Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 RepliesOn the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
One of my SQL Servers (SQL 2000 SP4) is reporting this error in the Maintenance Plan. But shortly after it shows this error is does successfully backup my Databases (per log history), however the plan is indicating "failure".
I have no idea how to resolve this nor why it is happening.
Rob.
Facundo writes "Hi:
How can i add a timestamp to a generated file of a complete database backup, the idea is to archive full database backups using the date to identified it.
Thanks a lot.
FB"
When I execute the following transaction log backup TSQL in SSMS
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupTransProductDB.trn';
I get this error:
Msg 3201, Level 16, State 1, Line 2
Cannot open backup device 'D:Database_BackupTransProductDB.trn'. Operating system error 21(The device is not ready.).
Msg 3013, Level 16, State 1, Line 2
BACKUP LOG is terminating abnormally.
I also have a daily database backup job that puts the backup file under this directory.
D:Database_BackupData
So I changed the path to this and it still fails.
BACKUP LOG ProductDB
TO DISK = 'D:Database_BackupDataProductDB.trn';
However if I change it to this path, it works:
BACKUP LOG ProductDB
TO DISK = 'MyServerDataProductDB.trn';
This turns out to be the path I used a few weeks back when I backed up the log for the very first time. But I now wanted to store my transaction log backups in D:Database_BackupTrans.
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
We recently upgraded to SQL 2005. A windows service account was setup for the SQLServer agent as(domainuser). Our backups are failing with the following message.
Unable to perform a SETUSER to the requested username 'dbo' because the username is invalid for database.
The master and msdb backups are working fine.
Hi,
I was trying to restore some databases from one SQL Server to another SQL server on another machine. When i backed up them i followed the procedure described on the MSDN website.
Now when tried to restore them on to a new machine on another instance of SQL Server i got the following error. I really dont know what it means. The error is:
"Device activation error. The physical file name 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite.mdf' may be incorrect.
File eRoom_eRoomSite cannot be restored to 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite.mdf'. Use WITH MOVE to identify a valid location for the file.
Device activation error. The physical file name 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite_log.ldf' may be incorrect.
File eRoom_eRoomSite cannot be restored to 'C:Program FilesMicrosoft SQL ServerMSSQL$SOPHOSDataeRoom_eRoomSite_log.ldf'. Use WITH MOVE to identify a valid location for the file.
RESTORE DATABASE is terminating abnormally."
Now from the file location i can see that it has got the location of database where it was belong but question is why it is storing the old path here on the backup file. On the path "MSSQL$SOPHOS" is the instance of the SQL Server from where it was backed up. According to the Administrator's pocketbook on the microsoft web site we can restore a database on a completely new machine, then why is this error. Can anyone please help me.
Thanks very much.
I am needing to restore a SQL server 7 database. I had a backup, but the media it was on has failed. I have copies of the folder the original database was in (.mdf files and such), but I was wondering if there is a way to re-integrate these files in order to pick up where we left off. Thank you.
View 3 Replies View RelatedHad a recent drive failure on or server. Subsequently Our sql database failed to backup. Ran dbcc checkdb and got the following errors:
Msg 8966, Level 16, State 2, Line 1
Unable to read and latch page (1:241724) with latch type SH. 1(Incorrect function.) failed.
Msg 2533, Level 16, State 1, Line 1
Table error: page (1:241724) allocated to object ID 370100359, index ID 3, partition ID 868679827259392, alloc unit ID 868679827259392 (type In-row data) was not seen. The page may be invalid or may have an incorrect alloc unit ID in its header.
[Code] .....
We backup the database using the following method
1. launch the DacIESvcCli.exe at specified time, which in-turn calls the service (southeast asia).
2. the bacpac is created and uploaded to the specified storage
However, after upgrading the Server to V12, it failed to create bacpac file in the storage, there are no errors/no logs/no information.
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Tran Backup failed. How to find the database for which Tran Backup failed as attached?
View 2 Replies View RelatedThere is a lot of documention concerning data(base) backups, but I could not find information about how to backup a complete SQL Server instance (data + configuration) or the SQL server configuration (= everything, that is not user payload). you always re-configure your system after restoring, especially because you will forget some settings?I found following things necessary to backup configuration:
server-wide:
security: login, roles, ...
server objectsserver properties (e.g. collation, connection or memory settings; see SSMS "Server - Properties")
per database
database settings (SSMS - database - properties)scheme
1. Is there anything missing?In case of a severe system crash I would like to be able to recover the system using a full system image of the virtual machine. However I just create these images after significant changes (e.g. Windows service pack).The SQL server should be backuped independently from these system images.
2. Even if I used SQL Server maintenance plan, choose "backup all databases" and additionally backup resources DB manually I think, that some configuration is still missing, right? Where are the security configuration and server properties saved? In my system database there are some tables, but there is very little content inside, so that the data from the views INFORMATION_SCHEMA* and sys.* obviously is not saved there.SQL Server system objects, such as sys.objects, are physically persisted in theResource database, but they logically appear in the sys schema of every database. URL....What does that mean: Are all DB/table schemes, logins, ... saved in resource DB?
3. Does a usual SQL Server full database backup also contain all settings concerning this database (database properties, logins, ...)?
4. Is there at least a way to backup ONLY the configuration (server-wide and database) without data? The only tool I could find is DACPAC, that exports a database's scheme and some other configuration, but e.g. the database properties are not included: By default, the database created during the deployment will have the default settings from the CREATE DATABASE statement. The exception is that the database collation and compatibility level are set to the values from the source database. URL..
Hi,
I have SQL Server 2000 with SP4. When we take backup from Enterprise manager its fails with error "timeout expired". But when we take backup from query analyzer it works.
It seems that through enterprise manager 30 sec is the non configurable timeout parameter set. Checked sysprocesses table during backup but there was no blocking during that time at least for that spid.
Is there a way to find out which process is blocking the database backup? Also, what are the possible scenarios where database backup can be blocked.
Thanks,
Ramesh
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedI have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies View RelatedI need to copy a just-created bak file to another drive after the backup task has completed. I don't see anything in the job toolbox which works with file system operations like this. But still it must be a common need..There are ways to script this or use third part tools but I am looking for something native to the sql server 2012 SSMS toolset, if possible.
An alternate approach would be to run the backup job again, after the main backup, and change the destination to the alternate location. But I was thinking that another backup job would probably invoke more overhead on the server than a simple file copy operation. If I do end up taking this approach I could also use the cleanup task to toss older bak files in the alt dir.
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies View RelatedHi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg
I am using sql server 2000 and windows server 2003 standard edition:
My database backup job is failing due to lack of disk space. I am taking the backup onto E drive and the
available free space on E drive is 6.85 GB and there are no other drives I can use for the database backups.
The size of mdf file is 21 GB and that of ldf file is 4.2 GB.
The transaction log back up job of that db ran fine.
This database recovery model is Full and
Auto shrink is not checked.
There is one primary filegroup for the database.
In this situation, I am thinking of the following option:
1. Backup the db and log files onto another network shared drive.
If I want to still use the same server E drive to backup the db and log files instead of using another network shared drives.
how can I do that.
Please let me know the best way of handling this issue.
Any help is greatly appreciated. Thanks!
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
Hi,
I run the follow command to backup the database log file after a full database backup.
backup log supl_pzhou2 to supl_pzhou2_log
and got the following message.
Processed 3 pages for database 'supl_pzhou2', file 'SUPL_Log' on file 2.
BACKUP LOG successfully processed 3 pages in 0.485 seconds (0.049 MB/sec).
The problem is, the log file .ldf is still the same size after the backup log command. it is 14GB.
THe datafile is only 2GB in size.
How do I write the backup log command properly so the log file can get truncated?
Thanks in advance.
Pingx
What ius the synthax to backup an SQLServer DB from the command line ?
Thanks
This is maybe a dumb question but I couldn't find a definitive answeron BOL.Looking at my backup script. If I issue a CHECKPOINT, does this trulyforce all transaction log entries to the data file? Therefore, makingit unnecessary to BACKUP log (just BACKUP database is needed).Louis
View 1 Replies View RelatedI need to have RETAINDAYS=6hours on a backup command. How can I code that,seems like it should be in integer only,any work-around to have the retain days only few hours(less than a day)?
View 1 Replies View RelatedHi there, I'm not exactly sure where to post this question, so I'll post it here.
I have 2 Windows XP machines, not part of a network domain. One of the XP machines is running SQL Server 2005 Express edition, lets call this DB machine. The other machine is just running my application - App machine. As part of my application, I want to be able to do a backup of the database.
The DB machine is also running the application. If I log into my application on the DB machine using SQL Server Authentication, and run the backup it works fine. (It's using the T-SQL BACKUP command). If it log into my application on the App machine, and try to do the backup, I'm getting an error saying that "The user is not associated with a trusted SQL connection". The same user is being used in both scenarios, and this user can update the database fine on the App machine, so it's not really a connection problem, it seems a permission problem. The SQL user I have created is a member of the db_backupoperator role for the required database.
Is anyone aware as to why I would be getting this error?
This script will read the contents of a DB backup file, and generate a restore command.
Set the value of parameter @backup_path to point to the backup file, run in Query Analyzer, cut/paste the output into another Query Analyzer window, modify as necessary, and run.
This is just a barebones script to demo how this can be done. Modify as necessary to meet your own needs.
Works in SQL 2000 and 7.0. May work in SQL 2005, but it is not tested.
-- Create Restore Database Command from DB Backup File
set nocount on
go
declare @backup_path nvarchar(500)
select @backup_path =
-- Path to Backup file
'\SERVERNAMESHARE_NAMEMY_DB_BACKUP_FILENAME.BAK'
create table #header (
BackupNamenvarchar(128)null,
BackupDescriptionnvarchar(128)null,
BackupTypeintnot null,
ExpirationDatedatetimenull,
Compressedintnot null,
Positionintnot null,
DeviceTypeintnot null,
UserNamenvarchar(128)not null,
ServerNamenvarchar(128)not null,
DatabaseNamenvarchar(128)not null,
DatabaseVersionintnot null,
DatabaseCreationDatedatetimenot null,
BackupSizedecimal(28,0)not null,
FirstLsndecimal(28,0)not null,
LastLsndecimal(28,0)not null,
CheckpointLsndecimal(28,0)not null,
DatabaseBackupLsndecimal(28,0)not null,
BackupStartDatedatetimenot null,
BackupFinishDatedatetimenot null,
SortOrderintnot null,
CodePageintnot null,
UnicodeLocaleIdintnot null,
UnicodeComparisonStyleintnot null,
CompatibilityLevelintnot null,
SoftwareVendorIdintnull,
SoftwareVersionMajorintnull,
SoftwareVersionMinorintnull,
SoftwareVersionBuildintnull,
MachineNamenvarchar(128)not null,
Flagsintnull,
BindingIDuniqueidentifier null,
RecoveryForkIDuniqueidentifier null,
Collationnvarchar(128)null,
Seqintnot null
identity(1,1),
)
create table #filelist (
LogicalNamenvarchar(128)not null,
PhysicalNamenvarchar(128)not null,
Typenvarchar(10)not null,
FileGroupNamenvarchar(128)null,
Sizedecimal(28,0)not null,
MaxSizedecimal(28,0)not null,
Seqintnot null
identity(1,1),
)
insert into #header
exec ('restore HeaderOnly from disk = '''+@backup_path+''' ')
insert into #filelist
exec ('restore FilelistOnly from disk = '''+@backup_path+'''')
declare @tab varchar(1), @cr varchar(2)
select @tab = char(9), @cr = char(13)+Char(10)
select
[--Restore--]=
case
when a.Seq = 1
then
@cr+
@cr+'restore database '+c.DatabaseName+
@cr+'from disk ='+@cr+@tab+''''+
@backup_path+''''+@cr+'with'+@cr
else ''
end+
@tab+'move '''+a.LogicalName+
'''to '''+a.PhysicalName+''' ,'+
case
when a.Seq = b.Seq
then
@cr+@tab+'replace, stats = 5 , recovery'
else ''
end
from
#filelist a
cross join
( select Seq = max(b1.Seq) from #filelist b1 ) b
cross join
( select DatabaseName = max(c1.DatabaseName)
from #header c1 ) c
order by
a.Seq
go
drop table #header
drop table #filelist
Results, modify as needed:
--Restore--
--------------------------------------------------------------------
restore database MY_DB
from disk =
'\SERVERNAMESHARE_NAMEMY_DB_BACKUP_FILENAME.BAK'
with
move 'PRIMARY'to 'D:MSSQLDATAMY_DB_PRIMARY.MDF' ,
move 'DATA1'to 'D:MSSQLDATAMY_DB_DATA1.NDF' ,
move 'DATA2'to 'D:MSSQLDATAMY_DB_DATA2.NDF' ,
move 'LOG'to 'D:MSSQLDATAMY_DB_LOG.LDF' ,
replace, stats = 5 , recovery
CODO ERGO SUM
Hi there, I'm not exactly sure where to post this question, so I'll post it here.
I have 2 Windows XP machines, not part of a network domain. One of the XP machines is running SQL Server 2005 Express edition, lets call this DB machine. The other machine is just running my application - App machine. As part of my application, I want to be able to do a backup of the database.
The DB machine is also running the application. If I log into my application on the DB machine using SQL Server Authentication, and run the backup it works fine. (It's using the T-SQL BACKUP command). If it log into my application on the App machine, and try to do the backup, I'm getting an error saying that "The user is not associated with a trusted SQL connection". The same user is being used in both scenarios, and this user can update the database fine on the App machine, so it's not really a connection problem, it seems a permission problem. The SQL user I have created is a member of the db_backupoperator role for the required database.
Is anyone aware as to why I would be getting this error?