One of my production SQL Server 2000 systems is listening on TCP and Named Pipes, but not on Shared Memory.
This server has a lot of scheduled jobs that are internal to this box. I assume these jobs would benefit from using shared memory instead of TCP/IP, but I can't figure out why it doesn't use shared memory already and how to correct that.
A transport-level error has occurred when receiving results from the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.).Net SqlClient Data Provider at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByteArray(Byte[] buff, Int32 offset, Int32 len) at System.Data.SqlClient.TdsParserStateObject.ReadUInt32() at System.Data.SqlClient.TdsParser.ReadSqlValueInternal(SqlBuffer value, Byte tdsType, Int32 typeId, Int32 length, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.ReadSqlValue(SqlBuffer value, SqlMetaDataPriv md, Int32 length, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ReadColumnData() at System.Data.SqlClient.SqlDataReader.ReadColumnHeader(Int32 i) at System.Data.SqlClient.SqlDataReader.ReadColumn(Int32 i, Boolean setTimeout) at System.Data.SqlClient.SqlDataReader.GetInt32(Int32 i)
Ive just started getting this on a stable application thats used a datareader on millions of records.
Not sure where to got from here and I can't find anyone else whos getting the failure during the processing.
I could disable shared memory protocol but that seems extreme. I'm on Sql Enterprise 9.00.2047. Maybe the process is hammering the server very hard? Personally I've rarely ever seen SQL be the cause of an error, only user config, bad disks or power issues.
I'm running the app again with SQL Profiler capturing "standard" events.
Just need it to blow up again.
I can run the app on another machine of course and I wouldn't get Shared Memory Provider being used. Maybe I ought to do that as well. At least if the error is not really in the Shared Memory I'd have another avenue to explore.
I am new here and new to SQL Express. I've searched for my issue, but can 't quite find anything close to the problem or how to solve it, if it's even solvable. I am using SQL Express on a pc to connect to the back end of a database. The front end application (an access runtime) also runs on the same pc. This pc is on a domain. I think I've tried every combination of protocols, and although connectivity via ODBC is successful, the application can't connect - gives the "server doesn't exist or access denied". When I log on to this computer with the "machine" logon (not the domain), I have SQL Express configured to use shared memory, the application runs just fine. I need to use this database for testing in a non productivity environment, but I really hate to log off the domain to run it. Ideas?
Our 32-bit applications connect to SQL Server 32-bit through OLEDB with Shared memory as preferred protocol. Our client applications and SQL Server generally reside on same machine. We are evaluating possible impact when SQL Server 2008 64-bit is accessed with our 32-bit client applications running on 64bit WindowsServer 2008. Can shared memory protocol will be still used by underlying SQL server OLEDB dll considering the client application is 32-bit where as SQL Server is 64-bit ? Or it will switch to Named pipes or TCP/IP automatically ?
Apparently this error was fixed in CU12 for SQL 2008, but it seems to have raised it's head again in SQL 2012.[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I've got a client who is seeing it. but I've not seen a fix in CU1 or CU2 for 2012.
[SSIS.Pipeline] Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I'm busy rewriting DTS packages as SSIS packages. As and when I finish a package I run it in debug mode via Microsoft Visual Studio and then examine the Exection Results to see the messages generated.
Now it may or may not matter how I run the package but the following warning has been generated :-
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
When I try to install MsSQL Server 2005 Develop Edition do I get the error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the other end of the pipe.
I have trying to look at other posts on this forum and elsewhere, but cant find any solution that works for me - mainly cuz all solutions is after the installing.
Before trying to install MsSQL Server 2005 Dev did I install VS.Net 2005 Pro. First did the Native Client make troubles, but got it to work with reinstalling it, but now does the SQL setup stop on every try with the error above.
I have tried looking if the MSSQLServer is running when it tries to connect during install, and everything says it is running (Services, Net start, Taskman.).
I dont run any special setup on my system - it is a normal Windows XP Pro SP2 with all updates. I just need the SQL server installed so I can develop locally without access to out main SQL server.
I have been using MsSQL 2000 before and never had any problems, but the 2005 keep on bugging me.
The only solution I havent tried is to reinstall Windows itself, but I will pref. not to do so.
And to be honest, then have I no idea what a "pipe" is - I am used to develop webapplications and not so much on server maintaince/troubleshooting.
I am getting the following warning for my SSIS08 package: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console. I did check Warning in SSIS 2008 , but didn't find any solution. The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
When running the etl I'm getting the error: <SSIS Task>: Shared Memory Provider: Timeout error [258] ; followed by the message "Communication link failure".
What is special about this message that it happens on a SQL Execute task (random task) and the Timeout is after 2 minutes.
When executing the packages separatly it is working fine. The SQL Tasks that are failing are also quit heavy, but reasonable and takes between >2min and 10 - 15 min. Statements are stored procedures that puts an index on 3 mil. records or update statements,...
I had a look to all my (SSIS-etl) timeouts and they have the default value 0, the "remote query timeout" of the server is set to 10 minutes. According to me, these are the only one that exists?
There are 2instances on the server each instance has 24GB allocated, the server has 64 in total. Also when the etl runs (that results in an error) no other etl is running on the 2 instances. I'm working with the oledb sql server native client11.0 provider : SQLNCLI11.1.
I create 2 instances SQL Server in the same server using port 1433, unluckily when i connect they from the remote pc, it doesn't connect and alert "Invalid Instance". How can i use many instances? And what special when i replicate them?
I installed SQL 2000 Client Portion in my local computer: No server functionality. I selected my computer name as an instance name. Installation went OK.
Now, I am trying to install MSDE in my computer. Error comes in early part of installation: It says, "The instance name specified is not valid"
Can any one help - my Full text catalog on a remote shared sql server hasdied and i need to recreate it completely - I have done this before but i'velost the code to do it.If I remember right what i did was use start --> run --> to run an exe in themssql folder that connected to the remote server - but i've lost all theparameters I needed for it.ANy help much apprectiated
I am receiving the following error when starting a program called ShelbySystems that is supposed to connect to a local database. I don't think this is a security issue but I don't know much about SQL server either so...
DIAG [08001] [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. (17) DIAG [01000] [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). (2)
System Info: Windows 10 Home - upgrade from 8 64 bit SQL server 2012 Express SQL Backwards compatibility 2005 64 bit ShelbySystems software v5.4
I am including the trace log in case it is useful.
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
I clicked on the setup.exe file which is located in C:sql2ksp3MSDE directory , then the following Error message appear to me:
========================================= ---------------------------------------- Microsoft SQL Sever Desktop Engine ---------------------------------------- The instance name spacified is invalid.
=========================================
What is the solution??
FYI: I am using: MS Visual Studio.NET 2003 MS Windows XP SP1a MS SQL Server 2000
Whenever I use "User Instance=True" as in the connection string below, I get an invalid connection string error. If I take it out, the connection string generates other errors.
I’m setting up a server for development that will have one instance of SQL Server 2000 Standard Edition and one of SQL Server 2005 Standard Edition installed.
The server has a total of 3.5 GB of physical memory, so I was wondering about the best way to allocate the memory. Should I just let both instances have the default allocation and let them fight it out for memory as needed, or allocate a memory limit for each instance?
I have installed Office 2007 Beta 2 and SQL Server 2005 at my system.
I made 2 packages (C:Package.dtsx, C:Package1.dtsx). I am executing Package1 inside Package.dtsx using Executing Package Task.
In package1.dtsx there is some configuration that is coming at runtime(For each loop container having some file connections) , so I have put DelayValidation property of this package to True, but that did not work when I called this package from Package1.dtsx, then I found one workaround, I changed the ExecuteOutOfProcess of ExecutePacakge task to True,
Now the problem is that before installing Office 2007 the both were executing fine (it was taking some time in starting the second package because of OutOfProcess execution).
After installing Office 2007 I get the following error while executing the second package from first package.
Error: Error 0x800703E6 while loading package file "C:Package1.dtsx". Invalid access to memory location. .
This problem comes whenever the I execute the package having OutOfProcess property to true.
Is there any workaround for this, or I am wrong somewhere.
I am trying to set up a ODBC connection to a remote database using the ODBC data source administrator. I am getting an error message complaining of an invalid instance(). The database I am trying to connect to does have a default instance and a named instance. Do I need to specify the instance name somewhere in the connection settings? I tried specifying the server name as <Remote computer IP Address>/<Instance Name> but this didn't work. Any ideas?
One server, a part of a 2 node always on cluster, had problems, I had to restart.
I'm getting this error for example now:
Error: 49910, Severity: 10, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped. + SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes.
Now, on the instance I have activated maximum servere memory, my question; Is it possible to adjust this setting without starting the service?
Hi, I am using data flow task to load data with the source as text file to sql server table with identity column. After mapping all the columns except identity column, when I execute, the package failing saying it can not insert null value into identity column. I donno how to get around with it ???? Thnaks, V
Each month we process 100+ text files into our ERP system. Occasionaly the Voucher Date in the text file does not contain a valid date. I would like to check to see if it is a valid Date, if it isn't replace it with the current date.
I thought I would use a Derived Column transformation, but I don't know how to check a field to see if it is a valid date.
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi all--Given a table called "buyers" with the following column definitions in a SQL Server 2005 database:
[BUYER] [nvarchar](40) NULL,
[DIVISION] [nvarchar](3) NULL,
[MOD_DATE] [datetime] NULL
This table is laden with Unicode data and the MOD_DATE contains no data--not even NULL values, and is giving me a headache as a result. I can export this data fine to a text file, but when I create an SSIS package to attempt import to another table defined exactly the same as above in another place, I get the following messages:
SSIS package "buyers_import.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Information: 0x402090DE at Data Flow Task, Source - buyers_txt [1]: The total number of data rows processed for file "D: emp3uyers.txt" is 232. Error: 0xC0202009 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". Error: 0xC020901C at Data Flow Task, Destination - buyers_tst [22]: There was an error with input column "MOD_DATE" (45) on input "Destination Input" (35). The column status returned was: "The value could not be converted because of a potential loss of data.". Error: 0xC0209029 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (35)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (35)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - buyers_tst" (22) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has ended. Information: 0x402090DF at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has started. Information: 0x402090E0 at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - buyers_tst" (22)" wrote 0 rows. Task failed: Data Flow Task SSIS package "buyers_import.dtsx" finished: Failure.
Among the customizations in this package is the flag "ValidateExternalMetadata" set to False. The data itself is surrounded by " and delimited by semicolons for each field, with the header row set as the name of each column. It looks like this:
"BUYER";"DIVISION";"MOD_DATE" "108 Joon-Hyn Kim";"TAD";"" "109 Kang-Soo Do";"TAD";"" "FS07 John Smith";"TAD";""
...
Can anyone suggest a course of action on how to handle the error when the MOD_DATE field is completely empty?
I'm trying to connect to a tab-delimited text file using the ODBC data access. I set it up using Administrative Tools - Data Sources (ODBC) from the start menu, and clicked the 'Guess' button under Define Format.
It looks OK, but if I go back to Define in Administrative Tools and try to review it, I get a similar error message:
Ini File (or Registry) C:Program FilesCIMSschema.ini is corrupt. Section: cims_output_data.txt, Key: Col1.
Has anyone seen this before? There is nothing on MSDN as far as I could find. I read on another forum that if you replace the label 'Col1' with 'Col' the problem is solved but it still reports that the schema is corrupt when I try to open it in Administrative Tools.
I have an existing instance of sql express 2005 w/advanced services installed. When I installed I did not install full text search. Is there a way I can enable full text search on this existing instance?