BCP With ODBC Native Driver
Sep 18, 2007
We are using Visual Studio 2003 to develop a VC++ application to support SQL Server 2000 and 2005 through ODBC driver. I was able to successfully test the application with ODBC driver for 2000. But when it comes to the SQL Server 2005 using native ODBC driver it fails with "ODBCBCP.dll is not compatible with 'SQL Native Client' driver. Please configure 'SQL Server' driver for the DSN or connection string.
Then I tried to use the sqlncli.h inplace of odbcss.h and replaced the odbcbcp.lib with sqlncli.lib pointing to the C:Program FilesMicrosoft SQL Server90SDKLibx86 folder.
Code Snippet
#include <sql.h>
#include <sqlext.h>
#include <sqltypes.h>
#define _SQLNCLI_ODBC_
#include <sqlncli.h>
Now I can not compile the program. The errors I am getting are as follows:
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2894): error C2061: syntax error : identifier 'DB_UPARAMS'
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2901): error C2061: syntax error : identifier 'DB_UPARAMS'
etc
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2938): error C2061: syntax error : identifier 'HCHAPTER'
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2944): error C2061: syntax error : identifier 'HCHAPTER'
etc
The same code just works fine in the Visual Studio 2005, but we need the dll in Visual studio 2003.
I think I am missing pretty obvious. Your help is appreciated.
View 1 Replies
ADVERTISEMENT
Nov 16, 2006
Hi,
Our software uses native ODBC driver and Visual C++ 2003 to communicate with SQL Server 2005.
SELECT xml_schema_namespace(SCHEMA_NAME(schema_id) ,name) FROM sys.xml_schema_collections.
SQLDescribeColW returns -152 as the datatype for the column in the above select statement. However, I€™m unable to find a preprocessor definition for -152. The datatype looks like an nvarchar. Is it an nvarchar? Where can I find the definition for this datatype?
I have discovered similar problems while bringing back SQL_VARIANT types. The returned subtype of a SQLVariant comes up with -16 and -25. I cannot find definitions for these sub types either.
Any help is appreciated.
Regards,
Venkat
View 5 Replies
View Related
Aug 2, 2007
I have a SQL express database which I need to access from a shared hosting plan. I can create an ODBC connection through the hosting provider's control panel for SQL Server, but it won't connect. I tested this locally and discovered that the SQL Native Client connects fine, but the previous SQL Server driver does not. This seems to only happen with SQL 2005 Express edition; it works with the Developer Edition. Does SQL Express only use the Native SQL Client??
Thanks in advance for your help!
View 3 Replies
View Related
Aug 15, 2007
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help
View 1 Replies
View Related
Oct 28, 2004
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
View 1 Replies
View Related
Oct 13, 2004
Hello,
I want to have a comparison about operation of a power builder application with sql server database, using sybase native driver and ole db driver.
View 2 Replies
View Related
Feb 13, 2007
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?
View 4 Replies
View Related
Oct 19, 2006
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
View 17 Replies
View Related
Feb 4, 2008
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
View 1 Replies
View Related
Jun 1, 2015
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
View 9 Replies
View Related
Aug 16, 2007
We're upgrading from SQL2K to 05 next week. We want to push the SQL Native Client driver(ODBC) thru the network but IT said it can only be an msi or exe file. Is their anyway we could get this file in this format?
View 4 Replies
View Related
Oct 15, 2007
I have created a table using SQL SERVER 2005 with column datatype as varbinary and with column size as 'MAX':-
i.e:
create table tablename {
column varbinary (MAX)
}
When i try to query for Column precision using SQL Native Client ODBC Driver it returns '0' instead of 2^31-1 (which is the value for MAX), but when i use other driver it works as expected. If i assign some value like varbinary(20) then it works.
Please let me know is there any fix pack available for this. Because one of our client is facing this problem, so we have to provide solution as early as possible:
Version of SQL Native Driver : 2005.90.1399.00
Any help would be appreciated.
View 4 Replies
View Related
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
View 14 Replies
View Related
Oct 16, 2007
Hello!
I'm looking a native driver for SQL 2005 running under Linux/Unix!
Or Is accessible anywhere source code of the existing driver for php?
I tried FreeTDS, but it has some bugs and has no support.
Is there any good solution for this problem?
Thanks!
View 8 Replies
View Related
Aug 26, 2007
I installed sql2005 on server, created odbc connection , sucess connection.
I installed native client on pc. pc ping server sucessfully. I created odbc using sa with valid password (as i do in server), when completing give error " sql server does not exist or access denied" , and can not connect with server.
how can i resolve the problem.
View 1 Replies
View Related
Dec 12, 2006
We've run into an issue running against the SQL Native Client ODBC driver (version 2005.90.2047.0) on Windows 2003 Server (Itanium). The "INFO: ODBC 64-Bit API Changes in MDAC 2.7" article (http://support.microsoft.com/kb/298678) doesn't say that the returned value for SQL_ATTR_CONCURRENCY changed to a 64-bit value, but if you request this attribute from the SQL Native Client driver, a 64-bit value is returned. The ODBC spec still indicates that SQL_ATTR_CONCURRENCY is a SQLUINTEGER value, which is 32-bit, even on a 64-bit platform.
This is easy to see by using the ODBC Test utility in the Windows SDK for ia64, "C:Program FilesMicrosoft SDKBinWin64ia64odbcte32.exe". If you connect to the SQL Server driver and then simply call SQLGetStmtAttr(SQL_ATTR_CONCURRENCY), you'll see that the *StringLengthPtr argument returns 8 bytes, when it should only return 4.
Note that we've also seen the same behavior with SQL_ATTR_ROW_BIND_TYPE as well as other statement attributes defined to return SQLUINTEGER values.
Has anyone else run into this?
Thanks,
Chris
View 3 Replies
View Related
May 15, 2007
SQL Native Client 2005.90.3042.00 ODBC driver does not return SQL_CVT_DOUBLE as part of the mask from SQLGetInfo for SQL_CONVERT_WCHAR, SQL_CONVERT_WVARCHAR even though driver actually supports converting nchar and nvarchar to SQL_DOUBLE. For example,
select
{ fn convert(N'1.23', SQL_DOUBLE) }
works, but
SQLUSMALLINT nInfoType = SQL_CONVERT_WCHAR;
SQLUINTEGER nInfoValue = 0;
SQLRETURN rc = SQLGetInfo( hdbc, nInfoType, &nInfoValue, sizeof( nInfoValue ), NULL );
ASSERT( nInfoValue & SQL_CVT_DOUBLE ); // fails
View 3 Replies
View Related
Dec 2, 1999
What is the most current ODBC driver version for SQL 7.0? Also is there a link to Micrsoft's site where this can be found?
View 3 Replies
View Related
Apr 4, 2008
We now have both the 32 and 64 bit odbc driver. We installed V5R4 of client access. But SSIS doesn't seem to see the 64 bit ODBC(DSN I set up) it is only showing me the 32 bit(DSN that I set up). Is this a limitation within SSIS?
View 5 Replies
View Related
Sep 13, 2007
Hi,
When I'm using SQL server 2005, and ODBC drive €œSQL Native Client€? I get an error when executing the below given code. Error Message: €œTransaction cannot start because more than one ODBC connection is in use.€?
But this works well with SQL Server 2000 with ODBC drive "SQL Native Client" and in SQL server 2005 also when I used ODBC drive €œSQL Server€?.
I used aTrgConn.Execute(€œBegin Transaction€?) and it's working properly. But unfortunately I cannot use this method, because I want to run the same code with Oracle ODBC as well.
Is this a known issue in SQL Native client drive with SQL server 2005? Do you know a solution for this?
Please Help..............
Thanks in advance.
Code:
Dim aTrgConn As New ADODB.connection
Dim aCmdIns As New ADODB.Command
Dim aCmdUpd As New ADODB.Command
aTrgConn.Open sConnStr
Set aCmdIns.ActiveConnection = aTrgConn
Set aCmdUpd.ActiveConnection = aTrgConn
aTrgConn.BeginTrans
View 6 Replies
View Related
Sep 21, 1999
does anyone know where i can find an ODBC sql7.0 vers. 3.70.06.23 installation routine?
View 1 Replies
View Related
Feb 15, 2004
Hi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
View 2 Replies
View Related
Feb 8, 2005
Hello,
I would be grateful if you could show me where I can download SYbase ASE ODBC Driver. I have searched almost the whole WEB for it but so far to no avail.
Thanks in advance.
Albert
View 2 Replies
View Related
Feb 8, 1999
In moving from odbc driver 2.65 to 3.6, we are getting a new error message.
'Unable to connect to data source xxxxx. Your user name or password may be incorrect.'
[Microsoft][ ODBC Driver Manager] Driver does not support this function. Has anyone else
had this problem? Thanks for any assistance. Karen Suenram
View 1 Replies
View Related
Aug 21, 2002
I have just restored a database which is quared thru a program written in visual basic. I need to set up the ODBC data source on the workstations and keep getting the error Sql server Error:4064 can not open user default database. Any ideas? also when you restore a database do the users & permissions come with the restore?
View 1 Replies
View Related
Sep 1, 2004
Hi,
I am presently using Client Access ODBC driver (32-bit) to connect to the AS400. I have set up a linked server that enables me to run queries against the AS400 using the driver. However I seek to have a driver that could give better performance. Right now I can extract 6 million rows from the AS400 table in like 2 hrs. Now is there an ODBC driver that can do better than that? Also I seek an evaluation edition of the driver if possible. Moreover I am the only developer and so a single user license is what I can have my supervisor budget.
Thanks,
Vivek
View 1 Replies
View Related
Mar 16, 2004
Hi,
I have the following requirement :
I need to have a way to intercept the SQL queries from an application written in VB and using a ODBC driver and modify the SQL queries before it goes through the ODBC driver and then to the database. This I need to do without modifying the original application.
The solution I have in mind is to write a ODBC virtual driver and configure my application to use my virtual ODBC driver. The ODBC virtual driver in turn will use the actual ODBC driver to the database. The virtual driver will basically intercept the SQL queries, modify it and then give it to the real ODBC driver.
My question is
1. Is this a feasible solution?
2. What should I do in order to implement the vitrtual ODBC driver.
3. Any pointer will be appreciated.
Thanks
Jake.
View 3 Replies
View Related
Mar 29, 2004
Hi,
I need transformation data from files Btrieve (.dt) to any other formats. Where i can download driver ODBC or OLE DB for Btrieve?
And how install this driver?
Thank.
View 7 Replies
View Related
Feb 9, 2007
Could someone tell me how to use a query with a "connection string" to connect to an ODBC driver and retrieve data from its tables. I am new at this and have been having a lot of trouble connecting from the SSIS manager. If someone has a tutorial on how to do this. I would really appreciate it.
Thanks
View 3 Replies
View Related
Dec 20, 2007
I am new to Microsoft and have been tasked with writting and ODBC Driver.
I've looked through the MSDN site and found a number of articles that discuss ODBC Driver development. I've read through the ODBC API reference manual and have a pretty good idea what needs to be done.
What I need to move forward is to find some example code that I can look at. An article that identifies the steps to creating and deploying an ODBC driver would be great!
Does anyone know where I can find some ODBC Driver example code? Would it help if I had an MSDN Subscription?
Any suggestions would be appreciated.
Thanks,
View 3 Replies
View Related
Mar 21, 2008
Hi;
I am having problem figuring out if the JDBC Driver for MS SQL Server 2005 is faster or setting up a data source from Administrative tools/Data Sources. I have run several tests and in all tests, the odbc datasource is faster. In that case, why having the trouble of downloading a driver if I am not wrong. I have understood that the native driver is always faster than the odbc bridge.
Thanks in advance
View 8 Replies
View Related
Mar 8, 2007
This is the Setup ...
On a Virtual PC i'm running an older Pervasive Btrieve App. That can be reached by a ODBC driver.
This Virtual PC runs om a 64bit Vista. On that 64bits Vista machine i'm running a 64bits instance of sql server and a 32bits, because there seems to be no way to have the 64bits instance use a 32 bits odbc driver.
From the production server (EntEd 32bits) i'm changing the ip of the Server in de Systsm_DSN to my Virtual PC. When testing the odbc driver it works, and using a select through the linked server works fine too.
When creating the same linked server on my Vista/32BitsSql Server it works too. But when selecting data i'm getting this error
OLE DB provider "MSDASQL" for linked server "VSERVER" returned message "[Pervasive][ODBC Client Interface][Client LNA]Your connection to the server is no longer working. To continue, disconnect from the data source and re-connect again. Contact your system administrator if you still need assistance.".
Msg 7306, Level 16, State 2, Line 1
Cannot open the table ""VANLIER"."SUP"" from OLE DB provider "MSDASQL" for linked server "VSERVER".
Is there a way to find out what's happening ??
View 1 Replies
View Related
Sep 8, 2006
dear all:
I used ADO to connection excel file(excel2003); below is the source code:
Dim Conn,Driver,DBPath,Rs, defaultPath
defaultPath=Replace(xlsFile, "VQAUser.xls", "")
Set Conn = Server.CreateObject("ADODB.Connection")
Driver="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & xlsFile & ";Extended Properties=""Excel 8.0; HDR=yes;"";"
Driver="DBQ="&xlsFile&";DRIVER=Microsoft Excel Driver (*.xls);UID=admin;UserCommitSync=Yes;Threads=3;SafeTransactions=0;ReadOnly=0;PageTimeout=5;MaxScanRows=8;MaxBufferSize=2048;FIL=excel 8.0;DriverId=790"
Driver="DRIVER=Microsoft Excel Driver (*.xls);DriverId=790;DefaultDir="&defaultPath&";DBQ="&xlsFile
Conn.Open Driver
but, when executed "conn.open Driver" it has an error like below:
錯誤類型：
Microsoft OLE DB Provider for ODBC Drivers (0x8007000E)
[Microsoft][ODBC Excel Driver] 系統資�滿載。
/webflow/eforms/337/readexcel.asp, line 20
�覽器類型：
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.1)
Any one can help me to fix this problem?
thanks in advance.
View 5 Replies
View Related
