Backup To Network Drive Using Workgroup/Standard.
Jun 18, 2007
I am using SQL Server 2005 Express Edition. I am planning on upgrading to either Workgroup or Standard edition. While working with Express Edition I did find out that this version does not support backup to a network drive.
My question is:
Is it possible to backup directly to a network drive using a Workgroup/ Standard edition of SQL Server rather than backing up to a local drive and then 'copy and paste' to a network drive like the Express Edition.My other question is :
Given a database limit of 50GB, which one of the editions, Workgroup or Standard, will be appropriate for use.Thank you for your time and patience.
Regards
Berly Sam
View 4 Replies
ADVERTISEMENT
Nov 20, 2001
We're trying to backup some dbs to a network drive but fail.
I read that the 'a/c to run SQLAgent must be a domain user a/c with
proper permission to access the network drive.'
What is proper permission? Read, Write ?
Only the a/c that runs SQLAgent needs the proper permission, the job's owner doesn't?!?
Thanks in advance,
Ben
View 1 Replies
View Related
May 4, 2000
Hi guys.
Has anyone ever done SQL DB backup directly onto a maped network drive?
We've got a really huge DB 100GB+ that just wont fit into the local Hard Disk for backup.
Thank you in advance for your help.
Cheers,
Stephen
View 3 Replies
View Related
Nov 14, 2000
I have creted a backup device on network drive and getting the following error when I run the backup command as a job.SQL server and the agent are running on a domain account which has full permission on the network drive.Any help is greatly appreciated.
Thanks!
"Cannot open backup device 'mccdiffbkpond2build'.
Device error or device off-line. See the SQL Server error
log for more details. [SQLSTATE 42000] (Error 3201) Backup or
restore operation terminating abnormally. [SQLSTATE 42000]
(Error 3013). The step failed"
View 1 Replies
View Related
Oct 24, 2000
I am setting up a backup on one of my DB's and the network drive does not appear as an location that I can backup too. Only the C drive is present. However, on the server I do have a drive mapped to the network drive, so it should be available. Has anyone encountered this issue before?
Thanks!
Scott
View 10 Replies
View Related
Feb 2, 2004
Hi there,
Does anyone know if it's possible to perform a MSSQL7 database backup on a network drive instead of the local drives ?
...and if yes, how to proceed ?
It seems to be possible under MSSQL2000.
Many thanks for your help in advance,
Matt
View 6 Replies
View Related
Mar 17, 2008
HI
i am trying to take a backup on Network drive but i am getting following error message. althought when i try to type the address in window explorer. i can access the specific folder. so that there shouldn't be network security issue.... and even thought the backup device name is correct.
when i try to take backup on local disk, it work's fine....
Executed as user: NT AUTHORITYSYSTEM. Cannot open backup device 'FullBackup(\0.0.0.0SQL_BackupsFullBackupsFullBackup.bak)'. Operating system error 5(error not found). [SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 6 Replies
View Related
May 27, 2007
Hi,
I have created an sql server 2005 maintenance plan for a daily backup. The plan has two 'Back up database task' i.e. one backup on the local drive while the second on a network drive. When the plan is executed, a backup is created on the local drive but not on the network drive. If i check the log, it says "Access Denied" whereas i have full access to the network drive with complete permissions to read, write and delete.
Can anyone help me understand how to take a backup on both a local and network drive at the same time using a maintenance plan ? I shall be obliged...
Regards...
View 2 Replies
View Related
Aug 1, 2007
I have 2 different servers that run nightly backup jobs to a network drive using the UNC format. I am noticing the larger databases encountering the following errors on a regular basis
Error: 18210, Severity: 16, State: 1.
'\fnfssql3SQLBackupsMNSQL05<database>.BAK'. Operating system error 64(The specified network name is no longer available.).
BACKUP failed to complete the command BACKUP DATABASE <database>. Check the backup application log for detailed messages.
There are 5 databases on this server all backed up by the same job and 3 of them wortk fine and 2 of them fail so it is not a permissions problem. Have there been any problems with backing up to a network drive in 2005?
View 4 Replies
View Related
Mar 12, 2007
I get the following error in a log file created in the osql command:
Msg 3201, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
Cannot open backup device 'x:Servername_master_sqlbu_200703101930.bkf'.
Device error or device off-line. See the SQL Server error log for more
details.
Msg 3013, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
BACKUP DATABASE is terminating abnormally.
The device is established in a CMD file right before the osql command is started that starts my stored procedure. The CMD in this file is:
for /f "tokens=15 delims=." %%i in ('ipconfig^|find "IP Address"^|find "192.168"') do set SUBNET=%%i
:loop
if exist x: net use x: /del
net use x: \192.168.%SUBNET%.1ackup
if not ERRORLEVEL 1 (
goto continue
) else (
echo FAILED TO CONNECT TO BACKUP SERVER >> "%SystemDrive%LogFiles\%Computername%.log"
sleep 60
goto loop
)
:continue
echo IP ADDRESS OBTAINED
Echo delete old log file if it exists
if exist %3\%computername%_kaman_full_sqldb_backup_old.log del /Q %3\%computername%_kaman_full_sqldb_backup_old.log
Echo Rename log file to old.log
rename %3\%computername%_kaman_full_sqldb_backup.log %computername%_kaman_full_sqldb_backup_old.log
echo backup SQL Databases on server will start now
osql -E -n -d %1 -i %2kaman_full_sqldb_backup.sql -h-1 -o %3\%Computername%_kaman_full_sqldb_backup.log
In the stored procedure I try to use the x: drive and that does not work. I have tried obtaining the \192.168.x.x address and that only works on some of my servers. All are running SQL 2000, some are using Win2K and Win2003. It does not seem to matter. One of them that is using Win2003 only fails occationally.
I notice when I do a
exec master..xp_cmdshell 'x:'
The system cannot find the drive specified.
Yet, when I go to the server there is an x drive.
I am using the sqlserv user to run the job and that use is an administrator on the local machine. This is a virtual machine. We add the X before the osql and drop it after the command finishes.
Any help would be appreciated. Thanks, dbmsql
View 6 Replies
View Related
Oct 29, 2007
I am trying to install the SQL Sever 2005 Workgroup Edition software that came with our Small Business Server 2003 R2 system. I would like to install to the d: drive because space on the c: drive is limited. Can I do that? If so, how?
View 1 Replies
View Related
Jul 18, 2007
I would like to ask regarding sa performance difference between the two version of SQL 2005. Which is better the SQL 2005 workgroup or the standard edition..?
Darren Bernabe Blanco
View 1 Replies
View Related
Jul 6, 2007
We have got the wrong version of SQL Server 2005 due to not having SSIS. We have loads of DTS packages running and I have tried to import them and its shows no SSIS service installed.
Is the route to upgrade straight forward? We have a couple of databases running on 2005 upgraded from 2000 but most still are active on 2000.
Cheers
Scott
View 1 Replies
View Related
Apr 10, 2007
I have a WORKGROUP network with 2 SQL Server 2005 servers. I want to configure for log shipping.
When I try and set up the 'Secondary Database Settings', and try and run the process, it gets an error saying it cannot access the backup file (the secondary cannot access the backup file on the primary). The file is there. It is shared. I have created local accounts on both machines called 'SyncAccount', and have given full control over the shared directory (on the primary) and local directory on the secondary. I have chaged the SQL Agent to use the local account.
TITLE: Microsoft SQL Server Management Studio
------------------------------
SQL Server Management Studio restore database 'ISC'
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (SqlManagerUI)
------------------------------
Cannot open backup device '\FAtBOYISCISC.bak'. Operating system error 5(Access is denied.).
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
I have tested access for the created user by doing a "runas" from the command prompt.
I have invested hours in this. I have found several relevent artcles, but have not found the answer.
What is wrong with this thing?
View 3 Replies
View Related
Feb 2, 2007
I am putting up a website this month, its pretty complex in terms of the data being stored. We expect to have 1000 users in our first month and grow exponentially from there. In addition, users will be uploading content to the site (mostly jepgs and PDFs).
We currently have a dedicated server and need to decide whether to go with Microsoft SQL Server Workgroup or Standard. Any advice on this?
If we went with workgroup, what is the threshold for the number of users before we would have to switch to standard? Also...are there any huge limitations that would make our site fail if we went with workgroup?
thanks,
sb
View 8 Replies
View Related
Jul 26, 2007
I will be installing a new, SBS2003 R2 server that comes with SQL 2005 Workgroup Edition. We currently have a SQL 2000 Standard server. Can I installed SQL2000 Standard on SBS2003 R2? The reason for this is that we're not ready to migrate to SQL2005 and we need to continue running SQL2000.
Thanks.
View 1 Replies
View Related
Feb 28, 2007
Can I use Reporting Services 2005 in a workgroup to serve reports for a windows application which is distributed accross the network?
I've already tried but when the application on a client pc requested a report from the report server i got a message about not having enough permissions to see the report. The windows application was builded using VB .NET 2.0 and VS2005.
The report server instance is installed on a server 2003 enterprise along with the SQL Server 2005.
If this is possible how can set permisions or make my application to be able to requests and show reports?
Thanks a lot to anybody who takes the time to answer.
Antonio Alfaro
View 1 Replies
View Related
Aug 30, 2006
Hi,
I am new to SQL Server and I am trying to install SQL Server 2005 Express or Stnadard Edition on a computer runing XP pro on a XP's workgroup network using a router. Can I access the the database from another computer running XP pro on the same network? If I can, what setting do I need when installing SQL 2005 in order to do this?
Any help is appricated.
View 1 Replies
View Related
Jan 25, 2007
Hi, all. I see two conflicting notes about whether one can install the SQL Server 2005 Trial/Evaluation and then upgrade to Workgroup or Standard editions, without uninstalling the Evaluation edition.
http://msdn2.microsoft.com/en-us/library/ms143393.aspx seems to say YES, you can upgrade to Workgroup/Standard from the Evaluation edition.
http://www.microsoft.com/sql/howtobuy/faq.mspx says NO, you can only upgrade to Enterprise edition from the Evaluation edition. For Workgroup and Standard, you must uninstall the Trial first.
Which is the correct answer?
Thanks,
Stephen
View 3 Replies
View Related
Apr 24, 2008
I have an SSIS package which accesses a map UNC path drive. It works fine when I run SSIS from Visual Studio. However, when I run this from a SQL Server job, it gives an error.
I am not allowed to use xp_cmdshell due to security reasons. If someone can point me to right direction, that would be greatly appricated.
Thanks
Z
View 20 Replies
View Related
Jul 23, 2005
Hi,When i use to work on Windows 2000 advance server and Sql 2000I was able to do network restoration by using a mapped drive where mybackup use to be lying.What i did was I assigned administrator rightsto my login and in Services (mssqlserver)i added my login.Then I was able to access any mapped drive from my network in Sqlserver 2000.Now i have switched my OS to Windows Server 2003.What I want to know is , is their any other setting that has to donefor network restoration , because after following above steps then to Iam not able to access mapped drive in SQL SERVER 2000.So can anyone help me to know what setting should i do in Windows 2003server or in SQL Server 2000 to do a network restoration of database.Thanks in advanceTV
View 1 Replies
View Related
Sep 12, 2007
Hi I have a simple ftp task that downloads some files from an ftp to a local directory. That package run as a sheduled job from the sql 2005 server without a problem so far.
Now I whant to have the same task but to download the files to different mapped network drives , so I mapped the drives then I changed the paths to the config file but since then the job fails...
is it possible to do that or I did something wrong?
Thanks
g
View 4 Replies
View Related
Jan 15, 2007
Hello,
I need help with the setup of my sql server express 2005 and more specifically, with the location of the database files. Normally, database files are located on the c: drive. In my situation, being in a high school environnement, I need to have the database files on the network drive ... lets call it g:drive. The reason why it cannot be on c:drive is because this drive is protected using DeepFreeze. Now, I was able to change the location of the new drive as I went into the properties window of the sql server instance but when I try to create this new database, sql gives me grief ;-|
I am from the group of people that thinks that to anything, there is a solution and am hoping that to this problem, there is hope of a solution.
Can anyone help?
Thank you
View 1 Replies
View Related
Nov 25, 2001
I am using SQL2K server. I have a scheduled job which invokes a DTS package. One of the tasks in the DTS package invokes an OS command (from a .bat file) to map a network drive to b made available (dynamically, referring to a mapped drive letter, say "Y" or "Z") in successive tasks to refer to a source or destination TEXT file(s). Basically, the DTS package must be able to refer to the TEXT files (source/destination, depending on the task I have) located somewhere in the network. [ I use the NET USE command in the .bat file to map the network drive.)
The DTS package works stand-alone from SQL Enterprise Manager.
But, when the package is invoked from a scheduled job, the step containing the DTS package fails - the task which maps the network drive fails - access violation /session error...
How do I handle the batch job to overcome this problem?
I appreciate tips/solutions from anyone....
Thanks.
K.K.Rengan
View 1 Replies
View Related
Oct 23, 1998
I need to know if there is a way to perform a SQL Server 6.5 backup to a remote network drive WITHOUT USING A TRUST LOGIN.
My network administrator refuses to put a TRUST relation on the Primary Domain Controller. I`m not really sure why, but I need a workaround.
Thanks,
"Work-around Bob"
View 1 Replies
View Related
Nov 29, 2007
I know , it is not going to work , just wondering if anyone could give any reasons for that. Whether it was intentional constraint or just internally compact edition was designed in particular way which makes such a usage not possible. It is a pity that it doesn't work that way as it would be much easier transitional path for many Visual Foxpro , MS Access applications.
In my case I just want READ-ONLY database either for multi-user access via shared drive or stand-alone on local drive.
View 1 Replies
View Related
Oct 4, 2006
Sql server prompts "access denied"
while firing the following query
EXEC master..xp_cmdshell 'dir \servernamesharedfolder*.* '
how to access the folders and files existing in network drive.
View 3 Replies
View Related
Oct 13, 2000
In 6.5 , I was NOT able to use mapped network drive for new database
device if the MSSQLSERVER service is running under local system account,
but if I changed it to using a domain a/c which has the authority to
create files on mapped drive, I was able to do it.
But if I tried it in 7.0, it never work and got msg:
Server: Msg 5105, Level 16, State 2, Line 1
Device activation error. The physical file name 'e:est2.mdf' may be
incorrect.
Server: Msg 1802, Level 16, State 1, Line 1
CREATE DATABASE failed. Some file names listed could not be created. Check
previous errors.
Is it something that's normal for 6.5 and 7.0 ????
i.e. we can only create databases on LOCAL drives ?
I am just thinking of in case we run of space locally, we can temporarily
make use of remote mapped network drive. (say at time of upgrading)
Any one has this experience ?
View 2 Replies
View Related
Aug 6, 2003
I am new to the DB Administration.
How do i back up the data to a network drive mapped on a day to day basis.
View 4 Replies
View Related
Jul 11, 2007
Good Morning,
I'm hoping that someone can help me. I have a SQL 2005 SSIS package that will run Friday mornings to empty/load a table with data from another database. On Friday evenings I'll need to run another package, but want to make sure the table load completed prior to launch. For this I planned to use a file watcher task, however I cannot for the life of me figure out how to output a 'done' semaphore, from the morning job, to a networked drive.
A file system task will not work because there is not a 'create file' option. I do not have an existing file that I can rename either.
I tried an execute process task running cmd.exe with the following argument:
Code Snippetecho Done> \NetworkedServerftprootLoad.Done
This fails because UNC paths are not recognized. (The package executes from another server so I cannot use a local path, nor am I allowed to set-up a local share.)
Can someone offer an alternative suggestion? I'm really hoping this is easier than I'm making it.
Thank you in advance,
Roger
View 3 Replies
View Related
Mar 20, 2007
We have a package that is using a ForEach loop container to access files on a network drive. For some reason I am getting a message that the ForEach enumerator is empty and did not find any files that matched the pattern. For the pattern I left the default *.* for testing purposes. I have specified the file folder as \remoteserverfilesharesubfolder and also as \remoteserverc$filesharesubfolder and have gotten the same message. However when I map a network drive and set the file folder to the network drive it finds the files. Is this a permissions issue?
After I finish processing the file I want to move it to a new directory. Once this is deployed in production, the package will not be running under a domain account and probably won't have access to the network folder. Is there any way to specifiy in the connection manager itself that it should use a specific account to access the folder?
TIA,
Sabrina
View 1 Replies
View Related
Dec 8, 2007
I have a network drive that is mapped as Z: on my local machine. When creating a new database, that drive does not show up in the list of available paths. If I try to hardcode the drive/path info, I get an error message: "The system cannot find the path specified."
View 1 Replies
View Related
Jan 6, 2000
Hi
I am having an Access database on a shared network drive which has read/write access rights on the that shared network drive.
When I try to Access data through the linked server it gives me gives me a message box saying you do not have permissions to view the data.
Also if i try to use xp_cmdshell to copy over the mdb file to my local drive it say 'Access denied'
But when I copy (through command prompt) the same file to another network drive or my local drive where I have full control the linked server can connect sucessfully.
The problem is the i cannot have 'full control' permissions on shared drive where my database resides.
Has anybody encountered this problem....
Any help will be greatly appreciated.
Urgent
Puru
View 1 Replies
View Related
