hi,
my Backup job, took a backup at 3.00am , backup went well, but this job is still running , now the time is 10.00am.
I tried to kill this job but it is still running.
Why my process still running after taking a backup also.
Can anyone suggest me, how i have to resolve this.
Thanks!
--Ram
Hi Guys,
We have a database with 20 gig and with huge transactions. The transaction log backup is scheduled every one hour
from 3.00 AM to 9.00 PM.
We take a full backup in the disk at 9.00 PM and again a full backup in the tape at 2.00 AM
It works fine in the day from 6.00 AM and complete within seconds and the size is approx. 50 to 200 MB.
But the very first transaction log backup at 3.00 AM is running like 3 hrs and the size is approx. 11 gig whick is almost equivalent to the Full backup size. There are some dts packages that are running in the night and as usual reindex, intergrity checks are running and there no large user traffic during night. But I have no idea which the very first transaction log backup in the morning takes longer time and has this bug size. Is there any work around to fix this proble.
Please advise.
Thanks,
Anu
I went to View Synchronization status and see that the sychronization has been running for two hours already. Is that normal? I thought it would just find the one change I made and update that one change?
Thanks in advance!
Hi Can somebody suggest optimization on this query.
ITs running for hours,I have checked on mutiple Servers but dont know where the problem is.It starts when i add the not exists piece if the query.
Pls help
SELECT distinct
isnull(P.id,'') PersonID
, s.status
, isnull(replace(Ltrim(Rtrim(P.Firstname)),',',''),' ') FirstName
, isnull(replace(Ltrim(Rtrim(P.MiddleName)),',',''), '') MiddleName
, isnull(replace(Ltrim(Rtrim(P.lastname)),',',''),'' ) LastName
, isnull(replace(Ltrim(Rtrim(P.Suffix)),',',''),'') Suffix
, isnull(replace(Ltrim(Rtrim(p.company)),',',''),'') Company
, isnull(replace(Ltrim(Rtrim(PA.AddressLine1)),',',' '),'') AddressLine1
, isnull(replace(Ltrim(Rtrim(PA.AddressLine2)),',',' '),'') AddressLine2
, isnull(replace(Ltrim(Rtrim(PA.City)),',',''),'') City
, State = isnull(replace(Ltrim(Rtrim(PA.State)),',',''),'')
, ZipCode = ISNULL(CASEWHEN LEN((LTRIM(RTRIM(PA.Zipcode)))) = 3 THEN ('00' + (PA.Zipcode))
WHEN LEN((LTRIM(RTRIM(PA.Zipcode)))) = 4 THEN ('0' + (PA.Zipcode))
WHEN SUBSTRING(LTRIM(RTRIM(PA.Zipcode)),6,1) = '-' THEN ISNULL(PA.Zipcode,'')
WHEN SUBSTRING(PA.Zipcode,6,1) = ' ' THEN ISNULL(PA.Zipcode,'')
ELSE substring(PA.Zipcode,1,5)+'-'+ substring(PA.Zipcode,6,4)
END ,'')
, b.code
, CommitteeTermID = ''
, RevenueCategoryid = ''
FROM vwpersons p with (nolock)
join vwsubscriptions s on p.id = s.recipientid
join vwcompanies c WITH (NOLOCK) on c.id = p.companyid
join vwbusinesscodes b WITH (NOLOCK) on b.id = c.primarybusinesscode
join vwRevenueCategorys rc WITH (NOLOCK)on rc.id = c.RevenueCategoryid
join vwPersonPrefAddr pa WITH (NOLOCK) on p.id = pa.id
WHERE NOT EXISTS (SELECT s1.recipientid FROM vwsubscriptions S1 WHERE S1.SHIPTOID =S.SHIPTOID
AND S.PRODUCTID = S1.PRODUCTID AND S1.STATUSID IN (1,2,3,11,12))
and p.id in (select recordid from vwTopicCodeLinks tcl
Where tcl.entityid = 457
And tcl.topiccodeid = 332
And tcl.value = 'Yes')
and ((p.PreferredAddress = 'Business Address' and p.BadBusinessAddress = 0)
or (p.PreferredAddress = 'PO Box Address' and p.BadPOBoxAddress = 0)
or(p.PreferredAddress = 'Home Address' and p.BadHomeAddress = 0))
and b.code in ( 'M2','V2','V5','W1','W2','W3','W4'
,'W5','W6','W7','W8','W9','WZ','X2','X3','X4')
and p.status <> 5
and S.statusID IN (4,5,6,7,8,9,10,13)
and S.productid in (23)
group by b.code ,p.id , p.firstname,p.lastname,p.MiddleName,p.suffix,
p.company,pa.addressline1,pa.addressline2,pa.city, pa.state,pa.zipcode, s.status
The following basic UPDATE SQL statement has been running for 16 hours and counting. I need to get this done ASAP.
UPDATE Recipients SET UndeliverableTime = getdate()
FROM Recipients
INNER JOIN Domains ON (Recipients.DomainID = Domains.ID)
INNER JOIN Undeliverables ON (
Recipients.UserName + '@' + Domains.Domain =
Undeliverables.EmailAddress)
Is there any way I can see how far this has gone and how long it will take to finish? Will this take another hour to finish or another week?
Both tables (Recipients and Undeliverables) have approximately 80 million records
I did a nearly identical operation with another table that had only 7 million records and it took 10.5 hours. I hope this doesn't scale linearly to 115 hours.
I am tempted to cancel, retune, and rerun but that may be trigger a really expensive rollback operation that could take days. Any ideas?
thanks!
I need a sql script for Jobs is running more-than 3 hours in a current server, based on a particular jobs.
View 2 Replies View Related
We are currently using a Merged replication and Push subscriber to replicate the databse from DB1 to DB2 every hours. The replication process successed for first 20 hours but we found that the replication process cannot be completed after 20 hours with the following error codes:
Action Code Last Action Msg
4 The process could not query row metadata at the 'Subscriber'
363 The process could not deliver insert(s) at the 'Subscriber'.
Thanks million for your kindly help!!!
I have a table called PJLabDet.Total_Hrs which is the sum of hours of 7 days.
I would like to get a running total for this field which would reset when my group (called PJLabDat.pjt_entity) changes.
Creating a burn down chart using a running total of cumulative hours with the following formula:
CumulativeHoursLeft:=CALCULATE (
SUM('Projects'[Budget hours]) - SUM ( 'hours'[Hours] ),
FILTER (
ALL ( 'hours'[Date] ),
'hours'[Date] <= MAX ('hours'[Date])
)
)
Works great except that in a Line Chart using [Date] as the Axis and CumulativeHoursLeft as the value, I get these spikes on days for which the employee reported no hours. I do know what exactly the measure is doing in this instance and I do not get this in a table, those dates simply do not appear. I have tried both Categories and Continuous for the Line Chart. I have also tried filtering where [Date] is not blank.how to get rid of the spikes?
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
I need only the count of databases that last fullbackup was older then 24 hours or null. and status is online. I have tried
SELECT Count(DISTINCT msdb.dbo.backupset.database_name)
From msdb.dbo.backupset
where datediff(day,backup_finish_date,GETDATE()) > 1 -- or is null
and Database_Name not in ('tempdb','ReportServerTempDB','AdventureWorksDW','AdventureWorks') --online also
group by Database_name, backup_finish_date
Tried using where max(backup_finish_date) < datediff(day,backup_finish_date,GETDATE()) .But get the aggregate in where clause error. get a count of databases with backups older than 24 hours not including the samples, report service, and tempdb. I would also want to put status is online but havent gotten the above to work so havent tried to add that yet.
How do we know the list of all the backups that are present in a particualr backup device like file# and time of backup taken etc for the purose of restore?
When I run :
RESTORE HEADERONLY FROM BackupDeviceName
it doesn't give that info. Can anyone tell me the exact command to list all the files of a backup device so that I can restore the right one??
Thanks.
Shalini.
I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) col2 (In Hours : Mins)
3days 4:5
In this first have to add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
View 3 Replies View RelatedI run an Operating system backup nightly using Veritas Backup exec (v8), immediatly after I run a SQL written backup job.
1. Can I use the same tape? Appending to the media that Veritas has written to?
2. How do I run the backup from cmd line from within Veritas? It has an option to "execute after backup job:"
- How do I run a SQL job from operating system?
Thanks,
AJ
I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.
Sorry i think i may have posted this in the incorrect forum before - if i have done it again here can someone tell me where i should post this please, thanks:
Hi,
we are having problems with a server Intel RZeon 3ghz, 3gb ram running 2003 service pack 2 with a 70gb drive and and 400 gb drive all with adequate free space. There are 6 hard disks in total and i assume operating at least RAID 5. We have SQL2000 server with a few standard sized databases and a connection to one other server.
A few months ago the back up of SQL server databases started taking 4- 5 hours when before it took 20 minutes. We had actually lost one of our disks in the RAID array and it before this was spotted by our engineers we reindexed the sql databases and defragged both 70gbC: and D: 400gb drives hoping to correct this slow down. Unfortunately the new disk had not been correctly seated and this was why it was taking 4-5 hours. After fixing the disk the backups took 12 minutes again but then started taking 2-3 hours after a few days.
The reindex/defrag did seem to improve the speed of the backups to 12 minutes (from 20 minutes) when the backup did function correctly (also the sql databases' performance improved). However the backups only take 12 minutes after a server reboot - this can last from only 2, up to 5 backups(days) in a row before a slow down to 2-3 hours and again only a reboot will sort out this problem.
NB this intermittent slowdown only occurred after the disk failure.
We have tried monitoring SQL server and can find no CPU/RAM intensive clashes or long running jobs interferring with the back up. Does anyone know what might be going on here? and if there are any server monitoring tools that may help us discover what is causing this problem ?
thanks for your help
best regards
kevin
One of our databases seems to be looking dodgy as some scheduled jobs are failing, but DBCC CHECKDB is no use since it has been running for over 1/2 hour without giving me any results, just the spinning globe.
How do I find out what is wrong without resorting to backups?
I have a question on database size, specifically, what difference would I expect in the size of a db (the space actually used for data, not indexes) if I have one single data device vs. multiple data devices spanned across different physical drives. I have 2 customers that have identical database tables (all columns are integers), customer A has 27 million rows and customer B has 36 million rows. If I do an sp_spaceused on the table, customer A's data takes up 9.7 gig, whereas customer B only takes up 3.2 gig, even though it has 9 million more rows. Statistics have been updated, so I'm confident the sp_spaceused is accurate on both databases.
The only differences I can see between the 2 databases is that customer B has 5 separate data files (6 gig each) for the database which are part of the Primary filegroup. These files are all on the D: drive, which is a partition on a RAID 5 array. Customer A has a single large data file (24 gig), which is also on a RAID 5 array.
Any ideas?
I need to run stored procedures which are currently run on server A(located in another city),by connecting myself to it through my laptop running on SQL server 7.0(only client components installed)on NT workstaion4.0. Can anyone tell all the steps involved to run those stored procedures everyday.Even I need to monitor Server A from my laptop.Please advice...Urgent!!
View 1 Replies View RelatedHi,
I have SQLServer 6.5 SP5a update running on Windows NT 4.0 SP6
with 4 gig RAM and 4 processor.
Suddenly the SQL 6.5 jobs running on the production server started running very very slow. A job that suppose to run in 30 minutes are running like 2 hours and completing successfully.
(I suspect the after the Norton Anti virus automatic live update may be the reason but not the Second Vulnerability as mentioned by Microsoft Bulletin last week)
I check the SQLServer, ran the performance monitor, checked pagefiles, disk space, databases,memory, tempdb. Everything seems to be normal.
I rebooted the server, checked any other process making that slow. But no use.
Please help me out with this issue as this is a production and the CRM applications from the clients uses the database server.
Thanks in advance,
Anu
Hi all ,
When i Run the report in reporting services, it locks the tables.
so is there any option to Unlock the tables. I m using just select query to run the report but when i run the report it locks the tables.
I used with(nolock) option in select query but it didnt work...still showing me lock on the tables.
Pls help...its urgent
Thanking You,
Rupali Rane.
Hi All,
I have an issue where I am told that we should run Exchange/IIS/MS SQL7/Site Server on same physical PC (cost cutting analysis).
Could anyone please tell me in a few words why I should not run the above mentioned services on the same physical computer ?
I would appreciate any input.
Regards,
Romy Stevensen
hi all,
i have a requirement that web service running in one system and sql server 2005 database running in another systems which is not working currently.
suppose i create end point in the system where sql server 2005 database is there,then its working fine.
Actually for creating end point we should have windows server 2003 or SP2.Configuration part i dont have any hindrance.
Can any one tell how to run webservice in one system with sql server 2005 in another system.
Thanks
venkat
Any ideas on how you might determine if a database backup is currently running? T-SQL script is preferable.
Background (SQL 2000 SP4):
I was previously running a script to backup the transaction log on a large database each hour. The script first looked in the backupset table in the msdb database to determine if a full backup was running by looking for a null value in the backup_finish_date column. Then the log backup would wait until the next hour to commence if it found a full backup had not finished yet. Some other cleanups and file numbering were also dependent on whether or not a null value was found in this column.
This process stopped working for me recently so I have looked closely at the inserts on the backupset table and found that the row for a given backup is not committed until the backup has completely finished. Therefore, the above process will not work as intended.
Thanks!
Intially my backup was working fine since couple of days it started failing, when i checked the backup through maintainance plan i saw that it does'nt recognize the mapped drive it says invalid drive.
Basically i want to take backup of the on database A from Server A to Server B which i mapped. G:oppxyz00t142linktest.
Both Sql server and Agent use the system account => kavitha is the user account through which i login hence i think this is the system user name, i have been give full access to the mapped drive.
I appreciate your help.
Kavitha
When i tried to take a backup on a remote server i got this error.Not only this master all the user tables and other system databases also failed,the also give the same error.
Database master: Database Backup...
Destination: [dgssmf01q001ackupmastermaster_db_200108220401.BA K]
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3202: [Microsoft][ODBC SQL Server Driver][SQL Server]Write on 'dgssmf01q001ackupmastermaster_db_200108220401.B AK' failed, status = 5. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Backup or restore operation terminating abnormally.
could any one tell me what might have caused it and how do i go about to solve this.
Thanks for your precious help.
Kavitha
I had my IT dept. install sql server 2005 enterprise edition on a new windows server 2003. All other machines are running sql 2000 server on windows server 2000. I am a sa and local admin on all servers. I tried performing copy database, backup and restore and detach and attach to upgrade the sql server 2000 databases to 2005 and all fail. They also installed sql server 2005 sp2. I followed all steps. It's like the servers dont talk to each other. Their all on the company's domain. I am wondering if something happen with the install but the IT dept. insist that everything went fine. It's strange that I can't perform a simple backup and restore it on the new server buy when I click on restore it doesn't let me browse to get the backup file on the 2000 server. I never had a problem in Sql 2000 with backup. Can it be the installation was corrupted somehow. It seems fine. I haven't created any new databases because I wanted to move the databases from sql 2000. Can anyone help me get a clue of what the problem is please?
Thanks
HI Guys.
i cannt' understand what's going on the server.. actually i have created a two jobs for full backup for my databases.. One is running perfect but one is giving me following error.
Can any one tells me where i m doing mistake.
Message
Executed as user: Domainuser. Cannot open backup device 'Database_Full(\192.0.0.1BackupsFULL_Backupsdatabase_Full.BAK)'. Operating system error 53(error not found). [SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Hi,
Schedule backup job which usually completes in 1 to 2 minutes, it's been running for over three hours. Meanwhile transact log backup job executed and it's hanging also.
I stopped the jobs, which now shows last run status 'cancelled'. But the spid still exeists in 'current activity' pane with status 'runnable'.
No locks or blocks!
Is there anyway I can get rid of this spids so that I can start backup job again?
It's very urgent..
THanks
My database backup which was scheduled to run every day at 2A.M is still running, I issued kill command for the process at 10.45A.M , rollback process is still running for the last two hours. Can anyone help me out how to solve this problem.
Thankx
VS
Can I backup a db which is on server1 by sitting at server2 by way of running a script on server2.
Thanks.