BackUp My DataBase On MSSQLServer Express
Jan 26, 2007
Hello my friends!
I have designed a database on a SQLServer Express. When I am going to backup it, I provide a filename like as "c:/test.bak" but when executing I recieve a message that SQLServer cannot open the backup device with the name above.
View 1 Replies
ADVERTISEMENT
Jan 25, 2007
Dear friends I have a problem with the use of DELPHI and MSSQLServer!
I have installed in a PC a MSSQLServer Express. The PC is connected
with a other via a small network. I have developed an application in DELPHI
which runs also in the two computers. I have regulated SQLServer so as
to is accessible via TCP/IP, make that I tryed after in the other PC I
installed SQL Server Management Studio Express and had access in the
database via the network. While in the beginning both applications
worked normaly and were connected regularly in the base suddenly
one day they couldn't be connected giving as message the following
"DataBase Server Error: SQL State: 08001, SQL Error Code: 17 ", as there was no server. That is to say without I have teased the
properties the access to DataBase was impossible via the application but possible via the SQL
Server Management Studio Express and the environment of Borland Delphi
2005 from both PC's. That is to say
suddenly only the application simply could not be connected. I tryed
a lot of solutions but no one it did not work. When I installed the
MSSQLServer Express in the other PC the application could be connected
from this but no from the other via network always giving the same
message. Has anyone any idea why I am in impasse from solutions!!!!
Thak you in advance!
View 2 Replies
View Related
Mar 23, 2006
I am using Veritas backup exec 10.d with sql agent. I am able to see the sql express studio 2005 database files but there is difference in file size between original database file and the one shows in sql agent backup selection. The backup performs 100% successful but the original database file size is different e.g( original file:350MB, backup file: 28MB)..
Any ideas...?
Thanks in advance..
View 3 Replies
View Related
May 21, 2007
in Surface Area Configuration for Features.
What the problem is?
Thanks in advance.
View 12 Replies
View Related
Nov 1, 2006
Hello,
I have managed to create a backup of my SQL Express database by using the Transact-SQL from article http://support.microsoft.com/kb/241397.
I am not sure if it backed up the correct database, as in the script from the article, there is no where for me to specify my SQL Express database. The back up file that was created after I ran the script is, msdb.dat_bak.
Now if this is the correct database, how can I restore the data into my vb.net project that holds the SQL Express Database?
Thanks in advance.
View 1 Replies
View Related
Jun 19, 2006
I know there isn't a backup feature but I was wondering if there was a way to back up a database?
Thanks!!!
View 46 Replies
View Related
Mar 28, 2008
I have an application written with Visual Basic Express 2008, which has a Sql Server Express Compact database incorporated into the application. I've been trying to follow the suggestions listed on several threads on how to backup up my database and have not gotten very far. The following code seems to be in most threads.
Dim dbstring = "Data Source=.SQLExpress;Integrated Security=true;User Instance=true;AttachDBFilename=|DataDirectory|ImmuLogDataBase.sdf"
Dim sqlconn As New SqlClient.SqlConnection(dbstring)
sqlconn.Open()
When run, this code returns the following error at the sqlconn.Open() command.
An attempt to attach an auto-named database for file G:ImmuLogImmuLoginDebugImmuLogDataBase.sdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My solution is saved on a flash drive which I take between home and work. I'm hoping that that isn't the issue. I believe that Visual Basic loads the database when it starts and it is already open when this code is run. Is there a way to access this open database and run a backup procedure on it from within VB express 2008?
I'm new to this and self taught so explain everything in detail. Thanks for your help.
Bruce
View 3 Replies
View Related
Oct 13, 2006
Hi All,
Can somebody please help me, how to create database link to Oracle from MsSqlServer200.
Ex:
If I want to view data in both databases at a time then query would be like the following:
dblink name : SqltoOraclelink
table Name : EMP (this could be available in both the databases)
query in MsSqlServer200 EnterpriseManger:
select empname, empno from EMP msemp, emp@SqltoOracle oraemp where msemp.empname = oraemp.empname
Then this query results the rows from both the databases where empname is same in both the tables
My question is: How can I create this Database link "SqltoOraclelink" as I can do the same thing in Oracle.
As this is in urgency, it would be greate if somebody help us asap.
Thanks in Anticipation,
Regards,
RK
View 1 Replies
View Related
Jan 9, 2008
Hi all,
I just found out the name of AdventureWorksLT is in my SQL Server Server Management Studio Express, but the content of AdventureWorksLT database in my SQL Server Management Studio Express is gone. I saved the backup file of the AdventureWorksLT database in my C:Program filesMicrosoft SQL ServerMSSQL.1MSSQLackup folder. How can I backup the AdventureWorksLT database to SQL Server Management Studio Express again? Please help and advise.
Thanks in advance,
Scott Chang
View 1 Replies
View Related
Mar 3, 2008
I come cross some post about how to backup a database in Sql Server Management Studio Express automatically. The scripts look like as below
USE [master]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_BackupDatabase]
@databaseName sysname
AS
BEGIN
SET NOCOUNT ON;
DECLARE @sqlCommand NVARCHAR(1000)
DECLARE @dateTime NVARCHAR(20)
SELECT @dateTime = REPLACE(CONVERT(VARCHAR, GETDATE(),111),'/','') +
REPLACE(CONVERT(VARCHAR, GETDATE(),108),':','')
SET @sqlCommand = 'BACKUP DATABASE ' + @databaseName +
' TO DISK = ''C:Backup' + @databaseName + '_Full_' + @dateTime + '.BAK'''
EXECUTE sp_executesql @sqlCommand
END
It throws that the DDL statement is not allowed. What's wrong with it?
View 5 Replies
View Related
Jul 30, 2015
I would like to auto daily back up for all databases on a SQL Server Express 2014, and keep back up of last 30 days.
View 3 Replies
View Related
Mar 18, 2007
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
Error Code: -2146885628
Windows Error Text: Cannot find object or property.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqls::Service::Start
Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server All rights reserved.
2007-03-18 19:46:11.53 Server Server process ID is 796.
2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server Registry startup parameters:
2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s Service Broker manager has started.
2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Any advice???
View 14 Replies
View Related
Jul 21, 2007
hi
i have a database file backup which is having no extension (eg saims) . Can i create a database using this backup in sql server expression edition.
Or else is there any way to get the .mdf file from sql server 2005 full edition??????????????
Thanx in advance
View 2 Replies
View Related
Jun 8, 2008
The operation system is windows xp, and before i installed the SQL SERVER2005 the SQL SERVER2000 had installed.
the course of installing the SQL SERVER2005 has no error at all.
but i can not find the Database Engine under MSSQLSERVER from surface area configuration
==============
thank you in advance for any help
View 2 Replies
View Related
Apr 2, 2008
hi experts,
acutually i had configured the online application in my local pc..when i try to configure the database , it seems to be a vc++ intellisense database file(.ncb extension)..Actually i am working on ms sqlserver..i don't know how to open the vc++ database in mssqlserver...pls help me..
regards
senthil.d
View 1 Replies
View Related
May 7, 2008
Hello there,
I've some really big problems with SQL Server 2005 Express. I Recently, I had 2 instances on my machine, one was a SQL Server 2000 Developer and the other a 2005 Express Version. The 2000 version was not necessary anymore, so I unstalled it, since then, the Express version keeps having probems.
Under the Server Properties -> Database settings -> Database Locations I've changed the path to D:sqldatamssql, but now, the programm always takes the "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" to store and load the databases, no matter what I do.
And there are more problems see here:
Restoring does not work=======================
I wanted to restore a database called "fw40_admin" from a backup file (.bak), but that didn't work at all, it always says this as an error:
"System.Data.SqlClient.SqlError: The operating system returned the error '5(error not found)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'D:sqldatamssqlfw40_admin.mdf'. (Microsoft.SqlServer.Express.Smo)"
But as soon as I type in the installation path "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" inside the "Restore As" under "Options", it works.
Why does the backup only work in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData", BUT the database locations under the server properties is indicated with "D:sqldatamssql"????
Attaching does not work=======================
Attaching an existing database does not work either. Most databases (mdf) are located on the path D:sqldatamssql, but as soon as I press
Attach Databases -> Add
The dialog window appears with the "D:sqldatamssql" path, but it is unable to find any *.mdfs altough THERE ARE .mdfs in this directory. But Express can find databases in the selected installation: "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData".
Why can't Express see the directory on the D: partition???
What is wrong? Here? Can anybody help me?
View 5 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
Jul 15, 2015
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies
View Related
Nov 16, 2015
I have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies
View Related
Aug 4, 2007
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies
View Related
Apr 1, 2008
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
View 3 Replies
View Related
Oct 17, 2006
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
View 3 Replies
View Related
Dec 5, 2007
every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
View 4 Replies
View Related
Feb 10, 2006
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies
View Related
Nov 14, 2006
Hi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg
View 5 Replies
View Related
Nov 15, 2007
I am using sql server 2000 and windows server 2003 standard edition:
My database backup job is failing due to lack of disk space. I am taking the backup onto E drive and the
available free space on E drive is 6.85 GB and there are no other drives I can use for the database backups.
The size of mdf file is 21 GB and that of ldf file is 4.2 GB.
The transaction log back up job of that db ran fine.
This database recovery model is Full and
Auto shrink is not checked.
There is one primary filegroup for the database.
In this situation, I am thinking of the following option:
1. Backup the db and log files onto another network shared drive.
If I want to still use the same server E drive to backup the db and log files instead of using another network shared drives.
how can I do that.
Please let me know the best way of handling this issue.
Any help is greatly appreciated. Thanks!
View 1 Replies
View Related
Oct 14, 2007
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
View 16 Replies
View Related
Nov 15, 2007
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
View 1 Replies
View Related
Feb 15, 2007
I am running SQL Reporting Services and SQL Server 2005 on a Windows 2003 server. The configuration has been unchanged for approx. 3 weeks. Suddenly today, reports being accessed via an ASP.NET 2.0 application (on Windows 2003 Server with IIS 6) using a SOAP call to the reportserver became inaccessable. End users received the following error:
Message: An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
An error occurred during rendering of the report. --->
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at IFA.CAP.SQLReportingService.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) in C:ApplicationsIFACAPWeb ReferencesSQLReportingServiceReference.vb:line 1319
at IFA.CAP.BusinessObjects.Reports.Certificate(Int32 certificateID, Boolean isDraft, Boolean isCertified) in C:ApplicationsIFACAPBusinessObjectsIFA.CAP.BusinessObjects.Report.vb:line 551
at IFA.CAP.CertificateDetail.PrintCertificate(Object sender, EventArgs e) in C:ApplicationsIFACAPMainCertificateDetail.aspx.vb:line 2287
Subsequently, the following error is logged on the Report Server/Database server:
Report Server (MSSQLSERVER) cannot connect to the report server database.
I was able to temporarily correct the problem by performing as iisrest on the Report Server/Database server. However, the same problem occured again a couple hours later. I am relatively new to SQL Reporting Services so any help would be appreciated.
MDJ
View 1 Replies
View Related
Jul 28, 2006
I´m developing an application that uses SQL Server Express as the Back-End, i want to provide to the user an inteface where he can make backup of the database or restore a backup file, i really don´t know where i can begin with this task or what´s the best approach for doing stuff like this, i need some guidance here because we finish with the application and we are just adding some usefull features to the user.If somebody has any idea, i am willing to learn and listen carefully. thnaks to everybody.Thanks to everybody, Cesar
View 2 Replies
View Related
Dec 5, 2006
I have a working dnn site. I've created several modules and corresponding tables in the database and everything works great. Then, I open SQL Server Management Studio Express, attach to the database, backup the database, detach from the database and I can no longer run my site (error shown below which says I cannot login to db). I can open the database from Visual Studio and see my tables, but I cannot run the application. Rebooting doesn't help. I've even tried copying over the database with a prior copy. It still doesn't work. The only way I have found to reconnect to the database is to copy over the entire dotnetnuke install directory with a copy I made prior to the backup. Then it works again.
Anyone else had this behavior? How do I fix it?
Thanks
----------------- DB ERROR BELOW --------------------------------------
DotNetNuke Upgrade Error
The Assembly Version ( [ASSEMBLYVERSION] ) does not match the Database Version ( [DATABASEVERSION] ) ERROR: Could not connect to database.Cannot open user default database. Login failed. Login failed for user 'PARAPRO1ASPNET'.
View 1 Replies
View Related
Mar 2, 2007
Hi - I use the windows scheduler to execute an SP for my SQL Express instance on a server.
The SP loops through the SQL Express databases, and makes a backup - however, it will only backup the attached databases.
Is there anyway I can modify it, to make it backup the databases in my various web sites, within the app_data folder? These aren't attached, but I think get attached when the web application needs them, then detached afterwards - so they are never permanently attached!
Thanks for any help,
Mark
The SP I use us:/**
File Name: BackupExpress.sql
Description: Backs up all databases. This script is mainly meant for SQL Express instances
The script requires a C:ackups directory by default to backup to but can be changed with the @OutputPath variable.
Accompanying file is BackupExpress.cmd, which is used to schedule the script.
Author: Brian Knight
DateChange DescriptionAuthor
8/15/2006Initial releaseBrian Knight
**/
SET QUOTED_IDENTIFIER OFF
USE master
GO
SET NOCOUNT ON
DECLARE @dayofweek varchar(20)
SELECT
@dayofweek = CASE datepart(dw, getdate())
WHEN 1 THEN 'Sunday'
WHEN 2 THEN 'Monday'
WHEN 3 THEN 'Tuesday'
WHEN 4 THEN 'Wednesday'
WHEN 5 THEN 'Thursday'
WHEN 6 THEN 'Friday'
WHEN 7 THEN 'Saturday'
END
DECLARE @OutputPath varchar(500)
DECLARE @DatabaseBackupFile varchar(500)
DECLARE @FolderName varchar(25)
DECLARE @DatabaseName varchar(25)
DECLARE @strSQL varchar(2000)
DECLARE @hostname varchar(255)
SET @hostname = (select replace(convert(varchar(255),serverproperty('SERVERNAME')), '','_'))
SET @OutputPath = 'C:Backups'
DECLARE cur_Backup CURSOR FOR
select name from sysdatabases where name !='tempdb'
OPEN cur_Backup
-- Fetch the db names from Cursor
FETCH NEXT FROM cur_Backup INTO @DatabaseName
WHILE @@FETCH_STATUS = 0
BEGIN
SET @DatabaseBackupFile = @OutputPath + '' + @hostname + '-' + @DatabaseName + '-' + @dayofweek + '.bak'
PRINT ''
PRINT ''
print @DatabaseBackupFile
SET @strSQL = 'BACKUP DATABASE '+@DatabaseName+' TO DISK = "'+ @DatabaseBackupFile+ '" WITH RETAINDAYS = 7, NOFORMAT, INIT, NAME = N''Full Database Backup'', SKIP, NOREWIND, NOUNLOAD, STATS = 10'
PRINT @strSQL
PRINT ''
EXEC (@strSQL)
FETCH NEXT FROM cur_Backup INTO @DatabaseName
END
-- Distroy Cursor
CLOSE cur_Backup
DEALLOCATE cur_Backup
SET NOCOUNT OFF
View 2 Replies
View Related