Hello,
I am trying to backup a database with a command like:
BACKUP DATABASE my DataBase TO DISK = '\bkSystemkDiskBackup1.bak'
but I get the error 'Cannot open backup device '\bkSystemkDiskBackup1.bak'. Device error or device off-line.
The bkDisk folder is shared, with Everyone full-control access (it's a test environment)
MS SQL 2000.
I would like to backup my databases to a network share (NAS) instead of local disk using Maintenance Plans created by Enterprise Manager. I have successfully used a UNC path to target the destination network share but have not been to figure out how to submit a logon to the network share before the backup is executed.
The SQL Server instance is running in the context of the local system account.
Can I insert a step in the SQL SQL job that is created by the Maintenance Plans that changes the Windows account that the backup runs under? If yes what command syntax would I use in the inserted step or is there another way to accomplish that I'm attempting to do?
thanks
HP
I attempted to backup my database to a shared drive using the UNC path and it gave me access denied. Any thoughts?
View 2 Replies View RelatedHello,
I am experiencing an issue with SQL Server 2000 Maintenance Plan.
DB Backup job fails to delete old backup files from the file server (I am backing up to the network share - actually, a DFS).
Backup part of the maintenance plan/job succeeds, but then cleanup part fails.
I made sure that service account under which SQL Server Agent is running, has sufficient privileges over the network share by logging in and successfully deleting files in question.
I was not able to locate any log entries either on the SQL Server machine or on the file server machine that would indicate the root of the problem. Even though I turned on auditing for Delete operations for the destination folder, its subfolders and files, I could not find anything in the Security event log.
I would appreciate any ideas on how to troubleshoot and correct this problem.
Thanks in advance,
Hi,I am not able to execute following command from computers other than the SQLserver itself.select * from openrowset(bulk N'\ImageServerModelCam_05.dwg',SINGLE_BLOB) as docI get following error message:Msg 4861, Level 16, State 1, Line 1Cannot bulk load because the file "\ImageServerModelCam_05.dwg " couldnot be opened. Operating system error code 5(Access is denied.).If I use local file path and keep the file on the SQL server then it worksfine from any computer.select * from openrowset(bulk N'D:ModelCam_05.dwg', SINGLE_BLOB) as docThe network share has read access for everyone.What should I do to make it work? I am not allowed to move the files and theapplication which loads them to the SQL server.ThanksSachin G
View 2 Replies View RelatedI've recently moved an asp.net website from my PC to a network share because another tech it going to be working on it. I finally got the correct permissions on the network share and the correct .NET Framework settings on my PC to be able to run the app. Now I can't access the SQL server which is on a different server. Getting the following error:
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
How to I setup access to my SQL server for the app from any given PC on my LAN?
how can Share may sqlexpress 2005 on network that other can access my databasess on their pc and edit update and insert recored into my table
please tell me how can do this ?
Hello All,
I 'm trying to attach a database to my sql server 2005 using the following syntax:
Code Snippet
DBCC TRACEON(1807, -1)
GO
EXEC sp_attach_single_file_db 'MyNetworkDB', '\leaf7dbsMyNetworkDB.mdf'
GO
Also, the folder dbs and the mdf file MyNetworkDB.mdf has full permission for Everyone.And when executing the above statement, i get the following error:
Code Snippet
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Msg 5133, Level 16, State 1, Line 1
Directory lookup for the file "\leaf7dbsMyNetworkDB.mdf" failed with the operating system error 5(Access is denied.).
Hey All,
This is my first time using the forums here nor am I a SQL programmer. I'm trying to help a coworker figure out how to access files from a network share (using a UNC path) from a different domain. Right now we have three domains - Production, Development, and the Local. There is a one-way trust setup with the development and local domains, so using cross domain accounts is easy. Unfortunately, we cannot setup one right now with our production domain to any of the other two domains. Is there a way to pass production credentials from our local or development domain servers to a production server share? Am I even approaching this in the right way? Maybe there is a different method, any help would be GREATLY appreciated!
-Andrew
Network Administrator
Somehow I have an impression this can be done.
Somehow I tried myself by modifying MsDtsSrvr.ini.xml to point it to network UNC share, but it didn't work for me. It gave me an error
"Failed to retrieve data for this request (Microsoft.SqlServer.SmoEnum)
Additional Information: The storage localtion for the folder 'File System' cannot be accessed. (MsDtsSrvr)"
I checked my UNC permission, and I even allow full access from "everyone", but it still does not work.
I paste my MsDtsSrvr.ini.xml here too, and any help is greatly appreciated!
<?xml version="1.0" encoding="utf-8"?>
<DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown>
<TopLevelFolders>
<Folder xsi:type="SqlServerFolder">
<Name>MSDB</Name>
<ServerName>.</ServerName>
</Folder>
<Folder xsi:type="FileSystemFolder">
<Name>File System</Name>
<StorePath>\test01mytest</StorePath>
</Folder>
</TopLevelFolders>
</DtsServiceConfiguration>
Can a SQL Server 2005 Compact Edition database file be deployed on a file share and be accessed by multiple (5-10) concurrent users? This is a current scenario being implemented at several sites using MS Access databases.
Each client would have the SQLce engine installed on it and would only access the database via a managed C# application.
I have SQL Server 2014 (Enterprise) on Server A. The service runs under DomainAAdmin.
The Client machine is B, User credentials DomainBUser.
DomainBUser has a share on B that contains a BCP data file. DomainAAdmin has full access to this file.
If I log onto A (the server machine) with either DomainAAdmin or DomainBUser credentials, and run SQL Server Management Studio with Windows Authentication I can run BCP sucessfully using the following:
BULK INSERT [MyTable] from 'Bsharedatafle.tsv' WITH ( KEEPNULLS , KEEPIDENTITY ) However, if I log onto B, (the client machine and the machine hosting the share) and try to run the same bcp command, I get "Access is Denied".
Hello,
Ho do I allow multiple users to share a database?
Background
I have developed a Windows App in VS.NET 2005 which connects to a SQL 2005 Express database.
Now I want to install the app and database on the network and I am getting an error "File 'file_name' is on a network device not supported for database files"
What is the best way to get this working
Thanks in advance,
Phil
SQL Agent will not successfully execute my package as a job. Bids executes the package correctly as well as when I run the package manually (right click, run package) through SQL Server Management Studio. This is a permissions issue with the flat file any help will be much appreciated.Background Information:OS: SQL 2005 on Windows Server 2003Flat File Connection: \servernamefolderfile.txt (If I change the flat file location to a local file the package will run as a job successfully)Domain: The package is running on a Windows machine that is not on any domain. The network location is a Windows machine on a domain.Security: The network location folder (\servernamefolderfile.txt) has no security, namely anyone can access any file to read/write/delete/etc. I can manually add and delete files as well as add and delete files when the package runs through BIDS or when I manually run it through management studio.Permissions: I have created a login, security credential, and proxy which I am using to run the package. The security credential is tied to the Administrator account on the local machine.
Error Message: Executed as user: COMPUTER-NAMEAdministrator. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:05:37 PM Error: 2007-06-19 12:05:39.25 Code: 0xC001401E Source: DataTransfer Connection manager "FILECONNECTION.FileConnection" Description: The file name "\servernamefolderflatfile.txt" specified in the connection was not valid. End Error Error: 2007-06-19 12:05:39.25 Code: 0xC001401D Source: DataTransfer Description: Connection "FILECONNECTION.FileConnection" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:05:37 PM Finished: 12:05:40 PM Elapsed: 2.297 seconds. The package execution failed. The step failed.
(note: I replaced the fileconnection strings with FILECONNECTION and the serverpath with "servernamefolder" for privacy reasons.
Any help would be greatly appreciated. This is some sort of security issue with SQL Agent. But, the error claims that the user is running as localmachineAdministrator. Isn't this how the package would run if I manually execute it?
Hi
In the "Choosing Between SQL Server 2005 Compact Edition and SQL Server 2005 Express Edition" white paper, i can read that: "SQL Server 2005 Compact Edition support data file storage on a network share" and "Number of concurrent connections = 256"
But when i try to connect with two different PC at the same time to a .sdf file store on a network share, i have an error message : "File is locked by an other processus"
The firsth PC is connected but the secondth can't
";Mode=Read Write" in the connection string don't change anything.
anybody have an idea ?
I am running Microsoft SQL Server 2012 SP on a Windows Server 2008 R2 Standard SP1 box. The SQL Server service is running as a simple windows domain user (nothing special, no admin rights, etc.) I am having some issues with using Bulk Insert when the data file is on a network share when using Windows Authentication. What is known is that the SQL Server service account has access to the network resource, which is shown by logging into SQL Server with a SQL account and doing the Bulk Insert. I also have rights to the files on the share, as shown by the fact that I put the files there. My SQL is in the form of:
Bulk Insert [table name] From '[server][share][filename]' With (FirstRow = 2, FormatFile='FormatFile.xml')
Now, when connecting to SQL Server with Windows Authentication and running the Bulk Insert I get the following error:
Msg 4861, Level 16, State 1, Line 2 Cannot bulk load because the file "[server][share][filename]" could not be opened. Operating system error code 5(Access is denied.).
I found this snip at
BULK INSERT (Transact-SQL)Security Account Delegation (Impersonation), which says, in part (emphasis mine):
To resolve this error [4861], use SQL Server Authentication and specify a SQL Server login that uses the security profile of the SQL Server process account, or configure Windows to enable security account delegation. For information about how to enable a user account to be trusted for delegation.
How to Configure the Server to be Trusted for Delegation, and we tried the unconstrained delegation and I rebooted the SQL server, but it still does not work. Later we tried constrained delegation and it still does not work.
I have verified the SPNs:
C:>setspn adsvc_sqlRegistered ServicePrincipalNames for CN=SVC_SQL,OU=Service Accounts,OU=Users,OU=ad domain,DC=ad,DC=local: MSSQLSvc/SQLQA.ad.local:1433 MSSQLSvc/SQLDev.ad.local:1433 MSSQLSvc/SQLQA.ad.local MSSQLSvc/SQLDev.ad.local
I have verified that my SQL connection is TCP and I am getting/using a Kerberos security token.
C:>sqlcmd -S tcp:SQLQA.ad.local,1433 -E1> Select dec.net_transport, dec.auth_scheme From sys.dm_exec_connections As dec Where session_id = @@Spid;2>
gonet_transport auth_scheme------------- -----------TCP KERBEROS(1 rows affected)1>
If I move the source file to a local drive (on the SQL server), all works fine, but I must be able to read from a file share?
Hello All,
I need some advise/help how to deploy a small sql server compact 3.5 database on networkshare where about 8 people have access to it(install de client ) and can modify the database with aprox 3000 records.
I'm using visual basic 2008 and created a compact database and filled it with one table of an export of an access database done with data port console.
And created a new windows forms application and saved the project.
Publish is not the problem but how too set it up......
There is not much info to find on how to get a sql server 3.5 database running on a network share.
Who can help ???
Thanks
Hi All,
Hopefully a painless and quick question to answer:
Am backing up the SQL2000 database(s) using the maintenance plan's under management in the Enterprise Manager.
All is fine however, we are running out of diskspace as the database grows, which is causing the backup to fail if I don't manually remove the nights before.
I have selected to delete old backup files however these files are deleted after the new file is generated and due to the lack of space the new one is not being generated....so in effect the older ones never get a chance to be deleted.
So I was wanting to know if it is at all possible to backup to a UNC path or share . I have tried however it raises an error saying it is not a valid path.
Any assistance here is hugly appreciated (asides from getting new disk - as this isn't a short term option at the moment)...
Cheers all
Troy
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
I am trying to set up log shipping in a clustered server environment. I am pretty confused about the location of the shared folder to be created to put backup created by log shipping job. Which drive should I use either local or clustered shared drive to store the backups in primary server and to copy the same in secondary Server?
View 2 Replies View RelatedHow do I backup SQL Server databases to disk over my network?
View 4 Replies View Relatedi try to create a dump device on a drive remote from the sql server(6.5),using machinenamefolderdump.dat. it creates the dump but when i tried to initial the backup it gives and error system that the device is offline. thanks in advance
View 1 Replies View RelatedIs it possible to have individual backup file for each DB, possibly in the form of DB_Name_YYYYMMDD.BAK while backing up on – NETWORK?
------------------------
I think, therefore I am - Rene Descartes
hello group,a few days ago i used the following backup statement and everthingworked fine:sp_addumpdevice 'disk','pipedump','\192.x.x.xLData est.bak'Backup database Test to pipedumpThe same statement is not working today!!!!!What's the reason?Please dont tell me that check if the network path exists or not! I'vechecked the path and permissions. Everything is ok!Thanks in advanceDebian*** Sent via Developersdex http://www.developersdex.com ***
View 11 Replies View RelatedI tying to test my backup to a network drive but it fails.
Please help ..thanks
this is the script -- example from BOL:
BACKUP DATABASE pubs
TO DISK '\radrisMSSQLBACKUPpubtest.bak'
this is the error:
Server: Msg 3201, Level 16, State 1, Line 1
Cannot open backup device '\radrisMSSQLBACKUPpubtest.bak'. Device error or device off-line. See the SQL Server error log for more details.
Server: Msg 3013, Level 16, State 1, Line 1
BACKUP DATABASE is terminating abnormally.
We get an error when we are trying to run a backup of the SQL db here, we just got a new ISP to this company and al the routers and the like has been reconfigured (if that might be the problem). Would apreciate a speedy help with this one.
Here is the error message we get
un OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: [DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 11 (B) Error string: [DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnError: DTSStep_DTSExecuteSQLTask_1, Error = -2147467259 (80004005) Error string: Connection failure Error source: Microsoft OLE DB Provider for SQL Server Help file: Help conte... Process Exit Code 1. The step failed.
Hi,
I want to take backup of my database over a network drive, the network drive is on a box which is on different domain,
Primary Server: IMM01
Database: DDR
Domain: PNR
User: PNRkpuser
Backup Drive: BMM02
Shared Folder: \BMM02BackupFolder
Domain: BNR
Thanks,
Imran.
We're trying to backup some dbs to a network drive but fail.
I read that the 'a/c to run SQLAgent must be a domain user a/c with
proper permission to access the network drive.'
What is proper permission? Read, Write ?
Only the a/c that runs SQLAgent needs the proper permission, the job's owner doesn't?!?
Thanks in advance,
Ben
Hi guys.
Has anyone ever done SQL DB backup directly onto a maped network drive?
We've got a really huge DB 100GB+ that just wont fit into the local Hard Disk for backup.
Thank you in advance for your help.
Cheers,
Stephen
I have creted a backup device on network drive and getting the following error when I run the backup command as a job.SQL server and the agent are running on a domain account which has full permission on the network drive.Any help is greatly appreciated.
Thanks!
"Cannot open backup device 'mccdiffbkpond2build'.
Device error or device off-line. See the SQL Server error
log for more details. [SQLSTATE 42000] (Error 3201) Backup or
restore operation terminating abnormally. [SQLSTATE 42000]
(Error 3013). The step failed"
I am setting up a backup on one of my DB's and the network drive does not appear as an location that I can backup too. Only the C drive is present. However, on the server I do have a drive mapped to the network drive, so it should be available. Has anyone encountered this issue before?
Thanks!
Scott
Hi all,
I have scheduled a backup on a remote machine. Everyday I FTP these backups from the remote machine to the local drive.
A local drive is maped to the remote machine in Windows NT Explorer but SQLSERVER7 Enterprise Manager can't see this drive so that I could do the backup to it.
Can any one please tell me how to make this work?
Thanks in advance.
Attaullah
If I dump 20GB DB to hard disk on same Server it takes approx. 2 hrs(give or take). If I dump same DB to tape, also approx 2 hrs. If I restore to same or different server on same hub it takes approx 2 hrs. However, if I dump to different server on same hup it takes 10 - 12 hrs.
E.G.
Dump 20 GB DB from server A to disk or tape on Server A -- 2 hrs.
Restore to Server A or Server B from disk on Server A -- 2 hrs.
Dump 20 GB DB from Server A to Server C -- 12 hrs. Same hub.
Restore Server D from Server C -- 2 hrs.
All 100mbps cards on fiber. Same hub.
Any suggestions as to why the difference when dumping across the network as opposed ro restoring across the network???
Bill