BIDS: Exception Of Type 'System.OutOfMemoryException' Was Thrown.
Mar 3, 2008
All,
I have a large package (I know the recommendation is to have one package per data flow.) It has 20+ data flows in it. Personally I have found it much too complex to manage dozens of packages just because I want to have more than one data flow in my package.
I have been working on this package in an iterative manner over the past several months. Recently, I noticed I started getting the error message: "Exception of type 'System.OutOfMemoryException' was thrown" when I went to save my package. This is _extremely_ frustrating, because when this happens, all the changes I have made are generally lost. Occasionally, I have noticed if I close some other BIDS windows, or just wait a bit, I will be able to click save again, and it will actually save. Usually, I am forced to just "end-task" Visual Studio.
Other than splitting the package up into 20 separate packages, is there a way around this problem? I would rather put up with the lost changes than switch to dealing with 20 separate packages. It just makes things to difficult to manage when everything is split up into so many packages - particularly when I am passing variables around from parent to child packages.
Please help!
Thanks,
David Baldauff
View 13 Replies
ADVERTISEMENT
Jan 31, 2007
Hi,
I got an strange problem with one of my packages.
When running the package in VisualStudio it runs properly, but if I let this package run as part of an SQL-Server Agent job, I got the message "The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown." on my log and the package ends up with an error.
Both times it is exactly the same package on the same server, so I don't know how the debug or even if there is anything I need to debug?
Regards,
Jan
View 2 Replies
View Related
Mar 17, 2008
I starting getting the error above today when attempting to deploy updated DSV's and Report models. I can't seem to locate any info about this error - seems like a generic one. We're on 2005 SP1 (think we're on build 2221). Any help is appreciated!
View 5 Replies
View Related
Jan 16, 2008
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
View 1 Replies
View Related
Jan 18, 2008
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
View 2 Replies
View Related
Mar 4, 2008
My SqlConnection is causing an error "sqlConn.ServerVersion threw an exception of type System.InvalidOperationException". Everything I have read seems to suggest that there is a problem with my SQLConnection parameters but as you can see from the commeted code below I have tried three different servers with four different configurations. I am out of ideas on what is causing the error.
Thanks - Amy
Here is a section of my code:
String sqlStmt = "Select [UserName], [Password], [Last], [First] from Contacts Where Login=@Uid AND Password=@Pwd";
SqlConnection sqlConn = new SqlConnection("Data Source=localhost;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=pe2800;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=HorizonDC02;Initial Catalog=test;Integrated Security=SSPI;");//SqlConnection sqlConn = new SqlConnection("Data Source=HorizonDC02;Initial Catalog=test;User ID=username;Password=password;");
SqlCommand sqlCmd = new SqlCommand(sqlStmt, sqlConn);sqlCmd.Parameters.Add("@Uid", SqlDbType.VarChar, 30).Value = uid;sqlCmd.Parameters.Add("@Pwd", SqlDbType.VarChar, 30).Value = pwd;sqlCmd.Connection.Open();
View 2 Replies
View Related
Feb 9, 2006
Getting this error "Exception Has been thrown by the target of an invocation" when trying to create Integration Services Project. Any ideas what can be wrong?
Thanks.
View 3 Replies
View Related
Nov 28, 2006
I have this exception on page loading, is there any solution for this how can I fix this exception...
View 2 Replies
View Related
Sep 7, 2006
Hi,I'm developing a desktop C# app that uses SQL Everywhere as an embedded database. I generated strongly typed DataSet and use that to populate a DataGrid on my app.When the app first loads, it populates the DataGrid with a line like this:
this.sTORE_INV_LNTableAdapter.Fill(this.inventoriesDataSet.STORE_INV_LN);
That all works fine. Later on, after adding more data to the database (through reading a csv file), I wanted to refresh the display on the DataGrid.
I used the same line of code:
this.sTORE_INV_LNTableAdapter.Fill(this.inventoriesDataSet.STORE_INV_LN);
however, this time, the following exception was thrown:
The database file cannot be found. Check the path to the database. [ File name = .\Inventories.sdf ]
Does anyone know what may be going on? I saw this article about a bug in VS 2005 when using strongly typed DataSets (http://channel9.msdn.com/wiki/default.aspx/MobileDeveloper.DatabaseCannotBeFoundErrorInTypedDataset)
but that doesn't seem to apply here.
The connection string is identical both times that line of code is called so I'm a bit baffled with what's going on.
Any help would be appreciated. Thanks,
Jose
View 9 Replies
View Related
Aug 14, 2007
Hi,
I replace the reference assembly System.Data.SqlServerCe with version 3.5 beta2 in Microsoft.Practices.EnterpriseLibrary.Data.SqlCe. When I used the Data.SqlCe block in application, an exception ("Cannot access a disposed object named SqlCeConnection") threw. This didn't occur in SSCE 3.5 beta1 and early versions.
Finally I found the difference between beta1 and beta2.
In the SqlCeConnection class, there is a RemoveWeakReference method. this is code snippet of beta1:
internal void RemoveWeakReference(object value)
{
if (this.weakReferenceCache != null)
{
this.weakReferenceCache.Remove(value);
}
}
and this is for beta2:
internal void RemoveWeakReference(object value)
{
if (this.weakReferenceCache == null)
{
throw new ObjectDisposedException("SqlCeConnection");
}
this.weakReferenceCache.Remove(value);
}
So, if we dispose a connection before a command, such as:
SqlCeConnection cn;SqlCeCommand cmd;... cn.Dispose();cmd.Dispose(); // Error, an exception will be threw. Is it a bug of Beta2?
View 1 Replies
View Related
Sep 5, 2007
I have been encountering a problem using a CLR Assembly in SQL server. The Assembly is one provided by Microsoft for an example on using Exchange web services with SQL server.
http://www.microsoft.com/downloads/details.aspx?FamilyId=D6924897-7B62-46FD-874E-24FB0FBA2159&displaylang=en#Requirements
Essentially what this package is, is a set of c# classes that access the Exchange 2007 Web Services via a set of user defined functions and views in MS SQL Server 2005.
We have not modified the code except to configure for our host environment.
We are able to register the assembly using the setup.sql file included. But when we try to access any of the views or use the functions we get the following error:
Msg 10314, Level 16, State 11, Line 10
An error occurred in the Microsoft .NET Framework while trying to load assembly id 65551. The server may be running out of resources, or the assembly may not be trusted with PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check documentation to see how to solve the assembly trust issues. For more information about this error:
System.IO.FileLoadException: Could not load file or assembly 'exchangeudfs, Version=0.0.0.0, Culture=neutral, PublicKeyToken=777b97dde00f3dbe' or one of its dependencies. The given assembly name or codebase was invalid. (Exception from HRESULT: 0x80131047)
System.IO.FileLoadException:
at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.Load(String assemblyString)
We have 3 testing environments. 2 Windows 2003 servers called test and test2. Also a single Windows 2000 server called test3. Test and test2 have a full suite installed on them, web server, exchange 2007, sql server 2005, they are also domain controllers for their own domains.
We get the above error on test and test2 but it runs fine on test3. Test and test2 represent what our production environment is like. Test3 was just part of our troubleshooting process.
We have tried a lot to make this work. Here are some details on the things we have tried.
The database is set up to allow CLR Assemblies. This is part of the setup.sql.
The assembly's permission is set to external_access.
We have gone all the way to setting the file permissions on the dll to full control to the Everyone group.
We have tried different accounts to run the SQL Service. We've tried the system account, the local admin account and a seperate user account.
The database we are using is a fresh brand new database. Therefore it does not fit into the bug reported in this article:
http://support.microsoft.com/kb/918040
I am really at a loss to where to go from here. Any ideas on why this 'out of the box' solution is causing us so many headaches would be appriciated.
Thanks,
Tim
View 4 Replies
View Related
Oct 24, 2007
I just opened a large table with about 800 columns and 300,000 rows.
Doing the right click open on table displays message: Exception has been thrown by the target of an invocation.
Please help me determin what the error is and how to solve it.
I have google it for days now and no one has similar situation as mine. Many have same error, but their fix is not relevant to my issue. If you know about some SQL query limit please let me know.
Funny thing is that if I right click table and do script ---> select, then it does pull the data. ONly doesn't work when I do "Open Table."
Thanks for your help.
View 1 Replies
View Related
Oct 7, 2015
I have a custom SSIS Script task (c# code) which , using WINSCP secure FTP libraries, downloads files from an FTP server to local folder.This works perfectly fine on my personal machine.But when I deploy the project on to Catalog, and try and run the same SSIS package using Agent Service , I get this error -Â "Exception has been thrown by the target of an invocation."
The Service account used to run the package (on the server) has all the needed permissions to write into the folder on the server.
View 5 Replies
View Related
Sep 1, 2015
've got an execute task that take data from a simple table ,I set up the variable Passing as object and I pass the variable to a For Each loop container..
I call the variable in the for each loop container and using the script VB I try to msgbox the variable but it gives me the error:
exception has been thrown by the target of an invocation.
What's wrong?
View 4 Replies
View Related
Apr 2, 2008
Help,
I get the following exception anytime I attempt to open a .dtsx file in the SSIS project in VS2005:
"External component has thrown an exception. (System.Windows.Forms)"
I haven't made any changes to this project and it was up and running fine a week or so ago. Any ideas? Help.
Thanks - Wayde
View 5 Replies
View Related
Apr 20, 2007
Hi I have an issue while attempting to clean/build my Integration Services solution which prevents me creating my deployment SSIS deployment package.
The solution comprises of around 73 packages totally a physical file size of 103 MB. Most packages are ~1/2 MB with a ~1/2 packages around the 4/5/6 MB
I cannot seem to clean or build/rebuild the solution as I keep getting the following exception message
Error 1 Error loading €˜PACKAGE_NAME.dtsx' : Exception of type 'System.OutOfMemoryException' was thrown.. C:FOLDER1PACKAGE_NAME.dtsx 1 1
This randomly occurs with different packages but the commonality is it occurs with the package above 4MB.
My workstation has Windows XP Professional with SP2 and 2GB RAM and Visual Studio 2005 with SP1 and SQL Server 2005 with SP2.
A look at task manager in Windows shows the devenv.exe process to be ~675MB when the above exception occurs. There are no other applications running in the background.
Can anybody kindly suggest any possible resolutions or any known fixes for this problem? Maybe the possible to build SSIS packages from a command prompt?
Many Thanks in advance
View 3 Replies
View Related
Mar 10, 2008
Hi,
when I´m trying to save a SSIS Package in Visual Studio I´m having the following problem:
===================================
Exception of type 'System.OutOfMemoryException' was thrown. (Microsoft Visual Studio)
------------------------------
Program Location:
at System.String.GetStringForStringBuilder(String value, Int32 startIndex, Int32 length, Int32 capacity)
at System.Text.StringBuilder.GetNewString(String currentString, Int32 requiredLength)
at System.Text.StringBuilder.Append(Char value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BufferTextWriter.Write(Char ch)
at System.IO.TextWriter.Write(Char[] buffer, Int32 index, Int32 count)
at System.IO.TextWriter.Write(Char[] buffer)
at System.IO.TextWriter.Write(String value)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
The dtsx is around 8MB size, I have installed the service pack, what else could be?
thanks
View 3 Replies
View Related
Nov 19, 2013
I have a SSIS package with Script task ,it performs basic operation of moving files to one location to another .It works fine in VS2012 environment and when i write a SQL job to execute the package ,it fails ,below is the error :
Code: 0x00000001    Source: Script Task_MoveOldFilestoArchive    Â
Description: Exception has been thrown by the target of an invocation. End ErrorÂ
DTExec: The package execution returned
DTSER_FAILURE (1). Started: 9:54:57 AM Finished: 9:54:58 AM Elapsed: 1.029 seconds. The package execution failed. The step failed.
View 4 Replies
View Related
Nov 20, 2007
I am trying to load a XML file into a string variable using a XML Task. The file is 67,936 KB. When I excecute the package in the dev environment I get the following error:
[XML Task] Error: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
Has anybody run into this before? In the next step I pass the XMLData string to a stored procedure which loads it into a table with a XML data type column.
View 4 Replies
View Related
May 8, 2007
Recently upgraded SQL Server 2005 x64 to SP2 and upto Build 3159. Since then the Maintenance Plan for Index Reorgs has failed with a System.OutOfMemoryException error. No other errors are logged anywhere. The plan report file has no information either.
Has anybody come across a similar issue?
Thank you.
View 2 Replies
View Related
May 15, 2008
Hi,
My server configuration is
Intel Xeon(R) X5355 @ 2.66GHz, 3.75 GB RAM
Win 2k3
I have been receiving the above mentioned error when I try to use the out of the box feature of "Export To Excel" provided in the Reporting Services, the reports are hosted on MOSS 2007 using the Reporting Services Add-In. The number of pages generated by the report is 500+, so I don't think exporting a report of around 500 - 1000 should give out a memory exception since we have sufficient RAM on the server.
Please advice a solution to solve the error.
Thanks in Advance.
Vikas Mestry.
View 4 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
May 17, 2006
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
View 13 Replies
View Related
Apr 23, 2007
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
View 3 Replies
View Related
Apr 20, 2008
when I call ((System.Collections.ICollection)resultSet.ResultSetView).Count multitime I get out of memory exception
does the calling of this statement reserve memory and how can I release it?
View 2 Replies
View Related
Jun 19, 2008
I'm getting this error on a vb.net page the needs to execute two separate stored procedures. The first one, is the main insert, and returns the identity value for the ClientID. The second stored procedure inserts data, but needs to insert the ClientID returned in the first stored procedure. What am I doing wrong with including the identity value "ClientID" in the second stored procedure?
Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.String' to type 'System.Web.UI.WebControls.Parameter'.Source Error:
Line 14: If li.Selected Then
Line 15: InsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.Value
Line 16: InsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")
Line 17:
Line 18:
Source File: C:InetpubwwwrootIntranetExternalAppsNewEmploymentClientNewClient.aspx.vb Line: 16
Here is my code behind... What am I doing wrong with grabbing the ClientID from the first stored procedure insert?
Protected Sub InsertNewClient_Inserted(ByVal sender As Object, ByVal e As SqlDataSourceStatusEventArgs)ClientID.Text = e.Command.Parameters("@ClientID").Value.ToString()ViewState("ClientID") = e.Command.Parameters("@ClientID").Value.ToString()End SubProtected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.ClickInsertNewClient.Insert()For Each li As ListItem In CompanyTypeID.Items
If li.Selected ThenInsertClientCompanyType.InsertParameters("CompanyTypeID").DefaultValue = li.ValueInsertClientCompanyType.InsertParameters("ClientID") = ViewState("ClientID")InsertClientCompanyType.Insert()End IfNextEnd Sub
View 2 Replies
View Related
Aug 13, 2007
Hi,
I have developed a custom server control for .NET Framework 2.0. The server control has a property named BinaryData of type byte[]. I marked this property to be data bindable. Now, I have varbinary(Max) type of field in my SQL Database and I have used SQLDataSource and bound this varbinary(Max) field with the property BinaryData (byte[]) of my control. It is working fine as long as the data value is not NULL. Now, In my control, I have handled the NULL value so that no Exception is thrown. Still, when I bind this property using the SQLDataSource, I get Error "Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'." I am not sure if I can do anything to stop this erro within my control. If it is not possible from the control, then what is the workaround that I can do in my ASPX page in order to stop this error ?
Thanks a lot in advance.
View 10 Replies
View Related
Dec 31, 2007
Hi, I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'." All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx
View 3 Replies
View Related
May 26, 2006
This is my error text... how do I get this nonsense to stop?!
===================================
Exception of type 'System.OutOfMemoryException' was thrown. (Microsoft Visual Studio)
------------------------------
Program Location:
at System.String.GetStringForStringBuilder(String value, Int32 startIndex, Int32 length, Int32 capacity)
at System.Text.StringBuilder.GetNewString(String currentString, Int32 requiredLength)
at System.Text.StringBuilder.Append(Char value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BufferTextWriter.Write(Char ch)
at System.IO.TextWriter.Write(Char[] buffer, Int32 index, Int32 count)
at System.IO.TextWriter.Write(Char[] buffer)
at System.IO.TextWriter.Write(String value)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
View 1 Replies
View Related
Nov 27, 2007
hi i dont know how to do type casting.
this.Variables.ObjVariable this objVariables i have create in variable place below like this
Name:Variable datatype int32 values 0
Name: NumberofRowsdatatype int32 values 10000
Name: ObjVariable datatype Object
My code
public override void CreateNewOutputRows()
{
/*
Add rows by calling the AddRow method on the member variable named "<Output Name>Buffer".
For example, call MyOutputBuffer.AddRow() if your output was named "MyOutput".
*/
System.Data.OleDb.OleDbDataAdapter oLead = new System.Data.OleDb.OleDbDataAdapter();
//System.Data.Odbc.OdbcDataAdapter oLead = new System.Data.Odbc.OdbcDataAdapter();
//SqlDataAdapter oLead = new SqlDataAdapter();
System.Data.DataTable dt = new System.Data.DataTable();
DataSet ds = (DataSet)this.Variables.ObjVariable; // here i am getting error
ds.Tables.Add(dt);
ADODB.Record rs = new ADODB.Record();
oLead.Fill(ds, rs, "Variables");
foreach (DataRow row in dt.Rows)
{
{
Output0Buffer.AddRow();
Output0Buffer.Column = (int)row["Column"];
Output0Buffer.Column1 = row["Column1"].ToString();
Output0Buffer.Column2 = row["Column2"].ToString();
}
}
}
}
This is the error
Unable to cast object of type 'System.Object' to type 'System.Data.DataSet'.
at ScriptMain.CreateNewOutputRows()
at UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
thanks
kedaranth
View 5 Replies
View Related
Aug 21, 2006
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
View 28 Replies
View Related
Mar 18, 2008
I want to have some static text in spanish on my report.. and what is the best way to do it.. any link or help will be appreciated..
Regards,
Karen
View 5 Replies
View Related
Mar 21, 2007
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
any idea ? .
chi
View 6 Replies
View Related
