format these values in the above format in the string that is passed. I've searched all through MSN and I couldn't find anything related to VB's FORMAT function in SQL Server.

Does Transact-SQL have any functions that could format these values for me?

View 1 Replies View Related

Data Formatting

Mar 13, 2001

Does anyone familiar with a tool or a quick way to put apostrophes and commas around some values, so they could be used in a query ? Example, if I have a bunch of zip codes such as:
10001
10003
10009
54321
89043
etc
Let's say I have a couple of hundreds of them. I need to be able to see them as -

'10001','10003','10009','54321','89043' etc

Appreciate very much your time.

Ivan

View 3 Replies View Related

SQL 6.5 Query Formatting Help

Feb 1, 1999

I am trying to run a query for the company that I work for and I am getting the right data but more than needed. the query is like this

select distinct(companyname),max(calldate) from tablename

what I want to see is the latest call made to a customer for each company
but what I get back is the company listed several times with the dates of each call. I only want the latest. Any help?

View 1 Replies View Related

Formatting Data Help!!

Apr 12, 1999

Hello Everyone,

I have been requested to take a number of columns and concatenate them into one column with a specifc format/layout. For example I need to take this, (noting all columns are of different datatypes:

col_1 col_2 col_3 col_4 col_5 col_6 col_7
PK #1 John Doe 123 Elm Street Anywhere NM 55660
#2
#3
etc..

...and create this on a different table (noting col_2 is of datatype "text":
col_1 col_2
PK #1 John Doe
123 Elm Street
Anywhere NM 55660
#2
#3
etc..

Can this type of formatting be done?
I know how to concatenate data and use the convert function, but how do you add in CR-LF to get the proper formatting??

Any help would be greatly appreciated.
Troy

View 1 Replies View Related

Xp_sendmail - Formatting

Jun 12, 2001

Requirement:
On Insert, Trigger xp_sendmail to complete pre-formatted email with specific content and send to given email address.

Question:
What tools/methods are available to develop a template that SQL Mail's (SQL Server) xp_sendmail function can utilise without resorting to attachments.

e.g. - how do Amazon.com format and send their automated shipping confirmaion emails ??

View 1 Replies View Related

Date Formatting

Oct 10, 2001

I'm currently getting a date in this format 2001-10-08 10:35:45
(yyyy-mm-dd hh:mm:ss) how would I convert the date to this format
2001-10-08/10:35:45 (yyyy-mm-dd/hh:mm:ss)? The only thing added was the / between the date and time.

Thanks in advance,

Ed

View 2 Replies View Related

Date Formatting

Aug 6, 2004

Hi,

I need to know how i can format the date so that the query results will come out as the format mm/dd/yy hh:mm:ss?

Thanks alot.

View 1 Replies View Related

Getting Formatting Into Data

Sep 8, 2006

I am new to php/MySQL and am working on an online manual. The data is divided into Title and Content. The title is easy as it is one line but the content is meant to be in a number of paragraphs.

The Content field is currently set as "blob" and the text comes out as just one paragraph. Wha can I do to get paragraphs etc into the text?

Thanks.

View 1 Replies View Related

Formatting Numbers

Jan 18, 2005

I am using a MS Access ADP connected to SQL Server Data

In a view I have the following formula:

dbo.tblQuoteItem.Cost + dbo.tblQuoteItem.Markup * dbo.tblQuoteItem.Cost * .01

this calculates cost + markup

I cannot get it to format in Currency

Ex:

Cost is $1.75
Markup is 2.00 (2%)
Total shows - 1.785000

I want $1.78

Also - I am using this formula to calculate the Quoted price for the Qty Entered

dbo.tblQuoteItem.Qty * dbo.tblQuoteItem.Cost + dbo.tblQuoteItem.Markup * dbo.tblQuoteItem.Cost * .01

Using a Qty of 2 for above, I get 3.535000

I want $3.53


Any help is appreciated - AB

View 2 Replies View Related

Formatting Dates

Jan 20, 2004

Hi, I was wondering if there is a way to output a special format for dates in SELECT statements. Currently, my date field is returning my date in this format:
2004-01-19 00:00:00.000
but I want it to be like this:
1/19/04 or 1/19/2004
Is there a way to do this?
Thanks.

View 9 Replies View Related

Formatting Question

Mar 13, 2004

I have an old DB2 app that has date values in 4 fields (i.e. Date1_MO, Date1_DA, Date1_CN, Date1_YR). I have several MSAccess queries that I convert this to a date by doing the following:

CDate(Date1_MO & "/" & Date1_DA & "/" & Date1_CN & Format(Date1_YR,"00"))

Piece of cake....however I am struggling with this in MSSQL.

Mostly I am fighting formatting the Year. As you can see, If I were to concatinate the above values i would come up with something like 3/9/204 for a date of March 9, 2004. (Each field is a numeric value).

I have gotten this far....

select CAST(Date1_MO as varchar(2))+ '/' + CAST(Date1_DA as varchar(2))
+ '/' + CAST(Date1_CN as varchar(2))+ CAST(Date1_YR as varchar(2)) as Date1
From tPrices

I still need to convert the whole string to a date, but more importantly, I cannot figure out how to get the last element (Year) to format as '04' instead of '4'. I can't concatinate a 0 in front of it for obvious reasons. (Athough I was tempted, just joking)

I looked through a lot of the T-SQL docs but have come up dry.

Anyway HELP!!!!!!

View 2 Replies View Related

Osql Formatting

May 5, 2004

At first I'd like to justify myself - I'm rather a greenhorn in MS SQL ;-)
What I'd like to do is to create a very simple spool file from my database.
I'd like to do this using OSQL tool and it's very important for me to have the spool file in the same format as it was earlier when I used Oracle and simple spool command.
And it's almost the same, but white spaces...
There's always one white space at the begining of each line and at least one at the and of each line.
I've been trying many OSQL switches and ltrim(..) / rtrim(..) functions but the problem still exists...
The spool file is rather big - around 300MB so it's not good idea to use SED (for example) to remove white spaces.
So my question:
IS IT POSSIBLE TO REMOVE WHITE SPACES COMPLETELY USING OSQL SPOOL?

Thanks in advance for any help.

View 9 Replies View Related

Conditional Formatting

Apr 2, 2008

hey there I have a series of finacial reports. the girls that work on them want color and the boss wants them to print in black and white. the color back grounds print grayscale so I would like to add a link of some sort that changed the background to transparent when they want to print a report.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved