BCP Stored Procedure From Query Analyzer..HOW??

Apr 17, 2001

I am trying to see if there is anyway to BCP a stored procedure from SQL query analyzer. The statement works fine from the command prompt or from within DTS but not from SQL QA.

The bcp statement is as follows:
master..xp_cmdshell "bcp "exec pubs.dbo.sp_employee" queryout dev01e$emp.txt /c /o dev01e$emp.out /T /SDEV01"

sp_employee has the script:
SELECT * FROM EMPLOYEE

Any help is appreciated. Thanks.
AJ

View 2 Replies


ADVERTISEMENT

Stored Procedure In Query Analyzer Vs Linked Procedure In MS Access

Jan 12, 2007

For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.

ddave

View 2 Replies View Related

Stored Procedure That Will Only Run In Query Analyzer.

Jul 28, 2004

Hi all,

I have a problem with a stored procedure that executes properly when running it in Query Analyzer. When I call the SP from an ASP.NET application, it doesn't seem to run properly. I have verified that the parameter values are correct, but there is one update command that does not update any rows when it executes although it should. I tried stepping through the SP from within Visual Studio and it still does not work properly even though all parameters have the correct values.

Why would a SP execute properly when used in QA but not when an application executes it?

View 4 Replies View Related

How To Execute A Stored Procedure From Query Analyzer

Jun 3, 2007

I am trying to execute a stored procedure in Query anaylzer for SQL server 2005. I am not sure I am doing it correctly though, because I am getting an error message. Here is the command I am typing:
execute DetaHistoryGet(84,885,34,"EndDate")
Here is the error message I get:
Msg 102,Level 15, State 1, Line 1
Incorrect syntax near '84'
 
Here are a few lines from the stored procedure. I have not included it all here.
CREATE PROCEDURE [dbo].[DetaHistoryGet]
 (  @MarketId decimal,  @OwnerId decimal,  @QuarterId decimal,  @SortExp nvarchar(50) )
AS SET NOCOUNT ON 

View 3 Replies View Related

Return Val Of Stored Procedure In Query Analyzer

Jul 20, 2005

hi ng,i am newbie to sqlserver and my problem seems simple, but i didn't findinformation about it:How can i display theRETURN @xvalue of a stored procedure in the sql analyzer of the sqlserver?thanks a lot,d

View 2 Replies View Related

Execution Time For Stored Procedure Vs. Query Analyzer

Feb 21, 2002

HI,
I have an interesting situation. I have created a stored procedure which has a select union query and it accepts some parameters. When I execute this procedure it takes 8 minutes. When I copy the script in stored procedure and run it directly in Query Analyzer it takes 2 1/2 minutes?? Same numbers of rows are returned either way in the result set with about 13,000.

I cannot figure this out and it is almost the same thing except that in Query Analyzer I declare the parameters variables and its values?

Any feedback would be appreciated!

Thanks in advance...

View 2 Replies View Related

Problem Using DTSRUN In Stored Procedure / Query Analyzer

Jun 13, 2007

Hi. I am having a problem using DTSRun in a stored procedure or in query analyzer.
My DTS package truncates a table and then imports data from an Excel spreadsheet into the table.
The DTS package runs fine if I run it manually on Enterprise Manager or if I use DTSRun in a command prompt.
However when I try to run the package in a stored procedure or in query analyzer as follows:
ie Exec master..xp_cmdshell 'DTSRUN /SSQL SERVER /NPackageName /Uuserid /Ppassword'

The package does not return an error but it does not actually import any data from the Excel spreadsheet. It is able to truncate the table without any problem.
I've tried all kinds of combination of using Windows user id that I know has access to the excel file instead of a sql login.
I've run Filemon on the excel file and it seems like DTS is not accessing the file when I use the stored proc or query analyzer method.

If anyone could shed any light on this I would be most grateful. Thanks.

View 4 Replies View Related

Diff. Performance In Query Analyzer Than When Using Stored Procedure

Jul 20, 2005

Hi group,I have a select statement that if run against a 1 million recorddatabase directly in query analyzer takes less than 1 second.However, if I execute the select statement in a stored procedureinstead, calling the stored proc from query analyzer, then it takes12-17 seconds.Here is what I execute in Query Analyzer when bypassing the storedprocedure:USE VerizonGODECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'SELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOHere is what I execute in Query Analyzer when calling the storedprocedure:DECLARE @phonenumber varchar(15)SELECT @phonenumber = '6317898493'EXEC Verizon.dbo.baddebt_phonelookup @phonenumberHere is the script that created the stored procedure itself:CREATE PROCEDURE dbo.baddebt_phonelookup @phonenumber varchar(15)ASSELECT Source_Identifier,BADD_Sequence_Number,Record_Type,BAID ,Social_Security_Number ,Billing_Name,Billing_Address_1,Billing_Address_2,Billing_Address_3,Billing_Address_4,Service_Connection_Date,Disconnect_Date,Date_Final_Bill,Behavior_Score,Account_Group,Diconnect_Reason,Treatment_History,Perm_Temp,Balance_Due,Regulated_Balance_Due,Toll_Balance_Due,Deregulated_Balance_Due,Directory_Balance_Due,Other_Category_BalanceFROM BadDebtWHERE (Telephone_Number = @phonenumber) OR (Telephone_Number_Redef =@phonenumber)order by Service_Connection_Date descRETURNGOUsing SQL Profiler, I also have the execution trees for each of thesetwo different ways of running the same query.Here is the Execution tree when running the whole query in theanalyzer, bypassing the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Bookmark Lookup(BOOKMARK:([Bmk1000]),OBJECT:([Verizon].[dbo].[BadDebt]))|--Sort(DISTINCT ORDER BY:([Bmk1000] ASC))|--Concatenation|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Index]),SEEK:([BadDebt].[Telephone_Number]=[@phonenumber]) ORDERED FORWARD)|--IndexSeek(OBJECT:([Verizon].[dbo].[BadDebt].[Telephone_Redef_Index]),SEEK:([BadDebt].[Telephone_Number_Redef]=[@phonenumber]) ORDEREDFORWARD)--------------------------------------Finally, here is the execution tree when calling the stored procedure:--------------------------------------Sort(ORDER BY:([BadDebt].[Service_Connection_Date] DESC))|--Filter(WHERE:([BadDebt].[Telephone_Number]=[@phonenumber] OR[BadDebt].[Telephone_Number_Redef]=[@phonenumber]))|--Compute Scalar(DEFINE:([BadDebt].[Telephone_Number_Redef]=substring(Convert([BadDebt].[Telephone_Number]),1, 10)))|--Table Scan(OBJECT:([Verizon].[dbo].[BadDebt]))--------------------------------------Thanks for any help on my path to optimizing this query for ourproduction environment.Regards,Warren WrightScorex Development Team

View 5 Replies View Related

Cursor Works In Query Analyzer But Not In Stored Procedure

Mar 7, 2008



Hi i have a script works in sql query analyzer;


declare @id decimal


declare mycur CURSOR SCROLL for select myRowID from myTable order by myRowID
open mycur;

Fetch ABSOLUTE 30 from mycur into @id
close mycur;
deallocate mycur;

select @id
this script turns me a value.

i create a stored procedure from above script and its syntax is ok;
CREATE PROCEDURE SELECT_MyRow
AS
declare @cur cursor
declare @RowID decimal
set @cur = CURSOR SCROLL
for select myRowID from myTable order by myRowID
open @cur
Fetch ABSOLUTE 30 from @cur into @RowID
close @cur
deallocate @cur
select @RowID
GO

my c# code using stored procedure is below;






Code Snippet
try
{

OleDbCommand cmd = new OleDbCommand("SELECT_MyRow", myconnection);
cmd.CommandType = CommandType.StoredProcedure;
myconnection.Open();
OleDbDataReader reader = cmd.ExecuteReader();
MessageBox.Show(reader.GetName(0));//here fails
while (reader.Read())
{

MessageBox.Show(reader.GetDecimal(0).ToString());
}
reader.Close();
myconnection.Close();
}
catch(Exception ex)
{

MessageBox.Show(ex.Message);
}


The code above fails because reader reads no values, error message is "No data exists for the row/column"
but i know exists. Can anyone help me, what is the difference between stored procedure and script ?

View 4 Replies View Related

Query Analyzer. Align/indent Stored Procedure Script

Jul 23, 2005

Hi,Is there a way to align/indent the stored procedure script ( like VBAAdd-Ins Smart Indenter )Thanks, Eugene

View 2 Replies View Related

How To Display Return Value From Stored Procedure Output Parameter In Query Analyzer

Jul 20, 2004

I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:

CREATE PROCEDURE UserLogin
(
@Email nvarchar(100),
@Password nvarchar(50),
@UserName nvarchar(100) OUTPUT
)
AS

SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password
GO

If I run the query in Query Analyzer directly, I can display @UserName:

DECLARE @UserName as nvarchar(100)

SELECT @UserName = Name FROM Users
WHERE Email = @Email AND Password = @Password

Select @UserName

But how can I display @UserName if I call stored procedure:

exec UserLogin 'email', 'password', ''

I believed it return int, right?

Thanks in advance for help.

View 2 Replies View Related

Differentiate Between Whether Stored Procedure A Is Executed Inside Query Analyzer Or Executed Inside System Application Itself.

May 26, 2008

Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?

What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.

However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.

Looking forward for replies from expert here. Thanks in advance.

Note: Hope my explaination here clearly describe my current problems.

View 4 Replies View Related

Deleting Stored Procedures Through Query Analyzer

Oct 20, 2006

Hi All!

I know this must be a very silly question but, what is the PLSQL string I have to use to delete a stored procedure in a database? Essentially I have to remove a stored procedure that comes from a database backup every night because it belongs to a user and that user has to be recreated in the new SQL Server 2000. Simply put:

1. Production database comes into test database
2. Remove copy of stored procedure since it can not be set to dbo user because there is another copy with the same name that belongs to dbo.
3. Remove user
4. Add user (this one brings login name since the restored one didn't)
5. Have a nice day

I've got everything except removing the stored procedure so I will really appreciate the help.

Thank you all!

View 1 Replies View Related

How To Debug SQL 2005 Stored Proc With No Query Analyzer

Aug 8, 2007

Hi,
In SQL 2000, to debug a stored proc I would launch QA, right click and hit debug.
How do I accomplish this with SQL 2005. I can't see that it came with QA.
Thank you,
Steve

View 1 Replies View Related

Same Statement Executes 10 Times Faster As Raw Sql In Query Analyzer Then In A Stored Proc

Aug 15, 2007



Hi,


I apologize for the long post but I am trying to give as much information as I can about the steps I've taken to troubleshoot this.


We have a stored procedure that builds a sql statement and executes it using the Execute command. When I execute the stored procedure through query analyzer it takes close to 5 seconds to execute. When I print out the exact same statement and execute it directly in query analyzer as "raw sql", it takes 0.5 seconds - meaning it takes 10 times longer for the code to execute in the stored proc. I altered the stored proc to execute the printed sql instead of building but it still takes the full 5 seconds and there were no changes in the execution plan. This makes me confident that the issue is not caused by the dynamic sql. I've used with recompile to make sure that the stored procedure caches the most recent execution plan. When I compare the execution plans, the stored proc uses a nested loop whereas the raw sql statement uses a hash join. Seeing that, I added the hash hint to the stored proc and doing so brought down the execution time down from 5 secs to 2 secs but still the raw sql statement uses a clustered index whereas the stored proc uses a non-clustered index and that makes the statement 4 times slower. This proves how efficient clustered indexes are over non-clustered ones, but it doesn't help me since, as far as I know, I can't force SQL Server to use the clustered index.


Does anyone know why sql server is generating such an inefficient execution plan for the stored proc compared to the execution plan that it generates when executing the raw sql statement? The only thing I can think of is that some stats are not updated and that somehow throws off the stored proc. But then again, shouldn't it affect the raw sql statement?


Thank you,


Michael Tzoanos

View 4 Replies View Related

Ad Hoc Query Vs Stored Procedure Performance Vs DTS Execution Of Stored Procedure

Jan 23, 2008



Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio

What could explain this?

Obviously,

All three scenarios are executed against the same database and hit the exact same tables and indices.

Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).

The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes

View 1 Replies View Related

ASP Cannot Run Stored Proc Until The Web User Has Run The Proc In Query Analyzer

Feb 23, 2007

I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.

View 1 Replies View Related

Using A Stored Procedure To Query Other Stored Procedures And Then Return The Results

Jun 13, 2007

Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB  multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived,     I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID,    S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName',    T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID    FROM [Item].ItemDetails I    INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID    INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived,     I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID    FROM [Item].ItemDetails IOr something like that... Any thoughts? 

View 3 Replies View Related

SQL Server Admin 2014 :: Estimated Query Plan For A Stored Procedure With Multiple Query Statements

Oct 30, 2015

When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.

1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?

<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>

2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?

View 0 Replies View Related

Stored Procedure Dbo.SalesByCategory Of Northwind Database: Enter The Query String - Query Attempt Failed. How To Do It Right?

Mar 25, 2008

Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:


USE [Northwind]

GO

/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

CREATE PROCEDURE [dbo].[SalesByCategory]

@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'

AS

IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'

BEGIN

SELECT @OrdYear = '1998'

END

SELECT ProductName,

TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)

FROM [Order Details] OD, Orders O, Products P, Categories C

WHERE OD.OrderID = O.OrderID

AND OD.ProductID = P.ProductID

AND P.CategoryID = C.CategoryID

AND C.CategoryName = @CategoryName

AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear

GROUP BY ProductName

ORDER BY ProductName

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:

Imports System.Collections.Generic

Imports System.ComponentModel

Imports System.Drawing

Imports System.Text

Imports System.Windows.Forms

Imports System.Data

Imports System.Data.SqlClient

Imports System.Data.Common

Imports System.Diagnostics

Public Class ConnectionPoolingForm

Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance

Public Sub New()

' This call is required by the Windows Form Designer.

InitializeComponent()

' Add any initialization after the InitializeComponent() call.

'Force app to be available for SqlClient perf counting

Using cn As New SqlConnection()

End Using

InitializeMinSize()

InitializePerfCounters()

End Sub

Sub InitializeMinSize()

Me.MinimumSize = Me.Size

End Sub

Dim _SelectedConnection As DbConnection = Nothing

Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged

_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)

EnableOrDisableButtons(_SelectedConnection)

End Sub

Sub DisableAllButtons()

btnAdd.Enabled = False

btnOpen.Enabled = False

btnQuery.Enabled = False

btnClose.Enabled = False

btnRemove.Enabled = False

btnClearPool.Enabled = False

btnClearAllPools.Enabled = False

End Sub

Sub EnableOrDisableButtons(ByVal cn As DbConnection)

btnAdd.Enabled = True

If cn Is Nothing Then

btnOpen.Enabled = False

btnQuery.Enabled = False

btnClose.Enabled = False

btnRemove.Enabled = False

btnClearPool.Enabled = False

Else

Dim connectionState As ConnectionState = cn.State

btnOpen.Enabled = (connectionState = connectionState.Closed)

btnQuery.Enabled = (connectionState = connectionState.Open)

btnClose.Enabled = btnQuery.Enabled

btnRemove.Enabled = True

If Not (TryCast(cn, SqlConnection) Is Nothing) Then

btnClearPool.Enabled = True

End If

End If

btnClearAllPools.Enabled = True

End Sub

Sub StartWaitUI()

Me.Cursor = Cursors.WaitCursor

DisableAllButtons()

End Sub

Sub EndWaitUI()

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

End Sub

Sub SetStatus(ByVal NewStatus As String)

RefreshPerfCounters()

Me.statusStrip.Items(0).Text = NewStatus

End Sub

Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click

Dim strConn As String = txtConnectionString.Text

Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()

Try

bldr.ConnectionString = strConn

Catch ex As Exception

MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)

Return

End Try

Dim dlg As New ConnectionStringBuilderDialog()

If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then

txtConnectionString.Text = dlg.ConnectionString

SetStatus("Ready")

Else

SetStatus("Operation cancelled")

End If

End Sub

Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click

Dim blnError As Boolean = False

Dim strErrorMessage As String = ""

Dim strErrorCaption As String = "Connection attempt failed"

StartWaitUI()

Try

Dim cn As DbConnection = _ProviderFactory.CreateConnection()

cn.ConnectionString = txtConnectionString.Text

cn.Open()

lstConnections.SelectedIndex = lstConnections.Items.Add(cn)

Catch ex As Exception

blnError = True

strErrorMessage = ex.Message

End Try

EndWaitUI()

If blnError Then

SetStatus(strErrorCaption)

MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

Else

SetStatus("Connection opened succesfully")

End If

End Sub

Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click

StartWaitUI()

Try

_SelectedConnection.Open()

EnableOrDisableButtons(_SelectedConnection)

SetStatus("Connection opened succesfully")

EndWaitUI()

Catch ex As Exception

EndWaitUI()

Dim strErrorCaption As String = "Connection attempt failed"

SetStatus(strErrorCaption)

MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

End Try

End Sub

Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click

Dim queryDialog As New QueryDialog()

If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then

Me.Cursor = Cursors.WaitCursor

DisableAllButtons()

Try

Dim cmd As DbCommand = _SelectedConnection.CreateCommand()

cmd.CommandText = queryDialog.txtQuery.Text

Using rdr As DbDataReader = cmd.ExecuteReader()

If rdr.HasRows Then

Dim resultsForm As New QueryResultsForm()

resultsForm.ShowResults(cmd.CommandText, rdr)

SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))

Else

SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))

End If

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

End Using

Catch ex As Exception

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

Dim strErrorCaption As String = "Query attempt failed"

SetStatus(strErrorCaption)

MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

End Try

Else

SetStatus("Operation cancelled")

End If

End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.

Thanks in advance,
Scott Chang

View 4 Replies View Related

Stored Procedure Query Optimization - Query TimeOut Error

Nov 23, 2004

How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :

CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN


SET NOCOUNT ON

SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec

RETURN 1
END



GO

View 8 Replies View Related

Easy SQL Question. How To Display Query Results In Query Analyzer

Feb 12, 2008

When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare     @SniierId as   uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare    @SniierAlias  as nvarchar(50)declare    @AlwaysShowEditButton  as bitdeclare     @SniierName  as  nvarchar (128)/* Check access for Sniier */SELECT TOP 1       @SniierName      = Sniiers.SniierName,        @SniierAlias    = Sniiers.SniierAlias,        @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId

View 3 Replies View Related

Query Analyzer Runs The Query Instantly But ADO Can Take Forever???

Aug 29, 2001

THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.

Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"

Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)

View 3 Replies View Related

Same Query Gives Result With Different Column Sequence When Used In Query Analyzer

Feb 25, 2012

When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.

result in Excel 2003 SQL OLE DB query

col-A col-B col-C
values...

Result with Query Analyzer and VBA Macro

col-c col-B col-A
values...

View 3 Replies View Related

Re-display Result Set Without Re-running Query In Query Analyzer?

Apr 9, 2006

I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.

View 6 Replies View Related

Help: Why Excute A Stored Procedure Need To More 30 Seconds, But Direct Excute The Query Of This Procedure In Microsoft SQL Server Management Studio Under 1 Second

May 23, 2007

Hello to all,
I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted.
but i excute it with the same parameters  direct in Microsoft SQL Server Management Studio , It takes only under 1 second time
I don't know why?
Maybe can somebody help me?
thanks in million
best Regards
Pinsha 
My Procedure Codes are here:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output )
AS
BEGIN
 
if ( @Level = 1)
begin
select @Path = convert(varchar(100),IDMember)
from wtcomValidRelationships
where wtcomValidRelationships.[IDMember]= @IDMember
and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0
end
if (@Level = 2)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0
end
if (@Level = 3)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0
end
if ( @Level = 4)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0
end
if (@Level = 5)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0
end
if (@Level = 6)
begin
select top 1 @Path = '' from wtcomValidRelationships
end
END
 
 
 

View 6 Replies View Related

Determine Fastest Query In Query Analyzer

Sep 17, 2005

I am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq

View 4 Replies View Related

Query Analyzer, Slow Query Responses

Sep 25, 2006

Hi there

Running query analyzer against two different server.

the first only need 1-2 secs to return the query result,

the other return 7-8 secs for the query result.

plz advice what could cause this slow performance?



thx



View 1 Replies View Related

Stored Procedure Query

Jun 27, 2007

hey.. say i have a table with 4 columns, Id, col1, col2 & col 3the way it works is the id and one of the col's will have info, the other 2 cols will be emptyim trying to write a proc that returns the value of the column that has info + a number that is stored in a string to represent the column eg: CREATE PROCEDURE proc_Test     @Id int,      @Answer varchar(100) outputasset nocount on    select @Answer = col1 +', 1'from myTablewhere Id= @Idif @@rowcount < 1select @Answer = col2 +', 2'from myTablewhere Id= @Idif @@rowcount < 1

select @Answer = col3 +', 3'
from myTable
where Id= @IdreturnGO but for some reason, it only process's the first select statment and if nothing is in the column, it returns - ', 1' cheers!!! 

View 4 Replies View Related

Need Stored Procedure For This Query

Apr 1, 2008

 Hi,I am weak in writing stored procedure and want to learn it step by step.Now I have written a query and the requirement is such that I need to convert it in stored procedure.query:Select distinct empskill.tcatid,Coalesce(prm,0) as prm,coalesce(secn,0) as secn,a as technology,coalesce(skd,0) as skd,coalesce(knd,0) as knd,coalesce(tnd,0)as tnd,coalesce(dnd,0) as dnd from empskill RIGHT OUTER JOIN (select tcatid,Count(skilltypeid) AS prm from empskill where skilltypeid=1 group by tcatid) prms ON empskill.tcatid=prms.tcatid LEFT OUTER JOIN (select tcatid,Count(skilltypeid) AS secn from empskill where skilltypeid=2 group by  tcatid) secs on empskill.tcatid=secs.tcatid RIGHT OUTER JOIN (select technology.category as a,empskill.tcatid from empskill,technology where empskill.tcatid=technology.tcatid group by empskill.tcatid,technology.category ) s ON empskill.tcatid=s.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS skd from empskill where skilllevelid=1 group by tcatid) skds on empskill.tcatid=skds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS knd from empskill where skilllevelid=2 group by tcatid) knds on empskill.tcatid=knds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS tnd from empskill where skilllevelid=3 group by  tcatid) tnds on empskill.tcatid=tnds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS dnd from empskill where skilllevelid=4 group by tcatid) dnds on empskill.tcatid=dnds.tcatid union select top 1 500 as tcatid,'' as prm,'' as sec,'more' as technology,'' as skd,'' as knd,'' as tnd,'' as dnd from empskill Can you please explain step by step how to convert this to stored procedure.Thanks a lot 

View 3 Replies View Related

Stored Procedure In A Query

Nov 16, 1999

In access, I can create a function that I can call in a query. It runs that function iteratively. Do I have the same ability with SQL server? Can I call a stored procedure WITHIN a query? I would like to be able to do something like:

Insert into tblOrders(spFirst_Name) Select {Call spUpperLower(tblClients.First_Name)} from tblClients Where ...


So basically, spUpperLower would run on every First Name Row in the result set.

Any help would be much appreciated.


Thanks,
Brad

View 3 Replies View Related

Run A Stored Procedure From A Query?

Oct 2, 2001

I want to run a stored procedure from a query...
can I do this? Thanks!

CREATE VIEW dbo.V_EmploymentTerminationsResignations
AS
--the next 3 lines produce errors...
declare @StartDate datetime
declare @EndDate datetime
exec [hrs2].[dbo].[sp_getquarterinfo] --@StartDate OUTPUT, @EndDate OUTPUT
--they're designed to replace the hard coded stuff in the WHERE statement...

--a snippet of the originl view...
SELECT TOP 100 PERCENT dbo.Employee.OrgID, dbo.Employee.SSN, dbo.Employee.EMPLOYEE_NAME, , dbo.Employee.SPECIAL_STATUS,
WHERE ...
(dbo.Employee.LAST_PERS_ACTN_DATE BETWEEN CONVERT(DATETIME, '2001-07-01 00:00:00', 102) AND CONVERT(DATETIME, '2001-10-01 00:00:00', 102))

ORDER BY dbo.Employee.LAST_PERS_...

View 1 Replies View Related

Query To Stored Procedure

Oct 22, 2007

Hi,

I have created an SQL query which returns the expected data. However, when I try to run it as a stored procedure, I get no rows returned.

(I assume I running the procedure correctly e.g. exec getNonDeployed RCN20047)


Code:

CREATE PROCEDURE getNonDeployed
@packageID text
AS
BEGIN

DECLARE @CollectionID VARCHAR(10)
DECLARE @Collections TABLE (CollectionID VARCHAR(10))

set @CollectionID = (SELECT
CollectionID
from ProgramOffers
where OfferID='@packageID');

WITH CollectionFull (SubCollectionID) AS
(
-- Create the anchor query. This establishes the starting
-- point
SELECT
SubCollectionID
from v_CollectToSubCollect a
where a.SubCollectionID=@CollectionID
UNION ALL
-- Create the recursive query. This query will be executed
-- until it returns no more rows
select
a.SubCollectionID
from v_CollectToSubCollect a
inner join CollectionFull b on b.SubCollectionID=a.ParentCollectionID
)
Insert Into @Collections
SELECT * FROM CollectionFull

select a.RuleName AS MACHINENAME, c.IPAddress0 as IPADDRESS
from v_CollectionRuleDirect a
inner join @Collections b on b.CollectionID=a.CollectionID
inner join v_GS_DEVICE_NETWORK c on c.ResourceID=a.ResourceID
where RuleName not in (select distinct a.MachineName as MACHINENAME
from v_StatusMessage a, v_StatMsgAttributes b, v_CollectionRuleDirect c, v_GS_DEVICE_NETWORK d, v_Collection e
where (a.RecordID=b.RecordID AND a.MachineName=c.RuleName and c.ResourceID=d.ResourceID and c.CollectionID=e.CollectionID)
AND b.AttributeValue IN ('@packageID'))


END

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved