I have a biztalk db server where I have few job steps. The log bkp job steps which the below error but when I go to the location of backup/checking the msdb backupset table I can see the backup file.
[SQLSTATE 01000] (Error 4035) BACKUP LOG successfully processed 1 pages in 0.010 seconds (0.146 MB/sec). [SQLSTATE 01000] (Error 3014)
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies View RelatedHi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
Any and all help is greatly appreciated...
Anthony
Hi friends,
please help me with my urgent needs.
I have created a job. This job contains 6 steps.
All steps are sql querries.
In step no:3 i have an if condition in the script.
When the condition becomes true i have to run the script.
That is ok.
But the problem is when the condition becomes falls i have
to go to the step no 6 and at the same time the status
of step no:3 should be like "failed".
can you help me please
Please this is an urgent reqirement.
Thank you.
For a daily backup job,
Is there a way to "Backup Datbase dbXYZ to backup_dbXYZ with init", go, then next statment of master..xp_cmdshell to zip the backup_dbXYZ.bak to backup_dbXYZ.zip file?
Also, this may need to be done via remote server..
thanks
David
i have a sql server job scheduled to run daily twice.the job is running fine , but once or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'. The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'. The step failed."
View 2 Replies View Related I am getting this error message "Replication-agentclassname: agent F1TESTSQLSERVER20-ELC-ELC_Pub-F1TESTSQLExpress-39 failed. Executed as user: . A required privilege is not held by the client. The step failed." All the users replication agents have failed and I am looking on how to resolve this serious error. Where do I start? I am using merge replication.
Thanks!
SAM
I have inherited a job that is calling a maintenance plan. The maintenace plan makes a back-up of various databases.I have to add a step to add to encrypt the backup. I have the exe already. Its called "EncryptBackup.exe".My difficulty is I do not know how to add the step to the job exactly. The command syntax eludes me a bit. The syntax for the encrypter exe is:
C:exesEncryptBackup.exe C:DBBackupFolderA Encypt filename.bak
The output is "filename_encrypt.bak". It should be noted that there exists several sub-folder off: C:DBBackup like FolderA, FolderB, etc...each one holds a database.
Hi All
I have job with three steps
Step1.Alter database <xxxxx> set recovery simple
Step2 DTSrun /....../........
Step3.Alter database <xxxxx> set recovery full
GO
Use XXXXX
GO
dbcc shrinkfile (XXXXX_Log, 200)
Up to yester day my Job ran fine today job got failed at Step1
Executed as user: CLUSTURsa_admin. The log file for database '<xxxxx>' is full. Back up the transaction log for the database to free up some log space. [SQLSTATE 42000] (Error 9002) Could not write a CHECKPOINT record in database ID 3 because the log is out of space. [SQLSTATE 01000] (Error 3619). The step failed
some body help me what to do now,
changing recovery model also needs space?(Simple to Full/Full to Simple)
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies View Related
Hi All,
Please let me know where can i find the sample files and rs2005sbsDW database in msdn library as i dont have CD provided along with the book.
Please give me the link of the sample files so that i can download it for testing the sample application.
Regards,
Prabhanjana
is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies View Relatedhye everyone,
after finished do the report and deploy at IIS/report manager in local pc..
i want to know , what is the step /how to deploy the report project at the user's pc/ client pc /other server..
thanks in advance
thank you very much
I want to convert .rdl to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
View 5 Replies View RelatedI have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
Hi!
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is:
1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however.
2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005)
3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
Thank you very much.
John F.
Hi,
I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory.
Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Regards,
harry
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Cheers,
Craig
Is there a good step by step guide to setting up an indirect configuration? I've followed the steps in Kirk Haselden's 'Keep your packages in the dark' article 3 or 4 times this afternoon and nothing seems to work. I cannot even get the XML configuration file to work by accessing it directly. I'm using the wizard to create the file.
Just wondering if there was something else out there....
Thanks in advance for any help.
MarkA
Hi
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
This humble grasshopper seeks wisdom.
Respectfully Submitted,
Dave Matthews
Atlanta, GA
aka FlooseMan Dave
What dose this error mesage mean?
The Microsoft Tape Format (MTF) soft filemark database on backup device 'VbLSADBMCBACKUPvatt_cequest_backup.BAK' cannot be read, inhibiting random access. [SQLSTATE 42000] (Error 3266)
Backup or restore operation terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed
My DB backup to hard drive fails and the SQL error log contains the following message:
The Microsoft Tape Format (MTF) soft filemark database on backup device '%ls' cannot be read, inhibiting random access.
In SQL this is error 3266 but no other information is available.
Does anyone know what I should do?
Thanks
Paul
Guys,
When I try backup database, I see error message:
Can't open dump device 'C:mssqlBACKUPest.DAT', device error or device off line. Please consult the SQL Server error log for more details. (Message 3201)
What does it mean??
Thanks,
Alona
I am running our CRM and, for the first time, tried running backups today. I'm getting the following error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Backup failed for Server 'XXXXX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: An error occurred while processing 'BackupMetadata' metadata for database id 5 file id 65538. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
This is our live database, so I have to be careful with what I do. Some googling hasn't really helped. dbcc shows nothing. I've since tried removing the full text catalogs (that's what the file_id references in sys.database_files), but the 65538 file_id remains. So, if anyone knows how I can get around this to backup my data, I'd love to know.
Hi,
I Scheduled a job to take a backup@everyday 11:00P.M.This job fails and showing the following error.
SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'LA'' (0x77C06CE237C0B4418CF661ADF98FEC43) - Status: Failed - Invoked on: 2008-04-30 08:12:47 - Message: The job failed. The Job was invoked by User DMN1fisc-sql-svc. The last step to run was step 1 (Step 1).
What could be the reason??
Hi,
I Scheduled to run a job at every day@11P.M.The job has been failing every day.This is the error message...
SQL Server Scheduled Job 'DB Backup Job for DB Maintenance Plan 'LA'' (0x77C06CE237C0B4418CF661ADF98FEC43) - Status: Failed - Invoked on: 2008-05-01 23:00:03 - Message: The job failed. The Job was invoked by Schedule 200 (Schedule 1). The last step to run was step 1 (Step 1).
Anyone can hepme ASAP!!
Hello,
Yestarday night we had a log backup failure at 3.00 AM on a sql server 2000. After that the hourly log backup's went on smoothly.
When I checked the sql server logs , it showed me the error:
Backup Disk File:Create Media:Backup Device 'D:mssqlackupvmwarevmware_log' failed
Operating system error=32 ( The process cannot access the file because it is being used by another process)
I tried to google it , but could not get a good answer.
Can anybody help me out what the error means.