Backup Database To Other Machine.
Feb 18, 2004Hi All,
Is it possible to backup a database exists on MACHINE A to on of the folder on MACHINE B through DATABASE MAINTAINCE PLAN WIZARD.
thanks..
Jes.
Hi All,
Is it possible to backup a database exists on MACHINE A to on of the folder on MACHINE B through DATABASE MAINTAINCE PLAN WIZARD.
thanks..
Jes.
I've a SQL server 2014 running on one of our server. We're in the process of implementing security steps for our databases. I've encrypted a column in one of the table in the database on the server. The issue is when I restore the backup on my local SQL server and run a query to decrypt the column data it gives me null values. On the other end when I decrypt the column data on the main server it works fine. I found a thread on this forum which states to do the following when restoring the encrypted database on different server.
USE [master];
GO
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'StrongPassword';
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY;
GO
select File_Name
, CONVERT(nvarchar,DECRYPTBYKEY(File_Name))
from [test].[dbo].[Orders_Customer]
I tried doing above still no luck.
Hi All;We are going to change our application server. We will copy all of ourDatabase from Mic 2000 Server OS to Mic 2003 Server OS. I found anarticle that how to move all the folders from same OS. My question isthat Would the 2003 OS be a problem when we copy all of the MC SQL 2000folders to New OS ? Has anybody done this before? Could you gimme yoursuggestions please?ThanksASA
View 1 Replies View Relatedi want to a backup a database on a different machine.Iam trying to give unc naming conventions i.e backup to //servername/sharename/file.bak but its not working.iam getting an error saying device error or device offline-access denied.
any suggestions plz!
thanks.
Hi all,
My first post on these forums and I'm hoping someone can please help me before I pull all of my hair out.
I'm currently working on the redevelopment of a website. The old one was written in ASP and we're going to totally redo the whole thing. As a lot of the content was dynamic I want to fire up the old site on my laptop to browse and pull content from. I have a backup of the entire website which I have put under a fresh IIS install. I also have a backup of the MSSQL database. I have restored this to the local machine and can view it using the SQL Server Management Studio. The problem is that I think I am having lots of trouble synching the users/permissions for it. We don't have a backup of the Master databases so I am stuck with what I can extract from the site backup and web code.
Trying to load the old index.asp I get either of these error messages quote:'Login failed for user 'Username'. The user is not associated with a trusted SQL Server connection' or 'SQL Server does not exist or access denied.' depending on how I've played with the user permissions.
Please can someone help me sort this out so that the old ASP webpages can access the DB again? I'm used to mySQL/PHP so am struggling a bit to get this going.
-Edit-
Bit more info. Here are the connection details the site uses within an ASP page.
<%
dim Conn
'---------------------Create connection------------------------------------------------------
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open "Driver={SQL Server};Server=MYSERVER;Database=dbTest;uid=dbTestUser;pwd=testpasssql"
%>
Cheers
PR
Hi all,
I have scheduled a backup on a remote machine. Everyday I FTP these backups from the remote machine to the local drive.
A local drive is maped to the remote machine in Windows NT Explorer but SQLSERVER7 Enterprise Manager can't see this drive so that I could do the backup to it.
Can any one please tell me how to make this work?
Thanks in advance.
Attaullah
Hi nice forum you have here.
Please point me to a link on this forum if I’ve missed something but I could not find an answer to this question yet.
I am new to sql and am looking at running random backups of an sql database. Regular backups are running nightly using maintenance jobs in enterprise manager. These random backups would be started at a point in time just before a specific procedure was run. There will be a user assigned the task of running these backups who has no privilege to log onto the sql server machine (nor will he ever get this privilege).
I would be interested to know if there is a way to script this so that this user could simply start a backup from his workstation. The backup could be a repeat of the scheduled nightly backup storing to the same place or a new backup. The db in question is only 150 +/- MB so time involved in completing this job is minimal (the scheduled backup of this db completes in under a minute).
System is SQL 2000 sp4 on a Win 2003 server with XPpro sp2 clients.
Thanks for any tips, hints or detailed descriptions.
Regards
HT
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Hi,
I need help finding a good back up solution for SQL Server 2005. I am hosting several databases in a shared environment and do not have admin rights to detach & copy & reattach the database file. I can have the hoster back up the file, but that is a manual process and I have had other issues with it in the past (access rights, cost, etc.). I have also tried creating a new business intelligence project, but have found it difficult to do a complete exact copy (while maintaining primary key values) as I run into many concurrency violations. This is especially true in databases that use the standard asp.net membership services tables.
Is there a way to get an exact duplicate of the structure & data of a sql server 2005 database without having to create a new Business Intelligence Project? Or is there an easy way to do this within BI that doesn't require a table-by-table setup? The primary purpose of this backup for me is for use on my development machine. Backup for data security/recovery is handled by the ISP.
Thanks in advance for your help!
Hi,
I am using an Enterprise Manager and i have created a Database Maintainance Plan, can anybody guide me as to how to create backup on a remote machine.
I also mapped that device(say M/c B) onto my server box(M/c A) but i am not able to see that particular location in my backup activity screen.
Can this be done in the first place ?
Regards,
Tahir
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
Any help would be greatly appreciated.My problem is that I need to set up a backup SQL Server 2000 machinewhich can be used in case of a failure to my primary. All databases(30 as of now) must be an up to the minute exact copy of productionand include most recent changes in data as well as any structurechanges (Tables, Views, SP's, Triggers, Users . . etc).When I tried this using Transactional Replication, the replicationprocess gets fouled up once I introduce any kind of structure changesto the DB. I've considered the idea of doing periodic backups andrestoring it to my backup SQL server, but this does not give me theconcurrency needed with 0 latency.I've seen articles that recommend using Transaction Replication with'Scheduled Table Refresh', and also doing database dumps to restore onthe backup machine, but I have not been able to find any documentationregarding this to try out. How can I implement this type of backupstrategy in SQL 2000?
View 2 Replies View RelatedWe take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedI have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies View RelatedHello Everyone
I want to install only the Reporting Service (and Analyzing Service) on a machine without any database (I will create a dedicated SQL Machine later on). Now, after the installation process I can see a SQL Server in my Installed Programs View. To me this looks like a complete SQL Server installation,but this is not what I wanted (I only checked the two services during the Setup). Or are those just some supoorting components?
Thanks
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies View RelatedI should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
Help!
I am using Script Transformation to output a new column as image[DT_IMAGE]
field to store serialized object. In the VB script, the sample code as
Row.serializedobject.AddBlobData ( binaryArrayReturnedFromC#dll )
The package always runs fine on my developing machine and will halt on other
machine at AddBlobData after certain number row records were processed. I am
stuck here. Anyone has any suggestion?
What I need is reading data from mutiple tables in one database and writing
into a single table in another datable. In order preserve all the columns
data, I use input column fields to construct a new object and then serialize
it, and store the serialize data into detination db table. (The object and
serialization function is coming from c# dll.)
Dim b As BusinessLicense = New BusinessLicense()
b.ApprovalDate = Row.approvaldate
b.BusinessId = Row.busid
b.BusinessName = Row.busname
b.NaicsCode = Row.naicscode
b.NaicsDescription = Row.naicsdescr
b.OwnerName = Row.ownername
b.Phone = Row.phone
b.Pkey = Row.pkey
b.RenewalDate = Row.renewaldate
b.StartDate = Row.startdate
b.Suite = Row.suite
Row.serializedobject.AddBlobData(Serializer.Serialize(b)) '''----This is blocking line
Row.infoType = BusinessLicense.TYPE
Both machine is xp with sp2. and standard SQL Server 2005 - 9.00.1399.06
Thanks!
Hi All,
I have enterprise version software CD1 and CD2 of SQL server 2005
when i try to run setup.exe..the following error pops -up
The image file Setup.exe is valid, but is for a machine type other than the current machine
MY OS version is windows 2003 32bit Operating system...
I am suspecting the binarie may be of 64bit.. How do we check the binaries are 32 bit and 64 bit software
Thanks for your Help
Mohan
Hi to everyone,
I'm facing a problem that drives me crazy. I've a web application that has the following problem. When I test the application on my developement machine all runs fine, but when I put into production server there is a problem in connection pooling. Look at the following image, the blue line is the number of connection in the pool and the violet line is the number of connection reclaimed. From the image it is clear that connection are returned on the pool only in block, maybe when the garbage collection pass and reclaim the object. The strange thing is that on my developement machine all is good, and also I'm using Enterprise Library and the connection are managed internally.- Thanks to everyone for any help.
Hullo all
I have two machines,
One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ?
running the procedure as a Domain user results in a failed job/stored proc.
also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ?
please e-mail me at wayde@sunnygrp.com if you have any thoughts...
What is the fastest way to get a copy of a SQL server database on a server to my local Windows XP Professional system?
View 4 Replies View RelatedI am using SQL Server 2005 Management studio. I already created a database including the table with stored procedure. Now, I want to copy all my database data, including the table and stor proc into my laptop. How I can do that? How I can save my database data in management studio into external drive (pen drive or external drive) then tranfer into my personal laptop?
Please help...
Thanks
I have a backup file in SQL Server 6.5 on machine A and wish to restore the database on another server on machine B but I cannot figure out how to do this...There is not enough room on one machine for both the database and the backup file and I cannot seem to be able to create a backup device on a different machine. ... ... HELP.
View 3 Replies View RelatedI'm a beginner user. I'd like to move the whole database from a work station to a server, how should I do it in a safe way? First of all, I have a very basic question: How could I save a database in SQL Server? Thanks in advance.
View 3 Replies View RelatedHi,
I have two servers, namely ServerA and ServerB. These two servers are on the same subnet. ServerB has a database called DatabaseB.
I'm logged in in ServerA and trying to pull data from DatabaseB.
This is the query I do when I'm logged in in ServerB (note im using Microsoft SQL Server Management Studio):
USE DatabaseB
SELECT distinct b.Subject
FROM dbo.F_Class_Exam a
LEFT OUTER JOIN dbo.D_Course_Catalog b
ON a.Course_ID = b.Course_ID
WHERE a.Term = '2071' AND a.Class_Exam_Type = 'FIN' AND b.Term = '2071'
ORDER BY b.Subject
How would I do this same query on ServerA? Ideas? Thoughts?
Thanks,
Mikhial
machine A and B in the same network.
A has dbs A1, A2,A3...
B has dbs B1 B2 B3....
I conect to B first using sql query analyzer. how I can access A1 in A?
Thanks.
Jeff
How would I copy an entire database to another (using a differentname, of course) on the same server? I am new with working withdatabases, so any help would be appreciated. Thanks.
View 3 Replies View RelatedIm guessing this is the right forum for this question:
I have a database on a WS2003 box running on MSDE 2000. Were trialling SQL 2005 (currently running on Win XP pro) so what i would like to do is to "copy" the database from the WS2003 box to the XP SQL box. So we can evaluate the database and see what SQL does/doesnt do.
1. How can this be done please?
2. Will it do anything to the original database?
3. Can this be scheduled to be done everyday? if yes how please?
Thank you in advance.
Hi,
here goes the question:
i have 1 sqlserver 2k5 machine (machine A) and sqlserver 2k (machine b)
how do i build a query to select data from 2k machine in a query of 2k5?
i mean something like
select *
from login:passw@machineb.dabatase.dbo.customers
thanks!
Hi,
here goes the question:
i have 1 sqlserver 2k5 machine (machine A) and sqlserver 2k (machine b)
how do i build a query to select data from 2k machine in a query of 2k5?
i mean something like
select *
from loginassw@machineb.dabatase.dbo.customers
thanks!
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies View Related