Backup Checking

Feb 25, 2004

Hello, everyone:

After backup is finished, how to check if the backup is successful, and it is same as the original database? Thanks.

ZYT

View 1 Replies


ADVERTISEMENT

Checking Backup File Questions

Jul 23, 2005

Hi All,I have several questions about checking backup file :a. When SQL Server receive a command :BACKUP DATABASE test to DISK = '\pc1etdbBTEST',does it verify BTEST file before ending the job ?b. Is there any special command for checking / verifyinga backup file ?c. If I send a restore command using a file infectedby a virus, what action will SQL Server take ?Thanks in advanceJohn S*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

BACKUP LOG Cannot Be Performed Because There Is No Current Database Backup. BACKUP LOG Is Terminating Abnormally.

Jan 31, 2008



Hi there

I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.

The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).


Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?

Thanks

Jane

View 3 Replies View Related

Checking For PK

Feb 10, 2004

Hi,

I want to assign a list columns to be the PK on a table. I don't know what this list of columns would be.How do I go about figuring that?

Sample Data

Col1...Col2...Col3..Col4
1...........2.......A......X
1...........2........B.....X
1...........2.......A......Y



As you can see Col1 & Col2 ONLY do not make up the PK. I need to include Col3 as well. My concern is I am not sure if I have a row like..
1...........2.......A......X reapeated lower down the order. So how do I figure the PK out?

Thanks

View 2 Replies View Related

Checking For Row Existence

Nov 1, 2006

Can someone show me some C# code for detecting if a SQL row exists or not?  This seems like a very typical action and I cannot for the life of me find a tutorial online that explains this step.  In my code I'm either going to INSERT or UPDATE a record.  I tried sending a SELECT command through a ExecuteNonQuery, but only got -1 as a response.  Apparently ExecuteNonQuery does not work with SELECT.  I then saw that T-SQL has an EXISTS keyword, but I cannot see anyway to use that from within C#.So...can anyone share the typical code they use to identify if a row exists or not within a database.  I guess I was execting there to be some method available to do this sort of thing.

View 1 Replies View Related

Checking Value In 2 Tables.

Aug 3, 2007

i want to check a value in 2 tables. the 1st table i want to check if the value exists and from the 2ed table i samething.
i came up with this but when it's doing the second if i get error on the page.
Dim ReturnVal As Integer
Dim ReturnVal2 As IntegerDim conn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("imacstestConnectionString").ConnectionString)
Dim cmd As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [AppraisalSummaryBlue] WHERE ([ReportNumber] = @ReportNumber)", conn)
'To check if the # is registered.Dim cmd2 As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [t_RegisterInfoTemp] WHERE ([ReportNumber] = @ReportNumber)", conn)
cmd.Parameters.AddWithValue("@ReportNumber", txtReport.Text)cmd2.Parameters.AddWithValue("@ReportNumber", txtReport.Text)
conn.Open()
ReturnVal = Convert.ToInt32(cmd.ExecuteScalar())
conn.Close()
'This checks if the # is correct.
If ReturnVal > 0 Then
'This checks if its registered with someone else.
conn.Open()
ReturnVal2 = Convert.ToInt32(cmd2.ExecuteScalar())
conn.Close()
If ReturnVal2 <> 0 ThenServer.Transfer("regccinfo.aspx")
Else
lblError.Text = "the # is registered with someone else."
End If
Else
lblError.Text = "the # does not exists."
txtReport.Focus()
End If

View 6 Replies View Related

Checking For A New Record

Jan 5, 2005

Good morning everyone I am writing a windows forms application that will work similar to the windows messenger popup. I need this application to display a message to the user whenever a record is added to table in my DB. Any help would be appreciated in explaining how I can check the DB for new records.

View 3 Replies View Related

Checking Character Set

May 2, 2002

I've forgotten the character set that I've chosen when I was installing the SQL Server 7. Is there a way to check?

I'm currently using US English version of Windows NT4 and SQL7. But interestingly, all the data is in Japanes characters. It's actually for a Japanese website, and the front-end application is written in ASP. I remember reading somewhere that it is impossible to do certain type of sorting (by some particular order for the Japanese language) as it is limited by the choice of the language of the NT OS.

The type of sorting that I'm looking at is the grouping of 5-characters. One example is in http://www.forest.impress.co.jp/aiueo.html

Would this be possible with my current setup? Or would it help if I migrate over to Windows 2000? (I'd rather not move to Japanese NT4)

Your feedback and advice would be very much appreciated!

View 1 Replies View Related

Checking @@Error

Feb 20, 2003

Hi,

Just a brief question. I have a script which does a number of insert statements. What I would like to do is determine if the insert statements were all successful. Aside from checking @@ERROR after every insert, is there a way to check if all the insert statements completed successfully?

Thanks,

Jim

View 2 Replies View Related

Checking For A Range

Aug 5, 2004

I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.

I have having trouble with my SQL statement:


Code:

SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )


(This isn't my actual code, but just the logic)

It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?

Thanks in advance!

View 2 Replies View Related

Checking Job Status Using SQL-DMO

Jun 27, 2004

I have a question I hope someone can help me with.

My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.

The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.

My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).

Is anyone able to shed some light on this?

I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed

Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?

Thanks for any help,
Andrew

View 2 Replies View Related

Checking Agents

Oct 8, 2007

I have around 25 sql servers(sql server 2000) all on windows server 2003. i would like to know if anyone has a script that will poll all the servers and check to make sure the agent is running.

thanks for your help

View 2 Replies View Related

Table Checking

Jan 9, 2004

I need to check one table while updating another table
suppose i need to check table1's value is whether less then 0 or not
without if condition can i check it with update query?
thank you

View 5 Replies View Related

Checking For Null

May 23, 2008

I have a table that I know has a null or nothing in a field. When I run this query to get a list of them nothing comes back at all but it doesn't error out. Any ideas?

select *
from lab_test_add_conf
where table_name = null
order by lab_test_conf_id

View 5 Replies View Related

Version Checking

Mar 18, 2007

I chaps and chappets.

It's been a while!

This is going to sound ignorant but...
I had a look here http://support.microsoft.com/?id=321185

And one thing isn't clear. How doe you know if the 32-bit or 64-bit version was installed?

------------------------
Me: What do you want to know from your data warehouse?
Client: Err...Emm...Everything
Me: OK, that's great. That's all I need to know. I'll see you when it's done.

View 1 Replies View Related

Checking For Availability

May 22, 2007

i'm not fluent with sql and i have a question to ask..

if i want to check whether a product is available between two dates, how can i do so? for example, i want to check whether it's available between 5/23/2007 to 5/25/2007..

thanks

View 11 Replies View Related

Way Of Checking To See If All SP's Work

Jul 25, 2007

Our System currently has on the upwards of 300 stored procedures in it.

We have SP's that call SP's that call SP's and sometimes a Stored Procedure will return 10 ResultSets which are used by .NET.

Some of our developers do not check other stored procedures when they modify the SP parameters, and in doing so break the system until the testers find it.

is there a way to run a command to check ALL the stored procedures to see if they work, they match the SP they're calling, etc?

View 20 Replies View Related

Data Checking?

Jul 23, 2005

Hey all,prolly a simple solution, but why isn't the following string working inmy execute sql step within DTS? It produces results, just not the onesI want... What am I doing wrong?select x from new_files where x like '%[^0-9]%' and x like '%[^a-z]%'It's displaying all the records? It should only be displaying thoserecords that do *not* contain letters or numbers.Thanks in advance!-Roy

View 3 Replies View Related

Best Way To Add To DB While Checking For Duplicates

Jul 23, 2005

Situation:Day 1Table contains 100 items of actions imported via FTP. One of the fieldsin the table can be updated to reflect an assigned unit code.Day 2Actions that may be duplicates of the table from Day 1 (with theexception of the updated assigned unit field) are imported forinclusion in the Table from Day 1.Question- What is the best way to insure that any new items are addedto the table and that no duplicates are added at the sametime?Assistance would be appreciated.

View 1 Replies View Related

Security Checking

Nov 16, 2007

SQL Server allows for a user to have SELECT permission on a View withoutthat user requiring an associated SELECT permission on the underlying tablethat the VIEW accesses, but the user can still access the data through theView. A similar arrangement holds true for stored procedures.So based on these initial known behaviours, I have a couple of questions:1. If a stored procedure A executes stored procedure B, does the user of Arequire execute permission for B also? Or will access to B be permittedregardless because the user was given access to A?2. Similarly, if a stored procedure A accesses a View, does the user of Arequire permissions on the referenced View?I guess to paraphrase what I am trying to determine is whether SQL Serveronly checks permissions at the "entry" point of a particular function, orwhether permission checks are performed "intra-function". My openingexamples imply they are only checked "on entry", but I am wondering if thisbehaviour is entirely consistent. Perhaps the SQL Standard mandates this?

View 1 Replies View Related

Help With Error Checking

Nov 9, 2007

I have built a procedure to send mail using OLE Automation and want to be able to trap error information when it doesn't work. So in an attempt to do that I have the following stored procedure that will return informaiton if the return value is <> 0. Here is how it is being used:

IF @return <> 0
BEGIN

EXECUTE sp_displayoaerrorinfo @handle, @return

END
ELSE
PRINT 'Success'

This works fine, but I would like to write the error message to a table and so I thought I could just alter to to be:

IF @return <> 0
BEGIN

EXECUTE sp_displayoaerrorinfo @handle, @return = @failure

END
ELSE
PRINT 'Success'

Where @failure is a variable I declared earlier. Then I could insert the value of this variable along with some other infomration into a table that would track the errors. However, when I do this I receive the following:

Error: Procedure or Function 'sp_DisplayOAErrorInfo' expects parameter '@HResult', which was not supplied. Number:201 Severity:16 State:4

So it isn't seeing that I am passing two variables into the stored procedure. I know I must be missing something simple but I've tried a bunch of different itterations and can't seem to get it right. Any help would be great. Thanks.

View 7 Replies View Related

Checking For Not Null

Apr 1, 2008

Hi,

How can I check in a conditional split for fields not null? I see where I can use the isnull() function but I need to check for is not null.

View 8 Replies View Related

Checking Job Status Using T-SQL

Dec 19, 2006

Hi.

How can i check the job status using SQL Query?

View 25 Replies View Related

Checking For Records Where One Value Is NOT In The Other?

Aug 27, 2007

I am trying to display results in which a value in my first result table is NOT contained in the second result table. Any idea on how to do this?.



SELECT CUSTOMERID, CUSTOMER FROM TABLE1

WHERE CUSTOMERID NOT IN TABLE2

View 3 Replies View Related

If Statement Checking For Duplicates???

Jul 2, 2007

I'm wanting to create a if statement that will query a table and check for a duplicate and if there is a duplicate return that uniqueID or if it doesnt find a duplicate continue to add a new record...so here is my question is there a way to run a if statement that will call a function (lets say a function that returns like a bool) and if it finds a duplicate grab that id and store it in a session.....i guess my question is how do i query the database for a record and if found return true if not return false....that is my question....

View 9 Replies View Related

Trouble Storing And Checking....

Jul 6, 2007

I'm currently working on this portion of a program...what it does is it takes a "char" of 24 digits, what the user inputs is something like this "50-32-18-000-008.000-018" i take it out of the text box and store it on a session and then call the insert into the database....but like i said the database is configured to have a char of 24 go into it...and it won't insert it is saying that im having a conflicting with the calling of two different things...here is the code.....
//***set the query text to the name of a stored proceduremyCommand.CommandText = "INSERT INTO BZA ParcelNumber, BZAcaseNum, ApplicantID, OwnerID, DateFiled, Acreage, Zoning, HearingMonth, HearingDay, PropertyAddress VALUES (@parcelNum, @caseNum, @applicant, @ownerID, @dateFiled, @acreage, @zoning, @hearingMonth, @hearingDay, @propertyAddress)";
//create an input parameterSqlParameter parcel = new SqlParameter();
parcel.ParameterName = "@parcelNum";parcel.SqlDbType = SqlDbType.Char;
parcel.Size = 24;
parcel.Value = (string)Session["parcelNumber"]; //set the Parcel Number to what is entered in
 
I've tried doing a Convert.ToChar((string)Session["parcelNumber"])  but when i do that it says that the string needs to be one character
 
What should I do??

View 5 Replies View Related

Sql Syntax Eroor Checking

Oct 22, 2007

Dear All,
I have an complex SQL statement that is store in string variable as_SQL. i want to check is it syntax error free or not? how i can do it.
 

View 2 Replies View Related

Checking If Somthing Is In A Database?

Apr 22, 2008

I am very VERY new to using Visual Studios...
I have a SQL database with a table in it "table1" inside the table there is a field "ID"
 I have made a new website project thing, and I have a textbox and a submit button
What I want to do is make a function that will check if what the user has typed into ID is valid, e.g. it exists in the database
 Can anyone point me in the right direction about how I could do this?
Thanks very much
 

View 3 Replies View Related

Checking If No Record Is Returned

Aug 1, 2004

hi,

I basically want the .net version of rs.eof
does anyone know what the code would be using the execute scalar method?

Thanks

View 2 Replies View Related

Checking For Null Statement In Sql

Feb 16, 2006

Hi Everyone,
  I have a query
 
select name, address, city from table1
I want to append address +'-' + city in this query . I want to show hyphen only if both address and city are not null. If name is null then I don't want to show hyphen. How can I get around this problem.
Any help will be appreciated.
 
Thanks,
Vinki
 
  

View 3 Replies View Related

Checking If Update Worked

Dec 13, 2001

Is there a system variable I can use to check if my update statement was successful and updated exactly one row.

Thanks

View 1 Replies View Related

Checking Services Programatically?

Jul 20, 2001

Hi ,
Could anybody point me to an NT/DOS script ( e.g a batch file ) that could check if the MSSQL Server and SQL Server Agent Services are running ?

I am trying to write the following script to check for the status. Each of the following commands gives a 1 as output if the service is running and 0 if it is not. The problem I am facing is that I am not able to check the output after the command is executed. I am neither able to assign it to a variable or include the whole command in an IF statement.

net start | find /c /i "MSSQLServer"
net start | find /c /i "SQLServerAgent"

Is there any other way to do this programmatically ? Any help is greatly appreciated.

Thank You,
Srini

View 4 Replies View Related

Truncate Log On Checkpoint Keeps Checking Itself.

Nov 15, 2000

Can anyone assist with this problem.
Every now and then my overnight backups (backup Exec) fail due to the truncate log on checkpoint being enabled. This occasionally occurs on Master MSDB databases. I have unchecked the truncate log on checkpoint box numerous times and the backups work fine. Then mysteriously the box is checked again and the backups fail once more. I am stuck as to why this can happen. Is there a generic stored proceedure that checks this box ?

Help with this will be welcomed.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved