Backup/restoring On CD Drive
May 3, 2002Pls explain how to backup and restore data on SQL Server with a CD drive instead of tape drive.
This is urgent.
Thanks.
ADVERTISEMENT
Restoring Using Backup On Shared Drive
Jun 11, 2008Is this possible? I can only seem to restore when the *.bak is on a local drive which is ridiculous. I'm sure this translates to other operations in addition to restoring databases...
View 7 Replies View RelatedRestoring The Master To Different Drive Letters
Jul 20, 2005Can you restore the master database, running on windows server 2000, sqlserver 2000 from a backup that was taken from c: to another serverrestoring to d:?*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedRestoring Master,Model To Different Drive Letter
Jan 26, 2001Hi All,
I took a backup of master,model and msdb database which was on D: drive and i tried restore it on C:. Now if i try to start sql server it comes out with a erorr that model database cannot be found and it keeps looking for model in D: drive which is not there.I tried restore of model with move option but it says cannot drop model as its system database.I tried attach detach but it does not understand tempdb as temp db is also on d: and i cannot understand how to move or point it to c:
Suggestions will be greatly appreciated
Vishal
SQL 2012 :: How To Backup Half Of DBs From A Server On C Drive And Other Half On D Drive
Jan 16, 2015How to backup half of dbs from a server on C drive and the other half on D drive and vice versa, first half on D drive and other half On C drive using only one job and one stored procedure??
Using scheduling from job add 2 schedules to the job so first schedule backup first half to C and second half to D , the second schedule backup first half to D and second half to D.
DB Engine :: Compressed Backup While Restoring Backup File
Sep 8, 2015I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies View RelatedBackup To Flash Drive
Jul 20, 2005I have a utility I wrote which can backup/restore my database as wellas schedule backups. This has always worked pretty well except when Itry to backup to a USB Flash Disk. When I use one of these the backupfails. If I backup to the C:/ drive then copy it over to the disk itworks fine but when SQL Server tries to do it, it can't.I am simply doing the following:BACKUP DATABASE MyDatabase TO DISK = 'E:/backup.dat_bak' WITH INITAnyone know what could be going wrong?
View 3 Replies View RelatedBackup Db To Network Drive Problem
Nov 20, 2001We're trying to backup some dbs to a network drive but fail.
I read that the 'a/c to run SQLAgent must be a domain user a/c with
proper permission to access the network drive.'
What is proper permission? Read, Write ?
Only the a/c that runs SQLAgent needs the proper permission, the job's owner doesn't?!?
Thanks in advance,
Ben
BACKUP To Maped Network Drive
May 4, 2000Hi guys.
Has anyone ever done SQL DB backup directly onto a maped network drive?
We've got a really huge DB 100GB+ that just wont fit into the local Hard Disk for backup.
Thank you in advance for your help.
Cheers,
Stephen
Backup Fails On Network Drive???
Nov 14, 2000I have creted a backup device on network drive and getting the following error when I run the backup command as a job.SQL server and the agent are running on a domain account which has full permission on the network drive.Any help is greatly appreciated.
Thanks!
"Cannot open backup device 'mccdiffbkpond2build'.
Device error or device off-line. See the SQL Server error
log for more details. [SQLSTATE 42000] (Error 3201) Backup or
restore operation terminating abnormally. [SQLSTATE 42000]
(Error 3013). The step failed"
Network Drive Not Available In Backup Schedule
Oct 24, 2000I am setting up a backup on one of my DB's and the network drive does not appear as an location that I can backup too. Only the C drive is present. However, on the server I do have a drive mapped to the network drive, so it should be available. Has anyone encountered this issue before?
Thanks!
Scott
Backup To Non-local Hard Drive
Oct 19, 1998I want to perform backups to a network drive. I need to know if I can access the backup drive via UNC. I have not been able to get it to work and, for now, I would just like to know if what I am trying to do SHOULD work.
For example I want to backup to device mdtnts_prod02LM2BackupNameBack.DAT.
Thanks,Bob
How To Get The Drive Letter And The Backup Directory
Jan 16, 2008Hello,
I'm looking to get the drive letter and path for my backups programmatically. I am monitoring my sqlserver boxes remotely and need to get this information to determine if my backups will fit on the backup drive.
I'm looking for either a sql statement or a stored procedure to accomplish this.
For example...the backup script states:
EXECUTE master.dbo.xp_create_subdir N'H:MSSQLBackupmaster'
I need to know how this script gets H:MSSQLBackup
Thanks in advance.
[MSSQL7] Backup On Network Drive
Feb 2, 2004Hi there,
Does anyone know if it's possible to perform a MSSQL7 database backup on a network drive instead of the local drives ?
...and if yes, how to proceed ?
It seems to be possible under MSSQL2000.
Many thanks for your help in advance,
Matt
Unable To Backup To Tape Drive
Dec 17, 2007i have taken full database backup on tape drive one week ago,by automated scripts ,now when i check the maintenance plan history , it says the task failed and gives a message that unable to open the \. ape0 ,with error
([Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3201: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open backup device '\. ape0'. Device error or device off-line. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.
)
Cann't Able To Take Backup On Network Drive...........
Mar 17, 2008
HI
i am trying to take a backup on Network drive but i am getting following error message. althought when i try to type the address in window explorer. i can access the specific folder. so that there shouldn't be network security issue.... and even thought the backup device name is correct.
when i try to take backup on local disk, it work's fine....
Executed as user: NT AUTHORITYSYSTEM. Cannot open backup device 'FullBackup(\0.0.0.0SQL_BackupsFullBackupsFullBackup.bak)'. Operating system error 5(error not found). [SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Would You Please Suggest A Good Backup Tape Drive?
Jul 23, 2005First posting to the group. I have received a lot of valuable info from youguys. Now, an OT question:What's a good tape drive to perform unmanned weekly backups for a WindowsXP Pro box running SQL server 2000?--Joel Farris | AIM: FarrisJoel** Their Web. Your Way. http://getfirefox.com **
View 1 Replies View RelatedBackup To Network Drive Using Workgroup/Standard.
Jun 18, 2007I am using SQL Server 2005 Express Edition. I am planning on upgrading to either Workgroup or Standard edition. While working with Express Edition I did find out that this version does not support backup to a network drive.
My question is:
Is it possible to backup directly to a network drive using a Workgroup/ Standard edition of SQL Server rather than backing up to a local drive and then 'copy and paste' to a network drive like the Express Edition.My other question is :
Given a database limit of 50GB, which one of the editions, Workgroup or Standard, will be appropriate for use.Thank you for your time and patience.
Regards
Berly Sam
Backup On Local/Network Drive Using Maintenance Plan
May 27, 2007Hi,
I have created an sql server 2005 maintenance plan for a daily backup. The plan has two 'Back up database task' i.e. one backup on the local drive while the second on a network drive. When the plan is executed, a backup is created on the local drive but not on the network drive. If i check the log, it says "Access Denied" whereas i have full access to the network drive with complete permissions to read, write and delete.
Can anyone help me understand how to take a backup on both a local and network drive at the same time using a maintenance plan ? I shall be obliged...
Regards...
SQL Backup Continuosly Grows And Fills Up Drive Issue
Nov 1, 2007I currently have a SQL backup process that backs up my databases via the network to a backup hard drive on a separate system. I recently began getting strange issues with my backup process in which it continually writes to the backup drive until the drive fills up and then the job fails. I also noticed that when I kill the job on the host server, the backup file drops to the normal file size. The normal file size is 300 GB but it has grown to over 400GB. I looked at various logs and even performed several backup tests with success.
I am trying to figure out if this is a known SQL Server issue or an issue with the OS?
specs:
windows 64bit/sql server 2k5 64bit
Thanks in advance for the help.
Restore Clustered SQL Server 2000 From Backup On Local Drive
Aug 1, 2007We are attempting to restore one of our databases from a backup that went to a local drive on the server.
We see the backupset in the list but receive an error that it is not available when we try to use it. When we try to restore from device and select the files the drive letter is not available. When we attempt to enter the path to the file it can't locate it. We don't have space on our SAN to copy the backup there and we can't add the local drive to the cluster resources.
Is there a way to get this backup done?
Restoring A Backup
Aug 25, 2000HI everybody,
I have a problem in restoring a backup. In the restore command there is one option called <file> = 'file_number'. Where do we get this 'file_number'?.
tks in advance
Srini
Restoring A Backup From CD
Oct 11, 2001Hi Everyone, I was prototyping a DB and made a backup of all the files in the data directory of sql server, thinking that I would be able to restore the system from another installation when I made it to the US. I have the cd with the archives on and a full backup of the DB I want but I have no idea how to get sql server to initialise it.
Any ideas???
Steve
Restoring Backup
Jul 24, 2004Guys, i've 1.6 GB of backup size and it takes 1 hour for this backup to get restored over a SCSII 10,000 rpm.
Is it normal. How can i make the restore faster.
It takes only 5-10 mins to take the backup however.
I am restoring the full backup, no differential or log file.
Howdy!
Restoring A Backup
Dec 8, 2004I Have a full database backup of the database aaa ON a server xxxx. I want to restore the same back upto as a database aaa ON another server yyyy.For to achieve this do I need to make the database aaa ON server xxxx.
How can I do that.Please help me in this issue.
Thanks.
Backup And Restoring
Mar 25, 2007I used backup and restore to upgrade a database from sql 2000 to sql 2005. Is it necessary to create the mdf and ldf on the new server at the time of restore under options or should I copy them to the new server in the data folder? I am new and not quite sure what the log files hold.
Thanks
Restoring Backup
Sep 7, 2007Hi,
I am using SQL server 2000. When I want to restore a backup database from the disk. I use the Enterprise Manager tool to restore database. From there I checked Restore database and select from the first backup to restore. Do I need to backup the transaction log after? Or this does all of it?
Restoring A DB BackUP
Sep 27, 2006Hi,
I have a problem. I create a backup from a DB named Prueba (in full mode). But when I try to restore it in a new server the Prueba backup is loaded, and appear a message that said so. But in the DB list next to his name(Prueba) appear a "(Restoring)" ... The DB is not so big (i didnt know why is taking so long or whats the prblem) and i cannot do anything whit it because it doesn t show the tables or any info.
Thanks for the help ..
I really thanks.
Hernan
Restoring A Backup
Nov 6, 2007Hi there, I'm from Argentina. I have an SQL backup made with SQL Server 2005 Developer Edition. I want to restore this backup into a Server with SQL Server 2005 Express Edition. Can this be possible? Thanks.
View 3 Replies View RelatedError 18210 Backup Up SQL Server 2005 Database To Network Drive
Aug 1, 2007I have 2 different servers that run nightly backup jobs to a network drive using the UNC format. I am noticing the larger databases encountering the following errors on a regular basis
Error: 18210, Severity: 16, State: 1.
'\fnfssql3SQLBackupsMNSQL05<database>.BAK'. Operating system error 64(The specified network name is no longer available.).
BACKUP failed to complete the command BACKUP DATABASE <database>. Check the backup application log for detailed messages.
There are 5 databases on this server all backed up by the same job and 3 of them wortk fine and 2 of them fail so it is not a permissions problem. Have there been any problems with backing up to a network drive in 2005?
Unable To Access VM Network Drive In SQL During Backup Generated By Stored Procedure
Mar 12, 2007 I get the following error in a log file created in the osql command:
Msg 3201, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
Cannot open backup device 'x:Servername_master_sqlbu_200703101930.bkf'.
Device error or device off-line. See the SQL Server error log for more
details.
Msg 3013, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
BACKUP DATABASE is terminating abnormally.
The device is established in a CMD file right before the osql command is started that starts my stored procedure. The CMD in this file is:
for /f "tokens=15 delims=." %%i in ('ipconfig^|find "IP Address"^|find "192.168"') do set SUBNET=%%i
:loop
if exist x: net use x: /del
net use x: \192.168.%SUBNET%.1ackup
if not ERRORLEVEL 1 (
goto continue
) else (
echo FAILED TO CONNECT TO BACKUP SERVER >> "%SystemDrive%LogFiles\%Computername%.log"
sleep 60
goto loop
)
:continue
echo IP ADDRESS OBTAINED
Echo delete old log file if it exists
if exist %3\%computername%_kaman_full_sqldb_backup_old.log del /Q %3\%computername%_kaman_full_sqldb_backup_old.log
Echo Rename log file to old.log
rename %3\%computername%_kaman_full_sqldb_backup.log %computername%_kaman_full_sqldb_backup_old.log
echo backup SQL Databases on server will start now
osql -E -n -d %1 -i %2kaman_full_sqldb_backup.sql -h-1 -o %3\%Computername%_kaman_full_sqldb_backup.log
In the stored procedure I try to use the x: drive and that does not work. I have tried obtaining the \192.168.x.x address and that only works on some of my servers. All are running SQL 2000, some are using Win2K and Win2003. It does not seem to matter. One of them that is using Win2003 only fails occationally.
I notice when I do a
exec master..xp_cmdshell 'x:'
The system cannot find the drive specified.
Yet, when I go to the server there is an x drive.
I am using the sqlserv user to run the job and that use is an administrator on the local machine. This is a virtual machine. We add the X before the osql and drop it after the command finishes.
Any help would be appreciated. Thanks, dbmsql
Restoring Sql 2000 Backup On Sql 7
Sep 11, 2006Hi,I am working in a sql server 2000 environment but my customer uses sql server 7. Is it possible to use backup and restore to transfer the database or should I set up a sql server 7 for development?The database only contains tables and views...ThanksKoen
View 1 Replies View RelatedRestoring Backup From 1 Server To Another
May 12, 1999I want to create a database that is identical to one I currently have for testing purposes. I took a backup and tried to restore it to
another server to actually create the database. It wouldn't work, then I created the database on that server and gave it the exact
name and file layout (dbid was different) and tried to restore the backup to the newly created database. Still would not restore.
I am using SQL 7 for backkup and restore. The backup device backs up to disk on the servers. What I am doing wrong?