BULK INSERT Inserts 2 Rows
May 15, 2008
Greetings
Got bulk insert thing going real nice thanks to your feedback! But now I notice that the BULK INSERT creates 2 identical rows while the flat file has the column headers and then corresponding row, just one row.
Why would it do that. Interestingly if the data file and format file are residing on a shared folder on SQL 2005, and I ran the BULK INSERT from studio it only inserts one row. But when I do BULK INSERT via user interface it creates 2 rows. What is going here.
View 10 Replies
ADVERTISEMENT
Dec 6, 2007
Hi Guys,
My little bulk insert is only bringing every second row of a CSV file. this is not good as i need every row.
My SQLcommand is thus.
InsertCommand="BULK INSERT TBL_Unitel_services FROM 'C:/webroot/servicedesk/csvs_Services/csv.csv' WITH (FIRSTROW = 1, FIELDTERMINATOR = ',', ROWTERMINATOR = '', MAXERRORS = 0) "
View 2 Replies
View Related
Aug 7, 2006
Hello
Iam using:
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38
Copyright (c) 1988-2003 Microsoft Corporation
Desktop Engine on Windows NT 5.1 (Build 2600: Service Pack 2)
I am using BULK INSERT to import some pipe-delimited flat files into a database.
I am firstly converting the file using VB.NET, to ensure each line of the file has a carriage return (by using streamwriter.writeline), and I am also ensuring there is no blank line at the end of the file (by using streamwriter.write).
Once I have done this, my BULK INSERT command appears to work OK. This is how I am using the statement:
BULK INSERT
tempHISTORY
FROM 'C:TEMPHISTORY.TXT'
WITH
(
FIRSTROW = 2,
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)
NB: The first row in the file is a header row.
This appears to work OK, however, I have found that certain files seem to miss the final line of the file! I have analysed these files incase they have an inconsistant number of columns but they don't.
I have also found that if I knock off the last column of the tempHISTORY table, the correct number of rows are imported. However, of course, I can't just discard one of the columns from the file, I need to import the entire file.
I cannot understand why BULK INSERT is choosing to miss the final line in the file, when the schema of the destination table matches the structure of the file.
View 2 Replies
View Related
May 15, 2015
I have a file which has some wind data that i am trying to import into a sql data base through bulk insert. if the script works as it supposed i should see 144 rows impacted but i see 0 rows affected.Â
BULK INSERT TOWER.RAWINTERFACE_1058 FROM 'C:Temp900020150427583.txt'Â
WITH(CHECK_CONSTRAINTS,CODEPAGE='RAW',DATAFILETYPE='char',FIELDTERMINATOR=' ',ROWTERMINATOR='
',FIRSTROW=172)
The code works if the file is large but if its small 0 rows are affected. and also if i remove the header rows then the file works again. want to understand what is going on here. i am including the screen shot of the file in notepad++. I have tried changing the row terminator to ' ' , ' ' and also tried to change the codepage but nothing seems to work. No error file is being generated either, if i give a error file option.Â
View 7 Replies
View Related
Jul 13, 2006
I have a stored procedure which will run automatically. I've got try...catch code in the procedure, but I found a bug with the code where if there are any import errors, it doesn't recognize that that there was an error and it runs through the try code as through there was no problems. (I reported the bug).
I added some code using @@rowcount to check if there were rows imported, and if not, it moves the data file to a error folder so I know there was a problem with the import. But this only checks if at least one row was imported, not if all the rows in the datafile have been imported. (i.e. if the first row imported correctly, and the second did not, it still sees it as successful).
The problem is some of the data files have only one row to import and some have multiple rows. Is there a way to count the number of rows in the datafile, then count the number of rows imported, to verify they are the same number imported?
Thanks,
Laura
View 2 Replies
View Related
Jul 13, 2006
I have a stored procedure which will run automatically. I've got try...catch code in the procedure, but I found a bug with the code where if there are any import errors, it doesn't recognize that that there was an error and it runs through the try code as through there was no problems. (I reported the bug).
I added some code using @@rowcount to check if there were rows imported, and if not, it moves the data file to a error folder so I know there was a problem with the import. But this only checks if at least one row was imported, not if all the rows in the datafile have been imported. (i.e. if the first row imported correctly, and the second did not, it still sees it as successful).
The problem is some of the data files have only one row to import and some have multiple rows. Is there a way to count the number of rows in the datafile, then count the number of rows imported, to verify they are the same number imported?
Thanks,
Laura
View 6 Replies
View Related
Aug 7, 2015
I am trying to BULK INSERT csv files using a stored procedure in SQL SERVER 2008R2 SP3. Although the files contain several thousand lines and BULK INSERT returns no errors, no data is actually imported into the table. Every field in the table is a NVARCHAR(50) datatype.
Here is the code for the operation (only the parameters for the insert itself):
set @open = 'bulk insert [DWHStaging].[dbo].[Abverkaufsquote] from '''
set @path = 'G:DataStagingDWHStagingSourceAbverkaufsquote'
set @params = ''' with (firstrow = 2
, datafiletype = ''widechar''
, fieldterminator = '';''
, rowterminator = ''
''
, codepage = ''1252''
, keepnulls);'
The csv file originates from a DB2 database. Using exactly the same code base I can import several other types of CSV files without problem.
The files are stored on the local server with as UCS2 Little Endian and one difference is that the files that do not import do not include a BOM. The other difference is that the failed files are non-UNICODE files.
View 4 Replies
View Related
May 21, 2007
Does sql server have a way to handle errors in a sproc which would allowone to insert rows, ignoring rows which would create a duplicate keyviolation? I know if one loops one can handle the error on a row by rowbasis. But is there a way to skip the loop and do it as a bulk insert?It's easy to do in Access, but I'm curious to know if SQL Server propercan handle like this. I am guessing that a looping operation would beslower to execute?
View 2 Replies
View Related
Feb 3, 2010
we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008.Â
We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns. The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
Â
Is there any proper way to load this kind of files into the db table?Â
View 6 Replies
View Related
Mar 3, 2006
I'm trying to perform a bulk insert as shown below. It's problematic b/c it's not updating the identity fields correctly and we're getting dups. I think, but I'm not sure, that On Update Cascade would solve all this, b/c we wouldn't have to concern ourselves with even touching the identity fields, b/c they would be autogenerated. Can someone shed some light?? I'm pretty confused.
CREATE PROCEDURE AddMiamirecords AS
BEGIN TRANSACTION
--USERS
INSERT INTO [Undex_Production].[dbo].[USERS]([LastName], [UserName], [EmailAddress], [Address1], [WorkPhone], [Company], [CompanyWebsite], [pword], [IsAdmin], [IsRestricted],[AdvertiserAccountID])
SELECT dbo.fn_ReplaceTags (convert (varchar (8000),Advertisername)), [AdvertiserEmail], [AdvertiserEmail],[AdvertiserAddress], [AdvertiserPhone], [AdvertiserCompany], [AdvertiserURL], [AccountNumber],'3',0, [AccountNumber]
FROM Miami
WHERE not exists (select * from users Where users.Username = miami.AdvertiserEmail)
AND validAD=1
--PROPERTY
INSERT INTO [Undex_Production].[dbo].[Property]([ListDate],[CommunityName],[TowerName],[PhaseName],[Unit], [Address1], [City], [State], [Zip],[IsActive],[AdPrintId])
SELECT [FirstInsertDate],[PropertyBuilding],[PropertyStreetAddress],PropertyCity + ' ' + PropertyState + ' ' + PropertyZipCode as PhaseName,[PropertyUnitNumber],[PropertyStreetAddress],[PropertyCity], [PropertyState], [PropertyZipCode],'0',[AdPrintId]
FROM [Undex_Production].[dbo].[miami]
WHERE miami.AdvertiserEmail IS NOT NULL
AND validAD=1
--ITEM
INSERT INTO [Undex_Production].[dbo].[ITEM] ([SellerID],[Price],[StartDate],[EndDate], [HomePageFeatured],[Classified],[IsClosed])
SELECT USERS.UserID, miami.PropertyPrice, convert(datetime,miami.FirstInsertDate), dateadd(day, 30, miami.FirstInsertDate)as EndDate, 1, convert (int,AdNumber) as Classified, 0
FROM USERS RIGHT OUTER JOIN
miami ON USERS.UserName = miami.AdvertiserEmail
WHERE validAD=1
--PROPERTYITEM
INSERT INTO [Undex_Production].[dbo].[propertyItem]( [propertyId], [ItemId])
SELECT Property.propertyId, ITEM.ItemID
FROM ITEM RIGHT OUTER JOIN
miami ON ITEM.StartDate = miami.FirstInsertDate AND ITEM.Price = miami.PropertyPrice AND ITEM.Classified = convert(int,miami.AdNumber) LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--CONDOFEATURES
INSERT INTO [Undex_Production].[dbo].[CondoFeatures](PropertyId,[Bedrooms], [Area], [PropertyDescription], [Bathrooms], [NumOfFloors])
SELECT Property.propertyId, [PropertyBedrooms], [PropertySquareFeet], dbo.fn_ReplaceTags (convert (varchar (8000),PropertyDescription)),
[PropertyBathrooms], [PropertyTotalFloors]
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--COMMUNITY FEATURES
INSERT INTO [Undex_Production].[dbo].[CommunityFeatures](PropertyId,[totalFloors],isComplete1)
SELECT Property.propertyId, miami.propertyTotalFloors,'0' as IsComplete
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--UNITDISCLOSURES
INSERT INTO [Undex_Production].[dbo].[UnitDisclosures]([propertyId],[monthcondoasso])
SELECT Property.propertyId, [propertyassocfee]
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
--BROKERDEVELOPER
INSERT INTO [Undex_Production].[dbo].[BrokerDeveloper]([IsFSBO],[FSBOName],
[FSBOEmail],[FSBOWebsite],[IsDeveloper],[DeveloperName],[DeveloperWebsite],[IsBroker],[BrokerName],[BrokerageWebsite],
[propertyId],[brokercommission],[isComplete])SELECT
CASE AdvertiserType when 'FSBO' THEN 1 else 0 end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserEmail] else NULL end,
CASE AdvertiserType when 'FSBO' THEN [AdvertiserURL] else NULL end,
CASE AdvertiserType when 'Developer' THEN 1 else 0 end,
CASE AdvertiserType when 'Developer' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'Developer' THEN [AdvertiserURL] else NULL end,
CASE AdvertiserType when 'Realtor' THEN 1 when 'Broker' THEN 1 else 0 end,
CASE AdvertiserType when 'Realtor' THEN [AdvertiserName] when 'Broker' THEN [AdvertiserName] else NULL end,
CASE AdvertiserType when 'Realtor' THEN [AdvertiserURL] when 'Broker' THEN [AdvertiserName] else NULL end,
Property.propertyId,[PropertyCommBroker],'0' as IsComplete
FROM miami LEFT OUTER JOIN
Property ON miami.PropertyUnitNumber = Property.Unit AND miami.PropertyZipCode = Property.Zip AND
miami.PropertyCity = Property.City AND miami.PropertyStreetAddress = Property.Address1
WHERE validAD=1
IF @@ERROR <> 0
BEGIN
ROLLBACK TRAN
RETURN
END
COMMIT TRANSACTION
GO
View 2 Replies
View Related
Apr 18, 2008
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
View 8 Replies
View Related
May 4, 2005
Hello All.
I am attempting an
insert into <tablename> select * from...
This is inserting thousands of rows into a table that has a trigger on it. The trigger updates a seperate table.
Now my question is will the trigger fire for every record inserted because I need it to fire only once as the table the trigger is updating is becoming locked when the insert statement is executed. I am assuming it is because of the number of times the trigger is being fired that the table is becoming locked. Any help would be greatly appreciated.
View 4 Replies
View Related
Sep 21, 2004
Hi folks,
I have a table located in DB2 nd I need to have a mirror image of this table on a SQL2000 database to avoid some server downtime problems.
Right now I have a solution using ADO.NET with Windows Services.
This windows service invokes itself everyday morning and pulls all the records from this table in DB2 to a dataset. Then I loop through the dataset and insert every record into SQL 2000 Table. This method is working fine ( It take approximately 2 minutes to insert 5000 records). I am just wondering whether there is any way to acheive bulk insertion in this case. Considering future growth of table I am not thinking the existing solution is neither elegant nor efficient.
Please let me know if I can achive the same either using XML, BULK INSERTS or any other mechanism in ADO.NET and please remeber that we are talking about data migration between different DBMS ( DB2 to SQL 2000)
Thanks,
Sai
View 1 Replies
View Related
Dec 9, 2014
We are noticing a lot of blocking when performing bulk inserts.
Sometimes the lead blocker(s) are blocking inserts into the same tables, but most of the time, it's insert to other tables. So, while bulk insert into table X is running, bulk insert into table Y is blocked from the insert into X.
- We turned off transactions from the application performing the bulk inserts - no change.
- We enabled table locking from the application - no change
- We enabled lock_on_bulk_load on the tables - this seems to have worked; however still see some blocking.
According to the lock_on_bulk article - When you specify table locking for a bulk import operation, a bulk update (BU) lock is taken on the table for the duration of the bulk-import operation, shouldn't we be seeing this BU lock? Instead, we see nothing but LCK_M_X (exclusive table locks).
Just found out that in order get a BU lock, no indexing can exist on the table ... sure be nice if that was in the article!
Also, we saw the exclusive locks happening before we made these changes, meaning it wasn't using the row locks that it should be by default. Assuming we're missing something here with lock escalation. I am profiling just for lock escalation, and it never happens ...
So I guess my pending question at this time is that why when inserting into table X do inserts into table Y get blocked?
View 3 Replies
View Related
Jun 16, 2015
I have a table with 370 million rows and 50+ columns. I need to change the data type of a column from character to numeric. Here's what it contains:
40 million with numbers I want to keep, the rest I just want to set to null:
4k with alpha characters
55 million other numbers
275 million empty strings
An alter column statement fails not just on the alpha characters but on the empty strings. So I tried a couple things on a test database to get an idea of the time it would take:
An update statement to clear out the non-numeric data is too slow (~1.5 days, batched 10000 at a time). I think I probably should create a new column anyway though, so I'm going to copy the data to a new table since it would be faster than adding a new column to the original table.
An insert ... select ... takes about 12 hours; adding WITH (TABLOCK) didn't seem to have any effect, and I'm not sure how to batch it. Recovery model is simple.
A select ... into ... only takes about 1 hour, but can't be batched.
Using a 3rd party ETL tool takes about 5 hours, batched.
I wanted to batch it to minimize impact on other queries but primarily the logs. Is there any way to do a fast batched bulk transfer within SSMS?
View 9 Replies
View Related
Jul 20, 2005
Hello all,I just started a new job this week and they complain about the length oftime it takes to load data into their data warehouse,which they do once a month.From what I can gather, they rebuild the indexes before the insert with an80% Fillfactor, then insert the data (with theindexes enabled), then rebuild the indexes with a 100% Fillfactor.Most of my RDBMS experience is with a different product. We would havedisabled the indexes and Foreign Keys, loaded the data, thenre-enabled them, moving any records that violated the constraints into anappropriate audit table to be checked after.Can someone share with me what the accepted "best practices" are for loadingdata efficiently into a data warehouse?Any thoughts would be deeply appreciated.Steve
View 2 Replies
View Related
Sep 24, 2007
I'm setting up a new 2005 server and bulk insert from a client workstation (using windows authentication) is failing with:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\FILESERVERNAMEsharedfolderfilename.txt" could not be opened. Operating system error code 5(Access is denied.).
Here's my BULK INSERT statement (though I'm pretty sure there's nothing wrong with it):
BULK INSERT #FIRSTROW FROM '\FILESERVERNAMEsharedfolderfilename.txt'
WITH (
DATAFILETYPE = 'char',
ROWTERMINATOR = '',
LASTROW = 1
)
If I run the same transact SQL when remote desktopped into the new server (under the same login as that used in the client workstation), it imports the file without errors.
If I use the sa client login from the client workstation (sql server authentication) the bulk insert succeeds.
My old SQL 2000 server lets me bulk insert the file without errors even from my client workstations using windows authentication.
I have followed the instructions on this site: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=928173&SiteID=1
, but still no luck and same error.
I'm pretty sure it is being caused by the increased constraints on bulk insert in 2005. Hoping someone can help. The more specific the better. If you need more info, let me know.
Oh and I've also made sure that the SQL service uses a domain logon account rather than the local system account.
Note that the file server (source file resides there) is a DIFFERENT machine than the 2005 SQL server. If I move the source file to the sql server machine the error goes away (not a preferred solution though).
Thanks!
View 9 Replies
View Related
Jan 24, 2007
Hi i followed Microsofts "Implementing Row-and-Cell-Level Security in Classified Databases Using SQL Server 2005"
this works fine when i insert delete data on a normal script (mangement studio)
my project runs in a SSIS package, different users. i cannot do a bulk insert using OLEDB data Destination i get the following error
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabelMarking". This may be caused by a conflicting hint specified for a view.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabelMarking". This may be caused by a conflicting hint specified for a view.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Conflicting locking hints are specified for table "dbo.tblUniqueLabel". This may be caused by a conflicting hint specified for a view.".
Error: 0xC0209029 at Data Flow Task, OLE DB Destination 1 [1741]: The "input "OLE DB Destination Input" (1754)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (1754)" specifies failure on error. An error occurred on the specified object of the specified component.
View 6 Replies
View Related
Nov 2, 2007
Does anyone know how to do a bulk insert using just the script task? I've been searching everyehere but can't seem to find a sample.
View 6 Replies
View Related
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Sep 27, 2007
I have to update a field within a table of 60 records or so. Each record has a different field value. it's type varchar. i was given an excel file with the field values and was thinking of a bulk update like bulk insert, but i don't recall that it's possible that way.
Is the only way to create a table, bulk insert, then merge the two tables together with UPDATE?
Just wanted to see if there was an easier way to do it, otherwise i'll take the latter route. Thanks!
View 1 Replies
View Related
Oct 11, 2000
I have a table containing 8 million records.
I need to replace 2 million of these records with
a scaled down query that goes something like:
SELECT 1, ShareholderID, Assets1
FROM MyTable (Yields appx. 200,000 recods)
SELECT 2, ShareholderID, Assets2
FROM MyTable (Yields appx. 200,000 recods)
.
.
.
SELECT 10, ShareholderID, Assets1 + Assest2 + Assets3 + ... + Assets9
FROM MyTable (Yields appx. 200,000 recods)
Updates and cursors just seem to be too slow.
So far I have done the following, but was wondering if anyone could think of a better way.
SELECT 6 million records that don't need to be deleted into a #TempTable
Use statements above to select into same #TempTable
DROP and recreate Original Table
SELECT 6 + 2 million records INTO original table.
This seems rather convoluted. Is there a better approach? Would it be worth while to dump data to a file and use bcp / Bulk Insert
Any comments are appreciated,
-Marc
View 3 Replies
View Related
Mar 18, 2007
I currently insert into one table with: SqlCommand comm = new SqlCommand("INSERT INTO UsersTable (UserName, Password, Email) VALUES (@person, @pass, @email)", sqlConnection); comm.Parameters.AddWithValue("@person", usrnmeLbl.Text); comm.Parameters.AddWithValue("@pass", hiddenpassLbl.Text); comm.Parameters.AddWithValue("@email", hemailLbl.Text);but I realized that there's another table related to this table and I need to have something go in it so that the users data will be recorded at the same pace. So I tried: SqlCommand comm = new SqlCommand("INSERT INTO UsersTable, FatherHistTable (UserName, Password, Email), (Father) VALUES (@person, @pass, @email), (@father)", sqlConnection); comm.Parameters.AddWithValue("@person", usrnmeLbl.Text); comm.Parameters.AddWithValue("@pass", hiddenpassLbl.Text); comm.Parameters.AddWithValue("@email", hemailLbl.Text); comm.Parameters.AddWithValue("@father", fthrsNmeLbl.Text);Not working, so I am thinking I must do two inserts: SqlCommand comm = new SqlCommand("INSERT INTO
UsersTable (UserName, Password, Email) VALUES (@person, @pass,
@email)", sqlConnection);
comm.Parameters.AddWithValue("@person", usrnmeLbl.Text);
comm.Parameters.AddWithValue("@pass", hiddenpassLbl.Text);
comm.Parameters.AddWithValue("@email", hemailLbl.Text); SqlCommand comm2 = new SqlCommand("INSERT INTO
FatherHistTable (Father) VALUES (@father)", sqlConnection);
comm2.Parameters.AddWithValue("@father", fthrsNmeLbl.Text); Is that the only way to go about it then? Thanks in advance for any explanations.
View 26 Replies
View Related
Apr 8, 2008
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
View 1 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Aug 22, 2006
Hi there,
I'm having a problem where the data taken from the textboxes is being inserted into a table twice. I looked online and someone on another forum was experiencing the same problem. His solution was making the "submitdsabledcontrols" attribute of the form false. That hasn't fixed the issue for me.
Below is my code. I'm still learning all this so this is just a test page, hence the wacky naming conventions.
When the button click calls Button1_Click, all it runs is "SqlDataSource1.Insert()"
Any ideas?
<%@ Page EnableEventValidation="false" Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="Default3.aspx.vb" Inherits="Default3" title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="mainContent" Runat="Server">
<form id="form1" submitdisabledcontrols=false>
<br />
<asp:Label ID="Label1" runat="server">Name</asp:Label>
<asp:TextBox ID="NameTextBox" runat="server"></asp:TextBox>
<br />
<br />
<asp:Label ID="Label2" runat="server" Text="Label">Number</asp:Label>
<asp:TextBox ID="NumberTextBox" runat="server"></asp:TextBox>
<br />
<br />
<asp:Label ID="Label3" runat="server" Text="Label">Salary</asp:Label>
<asp:TextBox ID="SalaryTextBox" runat="server"></asp:TextBox>
<asp:Button ID="Button1" runat="server" Text="Button" OnClick="Button1_click" />
</form>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:pubsConnectionString1 %>" DeleteCommand="DELETE FROM [Table1] WHERE [TableID] = @original_TableID" InsertCommand="INSERT INTO [Table1] ([Name], [Number], [Salary]) VALUES (@Name, @Number, @Salary)" OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [Table1]" UpdateCommand="UPDATE [Table1] SET [Name] = @Name, [Number] = @Number, [Salary] = @Salary WHERE [TableID] = @original_TableID">
<DeleteParameters>
<asp:Parameter Name="original_TableID" Type="Int32" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="Name" Type="String" />
<asp:Parameter Name="Number" Type="String" />
<asp:Parameter Name="Salary" Type="Decimal" />
<asp:Parameter Name="original_TableID" Type="Int32" />
</UpdateParameters>
<InsertParameters>
<asp:ControlParameter Name="Name" Type="String" ControlID="NameTextBox" />
<asp:ControlParameter Name="Number" Type="String" ControlID="NumberTextBox" />
<asp:ControlParameter Name="Salary" Type="decimal" ControlID="SalaryTextBox" />
</InsertParameters>
</asp:SqlDataSource>
</asp:Content>
View 1 Replies
View Related
Feb 1, 2007
Hi~,
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
- any other guide lines
View 1 Replies
View Related
Nov 14, 2007
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
View 6 Replies
View Related
Jul 25, 2005
m inserting some data in big-sized field
and small-sized fields, data of varchar type, int's, dateTime, and
others... i am using something called a stored procedure to add data
into a table.. now when i execute the stored procedure my data gets
truncated (although i made the sizes for my fields ridiculously big
like 1000 just in case) for example if i want to enter Jasmine it only
inserts 'J' in the field
I am sure there's something wrong in the stored procedure, and I am
guessing it's a problem of using single vs. double quotes and stuff
like that within my insert statement...
the following is my stored procedure:
CREATE procedure addLabor
@lName varchar,
@fName varchar,
@mName varchar,
@title varchar,
@craft varchar,
@lastFour varchar,
@SSN varchar,
@dateOfHire varchar,
@currentProj varchar,
@status tinyInt,
@project_id int,
@updateBy varchar,
@updateDate varchar,
@address varchar,
@email varchar,
@phone varchar,
@zip varchar,
@myfeedBack varchar,
@ethnicity varchar,
@userID int
as
BEGIN
SET NOCOUNT OFF
DECLARE @newid INT
insert into laborPersonal ( lName, fName, mName, title, craft,
lastFour, SSN, dateOfHire, currentProj, status, project_id,
updateBy,
updateDate, address, email, phone, zip, ethnicity)
VALUES
(@lName , @fName , @mName , @title , @craft , @lastFour , @SSN ,@dateOfHire , @currentProj ,
@status, @project_id , @UpdateBy, @UpdateDate , @address , @email , @phone , @zip , @ethnicity )
SELECT @newid = SCOPE_IDENTITY()
insert into feedBack
(lID, feedBack, userID, project_id)
values
(@newid ,+'
+@myfeedBack + ',
+@userID ,
@project_id )
SET NOCOUNT ON
END
GO
When i use 2 single quotes it insert the following string: "@lName" not the actual value of the variable @lName
my exec statement is this:
EXEC addLabor 'Razor', 'Nazor', 'mid', 'Mr', 'Carpenter Forman',
'1234',
'keOWVozC+wmBvaqgkVkZci5y4vFLdTKfZOVG4C6BSN6H2MBP6pdsIWA0SdPAlPJra0EjEj+uXI/kXSiBuwwnKQ==',
'6/27/2005 12:00:00 AM' , 'O.C. Public Library', 1, 3, '3', '7/25/2005
2:38:02 PM', '1233 Shady Canyon, Irvine', '', '', '12345',
'123-12-1234', 'African American', '3'
I appreciate any help or hints
thanks to all
View 1 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Nov 25, 2006
In case of a bulk insert, the “FOR INSERT� trigger fires for each recod or only once?
Thanks,
View 1 Replies
View Related
Apr 26, 2006
Hello,
I am wondering is the Transaction Log logged differently between BULK INSERT vs INSERT? Performance speaking, which operations is generally faster given the same amout of data inserted.
Sincerely,
-Lawrence
View 3 Replies
View Related
