Backup SQL Using MSDE Writer
Jan 19, 2007How do I backup my SQL Databases using MSDE Writers?
I do not see MSDE Writers under NT Backup.
Thanks
Santhosh
How do I backup my SQL Databases using MSDE Writers?
I do not see MSDE Writers under NT Backup.
Thanks
Santhosh
Does anyone alot about microsoft report writer?
View 2 Replies View RelatedI have received the following error just yesterday and again today.
"SQL Writer" "Library Failed Installation".
It states I need to uninstall the program and reinstall it. I have never enountered this before. Help!
hi,
i've performed a test on 2 machines based on the topic above, but it doesn't seem like blocking each other... This is the context...
I've created a table call TEST_DEL i.e.
quote:CREATE TABLE test_del
(v_id INT,
desc CHAR(3)
)
In machine 1, i'm login as USER 1 and try to insert a set of records into the table
quote:
Machine 1
~~~~
BEGIN
DECLARE @li_num int,
@li_start int
SET @li_num = 100000
SET @li_start = 1
WHILE @li_start < @li_num
BEGIN
INSERT INTO test_del VALUES (@li_start, 'zzz', 'xxx')
IF (@li_start > @li_num)
BREAK
ELSE
SET @li_start = @li_start + 1
CONTINUE
END
END
In machine 2, i login in as USER 2 to retrieve the records at the same time...
quote:
SELECT * FROM test_del
but, the system still allow me to retrieve the records at the same time... May i know when will "Writer block reader, reader block writer" occur and in what situation
Thanks in advance
I'd like to grant this role to a domain user. But I don't see how.
tia
Hi There, Don't know if im in the right place but I couldn't quite find what I was looking for.
Anyway yesterday by mistake I started to uninstall/remove Microsoft SQL Server VSS Writer by mistake. I cancelled it quite quickly so it didn't completely uninstall, but now im getting this message when turning on my computer:
SQL Server
Your SQL Server installation is either corrupt or has been tampered with ( Could not open SQLEVN70.RLL). Please uninstall then re-run setup to correct this problem.
The other message I get is when I am turning off my computer this one says:
End Program - WDS _ SL
This program is not responding.
To return to Windows and check the status of the program click cancel.
If you choose to end the program now click end.
My guess is that both messages are relatated to the same problem.
Can someone help me solve this problem?
Hi all;
Is it possible to make a backup from MSDE ?? (Y/N)
The problem: I am going to develop an application for a small company and it don't like to spend more $$ rather than some $$ for the App.
So, I don't know if it is possible to do a backup from MSDE or not?
BTW: How much MS SQL Sever200 will cost per a PC? (any idea even approx.)??
Thanks in advanced!
~~CS4Ever~~
Hi all;
I am looking to add "Make Bakup" and "Make Restore" functionalty in my applicayion menu which uses MSDE for database.
My question is How to add these two functionalty (What is the source code)??
Thanks in advanced!
Hi,
we have about 12 databases in an MSDE server.
We can install the enterprise manager, but cant get the maintenance plans to work. (fields stay empty and setting dont get saved)
I've searched a bit, but couldn't fix it.
No problem, i created a job, with 12 T-SQL commands, and the backups are working perfect.
Now we wanne backup with a history (we take a backup every 4 hours of the day), because now they always get overwritten.
So im trying to change my transactSQL to create dynamic files.
The code i'm using right now :
BACKUP DATABASE PW0001A00 TO DISK = 'C:SQLBACKUPPW0001A00.BAK' WITH INIT, NOUNLOAD, NOSKIP, STATS=10, NOFORMAT
I've tried different things like
BACKUP DATABASE PW0001A00 TO DISK = 'C:SQLBACKUPPW0001A00' + DATEPART(month, GETDATE()) + '.BAK' WITH INIT, NOUNLOAD, NOSKIP, STATS=10, NOFORMAT
but nothing worked.
so basically I wanne be able to create dynamic filenames in the above command.
You got any ideas/solutions.
tnx.
Can anyone tell me how to backup an MSDE database and then restore it to a second server?
View 1 Replies View RelatedHi.I am trying to automatically backup transaction log when error 9002happened. So i have created appropriate job and alert to catch this error.I have two instances of sql server under Windows 2000. One of them is fullSQL Server, another is msde.When transaction log is full in full SQL Server error 9002 severity 17state 2 is logged in sql server log and in Windows Application log. Myalert firing my job. All is fine.But when transaction log is full in MSDE error 9002 severity 17 state 6 islogged only in sql server log. It is not logged into Windows Applicationlog so my alert does not work.So here is my questions:1. Why MSDE does not log error into Windows Application log?2. Why error 9002 has severity 19 in sysmessages table but is generatedwith severity 17?3. Why state of error 9002 differs under sql server and msde?Thank you.--Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
View 5 Replies View Related
Hi everyone!
We are trying to restore a database backup created o MSDE 2000 server to SQL Express 2005.
The collation settings of both SQL Express and MSDE are the same: Turkish_CI_AS
The problem is that the log of restore operation has some warnings like:
Processed 344 pages for database 'MYDB', file 'MYDB_Data' on file 1.
Processed 1 pages for database 'MYDB', file 'MYDB_Log' on file 1.
Converting database 'MYDB' from version 539 to the current version 611.
Database 'MYDB' running the upgrade step from version 539 to version 551.
Warning: The index "myt_idx01" on "dbo"."myt" may be impacted by the
collation upgrade. Run DBCC CHECKTABLE.
Warning: The index "PK_BankLDef" on
"dbo"."BankLDef" may be impacted by the collation
upgrade. Run DBCC CHECKTABLE.
Warning: The index "AgreeHist_idx1" on
"dbo"."AgreeHist" may be impacted by the collation upgrade.
Run DBCC CHECKTABLE.
....
....
Database 'MYDB' running the upgrade step from version 551 to version 552.
Database 'MYDB' running the upgrade step from version 552 to version 553.
Database 'MYDB' running the upgrade step from version 553 to version 554.
Database 'MYDB' running the upgrade step from version 554 to version 589.
Database 'MYDB' running the upgrade step from version 589 to version 590.
Database 'MYDB' running the upgrade step from version 590 to version 593.
Database 'MYDB' running the upgrade step from version 593 to version 597.
Database 'MYDB' running the upgrade step from version 597 to version 604.
Database 'MYDB' running the upgrade step from version 604 to version 605.
Database 'MYDB' running the upgrade step from version 605 to version 606.
Database 'MYDB' running the upgrade step from version 606 to version 607.
Database 'MYDB' running the upgrade step from version 607 to version 608.
Database 'MYDB' running the upgrade step from version 608 to version 609.
Database 'MYDB' running the upgrade step from version 609 to version 610.
Database 'MYDB' running the upgrade step from version 610 to version 611.
RESTORE DATABASE successfully processed 345 pages in 0.420 seconds
(6.712 MB/sec).
What is the severity of this warnings? Is there a way to make them disappear?
Thanks in Advance.
Adnan
I just heard of the new report writer feature in SQL. Will it be available for use in the developer edition.
View 1 Replies View RelatedHi,
Can I use any existing MS report writer for Access database?
Thanks
Hi all! How can i backup databases which are running in my MSDE 2000 & then how can i restore them with all the data, Yes i know that their is no visual tool for doing this in MSDE but can we do it with scripts, if Yes then how
View 1 Replies View RelatedHi all;
I created a DB in MS SQL Server 2000.. (has Tables, SPs, Views..etc.) and I want to attached to a customer that has ONLY MSDE?
How?
Also, how can my customer make Backup & Restore from his MSDE? (BTW: can I do that in code (VB.NET/ASP.NET)??
Thanks in advanced!
I'm running a Scheduled Task to execute dbbackup.exe to backup a local MSDE Instance for Live Comm. Server. When I save it to the local drive it works fine but I'm trying to save the backup to a remote server. I can't seem to get it to work. The account being used has full access to the remote computer and backup folder share.
Syntax:
"C:program filesms lcs 2005serversupportdbbackup.exe" /backupfile:\servernameackupmsdebackup
but when I run the following it works fine:
"C:program filesms lcs 2005serversupportdbbackup.exe" /backupfile:c:ackupmsdebackp
Any ideas? Thanks for any help!!!
MSDE2000I have an application in which I am running a TSQL command of BACKUP DATABASE and RESTORE DATABASE for the backup and restore commands for my application. For testing purposes, i did the following:1) Ran a BACKUP DATABASE command to a file named C:TEST.BAK.2) Deleted the database completely.3) Ran a RESTORE DATABASE on the same file (note, I did NOT recreate the database)Now I have the database back with all my data. What are the gotchas when doing a backup and restore using this method? I am not relying on transaction logs to restore to a certain point, the user can only restore back to their last backup (may be daily, weekly or monthly)TIA-- Tim Morrison
View 3 Replies View RelatedHi,How to automate database backup (MSDE server v8.0)? Is some free toolwhich can help on this or can I use some stored procedure? Plan:Complete - 1 per weekDifferential - 1 per day--*Best regards,*Klaudiusz Bryja
View 3 Replies View Relatedplease help me, i need to know if i need to purchase a sql agent for veritas backup exec. i am using the sql msde version only, not the full scale version. any help would be great.
View 4 Replies View RelatedHello,
I'm not sure if it's the setup I did wrong, but I can't seem to get my
text datatype in my database to store more than 900 characters.
I'm trying to setup a news database for my website, which will populate
the information into a datagrid. To test, I manually added a news
item in the database through the visual studio 2003 gui. I
immediately noticed a problem as the I was getting an error after a
long news item saying:
"The value you entered is not consistent with the data type or length of the column, or over grid buffer limit."
I couldn't find anthing to set the buffer limit and the datatype is
"text" filled with simple text in the column. As a further test,
I
simply entered 12334567890123... up to 900 characters and still
recevied the error.
I would appreciate someone leading me in the right direction on this one.
Thanks a lot.
I am trying to change the computer name of a machine running MSDE but I get an error when SQL Server starts. With regular SQL when I change the name of a computer I re-run setup and setup fixes this problem. MSDE can only be installed from unattended mode so I can’t rerun setup and fix the problem.
My question is "How do I change the name of a computer running MSDE with out reinstalling MSDE"
We currently have the problem, that all our machines are produced with the
same name and afterwards the name is changed. So we have the problem that
the checksum key for the MSDE isn't valid anymore. As MSDE can only be installed
from unattended mode so I can’t rerun setup and fix the problem. Does anyone
know a solution for this problem ?? A program recalculating the cheksum ??
regards,
Manfred
I'm not sure if this is the correct forum for this this question but I'll give it a shot.
The only db development that I have ever done is in MS Access. I have a project at work that is being accomplished in VB and I need a db engine to use as the back end. Visual studio came with a copy of MSDE. Is this tool worth using or should I invest in mySQL? Are there any advantages to using MSDE over mySQL?
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
Using Ola Hallengren's scripts I do a full backup of a database on a Sunday. Then differential backups every 6 hours and log backups every hour. I would like to keep a full week of backups based off the full backup done on Sunday. Is there a way for me to clear out the diff and log folders after the successful full backup on Sunday nights?
View 2 Replies View RelatedNeed to restore database,here's the scenario:
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
Windows 2003 backup utility uses the shadow copy option that allows it to copy open files.
Therefore, can I use this utility to backup the .mdf and .ldf files for my SQL 2000 database?
I can then attach the .mdf files if I need to restore the database to another server.
Can anyone tell me if this is safe? I've tried it and it worked but I'm worried there maybe some lurking danger in using this approach.
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedI've written a custom script to delete backup files from location. But unable to modify now to count the number of files are deleted. How to modify the script...
/* Script to delete older than N days backup from a specific directory */
USE [db_admin]
GO
IF OBJECT_ID('usp_DeleteBackup', 'P') IS NOT NULL
DROP PROC usp_DeleteBackup
GO
[Code] .....