BROKER_QUEUE_DISABLED Supported On SQL Express?
Jul 31, 2007
Is this event notification supported on SQL Express or no? I found it surprising that, despite seeing the correct entries in sys.event_notifications, I never received this event notification (BROKER_QUEUE_DISABLED) when the queue became disabled. Its my understanding that the only thing that will cause a queue to disable is 5 consecutive rollbacks, so I was suprised when I didn't get any indication that the queue turned off. The rollbacks would have occurred in a .NET application if that makes a difference, whereas my handling of the event notification was in SQL Express. This worked fine when testing on SQL Developer, by the way.
Thanks!
View 1 Replies
ADVERTISEMENT
May 31, 2006
I have created a queue and service all in the same database as follows:
CREATE QUEUE ODS.[Queue Watch];
CREATE SERVICE [Queue Watch Service]
ON QUEUE [Queue Watch];
Next I created an event Notification as:
CREATE EVENT NOTIFICATION [OrderQueueDisabled]
ON QUEUE [ODS].[Order Process Queue]
FOR BROKER_QUEUE_DISABLED
TO SERVICE 'Queue Watch Service', 'current database';
When I get the queue to disable ([ODS].[Order Process Queue] ) by setting the activated stored procedure to do a 'Select 1/0', I don't get a message in the ODS.[Queue Watch] queue. There is nothing returned from any of the following queries:
Select * from sys.transmission_queue
SELECT * FROM sys.server_event_notifications
Select * from [ODS].[Queue Watch]
select * from sys.dm_qn_subscriptions
All of this is running the same database.
.
View 6 Replies
View Related
Nov 10, 2007
Hi All,
Can you please kindly let me know whether DAC(Dedicated Administration Connection) is supported in SQL Server 2005 Express Edition. As per the documentation available in MSDN(Trace Flags), Trace Flag
7806 Enables a dedicated administrator connection (DAC) on SQL Server Express. By default, no DAC resources are reserved on SQL Server Express.
But when i tried to enable it by passing -T7806 as a parameter to SQL Server (SQL Express) service, the following information is logged into event viewer
Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
Also, the following error message is displayed when I tried to connect to DAC from command prompt
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 43 - An error occurred while obtaining the dedicated administrator connection (DAC) port. Make sure that SQL Browser is running, or check the error log for the port number) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
The version of SQL Server I'm using is
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6000: )
Can someone kindly me help me to enable DAC of SQL Express edition?
Many thanks in advance.
Gopoinath
Tech Thoughts
View 10 Replies
View Related
Aug 2, 2006
I've downloaded SQL Server Express with Advanced Services from http://msdn.microsoft.com/vstudio/express/sql/download/ and installed all components. When I try to create a full-text catalog, I get the following message:
No full-text supported languages found.
select * from sys.fulltext_languages
returns no lines.
How
can neutral, English or maybe Hungarian word breakers be installed?
Thanks
View 10 Replies
View Related
Aug 7, 2006
SQL2K5
SP1
Howdy all. I'm trying to open up Dedicated Admins Connection in Management Studio and getting "DAC's are not supported. (Object Explorer)"
Any idea's?
TIA, cfr
View 2 Replies
View Related
Nov 10, 2007
Hi,
I have created the below procedure in SQL SERVER 2005.
But when I copy out the same in SQL SERVER 2000. I get an error at the underlined place. It says
Line 32: Incorrect syntax near '('.
ALTER procedure [dbo].[VTELcardvalidation1]
@CardValue1 int,
@CardValue2 int,
@CardValue3 int,@Result nvarchar(50)output
as
begin
declare @CrdPinNo varchar(100)
declare @CrdNo nvarchar(100)declare @count int
declare @inc int
declare @concat nvarchar(200)create table #temptable(crno nvarchar(50),pno nvarchar(50))
--First Card
--Change here
select @count=count(cardno) from vendorcardvalidation where cardvalue=1500 and flag=0if (@count)>@CardValue1
begin
declare cur1 cursor forselect top(@CardValue1) pin,cardno from vendorcardvalidation where cardvalue=1500 and flag=0 order by cardno
open cur1fetch next from cur1 into @CrdPinNo,@CrdNo
while(@@fetch_status=0)
beginupdate vendorcardvalidation set flag=1 where cardno=@CrdNo
insert into #temptable values(1500,@CrdPinNo)fetch next from cur1 into @CrdPinNo,@CrdNo
endclose cur1
deallocate cur1
set @Result='Success'end
else
begin
set @Result='Failure'
end
select * from #temptable
drop table #temptable
end
It seems the the word 'top' will not be supported in sqlserver 2000. What should I do?
Regards
cmrhema
View 3 Replies
View Related
Jul 17, 2000
I have the following VB function. The stored proc that is being called
("GetList") inside the function does a simple SQL Select statement against
an SQL Server 7 database using OLE DB. I'd like to store the result of the
SQL Select statement in the "Rs" parameter to pass back to the calling
function. Whenever I call this function, I get an error message stating "No
Such Interface Supported". Does anyone know why I cannot do this?
Also, this function is being called from ASP code. That's why the "Rs" is
passed as a variant. It's created in the ASP code before this function is
called.
------------------------------------------
Function GetAddressDropDownList(Rs As Variant, CustomerId As Long)
Dim ProcComm
Dim Parameter
Set ProcComm = CreateObject("ADODB.Command")
ProcComm.CommandType = adCmdStoredProc
ProcComm.CommandText = "GetList"
Set Parameter = ProcComm.CreateParameter("CustomerId", adInteger,
adParamInput)
Parameter.Value = CustomerId
ProcComm.Parameters.Append Parameter
Set Parameter = Nothing
ProcComm.ActiveConnection = BuildConnectionString()
Rs.CursorLocation = adUseClient
Rs.Open ProcComm, , adOpenForwardOnly
Set Parameter = Nothing
Set ProcComm = Nothing
End Function
View 1 Replies
View Related
Sep 9, 1999
How many "applications" can be loaded onto Microsoft SQL Server 6.5?
Additional Information:
The OS platform is Windows NT Server 4.0 (SP5) on a Compaq ProLiant 1600 (PII 450) with 256Mb RAM
Proposed applications, although this probably will mean little, are Dataview (club membership) Peterborough (payroll) and Positive (HR).
Any assistance would be appreciated.
Thanks
Robert
robert@whiteley.com
View 1 Replies
View Related
Mar 7, 2008
SUM(qtycolumn) OVER (PARTITION BY columnA, Column B)
is this function supported by Sql Ce?
View 1 Replies
View Related
Dec 27, 2006
Hello All,
I need to know if SQL 2000 32 bit is supported on a Windows 2003 64 bit on a x86 processor server. The server is clustered.
View 3 Replies
View Related
Feb 9, 2007
Does the Compact edition support the MARS feature (multiple active result sets) of SQL Server 2005?
View 3 Replies
View Related
Oct 2, 2007
I am viewing a list of the reserved keywords for CE 3.5 and OPENXML is listed. Can you please tell me how I would implement this in CE 3.5? Since only one SQL statement can be sent with a SqlCeCommand then how can you prepare the document, access the xml data with OPENXML, and then close the document handle all in one call? For example, I have the following TSQL code in a SQL Express stored procedure and need to port it over to CE 3.5. Could you please help with some great ideas on how to go about this porting task?
CREATE PROCEDURE [SaveConfigurationMiscs]
(@XmlData Text)
AS
SET NOCOUNT ON
DECLARE @iDoc Int
/* Create an internal representation of the XML document. */
EXEC sp_xml_preparedocument @iDoc OUTPUT, @XmlData
/* Dump XML Data into an in memory table */
DECLARE @ConfigurationMiscs TABLE (
ConfigurationMiscID Int,
ActiveLaunchMonitor NVarChar(50),
UseModeledShots Bit,
DeleteRecord Int
)
INSERT INTO @ConfigurationMiscs (ConfigurationMiscID, ActiveLaunchMonitor, UseModeledShots, DeleteRecord)
SELECT X.ConfigurationMiscID, X.ActiveLaunchMonitor, X.UseModeledShots, X.DeleteRecord
FROM OPENXML (@iDoc, '/xml/ConfigurationMisc')
WITH (
ConfigurationMiscID Int,
ActiveLaunchMonitor NVarChar(50),
UseModeledShots Bit,
DeleteRecord Int
) X
/* Clean up XML resources */
EXEC sp_xml_removedocument @iDoc
/* Update */
UPDATE Table_ConfigurationMiscs
SET
Table_ConfigurationMiscs.ActiveLaunchMonitor = X.ActiveLaunchMonitor,
Table_ConfigurationMiscs.UseModeledShots = X.UseModeledShots
FROM ConfigurationMiscs Table_ConfigurationMiscs
INNER JOIN
@ConfigurationMiscs X ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
X.ActiveLaunchMonitor IS NOT NULL AND
X.UseModeledShots IS NOT NULL
/* Insert New */
INSERT INTO ConfigurationMiscs (ConfigurationMiscID, ActiveLaunchMonitor, UseModeledShots)
SELECT X.ConfigurationMiscID, X.ActiveLaunchMonitor, X.UseModeledShots
FROM @ConfigurationMiscs X
LEFT JOIN
ConfigurationMiscs Table_ConfigurationMiscs ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
Table_ConfigurationMiscs.ConfigurationMiscID IS NULL AND
X.ActiveLaunchMonitor IS NOT NULL AND
X.UseModeledShots IS NOT NULL
/* Delete Old */
DELETE Table_ConfigurationMiscs
FROM ConfigurationMiscs Table_ConfigurationMiscs
INNER JOIN
@ConfigurationMiscs X ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
X.ConfigurationMiscID IS NOT NULL AND
X.DeleteRecord IS NOT NULL
RETURN
GO
View 1 Replies
View Related
Mar 10, 2008
Is there a _complete_ known good list of OS support for sql express 2005? Is is going to install on vista home basic, etc.?
View 1 Replies
View Related
Mar 23, 2006
Having sucessfully tested mirroring, I've suggested we should implement it at my place of work.
However, they are non too pleased that it is not yet officialy part of SQL Server 2005 and therefore not supported, does anyone know when it will be in standard edition? because I really really need to know...
Thanks
View 4 Replies
View Related
Jun 27, 2006
Hello there.
I'm developing an eCommerce solutions based on the ASP.NET 2.0 Commerce Starter Kit, architechture. It uses the Provider Pattern. In my web-application, i use the CatalogProvider, to retrieve data from a SQL Server 2005 database. I call the methods through a handler class, whoch excists inside the WebApp. I also use a ShoppingCartProvider, OrdersProvider, ShippingProvider etc. in the same way.
In my Web.Config file, i have all the provers listed, and on each provider, the name of the connectionString to use are given.
My connection string looks like this:"connString" connectionString="Server=xxxx;Database=xxxx;Trusted_Connection=True;" providerName="System.Data.SqlClient" />
The problem is, that suddently, when browsing the website, that connects to the database through the providers, i get this error:
Keyword not supported: ',server'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: Keyword not supported: ',server'.Source Error:
Line 31: public static IDataReader GetProductsByCategory(int categoryID)
Line 32: {
Line 33: return Commerce.Providers.CatalogProvider.Instance.GetProductsByCategory(categoryID);
Line 34: }
Line 35:
Source File: d:DevelopmentASPNETSeoShopApp_CodeHandlersCatalogManager.cs Line: 33 Stack Trace:
If i then go back to my web.config file, and removes the providerName section, of the connectionString, the website works again, for a short period. When the error return, i undo the deletion of the providerName, and it will work again... For a short time...
I've also tried to use another connectionsString, like this:Data Source=Aron1;Initial Catalog=pubs;Integrated Security=SSPI
But then the keyword which is not supported is: ', data source'
Does anyone know what the issue might be?
Thanks in advance...
View 9 Replies
View Related
Jun 10, 2008
hi,i am trying to connect sql server 2005 from my asp.net applicationi have create DSN for this ..then i am getting the following errorKeyword not supported: 'dsn'. in sql serverplease provide me the solution
View 5 Replies
View Related
Apr 5, 2004
y am i having keywork not supported? is there anything wrong with my connection string ??
==========web config================
<appSettings>
<add key="db" value="icms" />
<add key="db_user" value="sqladmin" />
<add key="db_server" value="server" />
<add key="db_pwd" value="12345" />
<add key="session_timeout" value="600" />
</appSettings>
==========DB.vb==============
Dim myDB As New SqlConnection
Dim myCMD As New SqlCommand
Public Sub New()
Dim db_server = AppSettings("db_server")
Dim db = AppSettings("db")
Dim db_user = AppSettings("db_user")
Dim db_pwd = AppSettings("db_pwd")
Dim DBConnection As String = "DRIVER={SQL Server};" & _
"SERVER=" & db_server & ";" & _
"DATABASE=" & db & ";" & _
"UID=" & db_user & ";" & _
"PWD=" & db_pwd & ";" & _
"OPTION=3;"
myDB.ConnectionString = DBConnection
myCMD.Connection = myDB
End Sub
=============================
View 6 Replies
View Related
Apr 12, 2004
Hello community!
Short question:
how can i retrieve all code pages that MSSQL server is installed with?
Thank you in advance for your help.
View 1 Replies
View Related
Sep 4, 2001
The error in the subject line "The property 'Use Encryption for Data' is not supported" is encountered when running a DTS package via a job step in SQL Server 7.0. The problem is not encountered when executing the DTS package interactively via Enterprise Manager from my PC. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on my PC, I notice a Use Encryption for Data Property. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on the Server, the Use Encryption for Data Property does not appear. Service Pack 3 for SQL 7.0 is installed on both my PC and on the SQL Server. I suspect this Property difference for OLE DB could be related to the fact that I installed Enterprise Manager for SQL 2000 on my PC at one time and then uninstalled. Any ideas how to correct this situation?
View 1 Replies
View Related
Feb 15, 2007
Any body please give me the details about how to use 'ALLOW_DUP_ROW' in a CREATE CLUSTERED INDEX statement.
I tried executing the below statement but it throws an error "CREATE INDEX option 'ALLOW_DUP_ROW' is no longer supported."(both in SQL Server 2000 and SQL Server 2005)
CREATE CLUSTERED INDEX index121
ON raj(j)
WITH ALLOW_DUP_ROW
raj(j) contains two rows with same value
please hhelp me out
View 2 Replies
View Related
Jan 19, 2006
I am working on the sample SQL Mobile application as located at:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/med302_msdn_sql_mobile.asp?frame=true
I am getting a SqlCeException as:
"The specified locale is not supported on this operating system."
The error is being thrown at line: int returnValue = this.Adapter.Fill(dataTable);
in the autogenerated code of SqlMobileDataSet.Designer.
My machine is Win XP SP2 (Hindi LIP installed). I am running VS 2005 and SQL 2005 (RTM). I am testing using DMA transport on Win Mobile 5.0 PPC Emulator.
Could someone suggest what steps do I need to take to solve this issue?
Cheers
Abhishek
View 4 Replies
View Related
Sep 28, 2007
Is a NOCHECK constraint supported in CE 3.5? The keyword is listed in the 3.5 BOL but when attempting to ALTER TABLE using WITH NOCHECK the statement fails.
If it is not supported then is there a work around for it?
TIA
View 1 Replies
View Related
Jan 22, 2007
I am using Vista and when I try to open one of the Business intelligence reports, I get error "Locale 16393 not supported". Any clue on this ?
Thanks
View 1 Replies
View Related
Feb 9, 2006
I am having a problem running a sql2k report service script on my new sql2005 server. It seems that the methods SessionHeader() and rs.render are no longer suport. can someone help me figure out what I need to do to continue automating my report running?
rss file contents: (the parts that should matter)
-----------------------------------------------------------------------------------------
Report Parameters
Dim branch as string = nothing
Dim skipreport as string = nothing
dim skip as integer = 0
dim allbranchreport as string = nothing
dim allbranch as integer = 0
dim report as CatalogItem
dim repname as string = nothing
dim specificreport as string = nothing
dim filepath as string = nothing
dim errorpath as string = nothing
dim basefilepath as string = nothing
dim baseerrorpath as string = nothing
dim errorlog as integer = 0
Dim parameters() As ParameterValue = nothing
Dim paramcount as integer = 0
' Render arguments
Dim result As Byte() = Nothing
Dim reportPath As String = nothing
'Dim format As String = "PDF"
Dim format as string = "EXCEL"
Dim historyID As String = Nothing
Dim devInfo as string = Nothing
Dim credentials As DataSourceCredentials() = Nothing
Dim showHideToggle As String = Nothing
Dim encoding As String
Dim mimeType As String
Dim warnings As Warning() = Nothing
Dim reportHistoryParameters As ParameterValue() = Nothing
Dim streamIDs As String() = Nothing
Dim sh As New SessionHeader()
rs.SessionHeaderValue = sh
Dim omitdocmap as string = "True"
'**************************************
'**************************************
'Repset run
Dim repset as string = ""
for each repset in repsetlist
specificreports = specificreportsstart
if specificreports = 0 then
select case repset.tolower
case "all"
specificreports = 0
case "brkctr"
specificreports = 1
reportcount = reportset_brkctr.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_brkctr(reportloop)
next
case "cashmgmt"
specificreports = 1
reportcount = reportset_cashmgmt.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cashmgmt(reportloop)
next
case "com"
specificreports = 1
reportcount = reportset_com.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com(reportloop)
next
case "com_vw"
specificreports = 1
reportcount = reportset_com_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com_vw(reportloop)
next
repset = "com"
case "comcons"
specificreports = 1
reportcount = reportset_comcons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_comcons(reportloop)
next
case "cons"
specificreports = 1
reportcount = reportset_cons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons(reportloop)
next
case "cons_vw"
specificreports = 1
reportcount = reportset_cons_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons_vw(reportloop)
next
repset = "cons"
case "dep"
specificreports = 1
reportcount = reportset_dep.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_dep(reportloop)
next
case "staff"
specificreports = 1
reportcount = reportset_staff.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff(reportloop)
next
omitdocmapbranch = "False"
case "staff2"
specificreports = 1
reportcount = reportset_staff2.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff2(reportloop)
next
omitdocmapbranch = "False"
case else
specificreports = 1
redim specificreportslist(0)
specificreportslist(0) = "Undefined"
end select
if repset.tolower = "staff2" then repset = "staff"
End if
'Base values
basefilepath = basepath & client & "" & repset & ""
baseerrorpath = basepath & client & "" & "error_" & repset & "_"
'Reports List
Dim reports() as CatalogItem
reports = rs.ListChildren(basereportpath, False)
'Execution
if datasourceok = 1 then
for each report in reports
skip = 0
allbranch = allbranchrun
for each skipreport in skipreports
if report.name.tolower = skipreport.tolower then skip = 1
next
if skip = 0 then
if specificreports = 1 then
skip = 1
for each specificreport in specificreportslist
if report.name.tolower = specificreport.tolower then skip = 0
next
end if
end if
if skip = 0 then
for each allbranchreport in allbranchreports
if report.name.tolower = allbranchreport.tolower then allbranch = 1
next
Redim parameters(1)
parameters(0) = New ParameterValue()
parameters(0).name = "branchall"
parameters(1) = New ParameterValue()
parameters(1).Name = "branch"
'5 parameters reports
repname = report.name
if (repname.substring(0,5).tolower = "loans" or repname.substring(0,4).tolower = "locs") then paramcount = 4
if (repname.length >= 13) then
if repname.substring(0,13).tolower = "loans_beacons" then paramcount = 1
end if
if paramcount = 4 then
paramcount = 0
redim preserve parameters(4)
parameters(2) = New ParameterValue()
parameters(2).name = "comconsall"
if repset.tolower = "cons" or repset.tolower = "com" then parameters(2).value = 0 else parameters(2).value = 1
parameters(3) = New ParameterValue()
parameters(3).Name = "comcons"
if repset.tolower = "com" then parameters(3).value = "commercial" else parameters(3).value = "consumer"
parameters(4) = New ParameterValue()
parameters(4).Name = "brokered"
parameters(4).value = 0
if repset.substring(0,3).tolower = "brk" then parameters(4).value = 1
end if
'All Branches Reports
if allbranch = 1 then
parameters(0).value = "1"
parameters(1).value = "admin"
if client = "CSCU" then parameters(1).value = "newwst"
if clienttype = "vw" then parameters(1).value = "1"
errorlog = 0
filepath = basefilepath & report.name & ".xls"
errorpath = baseerrorpath & report.name & ".txt"
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapall
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " All branches")
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
'Other Reports
else
parameters(0).value = "0"
for each branch in branches
parameters(1).value = branch
errorlog = 0
if branch <> "h/o" then
filepath = basefilepath & branch & "" & report.name & ".xls"
else
filepath = basefilepath & "ho" & report.name & ".xls"
end if
if branch <> "h/o" then
errorpath = baseerrorpath & branch & "_" & report.name & ".txt"
else
errorpath = baseerrorpath & "ho_" & report.name & ".txt"
end if
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapbranch
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " " & "Branch: " & branch)
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
next
end if
end if
next
end if
next
----------------------------------------------------------------------------------------------------
I get this error message from cmd when I try and run my batch:
----------------------------------------------------------------------------------------------------
J:PRA Publisher>rs -i pra_publisher.rss -s http://localhost/reportserver -l 0
The specified script failed to compile with the following errors:
J:PRA Publisher> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vbc.exe" /t:exe
/main:MainModule /utf8output /R:"System.dll" /R:"System.Xml.dll" /R:"System.Web
.Services.dll" /R:"C:Program FilesMicrosoft SQL Server90Toolsinn
s.exe" /
out:"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.exe" /debug-
"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.0.vb" "C:Docu
ments and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb"
Microsoft (R) Visual Basic Compiler version 8.0.50727.42
for Microsoft (R) .NET Framework version 2.0.50727.42
Copyright (c) Microsoft Corporation. All rights reserved.
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(253) : error
BC30002: Type 'SessionHeader' is not defined.
Dim sh As New SessionHeader()
~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(254) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
rs.SessionHeaderValue = sh
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(434) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID, de
vInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(436) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(496) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID
, devInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(498) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
--------------------------------------------------------------------------------------------------------------------
Any advice on how to fix this would be graetly appreciated. Thanks!
View 6 Replies
View Related
Sep 19, 2007
I need to transmit data from a ##table to an .xls file. The data is exported only for the first time. However, after a while the table will be dropped by SQL Server 2005 automatically.
I'm using Execute SQL Task to check for the existence of an ##Table. And, if does not exists the ##table should be created or something like the example below.
Ex:
IF NOT EXISTS (
SELECT *
FROM ##StateProvince
)
SELECT * INTO ##StateProvince
FROM Person.StateProvince
GO
To keep the session of the ## Table active, but the following error is thrown :
The NOT SQL construct or statement is not supported.
View 4 Replies
View Related
Jul 27, 2006
ahi all
iam new to VS.net 2005 and iam trying to convert ready made application from vb.net 2003 to vb.net 2005
and i cant find the sqlcedataadapter
its a windows CE application uses SQL Server CE
and i imported the system.data.sqlsrverce
and i added the sqlserverce refrence
may be its a new classes?
View 1 Replies
View Related
Jul 12, 2007
Hi.
I'm just getting started with CE, and I'm a novice with SQL in general.
Can someone point me to the definitive source for what's supported in SQL Server CE v3.1? For example, I can't seem to use SELECT TOP, or even CREATE PROCEDURE.
BTW, is 3.1 the version I should be using?
Thanks.
View 3 Replies
View Related
Jun 14, 2007
Hi there,
I'm trying to run following script in sql command mode in OLE DB Source and it giving me "The OVER SQL construct or statement is not supported." error msg.
Code Snippet
Drop
Table #Tmp_EXT_AATransactions
Select row_number() over (partition by A3.jrnentry,A32.aaGLDistID order by A32.aaGLDistID,A33.aaTrxDimID ) as rownum,
A33.aaTrxDimID,
A33.aaTrxCodeID,
A3.jrnentry,
A32.aaGLDistID,
G2.TRXDATE,
A3.GLPOSTDT,
A3.aaTRXType,
A31.ACTINDX,
A32.DEBITAMT,
A32.CRDTAMNT,
(A32.DEBITAMT - A32.CRDTAMNT) AS Amount
into #Tmp_EXT_AATransactions
From dbo.AAG30000 A3
Inner Join dbo.AAG30001 A31
On A3.aaGLHdrID = A31.aaGLHdrID
Inner Join dbo.AAG30002 A32
On A31.aaGLHdrID = A32.aaGLHdrID
And A31.aaGLDistID = A32.aaGLDistID
Right Outer Join dbo.AAG30003 A33
On A32.aaGLHdrID = A33.aaGLHdrID
And A32.aaGLDistID = A33.aaGLDistID
And A32.aaGLAssignID = A33.aaGLAssignID
Inner Join dbo.GL20000 G2
On A3.jrnentry = G2.jrnentry
And A31.ACTINDX = G2.ACTINDX
And A31.SEQNUMBR = G2.SEQNUMBR
--Where A3.jrnentry in ( '54227','54222','54225')
Select [JrnEntry],
[aaGLDistId],
[TrxDate],
[GLPostDT],
[aaTrxType],
Isnull([1],0) as Dim1,
Isnull([2],0) as Dim2,
Isnull([3],0) as Dim3,
Isnull([4],0) as Dim4,
Isnull([5],0) as Dim5,
Isnull([6],0) as Dim6,
Isnull([7],0) as Dim7,
Isnull([8],0) as Dim8,
Isnull([9],0) as Dim9,
Isnull([10],0) as Dim10,
[ActIndx],
[DEBITAMT],
[CRDTAMNT],
[Amount]
into #Tmp_EXT_AATransactions_Final
From
(
Select [aaTrxDimID],
[aaTrxCodeID],
[aaGLDistID],
[JrnEntry],
[TrxDate],
[GLPostDT],
[aaTrxType],
[ACTINDX],
[DebitAmt],
[CRDTAMNT],
[Amount],
Row_Number() Over (Partition By [aaTrxDimID],[aaGLDistID],[JrnEntry] Order By [aaTrxDimID],[aaGLDistID],[JrnEntry]) RowId
From #Tmp_EXT_AATransactions
) as Data
Pivot
(
Max([aaTrxCodeID]) For [aaTrxDimID] in ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10])
) As PVT
Select *
From #Tmp_EXT_AATransactions_Final
I can parse and preview it successfully in OLE DB Source Editor but i can't see any columns in columns mapping. So when i click on Build Query in OLE DB Source Editor i get this error message. Also Its working fine in Management Studio so don't know what's the problem.
Regards,
Vivek
View 3 Replies
View Related
Jul 15, 2007
I'm using VS 2005, and I built a website with a TableAdapter method using the wizard.I hand wrote a line of code: 1 WITH srtAS
2 (
3 SELECT *,
4 ROW_NUMBER() OVER (ORDER BY date DESC) AS 'RowNumber'
5 FROM table1
6 )
7 SELECT *
8 FROM srt
9 WHERE RowNumber BETWEEN @start AND @end; I didn't find any syntax errors, but the Wizard keeps alerting "the over sql construct or statement is not supported." From my research, I found that it's caused by the Wizard that doesnt support some syntax. Afterall, the problem is:1. I have two parameters @start AND @end. normally if there is no "syntax error", then it will show in the TableAdapter: GetData(@Start,@end). But now since there is this "Syntax error", I won't load these two parameters.2. I saw some solutions to this "syntax error" problem, and they suggested to write query manually, don't use wizard. But I don't know how. thanks in advance-noPC-
View 4 Replies
View Related
Jun 28, 2000
CASE is not supported Error in a View
In SQL 7, when a view parses the below code, it generates a 'CASE is not Supported' error'; however, it will still generate and show the field with the CASE statements correctly; What might cause this error?
(Other useful info: this code is from a converted SQL 6.5 DB and the SQL 7 is running in compatibility mode, i inserted '' to remove concantenation of NULL problems;)
Example of display:
10132 Hampton, VA: A. Deepak Publishing
SELECT PublisherID, Info = CASE WHEN City IS NOT NULL
THEN City + CASE WHEN State IS NOT NULL
THEN ', ' + State ELSE '' END + ': ' ELSE ''
END + Publisher
FROM tblLibraryPublishers
Thank you!
Llyal
View 2 Replies
View Related
Aug 1, 2001
I learned that SQL2000 Standard Edition can only support up to 2GB RAM, we have a WIN2K system on a server with 4CPU, 4GB RAM,
if we run SQL2000 Stanard Edition on it, will the 2 extra 2GB of RAM be wasted ?
Since there is a big diff. between licensing cost of SQL Standard and Enterprise, that's why the user choose Std. edition.
Any opinion or comment...
View 1 Replies
View Related
Mar 28, 2007
I have a strange issue on my local test environment (Win XP Pro SP 2 - SQL server 2000 with SP4 and IIS 5.1 ), where I get an error in the Select statement if I do not include the database owner prefix, like "select * from patients where PID< 200".
If I change it to "Select * from hprs.patients where PID<200" it works fine.
However, in more complex SQL, where I have joins, and sub queries, I still get errors on my local test machine, but the live server works fine.
I use the calls in classic ASP pages on a web site and I did not get this before, only after I re-instaled SQL Server 2000 to fix another issue I had on my machine.
On the live server (also SQL Server 2000) I do not get the error.
Is there a setting I can change on my local dvelopment environment so that it is not a requirement to include the DB owner in the SQL?
Any help with this will certainly save me a lot of re writing tons of SQL so I can still test before publishing.
Thanks - Hans
View 2 Replies
View Related
Aug 30, 2006
Is anyone know about waht type of table or database name
that not supported or will have error during execution of SQL statement
in SQL or MS Access database. For my, I know only two ,
i.) cannot put table name that same as the the database name
ii.) cannot put database name like "RETURN", "POSITION",etc.
Is there any reference site that show out a list of table about the
table or database name ??? Thank You ... :)
View 5 Replies
View Related
