I'm the developper of a web application that uses in production environment a SQL Server 2000 db engine.
My devel. environment uses a MSDE.
In order to debug some strange problems, I need to backup the production environment and restore it in MSDE.
The environments doesn't have network connectivity between them.
Somebody can suggest any workaround?
Many thanks!
Need to restore database,here's the scenario:
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
Hi all,
I am new to Sql server backup and restore.
I have an sql server database in my office and I have successfully copied the whole database to my pc at home. For this purpose I used complete database backup.
Now what I want to do is delete all the data from office database(this can be done manually also) and copy daily data to my pc at home.So that only one day data will reside in my office compuer.
I tried this with completed database backup/restore again. But the old data in my home pc got lost. And when I tried the same with differetial backup, it gave an error message lile "the restore process was not stared with NORECOVER or STAND BY option".
Please suggest me how can I do daily backup from office computer and restore the data to my home PC so that the daily data gets appended to the existing database in my home PC.
Thank you in advance.
I have SQL Server desktop installed on my laptop. I have a database onthese that i created. but when i try to back it up to disk, i have nochoices available to select either disk or tape. i still try to clickon the 'add' button to select a file and it fails.i checked the settings and have the sys admin permission level as it's astandalone on my laptop. any suggestions???tiawoody
View 1 Replies View RelatedHi there,I've been sent a backup file from a SQL Server 2000 DB and triedrestoring into a blank DB (with the same name) on my SQL Server 2K,only it errors, see below:(I've separated each line with a return, to make it more readable)2005-07-08 11:08:23.93 spid51 BackupIoRequest::WaitForIoCompletion:read failure on backup device 'C:file location to backup'. Operatingsystem error 87(The parameter is incorrect.).2005-07-08 11:08:23.94 spid51 Internal I/O request 0x03BDFCEC: Op:Read, pBuffer: 0x03BDF800, Size: 512, Position: 5136, UMS: Internal:0x103, InternalHigh: 0x0, Offset: 0x1410, OffsetHigh: 0x0, m_buf:0x03BDF800, m_len: 512, m_actualBytes: 0, m_errcode: 87, BackupFile:C:file location to backup2005-07-08 11:08:23.94 spid51 The backup data in 'C:file locationto backup' is incorrectly formatted. Backups cannot be appended, butexisting backup sets may still be usable.2005-07-08 11:08:23.94 spid51 Starting up database 'databizDB'.2005-07-08 11:08:24.02 spid51 Bypassing recovery for database'databizDB' because it is marked IN LOAD.2005-07-08 11:08:24.16 spid51 BackupMedium::ReportIoError: readfailure on backup device 'C:file location to backup'. Operating systemerror 87(The parameter is incorrect.).2005-07-08 11:08:24.16 spid51 Internal I/O request 0x42FC5530: Op:Read, pBuffer: 0x03980000, Size: 512, Position: 5648, UMS: Internal:0x103, InternalHigh: 0x0, Offset: 0x1610, OffsetHigh: 0x0, m_buf:0x03980000, m_len: 512, m_actualBytes: 0, m_errcode: 87, BackupFile:C:file location to backupIt may be something simple as I've never really got that involved withthis side of it before. Hopefully someone out there can shed some lighton it, please?This may be normal, but I had to backup the blank DB locally firstbefore it would let me select a file to restore, so I could change thelocation.Cheers,Rich.
View 4 Replies View RelatedI am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Hai friends.....
I am doing project in ASP.NET(vb) my backend is sql server 2000...in my PC..
I have another pc....where sql server 2000 is installed.....
i have nearly 50 tables...in sql server 2000. in my PC..
I want to backup these tables from my pc and another pc...
can u tell me the steps...
I will try immediately....
Ambrose......
I want to backup an SQL Server database through a client application written in VB 6.0, and not through the Enterprize Manager.
I use the SQLDMO Objects Library to backup the database to the SQL Server machine through my application,
but there are the following problems:
a. The backup can be done only locally to the SQL Server machine. Is there any way to bypass this restriction?
b. To get the Directories Structure of this machine i use the xp_FixedDrives, xp_Subdirs stored procedures.
That's ok for the Backup operation but i do not have a way to view the FILES to perform Restore operation.
Of cource VB function Dir() cannot be used to view files on the server because of access restrictions.
Is there any workaround for that?
Hello!
I have a bug in SQL Server 2000 that I would like to discuss.
The bug is described briefly on http://support.microsoft.com/kb/821334.
"The potential for inconsistency in the backup history tables backupset and backupmediafamily is resolved. This issue may cause the restore process to point to the wrong backup files."
According to my experiences the bug is extremely serious. SQL Server backup and restore operations are not fully reliable. If you have a disaster situation there is a possibility that you can not perform a restore.
Technically a media_family_id is generated in a backup operation and inserted into msdb.dbo.backupmediafamily. What could happen is that a media_family_id, that already exists in backupmediafamily, is generated.
The bug is fixed from version 8.00.0859, but only if you have an special undocumented trace flag (3003) enabled.
Here is the information that I have got from Microsoft about this trace flag.
"Trace flag 3003 changes how SQL generates media_set_id for new backup files. It will guarantee that new media_set_id values in backupset table are unique when you create a new file with your backup. This is the only place in code where TF 3003 is used so it will not impact your SQL Server operations."
I have a SQL Server with 80 databases. I have a maintenance plan with full backup every 24 hours and log backup every 5 minutes.
The error happened on my server a few times every 24 hours. I believe it's a general problem.
Best regards
Ola Hallengren
Morning guys,
What is the equivalent to the taskpad on sql server 2005?
I want to be able to see when the last backup and restore was performed via transact sql ......
how would you go about that..... ?
what would I search... ?
I have TDE backup one serverA but There is no backup of certificates or keys from Server A. And no one knows the password used to create those backups. How do you restore the database XYZ at that time on Server B?
View 9 Replies View RelatedI have a .bak full database backup from a computer. Now I installed new SQL Server 2005 in another computer and would like to restore the .bak database here. How it can be done?
When I right click database and select restore database, it opens a window where it asks to put "destination for restore". This is a new SQL Server, how can I restore then?
Hello,
SQL Server 2005 TR with IU/QUS - Restore from a backup
Im trying to set-up the above using sp1. It all works fine until the final step, creating a subscription through sp_addarticle and Im getting the following error:
Msg 8152, Level 16, State 10, Procedure sp_MSget_synctran_commands, Line 198
String or binary data would be truncated.
This worked fine on my laptop with a small table with a couple of columns.Now Ive looked at this error and its like
select * from #art_commands
The table only has 49 columns in it, so its not huge.
What are my options for solving/getting around this problem:
1. Try and fix sp_MSget_synctran_commands, from memory, #art_commands has a nvarchar(max) column and Im wondering if this is related. must admit, havent really looked solidly at this sp yet.
2. SP2 doesnt look like it fixes this problem.
3. Create a bespoke method to replicate.
4. anymore for anymore?
It will be impossible to synchronize the databases so this restore from backup was my only option. Im a bit stuck now, can anyone help?
many thanks,
John P
I am trying to restore a DB from FULL backup onto a server (ServB) but that backup is located on a different server (ServA) within the same network. I know that using SSMS 2008, i cannot restore using file from a different server. Due to space restrictions, I cannot copy the bak file (on ServA) to the server where the DB will be restored (ServB). How to restore the FULL db using sql. Basically, the end result is to setup mirroring with the principal server. so i need to restore full and tlog backup
View 2 Replies View Related
Hi, Our Sharepoint of TFS was down a couple of days ago. By luck, we had fully backed up SQL database. Now, the problem is, I uninstalled everything and tried to move TFS to a new server machine on the domain. I installed freshly everything and tried to restore all the databases (with tables also). Now the problems are these:
1 - Since there are lots of different backup-restore procedures telling on the Internet from some forums and this forum also: What should i do basically to make the configuration of Sharepoint and Reporting Services to make them work correctly?
2 - Secondly, even if i fail in the problem above, I, at least, want to save the source control files and sharepoint files. Where can I find them and how can I take them back to my new TFS installation?
3 - If these problems exist and Suppose on a new project on the new installation, i create new WI's, documents (with new Version Control information), and new SPS configuration. And on a new release,the problems are resolved. Is there some way that I can merge the former Backup with the new installation's database?
Sorry if this is elementary, but I have searched and cannot find an answer.
I have a backup file of a sql server 2000 database. I want to restore it to a remote hosted sql server 2005.
Using sql server management studio, it seems to me that I cannot access the files stored local on my computer.
Does anybody have a solution?
What is the best way to deploy my backup file to the remote server?
Thanks for any suggestions!
Hello,
I have a user database which has 1 data file and 1 logfile.
I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by,
1. Create the database with the same name.
2. Restore the complete backup from the file device.
While doing so,
I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated.
If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Any suggestions welcome.
Thanks,
MMS
I need to restore a backup file which resites on a network share to my local Sql70 server. Is it possible to restore a database from a backup file on the network share? Thanks!
View 3 Replies View RelatedI am having issues with Restoring the Backup of same Database on to the same server , as i know like many of you will be asking y i need to restore on same server.. Well the need came in that way , now i think i know the problem (i.e) The Orginla DB is there and also i am restoring the same DB again on that server, so .mdf and .ldf will be same .
View 8 Replies View RelatedI have a backup that comes to me nightly in the format of XXXX_YY_MM_DD.bak where the date is incremented each night the previous night backup is deleted when the next days is added so in general . I have only one in that folder. I wanted to setup a restore to run nightly
RESTORE DATABASE [XXXData] FROM DISK = 'C:folderExtractedDataapp_XXX_backup_15_01_28.bak' --location of .bak file
WITH REPLACE
I would like to do something like
RESTORE DATABASE [XXXData] FROM DISK = 'C:folderExtractedDataapp_XXX_backup*.bak' --location of .bak file
WITH REPLACE
While I'm asking.. In case there is an older one left behind(which shouldn't happen) I saw something about "LATESTFULL" but think its a redgate command?
SQL Transaction replication, specifically SQL backup and restore Transaction replication. So Scenario,
S1 = Primary Server 1
R1 = T - Replication Server 1
R2 = T - Replication Server 2
So we have S1 replicating to R1, and we want to build another subscriber which is R2.
Can I take the Replicated Database from R1, backup it up, then restore it to R2, and create the publication/subscription?
Will that work? if not, is there an easier way to avoid the snapshot? the reason i ask this is because we do have replication snapshot, but takes long. One of my Colleagues stated he tried this, however replication made duplicate rows on R2, which is why he had to use replication snapshot.
Of course I'll try this before I go live, but I figured I'd askhere first. I've read the docs, and the answer is unclear.My current backup strategy is:Take a full database backup occasionally (like, every two weeks).Back up logs every five minutes.This works, but restoring the database all the way through cantake a while, as I've sometimes spun through 800+ log restores.I'd like to change toTake a full database backup occasionally (like, every two weeks).Take a differential backup every day.Back up logs every five minutes.So, I'd have this set of backups after day twoFULLLOGS 1-100DIFFERENTIALLOGS 101-200When I go to restore, do I always have to doFULLDIFFERENTIALLOGS 101-200or can I doFULLLOGS 1-100LOGS 101-200?I guess what I'm really asking is: is there any reason to keepthe "old" logs around (in this case 1-100), if I assume I alwayshave the latest differential?I suppose I *might* need them to do a "point in time" restore,i.e.FULLLOGS 1-53.but assuming I never want to do that, can I discard the logsthat are earlier than my latest differential?
View 1 Replies View RelatedAfter a manual backup, I attempted to restore, and got the following error:
System.Data.SqlClient.SqlError: The tail of the log for the database "MSC" has not been backed up. Use BACKUP LOG WITH NORECOVERY to backup the log if it contains work you do not want to lose. Use the WITH REPLACE or WITH STOPAT clause of the RESTORE statement to just overwrite the contents of the log. (Microsoft.SqlServer.Smo)
suggested link to Microsoft site had no articles. How can I fix?
I need to replicate database from one of LINKED server to another SQL instance on a different server. What will be a best way to achive this ? I'm using MS SQL server 2008 r2
- Should I just take a backup of my current database and restore it (Will this also cover up access to objects for different users, or do I need to write a separate script for it).
OR
-Should I go to TASK > generate scripts and create one... Here I believe I need to additionally take care of access rights, indexes, constraints.
after restoring a database and regenerating keys, I'm trying to queue messages, and they're all hanging out in sys.transmission_queue with the following message:
View 7 Replies View RelatedHi Friends,I have installed SQL server 2005 Express Edition and SQL Server managementI have a SQL server 2000 db backup file. I try create a new database in my SQL server 2005 express Edition and try restore that backup file from device, it only searching for file with *.bak and *.tm extension! I tried generate backup file with .bak extension and tried restore into SQl server 2005 express edition but still it is not allowing to do so! I also tried copy my database's data file and log file and paste it under SQL server 2005 express edition Data folder and still not able to read the tables.Is that any ways to do restoring for this SQL server 2000 backup file into SQL server 2005 express edition! Anybody can help me on this please...:eek:
View 2 Replies View RelatedHi everybody,
On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM).
However using Query Analyser of SQL Server I am able to restore the database.
What is the solution to this problem?
We use Netbackup for our SQL servers to backup and restore databases. I would like the service account used by Netbackup to have as limited permissions as possible. The account should be able to backup and restore a db without being able to read any of the content. Right now the account jobs fail if the service account is not in the sysadmin role.
I removed the account from sysadmin and limited it to dbcreator and public but the job fail.
How to setup an account so that people who know the service account password can't log in with that account and read db information?
I'm performing an upgrade of a DW Warehouse Server from SQL Server 2008 to another machine with SQL Server 2014.I know that you can perform the restore via the SSMS GUI but I want to script it out.URL....
View 4 Replies View RelatedHi,In case of a remastering of a client, I need to backup the EnterpriseManager configuration (the groups, the declared servers in thegroups), instead of registering all servers manually once again.Does anyone know how it could be done ?TYArjp
View 2 Replies View RelatedI am working on a project for an SQL job. I am:
1.) Taking a database out of an availability group,
2.) Setting the recovery to simple,
3.) Shrinking the log file,
4.) Setting the recovery mode back to full,
5.) Then backing it up.
I need to restore the file to my secondary server with replace and non recovery mode. I am having trouble performing that call? I have the code to reestablish the database to the availability group if I can get the restore feature working.
I am using sql server 2005 and unable to restore backup file(.bak) file when i ry to restore it to other database it shows following error
restore failed for server (microsoft.sqlserver.smo)
additional information:
system.data.sqlclient.sqlerror : the media set has 2 media families but only 1 are provided.All members nust be provided.(microsoft.sqlserver.smo)
I am new to DBA activities. I have a database name Sample_DB in SQL Server 2014.
This database has below files
LogicalName FileType
FileGroup
Sample_DB_Rows ROWS Data
PRIMARY
Sample_DB_C1 ROWS Data
Country1
Sample_DB_C2 ROWS Data
Country2
Sample_DB_Docs FILESTREAM Data
FileGroupForDoc
My database has 3 tables namely Tbl1, Tbl2 and Tbl3.
Tbl1 data stored in primary file group
Tbl2 is partitioned based on a key column CountryId and stored in respective filegroup
Tbl3 is enabled to store documents, files etc., and its data will be stored in filestream enabled filegroup.
Problem:
I need to take backup of each file group separately.
I need to restore the backed up file group separately. Is this possible, how to do it.