Backup Fails With Error Message SQL-DMO (ODBC SQLState:42000) - Need Help !!!
Nov 15, 2007
Hi,
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
Thx
Overlord1970
View 5 Replies
ADVERTISEMENT
Jan 18, 2008
Good morning all. I need some help with a stored proc that is driving me up a wall. It's probably something stairing me right in the face but I can't see it!
I keep getting the following error on the procedure that I'm working on:
SQL-DMO (ODBC SQLSTATE: 42000)
ERROR 156: Incorrect syntax near keyword 'AS'
Must declare the variable '@signid'
Must declare the variable '@signid'
Here's the code:
CREATE PROCEDURE [dbo].[ws_savesignature2db]
@xml as text='',
@image as image='',
@imageformat as varchar(20)='',
@imagename as varchar(40)='',
@imagesize as int=0,
AS
insert into signaturetable
([image], imageformat, imagename, imagesize)
values
(@image, @imageformat,@imagename,@imagesize)
/*
if your XML field datatype is Text or nTEXT, use the code below in Sql Server 2000.
If you use Sql Server 2005, you can use varchar(max) or nvarchar(max) which will be
much easier and you do not need the code.
*/
select @signid = @@IDENTITY
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR([xml])
FROM ws_signature
WHERE signid= @signid
if @ptrval is not null
WRITETEXT ws_signature.xml @ptrval @xml
GO
Any help you can give would be a life saver!!!!
Thanks in advance.
Jim
View 3 Replies
View Related
May 26, 2008
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 3 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
Jan 8, 2008
Problem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked "ok" it first tells me: "Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway?" If I answer "Yes" and "OK" it presents a error msg: "Cannpt open backup device 'c:.......bak. Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg. Can anybody help - need assistance ASAP - thank you
View 4 Replies
View Related
Jun 19, 2001
I am having a problem with a Job Step that is failing. The actual Step runs
a Stored Procedure, but the Job keeps failing and returning the following
error
"sqlmaint.exe failed. [SQLSTATE 42000](Error 22029). The step failed."
Does anyone know what this means ?
Thanks.
View 1 Replies
View Related
Sep 14, 2004
during maintenance plan i get following error :
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]Database state cannot be changed while other users are using the database 'AJAX'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
[8] Database AJAX: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919: [Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
View 2 Replies
View Related
Aug 7, 2007
Hello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I already tested the suggested:
execute as login='adsme' and I get the same error on both (my local installations and production)
appreciate your help
View 23 Replies
View Related
Jun 11, 2007
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
View 3 Replies
View Related
May 5, 2008
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
View 4 Replies
View Related
Apr 9, 2001
We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley
View 4 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Jan 3, 2001
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
View 1 Replies
View Related
Sep 13, 2001
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies
View Related
Feb 29, 2008
Hi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
View 4 Replies
View Related
Jun 16, 2006
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
hi
I have a script which worked fine in SQL SERVER 2000. We have now upgraded to SQL SERVER 2005 (SP1). When I run the script from Query Analyser it works fine. But when I schedule the same script to run as a job, it fails and i get the following error:
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
Now, there is no problem with the syntax.
What could be the problem?? I have been searching for a logical answer on the Internet and although other people seem to have encontered a similar problem, I have yet to find an answer.
Million thanks if u can help.
Thanks
John
View 12 Replies
View Related
Jan 27, 2007
Hi,I have a Scheduled Job on my PC that runs against a Linked Server. Ihave scheduled the Job to run when SQL Server Agent starts and I haveconfigured my SQL Server and SQL Server Agent to start when the OSstarts. The connection to the Linked Server is via my Broadbandinternet connection.I have some suspicions as to the cause and hence a possible solutionbut I want to run my ideas past anyone else who may have experiencedthe same.1. Should I have my DSL modem turned on before I start the PC so thatthe Network connection is available when the OS starts?2. Are the Network connections only made available after you havelogged in and hence not established quickly enough before SQL Serverand SQL Server Agent are started?Yesterday, when I rebooted the PC with the modem still on theScheduled Job ran without failure but this morning again it failed. Myusual routine is to turn on the modem just before I login.If No. 2 is the case then maybe I just need to set the "Retryattempts" parameter.Thanks,Michael HolbertonHospedaje Los Jardines & Sacred Valley Mountain Bike ToursCusco Database Development and Cycling Serviceshttp://www.machawasi.com/http://machawasi.blogspot.com/http://databaseservices.blogspot.comhttp://serviciosdeciclismodelperu.googlepages.com
View 5 Replies
View Related
Dec 12, 2007
I keep getting this error:
OLE DB error: OLE DB or ODBC error: You do not have permission to run 'SP_TRACE_CREATE'.; 42000
I do not want to add the login account to sysadmin role on my production server and giving the logon account db_reader rights to my database is not working. Is there another way around it.
View 3 Replies
View Related
Feb 12, 2007
I have an application that connects to SQL 2000 thru ODBC.
When our administrators login on the workstation the application
works well. But when ordinary users login they get the following error.
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
I have restarted SQL Server and IIS to no avail. We are using SQL and Windows auth mode.
Any ideas? This just started this morning.
View 1 Replies
View Related
Oct 9, 2006
We have an application that connects to SQL 2005 thru ODBC with the following string:
driver=SQL Server;server=server1;database=db2005;uid=serveruser;pwd=pwd1;
When our administrators login on the workstation the application works well. But when ordinary users login they get the following error. (We only have 1 domain)
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
Then the standard SQL Server Login window pops up asking for the Login ID and Password. On the window the 'Use Trusted Connection' is checked and the name of the user on the workstation appears on the LoginID. What we do is uncheck the 'Use Trusted Connection' then login using the credentials above.
Need help on this one please. Thanks.
View 9 Replies
View Related
Jul 20, 2005
sql server 2000 8.00.194Microsoft Windows 2000 Service Pack 2I looked into my sqlserver agent log and found the followingODBC Error 0 Timeout expired[SQLSTATE HYT00]logon to server local '( failed)' (Job manager)I have no idea what that means but it did keep out users for a minute or more.The threads found on this forum almost all point to reccuring situationsmine is a sporadic one time issue.Is it Ok to conclude it is a network error as I did?TIAVince
View 1 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Sep 4, 1998
Hi Everyone,
When I try to install 7.0, I get a message that it needs to some ODBC items, but that one or more is being used by an application, and to shut down all applications and continue. The problem is, I don`t have any other applications open. My McAfee virus scan was enabled, and I disabled that and the clock in the system tray. I can`t go any further with this. Any help would truly be appreciated.
Thanks,
Terry
View 4 Replies
View Related
May 3, 2007
I tried to create an ODBS syste data source but I get this error:
Connection Failed:
SQLState:'01000'
SQL Server Error:10061
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Connect())
Connection Failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Server does not Excist or access denied.
Thanks
View 1 Replies
View Related
May 5, 1999
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
Does any one know how to fix this.
Any help will be appreciated.
Thank you.
View 1 Replies
View Related
Sep 18, 2007
The following error occurred but did not provide any additional info.
[DTS.Pipeline] Error: The PrimeOutput method on component "Pgrs - tr_hist" (14596) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
For this package I am trying to use DataDirect's ODBC driver for a Progress OpenEdge Database version 9.1E to move data to SQL Server 2005 in order to make use of SQL's BI suite. I have consulted the DataDirect and have that the driver is functioning properly. The driver works perfectly from another application. They suggest that the problem is in the the datareader's or the connection manager's implementation of the driver.
Please tell me what is the cause of this or at least how to troubleshoot this problem.
View 18 Replies
View Related
May 27, 2006
I am trying to make an ODBC connection to a MSSQL 2K server on a remote machine. I am using the SQL Server driver and can see the server in the drop down list when asked which server I would like to connect to. I am using SQL authentication over TCP/IP.
The error occurs when ODBC tries to connet to SQL server to obtain the default settings. The error I receive is as follows:
Connection Failed;
sqlstate '28000';
sql server error: 18456;
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'XXXX'
I have tried setting up alternate SQL Server users with varying security rights on the server but am not able to setup the ODBC connection.
I am setting the ODBC connection up on a windows XP SP2 machine.
The remote server is running Windows server 2003 (patched upto date) and MS SQL server 2K (SP3). The connection is over a LAN and does not pass through any firewalls (hardware or software). I can create the ODBC connection without issue locally on the server.
This is my first time creating an ODBC connection to a Windows 2003 Server and I am wondering if there is some additional config I may have missed out.
Many thanks.
View 3 Replies
View Related
Sep 5, 2007
I have a page that was working but now I am getting the following errors.
Server Error in '/' Application.
ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failedERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failedERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended PropertiesERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDRERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMTERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OdbcException (0x80131937): ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute Extended Properties
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute HDR
ERROR [01S00] [Microsoft][ODBC Text Driver]Invalid connection string attribute FMT
ERROR [HY001] [Microsoft][ODBC Text Driver] System resource exceeded.]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DevSite_ImportStep1.btnUpload_Click(Object sender, EventArgs e) +219
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
I am uploading a text file to a MS SQL 2000 database using an ODBC driver. Here is the code:
<code>
FileUpload1.SaveAs(fpath + "" + fn)
litStep1.Visible = TrueDim FieldCount As Int16
Dim FileType As Int16Dim cmd As SqlCommand
Dim dr As SqlDataReaderDim conn2 As OdbcConnection
Dim dr2 As OdbcDataReader
Dim cmd2 As OdbcCommand
conn2 = New OdbcConnection("Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=" + fpath + ";Extended Properties='text;HDR=YES;FMT=Delimited'")
conn2.ConnectionTimeout = 200
cmd2 = New OdbcCommand("Select top 5 * from [" + fn + "] ", conn2)
cmd2.CommandType = CommandType.Text
cmd2.CommandTimeout = 300
conn2.Open()
dr2 = cmd2.ExecuteReader()
FieldCount = dr2.FieldCount
conn2.Close()
</code>
Before when this happened a reboot of the sql server resolved the problem. That's not working this time and it's certainly not a practical solution.
Any suggestions?
View 2 Replies
View Related
Apr 15, 2001
We have changed the Network Domain name of a SQL server and restarted before changing any of the settings in SQL server. When we now try to start the SQL server service manager we get the following error
Your SQL server is either corrupt or has been tampered with. Unknown package id please rerun setup
Any suggestions on how to get the SQL server back on line without having to take the server down and changing the Netowrk Domain Name back ??
Cheers
SR
View 1 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
May 27, 2008
I am using web developer 2008, while connecting to I wanted to fetch data from Lotus notes database file, for this i used notesql connector, while connectiong to notes database i am fetting error
ERROR [42000] [Lotus][ODBC Lotus Notes]Table reference has to be a table name or an outer join escape clause in a FROM clause
I have already checked that database & table name are correct, please help me out
How i can fetch the lotus notes data in my asp.net pages.
View 1 Replies
View Related
Sep 26, 2000
When we are doing our backup of our SQL servor there is one database that won't backup. The user that created it named in Vendor Insurance Compliance with spaces in between the words. The error message that we're getting from the backup is incorrect syntax near 'Insurance' Error number 10007. Is it beacuse of the spaces in between the names? I'm fairly new to SQL server - are you allowed to put blanks in the names?
View 1 Replies
View Related
Oct 30, 2007
I am getting the following error on one of my databases...
"Backup can not be performed on database 'XMASNVENTORY'. This sub task is ignored."
This is the hourly transaction log backup. All of the other datbases backup fine, just this one fails. Any ideas?
Thanks
View 3 Replies
View Related
